Is the SD card supported on the JAM ?
Ronv said:
Is the SD card supported on the JAM ?
Click to expand...
Click to collapse
All i can say that the MDAc runs fine with this stuff....
Guido
Seems to be working fine for me....
TNX
Anonymous said:
Seems to be working fine for me....
Click to expand...
Click to collapse
My access point needs an acsii key for WPA, but the sandisk wants a numeric code for WPA ... do you know how to convert between the two?
TIA
Guido K said:
Ronv said:
Is the SD card supported on the JAM ?
Click to expand...
Click to collapse
All i can say that the MDAc runs fine with this stuff....
Guido
Click to expand...
Click to collapse
Will you send us your drivers and installation procedures to help us make it work...?ROM Version?
Related
Hello to all. I made a bad mistake with my german mda compact. Now is on start screen just serial v 1.00 or usb v 1.00
But i'am an absolut newbie and i found only howto's to change from german to english or italian. I think, all i need is the german original rom to update thru a sd card. Could anybody help me out? I promise, i never will play with this MDA ;-) thanks...Guido
Guido K said:
Now is on start screen just serial v 1.00 or usb v 1.00
Click to expand...
Click to collapse
I had the same problem yesterday.
Do a soft reset.
You probably didn't overwrite the header properly or you're using a bad ROM.
27 said:
Guido K said:
Now is on start screen just serial v 1.00 or usb v 1.00
Click to expand...
Click to collapse
I had the same problem yesterday.
Do a soft reset.
You probably didn't overwrite the header properly or you're using a bad ROM.
Click to expand...
Click to collapse
I tried to use a update for MDA II. It started, told me wich Version is in MDA, which version will be installed.It starts proper, wrote me: Wrong Handy and finish. Since this i just have a nearly dark grey display with this words as described.
Were you trying the Imate Rom or English T-Mobile ROM?
27 said:
Were you trying the Imate Rom or English T-Mobile ROM?
Click to expand...
Click to collapse
I tried now nothing. I thougt the XDA II soft is ok for my MDA compact. Since this i just looking for a german Version.
Anonymous said:
27 said:
Were you trying the Imate Rom or English T-Mobile ROM?
Click to expand...
Click to collapse
I tried now nothing. I thougt the XDA II soft is ok for my MDA compact. Since this i just looking for a german Version.
Click to expand...
Click to collapse
OK.
So you tried to load the XDA II ROM on the MDA compact.
And now you have a blank screen.
And both resets are not working?
27 said:
Anonymous said:
27 said:
Were you trying the Imate Rom or English T-Mobile ROM?
Click to expand...
Click to collapse
I tried now nothing. I thougt the XDA II soft is ok for my MDA compact. Since this i just looking for a german Version.
Click to expand...
Click to collapse
OK.
So you tried to load the XDA II ROM on the MDA compact.
And now you have a blank screen.
And both resets are not working?
Click to expand...
Click to collapse
That is right. :?
Did you back up the original ROm fro the MDA?
What language was it?
27 said:
Did you back up the original ROm fro the MDA?
What language was it?
Click to expand...
Click to collapse
no....before i made this failure i never heard about the possibility of backing up ROM. I have baclup made with sprite backup. It is on my SD Card. But i think u do not mean this....
Anonymous said:
27 said:
Did you back up the original ROm fro the MDA?
What language was it?
Click to expand...
Click to collapse
no....before i made this failure i never heard about the possibility of backing up ROM. I have baclup made with sprite backup. It is on my SD Card. But i think u do not mean this....
Click to expand...
Click to collapse
German language was installed. and that i need back. Like a virgin...
Anonymous said:
no....before i made this failure i never heard about the possibility of backing up ROM. I have baclup made with sprite backup. It is on my SD Card. But i think u do not mean this....
Click to expand...
Click to collapse
Ok.
Is it possible to load the backup from the Bootlaoder mode?
27 said:
Anonymous said:
no....before i made this failure i never heard about the possibility of backing up ROM. I have baclup made with sprite backup. It is on my SD Card. But i think u do not mean this....
Click to expand...
Click to collapse
Ok.
Is it possible to load the backup from the Bootlaoder mode?
