I have just upgraded to the new official WM 6.1 ROM, and have noticed that before, when I would type a new text message and begin typing in the name of one of my contacts in the "To:" box, their name and number would come up so i could just choose it without having to type out their full name. Now I can not do that anymore, I am not sure if it is after installing the touch (original not diamond) keyboard because i never tried text messaging before installing it. Is there a way to get this feature back, because it is much easier than having to click menu add recipient.
Also, for the touch keyboard, is there a way to choose the full qwerty keyboard always, because whenever i try to make a new text message, I can only get the phone pad like keyboard (three letters per block) or the qwerty with two letters per block, is there a way to always get the full qwerty?
killerkhatiby009 said:
I have just upgraded to the new official WM 6.1 ROM, and have noticed that before, when I would type a new text message and begin typing in the name of one of my contacts in the "To:" box, their name and number would come up so i could just choose it without having to type out their full name. Now I can not do that anymore, I am not sure if it is after installing the touch (original not diamond) keyboard because i never tried text messaging before installing it. Is there a way to get this feature back, because it is much easier than having to click menu add recipient.
Also, for the touch keyboard, is there a way to choose the full qwerty keyboard always, because whenever i try to make a new text message, I can only get the phone pad like keyboard (three letters per block) or the qwerty with two letters per block, is there a way to always get the full qwerty?
Click to expand...
Click to collapse
It has been my experience that this is due to the Touch Keyboard. I had that same problem, along with characters not typing correctly when I used the hardware keyboard, that made me un-install it from my Sprint Mogul.
Also, it is a known problem with the Touch Keyboard that it will not let you select the full QWERTY keyboard. I know there is a fix for it by using an altered Touch Keyboard, but when I tried the altered one it also had the same problems as the original, so I un-installed that one as well. My advice to you would be to un-install the Touch Keyboard and use something else like PCM Keyboard, that is the one I use most.
Another thing, it might take quite a long time for the Touch Keyboard to un-install. I know I had to leave my phone sit for about 10-15 minutes with the wait cursor spinning around in the Remove Programs setting before it finally was deleted.
I hope this helps!
its not a keyboard problem thats how 6.1 is my phone does the same thing regardless of what keyboard im using
it seems to be a problem with the touch keypad, as after uninstalling it, I am able to select my contacts for a text message as soon as I begin typing their name. Thanks for the help.
Related
I installed the Touch Keyboard-Keypad and now when I slide out the full keyboard, it is still using t9. I changed the keyboard on the bottom of the screen to "keyboard" but it still says t9 at the top of the screen and my full keyboard doesn't function correctly. I'm sure there is something dumb that I am missing, anyone out there have the same problem, or a solution perhaps? Thanks!
you know what i think there are different versions of this software ill see if i can get you a copy of the one i use on my titan. send me a pm to remind me. im not near a pc now.
Hey elgreek84, I'm having the same problem along with being unable to pull from the contact list when manually adding a To: recipient. Be nice to have this working as I really like the Touch Keyboard-Keypad.
i just installed the Touch keyboard-keypad today and when i slide out my keyboard it still says xt9 or whatever at the top but i don't seem to have any problems. i guess i got the "later" version.
one thing that's annoying to me is when i pull up the Touch keyboard i can't see what i'm typing. i use Threaded SMS and when i hit New i can see what i'm typing, but if i'm just responding to a txt i can't see if what i'm typing is messing up or if it's right.
Heres the one elgreek84 hooked me up with. I haven't had a chance to test it, but he says you shouldn't have the t9 problem with it. Good luck.
thanks guys..this is what i needed...awesome...
I can't seem to get this to run (it installs) on my XV6800.
always qwerty
ok that's great but I'd like to have the qwerty keyboard all the time, because in certain apps shows the qw er... and in others the full keyboard!! Any ideas???
This is working for me, but it seems that with it enabled, it seems to disable AutoCorrect/Suggestive text... Autocorrect is checked in input options, but it just doesn't work...
In general, I wouldn't mind since the xT9 is fairly intuitive, but when I'm typing with the slide-out, I rely on it to correct the words i frequently mess up, and moreso for conjunctions (dont=don't, etc). It's too much effort to actually hit the apostrophe. So - is there any way to make xT9 NOT active when the slide is out? Or even to disable xT9 all together? I have unchecked all the boxes in the xT9 options, but it still shows xT9 at the top, and autocorrect is still broken.
I have the 16 key touch dual.
So on input options, you have the touch keypad, when I select that sometimes this comes out (please see attached)
I like it thought better than the 20 key touch keyboard.
Yeh... Where?
