I upgraded my pda with t mobile 4.01 beta rom then i was trying to get rid of it and upgrade to ATT latest rom. but it was not letting me to GET rid of it. SO i was trying many thing after doing them i saw that my pda`s phone feature is gone. then i installed RSU "PROGRAM B" SOURCEO2.com that is 4.0 something. I HAVE TRIED MANY THING BUT NO USE I HAVE ALSO DOWNGRADED TO WIN CD 2002
may be the att RSU will solve the problem. please tell me where to download it from.
the mobile was running on 900/1800
NOW THE PDA IS NOT DETECTING ANY SIGNALS.
AND I FEEL LIKE CRYING B/C IT WAS MY BROTHERS WHO GAVE IT TO ME FOR UPGRADING
Looks like you have the same Problem as i have. Check if your GSM-Module is still doing: You have to get into the Bootloader and check if it says "GSM OK" (then you are a lucky owner) or if it says "GSM Error" (then you´ve got the same problem as I´ve got). If it is the second case: Try this one: http://forum.xda-developers.com/viewtopic.php?t=1182&highlight=solved+gsm+error
Or this one: http://forum.xda-developers.com/viewtopic.php?t=4123&highlight=screen+1
But i need to say that these tips haven´t helped me out of this Prob. I hope it will help you!
So long...
no error any where GSM OK
NO HANGS every thing is fine.
Where can i down load ATT .20 RSU
I downloaded the rsu for ATT from yorch.net and now its getting signals.
I have upgraded to WM2003SE ROM, and upgraded Radio ROM to A20.10. My device is PH10A. But when I insert a sim card, these always no GSM, I could not dial any phone call.
Could anyone tell me that I should flash which Radio ROM to my device? Thanks
problem connecting to any network after radio upgrade
Hi,
I am having the same problem connecting to any cell network on my phone. It is a Qtek 1020 PW10A1 Rom version 4.02.04 ENG.
The problem started after updating the Radio stack software. The signal icon always shows up as no signal, this happens on all networks. I have another 1020 with the same Rom version but a different radio version A33.02 that is working. I have tried to search for this version to download or a solution for this problem for a few days now with no luck and was wondering if any one could help?
I have come across many other radio versions that say they are compatible with this model but each produce the same result, no signal.
Thanks in advance
(PS this is my first post!)
Hi Shadow,
I also have a 1020 with RSU 33.02 installed. If I knew how to extract the RSU then I could upload it here. It could do with being on the FTP. I didn't find anything on the Wiki about it, wondering if anyone has any suggestions?
Regards,
Neil.
I’m new to this so this may be wrong but I have found out that if I go into the wallaby boot loader and push the contacts button I get these options:
CE ROM TO SD
BOOT TO SD
GSM ROM TO SD
CE+GSM TO SD
Is the “GSM ROM TO SD” option the one that’s needed to be able to get the RSU extracted or is this something completely different?
When I select it, it tells me to connect the rs232 and run pc monitor – two things I don’t have.
Shadow1
Anyone found RSU 33.02 rom yet? or have any sugestions on how i could fix my phone :?:
Thanks
I posted this in the general forum but after some consideration felt it may get more views/help here so I apologise for the double posting ~ ~
Hi,I have an xda orbit (O2 uk) and I ran the USPL super CID on it which went thru fine. I then did an OS upgrade from the official O2 website to WM6. However my phone wouldnt make calls or accept calls. The signal bars were initially low which made me suspect the radio not being optimum. Tried to upgrade the radio from 3.06.90 to 3.08 or 3.19 but it kept on giving an error 270 - file corruption,tried flashing to another rom and still the same error.I then tried to re -USPL it and even that wont take... Can someone please help me out with this as I am at my wits end to a solution...
ok...update so far...repeated the flash over and over again, Hard reset and moved the enable and cert rapi to the xda and ran them there first after taking out the sd card. finally it took after a few more atempts. I then ran artemis 20273 rom which flashed easily....HOWEVER even though the signal bars are still up I cant call out or receive calls. Dialling out ,the call disconnects immediately even before it rings (like 0.5secs after i hit the send key). If I call the phone I get a message that calls are not currently being connected to that number! (i know the sim cards working as its my main number) Anyways run uspl again and flash radio to 3.18...goes thru easily but still no calls in and out. Is there anyone with an idea as to the problem or solution.