Click to expand...
Click to collapse
I don't know. I think it is just a backup of all installed software...but a exe file called backup_2005-01-15
Anonymous said:
27 said:
Anonymous said:
no....before i made this failure i never heard about the possibility of backing up ROM. I have baclup made with sprite backup. It is on my SD Card. But i think u do not mean this....
Click to expand...
Click to collapse
Ok.
Is it possible to load the backup from the Bootlaoder mode?
Click to expand...
Click to collapse
I don't know. I think it is just a backup of all installed software...but a exe file called backup_2005-01-15
Click to expand...
Click to collapse
I u want we can chat aim : vnetm or skype: koronkai
Anonymous said:
I don't know. I think it is just a backup of all installed software...but a exe file called backup_2005-01-15
Click to expand...
Click to collapse
I'd advise you to find out if it's possible.
http://www.compactjam.com/forum/forum_posts.asp?TID=217
27 said:
Anonymous said:
I don't know. I think it is just a backup of all installed software...but a exe file called backup_2005-01-15
Click to expand...
Click to collapse
I'd advise you to find out if it's possible.
Click to expand...
Click to collapse
I think my card has to be empty. Just this file?
Anonymous said:
27 said:
Anonymous said:
I don't know. I think it is just a backup of all installed software...but a exe file called backup_2005-01-15
Click to expand...
Click to collapse
I'd advise you to find out if it's possible.
Click to expand...
Click to collapse
I think my card has to be empty. Just this file?
Click to expand...
Click to collapse
No...nothing happens at all. Just my known letters : serial v 1.00
Anonymous said:
I think my card has to be empty. Just this file?
Click to expand...
Click to collapse
See if there's any info here
http://www.spritesoftware.com/products/sprite_backup.html
My German ROM is about 900MB. I think it's 'cos I used a 1GB card.
I'll be away from the internet for the next few hours. Maybe you can try using the English ROM.
You need to be logged in to download from this site.
http://www.compactjam.com/forum/forum_posts.asp?TID=53&PN=2
http://www.compactjam.com/forum/forum_posts.asp?TID=252&PN=1
27 said:
Anonymous said:
I think my card has to be empty. Just this file?
Click to expand...
Click to collapse
See if there's any info here
http://www.spritesoftware.com/products/sprite_backup.html
My German ROM is about 900MB. I think it's 'cos I used a 1GB card.
I'll be away from the internet for the next few hours. Maybe you can try using the English ROM.
You need to be logged in to download from this site.
http://www.compactjam.com/forum/forum_posts.asp?TID=53&PN=2
http://www.compactjam.com/forum/forum_posts.asp?TID=252&PN=1
Click to expand...
Click to collapse
okay...i thing i need exact this rom file. But i try to find out whats going on. It was very nice from u to pick me up for a try. Cu and thank u again...Guido
Anonymous said:
okay...i thing i need exact this rom file. But i try to find out whats going on. It was very nice from u to pick me up for a try. Cu and thank u again...Guido
Click to expand...
Click to collapse
You're welcome.
What have you tried? Has it worked?
I have a qtek s200 and when i try to connect to pc doesn;t connect!! I have active syng installed in pc!! Any way to connect??
andrei16 said:
I have a qtek s200 and when i try to connect to pc doesn;t connect!! I have active syng installed in pc!! Any way to connect??
Click to expand...
Click to collapse
Do you get an error code?
l3v5y said:
Do you get an error code?
Click to expand...
Click to collapse
No!! I resolve that problem!! it was from usb cable!!
andrei16 said:
No!! I resolve that problem!! it was from usb cable!!
Click to expand...
Click to collapse
Good! Now you can flash a ROM
l3v5y said:
Good! Now you can flash a ROM
Click to expand...
Click to collapse
How?? I have problem with the 6.0 win !! the memory card is not view always!!
andrei16 said:
How?? I have problem with the 6.0 win !! the memory card is not view always!!
Click to expand...
Click to collapse
The memory card is not required to flash a ROM...
l3v5y said:
The memory card is not required to flash a ROM...
Click to expand...