I second this, it works really well but there is no option to bring it up on the dual... it just randomly appears sometimes when you need to input text.
Thirded.
And whats more, why does text input seem to vary on web pages?
I've got some where it defaults to numeric input when it should be alpha numeric (ie. passwords), others where XT9 seems to be off (the subject on mails in facebook).
Its so stupidly all over the place and inconsistent! If I could just get this one to pop up all the time I'd be happy.
Doesn't that keyboard show when there's no text entry field?
And yes, i want it too, why would they disable it for normal usage?
Yeh I have found the keyboard to be all over the place when it comes to deciding if it will give you tx9, abc, 123, etc.... Anyone know a way to set one of the two alphanumerics as a default at least?
ok ive had this appear a few times now but couldnt figure out why, as you have been asking for it i have been playing around and think i know what is causing it. you may not need everything listed below but these are the settings on my device if you play around with them you should be able to narrow it down.
I'm running Toms rom, found here
i have disabled threaded sms by using the second setting here
i have enabled the favourite people button on the htc home screen by deleteing the key here
the only other app i have that may have changed a setting is the HTC home customiser.
After making these changes tick the enable xt9 setting in romsettings app, exit the app, then go back into it and untick the enable t9 setting, after closing romsettings you should have the keyboard shown in the second screen shot
as far as i can see this changes the keyboard in all applications
Thats great! Still albeit of a noob so you lost me somewhere there, is there a way to this on the stock ROM?
short answer is i dont know. try looking for an applcation called rom settings after installing it there is a t9 setting. untick it and closethe application if this makes no dfference you may want to try altering the other settings and then trying again until it works.
kerrance76 said:
short answer is i dont know. try looking for an applcation called rom settings after installing it there is a t9 setting. untick it and closethe application if this makes no dfference you may want to try altering the other settings and then trying again until it works.
Click to expand...
Click to collapse
Ok will try that thanks. On the side, when you untick "T9" does this make "abc" default text entry as well?
I have confirmed that this keyboard layout come out when no text entry is needed.
muzikfreakah said:
On the side, when you untick "T9" does this make "abc" default text entry as well?
Click to expand...
Click to collapse
I wish, this has been a problem since the phones release - theres 7 pages on it here
muzikfreakah said:
I have confirmed that this keyboard layout come out when no text entry is needed.
Click to expand...
Click to collapse
thats the default action anyway, with the changes detailed the keyboard is available when entering text, if you look at the second image you will see that the cursor is actually in the message box, its the black line at the end of the word hello
muzikfreakah said:
I have confirmed that this keyboard layout come out when no text entry is needed.
Click to expand...
Click to collapse
Eh? Maybe I overdosed on the thick pills last night, but that doesn't make any sense? If I click on a password field in IE, sometimes the main phone keypad always seems to default to numeric entry. But clicking in the field itself pops up this lovely keyboard.
It really does make no sense at all. There doesn't appear to be any standard/global keyboard settings.
And this is in v6 of WinMo, you would have thought they would have got the basics right by now, but the darned sent items has the useless option of "order by from" - when all the sent items are sent from the same person.
Its got plenty of potential, but it just seems like lots of separate teams were implementing it, doing their own thing without any centralised discussion/design.
Has anyone managed to get this to work with the standard T-Mobile [UK] ROM ?
any updates on this as well? it would be nice to just get an option for this
I got it to work, rather by chance, but thing is after that, I could switch to back to the touchpad type anymore.
I installed POCKETCM KEYBOARD. After doing that, somehow it locked this keyboard in when I choose touchpad.
Its rather a workaround, but for those who to use it premanently, you can do it
it also shows up at times when you are entering a password
Ouch ! I read to quickly and did'nt see the word "permanently" !
It does the same for me after installing pocketpc keyboard and even after uninstalling it !!!
Did you find a way to get the classic keyboard back ? This one is nice but there are some important keys missing as "." and a key to hide the keyboard !
Thanks
EDIT : The installation of Resco Keyboard got all the original settings back + Resco Keyboard of course.
So if you need to use the famous "hidden HTC keyboard", simply install Resco Keyboard and then Pocketpc keyboard.
You will then have your classic "touch" keyboards replaced by the "hidden keyboard" (+Resco Keyboard installed of course).
But to my mind, Resco keyboard alone is better...
I have a question for those of you (if any) who are using the letter recognizer, the block recognizer, or the original Windows Mobile keyboard as your input method on the Touch HD: Do you get word completion pop-ups?
