I upgraded my PPC from 2002 to 2003 successfully, but when I tried to upgrade radio, it was failed. I read a lot of article on the forum, and followed the instruction of 'How to fix GSM Error Problem', but still not improved. The RSU stopped at 1%, and then I placed my device in the cradle and run Active Sync, my PPC was not connected with computer, and cannot upgrade in background. I donot know why, please do help me, thanks a lot in advance.
In addition, on the back sticker of my PPC, it showed PW10B1. And I setup special_rom_1.1 to my PPC, at the decice information, it showed my model is PW10A1. So the different RSU should be used in the two model. I would like to ask which version of RSU I need to implement. Thank you.
It´s always the rearsticker you have to look at. So you require a 6.XX Radiostack
Stefan
hiya Stefan, I read a lot of article from you at this forum. Thank you for your reply.
I have tried setup several versions of ROM, such as special_rom_1.1, O2 rom, T-mobile rom, and Dopoda rom, and I also tried to setup various versions of RSU, such as 6.24, 4.21, and A.33, ect. But none of them can work on my device, I mean the ROM can be copied from SD card to my device successfully, but when I try to setup RSU files, every time it stoped at 1%, and I click to re-start the system, and then it stop at 1% once again. I have read 'How to fix GSM Error Problem ....' from wiki, but every time it stoped at 1%.
When I setup the O2 and special_rom_1.1 ROM to my device, it showed PW10A1 at the device information. But when I setup T-mobile 2003 ROM, it showed PW10B1 at the device information. On the back sticker of my device, it shows PW10B1.
My question are:
1, Which version of ROM I need to setup from SD card?
2, Which RSU I need to setup then?
3, How can I solve the problem that is failure at 1%?
Thank you in advance.
I am wondering if some one can help me to solve my problem. Thank you all.
Related
Major problem with O2 upgrade. Can anyone help with recovering my O2 XDA.
I downloaded the OS and Radio Stack files from the O2 website (And read the instructions first)
Radio_Unit_Upgrade_v31703.exe
Radio_Stack_Upgrade_v421.zip
The Radio_Unit_Upgrade_v31703 went like a dream, no prob what so ever.
Once i had completed that, reset up the active sync connection i decided on the Radio Stack update - !! Disaster !!
After the reboot all i get on the screen are lines jumping about.
No number of soft or cold boots will bring it back to life.
The device is still recognised by active sync.
I have tried rerunning the Radio_Unit_Upgrade_v31703. This seems to work without hitch from the PC end. Only that the required cold boot of the XDA returns the same jumpy liney screen.
I did take an SD backup of the system before any changes were made.
Can some kind soul please help me dig myself and my only recently aquired XDA toy back out from this hole.
The model is an PW10A1
Did the radio stack upgrade complete? What happens when you try to flash the radio stack 4.21 again? Have you removed the sim card? Corrupt radio stacks are often a non reversable problem, if the xda is under warranty you might get a replacement from O2, after all it was their program that knackered the device.
Try this: Remove sim, Fully charge battery, soft reset, connect to activesync, run upgrade for radio stack again, follow instructions from there.
I have upgraded to WM2003SE ROM, and upgraded Radio ROM to A20.10. My device is PH10A. But when I insert a sim card, these always no GSM, I could not dial any phone call.
Could anyone tell me that I should flash which Radio ROM to my device? Thanks
problem connecting to any network after radio upgrade
Hi,
I am having the same problem connecting to any cell network on my phone. It is a Qtek 1020 PW10A1 Rom version 4.02.04 ENG.
The problem started after updating the Radio stack software. The signal icon always shows up as no signal, this happens on all networks. I have another 1020 with the same Rom version but a different radio version A33.02 that is working. I have tried to search for this version to download or a solution for this problem for a few days now with no luck and was wondering if any one could help?
I have come across many other radio versions that say they are compatible with this model but each produce the same result, no signal.
Thanks in advance
(PS this is my first post!)