Click to collapse
if you have yahoo messenger id please add andrei14_numberone to help me!! I wanna flash with win 6.1 or 7!
andrei16 said:
if you have yahoo messenger id please add andrei14_numberone to help me!! I wanna flash with win 6.1 or 7!
Click to expand...
Click to collapse
WM7 is not going to be available until 2009 at the earliest... If you want to flash a ROM, read the WM6 upgrade guide sticky in the Prophet mobile 6 forum.
PhamQuang is fabulous. All his Roms are super fast. Here's the link to his webpage: http://www.pdaviet.net/showthread.php?t=29312
and also his new v25: http://rapidshare.com/files/129462477/POLARIS_WM6.1_v1.60.08.25_B19965.7z
Password for the archive: PhamQuang
It works better than v24?
Build 19965.1.2.3
Anyone know what device that's from??
cr1960 said:
Build 19965.1.2.3
Anyone know what device that's from??
Click to expand...
Click to collapse
Probably Raphael
It is very very fast
cr1960 said:
Build 19965.1.2.3
Anyone know what device that's from??
Click to expand...
Click to collapse
It's still from Diamond
Any difference from V24 ?
cr1960 said:
Build 19965.1.2.3
Anyone know what device that's from??
Click to expand...
Click to collapse
That's from a Raphael
AllTheWay said:
That's from a Raphael
Click to expand...
Click to collapse
anybody has a shipped source ROM of this for porting to Elfin?
IGO plus 2006 is not working on this ROM.....
TCPMP is not working
even when reverting AKU to 0.4.5?
kufor said:
even when reverting AKU to 0.4.5?
Click to expand...
Click to collapse
How to revert?
Thanx
HKLM\System\Versions\Aku
0.4.5
(backup old value)
kufor said:
HKLM\System\Versions\Aku
0.4.5
(backup old value)
Click to expand...
Click to collapse
Thanx for your answer!
I lost with the Aku,
you can change the Value?
iGO v8.0.0.41506 is work OK
CorePlayer....................OK
cheers
that's what i need Jose
thanks
i'm not happy with swtos' light rom, because it slowes down sometimes without any reason, some apps don't work at all
that's why i'm going to flash back to pdaviet
Jose Antonio said:
TCPMP is not working
Click to expand...
Click to collapse
Hi,
Here is one version of TCPMP which is working.
http://forum.xda-developers.com/showpost.php?p=2061081&postcount=1
gpaunescu said:
Hi,
Here is one version of TCPMP which is working.
http://forum.xda-developers.com/showpost.php?p=2061081&postcount=1
Click to expand...
Click to collapse
Thank, this version is working. OK
hi all,
i downloaded the last version of radio rom to my polaris...but after that my device cant see my storage card anymore.
wat can i do...
by the way, i tried to hard reset my device but without benefit.
Did you flash it with microSD inside ???
batista70 said:
Did you flash it with microSD inside ???
Click to expand...
Click to collapse
Hi batista since i flash my polaris i never put out my microSD and have not any problem
thanx all 4 taking care...
i reupdate the radio rom & now it's all work out ....
thnx again
pafimal said:
Hi batista since i flash my polaris i never put out my microSD and have not any problem
Click to expand...
Click to collapse
It's suggested to flash without, i don't know why.
smoken said:
thanx all 4 taking care...
i reupdate the radio rom & now it's all work out ....
thnx again
Click to expand...
Click to collapse
I'm glad you solve
I can't seem to find any.
ejpyle said:
I can't seem to find any.
Click to expand...
Click to collapse
umm fixxxer's, sushirom, icerom, cbcp, darchdroid i think too.
sdotcarlisle said:
umm fixxxer's, sushirom, icerom, cbcp, darchdroid i think too.
Click to expand...
Click to collapse
I think fixxxer's you have to have your SD card partitioned. I dont have mine done that way. Are the rest of those on 2.1?
here you go. http://tinyurl.com/24v9oqw
ejpyle said:
I think fixxxer's you have to have your SD card partitioned. I dont have mine done that way. Are the rest of those on 2.1?
Click to expand...
Click to collapse
For fixxxers Rom you do not need to partition your sd. I'm usimg his Rom without my SD partitioned and its working fine.