I'm a long-time WM user (the Touch HD is my fifth WM device) and the letter recognizer is my preferred method of input and one of the reasons I like it is the convenience of not having to type entire long words most of the time, with the ability to simply pick from the completion suggestions pop-up instead. However, I get no completion pop-up on the Touch HD when I use the letter recognizer. The same is true for the block recognizer and the WM keyboard as well. Am I alone in experiencing this? Am I alone in being annoyed by this? What gives?...
I use the Letter Recognizer and find it faster than any of the keyboard. Make sure you enable T9 in the default keyboard and word completion will be available. I thought I lost it too when I accidentally disabled T9.
Thanks for your response. This tells me that something might be wrong on my device, because I get no word completion pop-ups even when I do that.
Here are all of my current settings related to this:
On the Full QWERTY keyboard, the "ABC <-> T9" slider is set to T9.
On the Compact QWERTY keyboard, the "ABC <-> T9" slider is set to T9.
Under "Touch Input Settings", "Word Completion in T9 mode" is selected, "Word Completion in ABC mode" is selected, "Auto-Substitution" is deselected, "Spell Correction" is deselected.
Under the input "Options" (the original WM input options), on the "Word Completion" tab, "Suggest words when entering text" is selected. (The "Suggest after entering" setting is "2 letters", the "Suggest" setting is "4 words", and "Add a space after word" is deselected.) And "Enable Auto Correct" is deselected.
Still no word completion suggestion pop-ups...
I have no idea what could be wrong!
If there's anyone out there with additional insight into this, your feedback would be appreciated. You might be my only hope.
It's odd, I set mine to the "phone keypad" and now it wont go back to any of the others, I've tried them all, selected them, go back in and *poof* it's gone back to a standard phone layout. Turning it on and off failed to fix this so I'm presuming I'm going to have to reset
I have the same problem here too.
What keyboards do you have installed? I have the SPB Keyboard, reckon that might affect things??
All my settings are the same as above...and HD Tweak says T9 and word completion are on. T9 and word completion wwork fine on the keyboards but not the letter/block recogniser.
I don't have any third party keyboard installed (if I don't count the HTC stuff that came with the phone). I do have a bunch of other software installed, on the other hand. But, I don't think any of those have anything to do with input methods (although, it's hard to discount "unintended consequences"...).
I must add that suggestions don't work for me on the Windows Mobile default keyboard either. (I'm not sure if you implied that it works on yours.)
So, my exact situation is as follows:
HTC Full QWERTY keyboard:
Suggestions displayed horizontally listed (i.e., HTC-proprietary)
HTC Compact QWERTY keyboard:
Suggestions displayed horizontally listed (i.e., HTC-proprietary)
HTC Phone keypad:
Suggestions (surprisingly) displayed horizontally listed (i.e., HTC-proprietary)
Windows default keyboard:
No suggestions
Letter recognizer:
No suggestions
Block recognizer:
No suggestions
Suggestions aren't applicable to the Transcriber, naturally.
Perhaps I should have tried this much sooner, but it just occurred to me to try a wider Google search on this topic, and I came across another thread on this site that seems like it might contain the solution(s):
http://forum.xda-developers.com/showthread.php?t=441656&highlight=word+completion
I'm at work right now, so I can't try it right away, but I'll surely do it as soon as I get home. If anyone else with this problem is willing to try that before me, please let us know about the result.
gadgetuk437 said:
I have the same problem here too.
What keyboards do you have installed? I have the SPB Keyboard, reckon that might affect things??
All my settings are the same as above...and HD Tweak says T9 and word completion are on. T9 and word completion wwork fine on the keyboards but not the letter/block recogniser.
Click to expand...
Click to collapse
I use the phone keypad on mine and it was fine up until yesterday.
The only thing it gives now is numbers! every other method of text input appears to be ok
Strange, I have had no issues with word complete as long as T9 is selected in the default HTC Full QWERTY keyboard or any of the HTC keyboard. Had this issue with my Omnia in the past where if T9 is activated, the Word Complete pop-up won't work and I had to do a registry tweak to enable word complete, after which T9 is disabled in the other keyboards.
One questoin from a newbie -
i have a problem that I can not menege to use Letter Recognizer.
In settings for inpust I select Letter Recognizer. And confirm.
But always I get keybord. If I open settings again the Full Querty is chosen.
thanx
sorry - I've read the f... manual
I was to lazy
xmaspast said:
I use the phone keypad on mine and it was fine up until yesterday.
The only thing it gives now is numbers! every other method of text input appears to be ok
Click to expand...
Click to collapse
I had a similar problem on my rom (German) after setting T9 to enabled in HD Tweak. Setting T9 in the keyboard settings is fine but you might wanna try to deactivate it in HD Tweak if you enabled it there before.
should it only work when T9 is on ? Or should it also be on when you use ABC?
