I have upgraded to WM2003SE ROM, and upgraded Radio ROM to A20.10. My device is PH10A. But when I insert a sim card, these always no GSM, I could not dial any phone call.
Could anyone tell me that I should flash which Radio ROM to my device? Thanks
problem connecting to any network after radio upgrade
Hi,
I am having the same problem connecting to any cell network on my phone. It is a Qtek 1020 PW10A1 Rom version 4.02.04 ENG.
The problem started after updating the Radio stack software. The signal icon always shows up as no signal, this happens on all networks. I have another 1020 with the same Rom version but a different radio version A33.02 that is working. I have tried to search for this version to download or a solution for this problem for a few days now with no luck and was wondering if any one could help?
I have come across many other radio versions that say they are compatible with this model but each produce the same result, no signal.
Thanks in advance
(PS this is my first post!)
Hi Shadow,
I also have a 1020 with RSU 33.02 installed. If I knew how to extract the RSU then I could upload it here. It could do with being on the FTP. I didn't find anything on the Wiki about it, wondering if anyone has any suggestions?
Regards,
Neil.
I’m new to this so this may be wrong but I have found out that if I go into the wallaby boot loader and push the contacts button I get these options:
CE ROM TO SD
BOOT TO SD
GSM ROM TO SD
CE+GSM TO SD
Is the “GSM ROM TO SD” option the one that’s needed to be able to get the RSU extracted or is this something completely different?
When I select it, it tells me to connect the rs232 and run pc monitor – two things I don’t have.
Shadow1
Anyone found RSU 33.02 rom yet? or have any sugestions on how i could fix my phone :?:
Thanks
Related
I upgraded my PPC from 2002 to 2003 successfully, but when I tried to upgrade radio, it was failed. I read a lot of article on the forum, and followed the instruction of 'How to fix GSM Error Problem', but still not improved. The RSU stopped at 1%, and then I placed my device in the cradle and run Active Sync, my PPC was not connected with computer, and cannot upgrade in background. I donot know why, please do help me, thanks a lot in advance.
In addition, on the back sticker of my PPC, it showed PW10B1. And I setup special_rom_1.1 to my PPC, at the decice information, it showed my model is PW10A1. So the different RSU should be used in the two model. I would like to ask which version of RSU I need to implement. Thank you.
It´s always the rearsticker you have to look at. So you require a 6.XX Radiostack
Stefan
hiya Stefan, I read a lot of article from you at this forum. Thank you for your reply.
I have tried setup several versions of ROM, such as special_rom_1.1, O2 rom, T-mobile rom, and Dopoda rom, and I also tried to setup various versions of RSU, such as 6.24, 4.21, and A.33, ect. But none of them can work on my device, I mean the ROM can be copied from SD card to my device successfully, but when I try to setup RSU files, every time it stoped at 1%, and I click to re-start the system, and then it stop at 1% once again. I have read 'How to fix GSM Error Problem ....' from wiki, but every time it stoped at 1%.
When I setup the O2 and special_rom_1.1 ROM to my device, it showed PW10A1 at the device information. But when I setup T-mobile 2003 ROM, it showed PW10B1 at the device information. On the back sticker of my device, it shows PW10B1.
My question are:
1, Which version of ROM I need to setup from SD card?
2, Which RSU I need to setup then?
3, How can I solve the problem that is failure at 1%?
Thank you in advance.
I am wondering if some one can help me to solve my problem. Thank you all.
Hi.
Well this is the problem. I have a sx66 and no mather wath radio version i flash., no mather how many times i run the xdadev_all_unlock-v1.6 and xdadev_all_unlock-v1.5 it stills locked.
When i run the xdadev_all_unlock-v1.6 is shows that the cellphone is unlocked but when i place my sim card it stills say “invalid sim card”, i tried with ten sim in while running the program and with the sim out as well and its the same.
I repeat the unlocking process with all radio versions from R_1.06.02 to Radio_1.15 type I and II, and again “invalid sim card”.