Hi Shadow,
I also have a 1020 with RSU 33.02 installed. If I knew how to extract the RSU then I could upload it here. It could do with being on the FTP. I didn't find anything on the Wiki about it, wondering if anyone has any suggestions?
Regards,
Neil.
I’m new to this so this may be wrong but I have found out that if I go into the wallaby boot loader and push the contacts button I get these options:
CE ROM TO SD
BOOT TO SD
GSM ROM TO SD
CE+GSM TO SD
Is the “GSM ROM TO SD” option the one that’s needed to be able to get the RSU extracted or is this something completely different?
When I select it, it tells me to connect the rs232 and run pc monitor – two things I don’t have.
Shadow1
Anyone found RSU 33.02 rom yet? or have any sugestions on how i could fix my phone :?:
Thanks
I own a universal o2 xda exec purchased from uk. It has been working greatly for about 8 month (on another SIM provider) without any troubles.
Suddenly it receives no signal, the phone doesn't seem to see the SIM, I can't enen access the phone settings.
After performing a soft reset I checked the device information and found that radio version & protocol version are BLANCK noyhing is written, also the IMEI number doesn't exist, nothing is written.
I tried to install a new ROM but it didn't work, I got an error message about my ROM image that is not compatible with my country code!!!!!!
I've been advised to reinstall the WM5????
Please advise.
Sorry to hear that was it an eaby or simialr purchase?
if it is dodgy or needs rom/imei etc,tbh mate your on tricky ground sadly
as its hard to get help and people may assume its stolen etc ,even tho it seesm your the victim here
i hope im wrong and someone can highlight an easy remedy
maybe the radio stack has just encountered an issue
no it was purchased directly from uk.
and it was working just fine so why now?
no way to format & reinstall the original ROM?
tbh i dont know,but youll be hard pressed to find anywere to help without a imei,thats what i mean
Even tho it's not yourfault i think ,if you start messing with the imei ,its a poss jail term
so maybe people wont rush to aid you,hopefully someone with more expertise may be able to offer help
i just mentioned that due to the fact it may be why limited response to the post
i hope there is a simple and easy fix for you
elsaghirmo said:
I own a universal o2 xda exec purchased from uk. It has been working greatly for about 8 month (on another SIM provider) without any troubles.
Suddenly it receives no signal, the phone doesn't seem to see the SIM, I can't enen access the phone settings.
After performing a soft reset I checked the device information and found that radio version & protocol version are BLANCK noyhing is written, also the IMEI number doesn't exist, nothing is written.
I tried to install a new ROM but it didn't work, I got an error message about my ROM image that is not compatible with my country code!!!!!!
I've been advised to reinstall the WM5????
Please advise.
Click to expand...
Click to collapse
did u try hard resetting the phone? try installing the rom with a RUU with no_ID
have a look on this page, this may give you additional info;
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Can you briefly describe how you did the ROM reinstallation (names of the files you opened, source, etc.)? You shouldn't be seeing the country code error message with the NO_ID installer.
have a look on this link;
http://wiki.xda-developers.com/index.php?pagename=Instructions for those with Country Code error
You mentioned something about a problem with the radio stack. I tryed to install a No_ID rom and the system stopped at the radio stack update step.
So is it a hardware that has to be changed or exactly what?
and what has the radio stack to do with the IMEI no not appearing.
Sorry for disturbance but I 'm seeking any help
Hi.
Well this is the problem. I have a sx66 and no mather wath radio version i flash., no mather how many times i run the xdadev_all_unlock-v1.6 and xdadev_all_unlock-v1.5 it stills locked.
When i run the xdadev_all_unlock-v1.6 is shows that the cellphone is unlocked but when i place my sim card it stills say “invalid sim card”, i tried with ten sim in while running the program and with the sim out as well and its the same.
I repeat the unlocking process with all radio versions from R_1.06.02 to Radio_1.15 type I and II, and again “invalid sim card”.
Oh yea and i read all the wiki and all the threads, maybe i lost something.
Can someone help me please???
Thts the end of the line my friend..i too had a similar problem with my Hima..unfortunately i had to replace it
Have you tried flashing back to WM2003?