Cause I would like to have it on when I enabled ABC
I use the letter recogniser about 50% of the time.. I find it slightly quicker than the keyboard on WM.. However as a long time user of UIQ... SE P800/900/990/1 I wish there was something similar to the letter recogniser available on those?? Any one know? It was so logical.. Use the lower half of the screen for letters, top for numbers, and straddle the middle for capitals.. Not like WM where you are restricted to a small box at the bottom.
anyone know if you can get this for WM6.1?
Well, I'm happy to report that the solution explained in the post at the following URL has done what I was trying to achieve (post #8 on that thread):
http://forum.xda-developers.com/showpost.php?p=2630663&postcount=8
This brings back the word completion pop-up lists on the standard Windows Mobile input methods. It does eliminate the HTC word completion on the HTC input methods, though (including T9, which makes the Compact QWERTY useless for typing words). But, if you're not interested in those input methods and all you want is to be able to use the Letter Recognizer, Block Recognizer, or WM keyboard with word completion, this may be your solution. (Naturally, try it at your own risk...)
memko123 said:
sorry - I've read the f... manual
I was to lazy
Click to expand...
Click to collapse
How exactly did you get the Letter Recogniser to work? I used to have it in the OEM ROM but my Enable_recognisers.cab doesn't seem to work on Dutty's 2.1 xtreme ROM.... or is it me??
When I want to use the keyboard and have the Full QUERTY keyboard selected, it's in numeric mode. When I tap ABC to get to the alfanumeric mode nothing happens. What is the solution?
Axum
Did you try tapping on the right side of the keyboard button so you can choose which keyboard you want to use?
Right hand side there is a abc button, is it not there?
yes, I tried that, both full or compact QWERTY is not working when I select them and then tap ABC. When I select the standard Windows Mobile keyboard, then I get a Qwerty keyboard that I can use.
I had this problem earlier on the same phone (but I did a hard reset then) and now the problem is back.
The problem started when I selected 123 for the first time in the Full Qwerty mode.
Axum
Anything installed before the problems started?
I've had this problem before as well. Do you have any other SIP's installed?
I have the same problem, except mine also does it with the
123
456
789
Caps0Symbol
keyboard. Yes, a horrid explanation, but I have no clue what the English word for it is, since I'm running Danish OS.
go here for a few fixes
http://forum.ppcgeeks.com/showthread.php?p=617541
http://forum.ppcgeeks.com/showthread.php?p=507768
same happened to me today, and it came back after doing the regedit fix
i found that the change to T9 mode in advance config or HDtweak was what was causing it to come back
have now disabled all the T9 options throughout and seems to have stayed put
How do I completely remove t9 from full qwerty? I dont even want to see the little bar that appears when I begin to type.
Thanks
CorruptedSanity said:
How do I completely remove t9 from full qwerty? I dont even want to see the little bar that appears when I begin to type.
Thanks
Click to expand...
Click to collapse
Go to touch input settings and uncheck everything.
I did, I no longer get suggestions but the knob or switch is on T9 by default when I begin to type and I get the bar above that duplicates whats being typed (in an sms for example).
CorruptedSanity said:
I did, I no longer get suggestions but the knob or switch is on T9 by default when I begin to type and I get the bar above that duplicates whats being typed (in an sms for example).
Click to expand...
Click to collapse
Hmm strange sorry man I got nothin. Maybe disable supportmssip in hklm/software/tegic/et9 ?
Ok I noticed that its on ABC not t9 when I attempt to enter text on tasks for note for example, but text entry in sms is set to t9 by default. Weird, shoulndt it be consistent between applications.
I just got Sprint HTC Touch Pro 2 windows mobile 6.5. The only options it gives me for text input are full qwerty, compact qwerty and phone keypad. I found transcriber in the windows directory & am able to use it. However, there used to be something called "keyboard" which I really liked and I can't find it anywhere. Can anyone help me. Thanks for your help.
Hey,
When you are in your text field at the bottom of the screen you should see a keyboard icon. I know on 6.1 it is between your two reply and menu I believe in 6.5 it so n the side.
When you click it, it opens your keyboard then there should be a little arrow beside that icon click on the arrow.
This should give you the options of phone keypad, Full QWERTY and keyboard. under those will be other input methods which have transcriber keyboard, letter recognizer and block recognizer.
If some things arnt there then sprint may of had them removed and you might want to look on the forms to find a CAB for a new keyboard.
thanks for the help. i guess sprint did remove them, because they just aren't there. does anyone know of a cab file that would restore them?