Oh yea and i read all the wiki and all the threads, maybe i lost something.
Can someone help me please???
Thts the end of the line my friend..i too had a similar problem with my Hima..unfortunately i had to replace it
Have you tried flashing back to WM2003?
Upgrade the Radio to 1.15
then upgrade to WM5/6
Regards
David
I had a similar (not the same though) problem in the past: what I suggest is that you go back to WM2003 (you'll hopefully find out that your fone is unlocked), then upgrade your radio to 1.15 and you can upgrade to WM5/6/6.1 (as you wish)...
Hope this helps
Hi everyone !
I'm new here (in the Hermes forums). I have a prophet, but now I bought a Hermes.
The guy who originally owned (the phone is used) told me that when he flashed it, he had this problem that I'm going to tell you now, so I really don't know what could had happened to him during the flashing process.
The problem I have is that the Hermes works very well, the Wifi, bluetooth, card reader, everything EXCEPT the PHONE, let's say, the GSM interface.
When I turn it on, everything works well, (I DON'T SEE THE 'NO GSM' THING), and I have the antenna icon with the exclamation mark (!) next to it. When I go into there, in the phone configuration, if I try to select a network manually, after a few seconds it says that it can't retrieve the list of networks, that I have to try later. If I go to the band configuration, and I put it to use only gsm, for example, after a few seconds it says that it can't change the configuration, that I have to try later.
I tryed with different sims, of different companies.
When I bought the phone, it had a spanish Schap's 3.54b, and the Olipro 2.30 spl.
I tryed hard resetting, but nothing. I flashed the original shipped rom WM6.1 WWE, downloaded from here, and nothing. NOTE: I had to flash with the sd method because if I try to do it with the computer, I have the 260 error (or 262 i dont remember).
I changed the HARDSPL to theOlipro 2.10, hard reseted again, and still de same thing.
The IPL is 1.04.
NOTE: When I flashed the WWE rom, I flashed the .nbf file inside, but the SPL.nbf I didn't flashed.
What can I do? ANY SUGGESTIONS ?
I read a lot of things in the forums and in the wiki, but nothing. I've just finished downloading the Schaps WM6 4.31, now i will try to flash it with the sd thing.
Also, I have the protocol 32.80.7020.20H. I've read it somewhere but I don't remember what the protocol is. I HAVEN'T CHANGED THIS since I bought it, could that be my problem?
Currently, I have this (before flashing Schaps):
-Device Information:
ROM: 3.54.255.3
ROM DATE: 07/05/07
Radio Version: 1.47.00.10
Protocol: 32.80.7020.20H
ExtROM: 3.54.255.104
-In the bootloader:
IPL-1.04
SPL-2.10.Olipro
Maybe the antenna is no good...
1st thing I'd try though is to flash a new radio on (use sd card method). Worst that can happen is "No GSM" but as you can't use it anyway theres no harm in trying...
Check what radio rom you have 1st though so you can flash back if need be.
If you can get a "broken" Hermes (same model is best) then you can replace parts and see if that helps. I did this and found one of the parts that was causing a problem with my jasjam was the flywheel.
Do a search for the HTC service manual or go to Mike Channons web site to get heaps of manuals and tutorials...
Cheers...
The phone is near new, let's say, it was used for less than a month, he had it a week or two and then flashed it and had that problem, so I don't think that it's and antenna problem, and if it hadn't antenna, it has some signal of some kind.
Any other ideas?
I changed the radio when i Flashed the WWE version. I'm now downloading this one http://forum.xda-developers.com/showthread.php?t=298520
Any suggestions? is there any problem using the AKU 3 or something?
Thanks =)
Hey,
What about the protocol version? can I change it? how? cause I flashed it and the radio changed but the protocol is the same.