Hi everyone !
I'm new here (in the Hermes forums). I have a prophet, but now I bought a Hermes.
The guy who originally owned (the phone is used) told me that when he flashed it, he had this problem that I'm going to tell you now, so I really don't know what could had happened to him during the flashing process.
The problem I have is that the Hermes works very well, the Wifi, bluetooth, card reader, everything EXCEPT the PHONE, let's say, the GSM interface.
When I turn it on, everything works well, (I DON'T SEE THE 'NO GSM' THING), and I have the antenna icon with the exclamation mark (!) next to it. When I go into there, in the phone configuration, if I try to select a network manually, after a few seconds it says that it can't retrieve the list of networks, that I have to try later. If I go to the band configuration, and I put it to use only gsm, for example, after a few seconds it says that it can't change the configuration, that I have to try later.
I tryed with different sims, of different companies.
When I bought the phone, it had a spanish Schap's 3.54b, and the Olipro 2.30 spl.
I tryed hard resetting, but nothing. I flashed the original shipped rom WM6.1 WWE, downloaded from here, and nothing. NOTE: I had to flash with the sd method because if I try to do it with the computer, I have the 260 error (or 262 i dont remember).
I changed the HARDSPL to theOlipro 2.10, hard reseted again, and still de same thing.
The IPL is 1.04.
NOTE: When I flashed the WWE rom, I flashed the .nbf file inside, but the SPL.nbf I didn't flashed.
What can I do? ANY SUGGESTIONS ?
I read a lot of things in the forums and in the wiki, but nothing. I've just finished downloading the Schaps WM6 4.31, now i will try to flash it with the sd thing.
Also, I have the protocol 32.80.7020.20H. I've read it somewhere but I don't remember what the protocol is. I HAVEN'T CHANGED THIS since I bought it, could that be my problem?
Currently, I have this (before flashing Schaps):
-Device Information:
ROM: 3.54.255.3
ROM DATE: 07/05/07
Radio Version: 1.47.00.10
Protocol: 32.80.7020.20H
ExtROM: 3.54.255.104
-In the bootloader:
IPL-1.04
SPL-2.10.Olipro
Maybe the antenna is no good...
1st thing I'd try though is to flash a new radio on (use sd card method). Worst that can happen is "No GSM" but as you can't use it anyway theres no harm in trying...
Check what radio rom you have 1st though so you can flash back if need be.
If you can get a "broken" Hermes (same model is best) then you can replace parts and see if that helps. I did this and found one of the parts that was causing a problem with my jasjam was the flywheel.
Do a search for the HTC service manual or go to Mike Channons web site to get heaps of manuals and tutorials...
Cheers...
The phone is near new, let's say, it was used for less than a month, he had it a week or two and then flashed it and had that problem, so I don't think that it's and antenna problem, and if it hadn't antenna, it has some signal of some kind.
Any other ideas?
I changed the radio when i Flashed the WWE version. I'm now downloading this one http://forum.xda-developers.com/showthread.php?t=298520
Any suggestions? is there any problem using the AKU 3 or something?
Thanks =)
Hey,
What about the protocol version? can I change it? how? cause I flashed it and the radio changed but the protocol is the same.
I'll try to flash it with windows vista, to see if I can, because XP won't let my.. olnly SD flashing
Ok, I Installed a cingular flash, now I've protocol 32.67.7020.10H. Radio:1.34.00.10 and still having the same problem. I don't know what to do now... any suggestions? !
thanks
PD: also tryed putting a little piece of paper over the sim but it didn't changed anything
PD2: The error I get when I go to Phone Settings -> Netowrk, and I choose "Manual" is: "Unable to read setting from the netowrk. Try viewing settings later, or disconnect data connection and try again.
Now I know this is a novas question at best and its probable been covered already but I don’t know how to fix this. First I was experiencing what I believe to be radio issues, like I had a fully functional sim card in my Hermes but I was not receiving and service anywhere, only had this problem with the Hermes other phones where fine. I tried to do the wm6 rom update but I kept getting an error I think it was 262, so then I downloaded spl 2.10 in an effort to just update the radio, and as I went one to install radio rom 1.40 I kept e getting another error and now my Hermes has been stuck in the boot loader for 2 days, can someone please tell me how to get out of the boot loader and how to get my radio working again.