Upgrade the Radio to 1.15
then upgrade to WM5/6
Regards
David
I had a similar (not the same though) problem in the past: what I suggest is that you go back to WM2003 (you'll hopefully find out that your fone is unlocked), then upgrade your radio to 1.15 and you can upgrade to WM5/6/6.1 (as you wish)...
Hope this helps
Hi everyone !
I'm new here (in the Hermes forums). I have a prophet, but now I bought a Hermes.
The guy who originally owned (the phone is used) told me that when he flashed it, he had this problem that I'm going to tell you now, so I really don't know what could had happened to him during the flashing process.
The problem I have is that the Hermes works very well, the Wifi, bluetooth, card reader, everything EXCEPT the PHONE, let's say, the GSM interface.
When I turn it on, everything works well, (I DON'T SEE THE 'NO GSM' THING), and I have the antenna icon with the exclamation mark (!) next to it. When I go into there, in the phone configuration, if I try to select a network manually, after a few seconds it says that it can't retrieve the list of networks, that I have to try later. If I go to the band configuration, and I put it to use only gsm, for example, after a few seconds it says that it can't change the configuration, that I have to try later.
I tryed with different sims, of different companies.
When I bought the phone, it had a spanish Schap's 3.54b, and the Olipro 2.30 spl.
I tryed hard resetting, but nothing. I flashed the original shipped rom WM6.1 WWE, downloaded from here, and nothing. NOTE: I had to flash with the sd method because if I try to do it with the computer, I have the 260 error (or 262 i dont remember).
I changed the HARDSPL to theOlipro 2.10, hard reseted again, and still de same thing.
The IPL is 1.04.
NOTE: When I flashed the WWE rom, I flashed the .nbf file inside, but the SPL.nbf I didn't flashed.
What can I do? ANY SUGGESTIONS ?
I read a lot of things in the forums and in the wiki, but nothing. I've just finished downloading the Schaps WM6 4.31, now i will try to flash it with the sd thing.
Also, I have the protocol 32.80.7020.20H. I've read it somewhere but I don't remember what the protocol is. I HAVEN'T CHANGED THIS since I bought it, could that be my problem?
Currently, I have this (before flashing Schaps):
-Device Information:
ROM: 3.54.255.3
ROM DATE: 07/05/07
Radio Version: 1.47.00.10
Protocol: 32.80.7020.20H
ExtROM: 3.54.255.104
-In the bootloader:
IPL-1.04
SPL-2.10.Olipro
Maybe the antenna is no good...
1st thing I'd try though is to flash a new radio on (use sd card method). Worst that can happen is "No GSM" but as you can't use it anyway theres no harm in trying...
Check what radio rom you have 1st though so you can flash back if need be.
If you can get a "broken" Hermes (same model is best) then you can replace parts and see if that helps. I did this and found one of the parts that was causing a problem with my jasjam was the flywheel.
Do a search for the HTC service manual or go to Mike Channons web site to get heaps of manuals and tutorials...
Cheers...
The phone is near new, let's say, it was used for less than a month, he had it a week or two and then flashed it and had that problem, so I don't think that it's and antenna problem, and if it hadn't antenna, it has some signal of some kind.
Any other ideas?
I changed the radio when i Flashed the WWE version. I'm now downloading this one http://forum.xda-developers.com/showthread.php?t=298520
Any suggestions? is there any problem using the AKU 3 or something?
Thanks =)
Hey,
What about the protocol version? can I change it? how? cause I flashed it and the radio changed but the protocol is the same.
I'll try to flash it with windows vista, to see if I can, because XP won't let my.. olnly SD flashing
Ok, I Installed a cingular flash, now I've protocol 32.67.7020.10H. Radio:1.34.00.10 and still having the same problem. I don't know what to do now... any suggestions? !
thanks
PD: also tryed putting a little piece of paper over the sim but it didn't changed anything
PD2: The error I get when I go to Phone Settings -> Netowrk, and I choose "Manual" is: "Unable to read setting from the netowrk. Try viewing settings later, or disconnect data connection and try again.