I'll try to flash it with windows vista, to see if I can, because XP won't let my.. olnly SD flashing
Ok, I Installed a cingular flash, now I've protocol 32.67.7020.10H. Radio:1.34.00.10 and still having the same problem. I don't know what to do now... any suggestions? !
thanks
PD: also tryed putting a little piece of paper over the sim but it didn't changed anything
PD2: The error I get when I go to Phone Settings -> Netowrk, and I choose "Manual" is: "Unable to read setting from the netowrk. Try viewing settings later, or disconnect data connection and try again.
I have Qtek 2020 with Rom CE Version 1.72WWE, but every time i try to upgrade to new roms:
(Previously Sundream's WM 6.5 WWE) and (Currently Syed Ather's WM 6.0)
Its giving me issues related to my network.
Signals are fluctuating, i cant make calls, neither recieve them, get messages in delay time more often, It avoids making me save contacts in sim card but after several attempts it succeeds.
Please Help me out. I am not getting this issue when i downgrade back to my Official Qtek 2020 1.72 Rom.
That is strange. Can you tell me, when you take your battery out, what is displayed on the sticker underneath? PH10a? PH10b?
Also, do you happen to know what Radio you are using? (The radio is seperate to the ROM).
Furthermore, and only if you remember, when you put your device into upgrade mode just before you flash a new ROM, what boot number does it say (IE Mine says V1.04 from memory).
Thanks for Reply
Jadel said:
That is strange. Can you tell me, when you take your battery out, what is displayed on the sticker underneath? PH10a? PH10b?
Also, do you happen to know what Radio you are using? (The radio is seperate to the ROM).
Furthermore, and only if you remember, when you put your device into upgrade mode just before you flash a new ROM, what boot number does it say (IE Mine says V1.04 from memory).
Click to expand...
Click to collapse
Yeah let me tell you all the necessary Information
Official Qtek 2020 Rom Version: 1.72.00
Official Qtek 2020 Radio Version: 1.14.00
Upgraded to:
Syed Ather's WM 6.0 Profession (Currently)
Radio Version: 1.17.00
-------------------------------------
It is : PH10B
Bootloader Version : V1.04
My Network Details
Network Name: Ufone
Network Country: Pakistan (ASIA)
Details of How I Flashed My Roms
I went to Boot Loader First: (DPad+Power+Reset) (V1.04)
Attached it to my Laptop through its Cradle (Windows XP Used)
Serial changed to USB
Loaded HimaupgradeUT_NoID.exe file (dont remember exact Name)
and Upgrade the roms + Radio Later
Got Congratulation Screens
Hard Reset By (Camera+Record Button+Reset)
Using the NO,YES,YES things and Pressing DPAD
Important Thing to tell you
1-I didnt take out my Storage Card not even SIM Card of My Network Provider when Flashing both times the different roms.
Please Any one here to help me out
Hello All,
I upgraded my EXEC to WM6 with the ROM of lucathebig. I did not upgrade the radio rom.
I don't know how it happened but, every time I switch it on, even without the sim card in, I can't access the phone settings! Or even the dialpad for that matter.
When I click on the signal icon, the balloon comes on but says "The phone is off"
When I tap settings nothing happens.
Please note that it was working a couple of days ago. I reset it to factory defaults but nothing happened.
Has anyone else got any suggestions? I will try to avoid flashing the ROM again and I'll keep it as the last option.
Update:
I noticed that there's no Radio version or IMEI on the system information on my phone so I figured that the radio got corrupted or something like that.
I tried to flash the Radio but i get the 114 error from the upgrade tool.
I tried all sorts of different upgrade tools with different radio version but none of it worked...
I am now downloading the official O2 update Xda_Exec_Upgrade_v113188.exe and try to install this instead to see if it fixes the Radio.
Has anyone found a solution for the 114 error? I have read tens of posts but can't seem to fins anything that helps. The people who solve it, use different versions of the update tools or they remove the USB hubs or try the upgrade 3 times.
Help ..?
I tried O2 update but the upgrade executable gave me a country ID error.
So I took the WM ROM and the Radio Rom from the zip file and tried to upgrade both but on the the WM ROM was updated. The Radio rom still gives me an error when I try to Flash...
Ohhhh this is so dissapointing.....