Hi,
I cant see the HTC Home application (with time, weather, calls....) on my Today screen.
I've gone to Parametres>Today>Active HTC Home on my today screen but i still cant see it !!!
Any help !?
Ty
have you tried a soft reset?
I had this problem before.
Could be the same.
Take out the memory card and do a clear storage.
The phone will reset and install the necessary without the interference of programs installing from memory card.
After everything is complete with programs installing from the phone insert the memory card.
Did you install HTC HOME CUSTOMIZER??
Related
Hi - I've been lurking and trying some of the less intensive, flashing-not-required tweaks with success. But suddenly today, I'm having an issue.
My MDA/Wizard is all of a sudden frozen! I havent done anything to it since I got to work today (except blug it in to charge it) and on my way to work, it was operating fine - I watched some anime, read an ebook and listened to music with no problems.
What I've noticed:
- Signal light flashing, but cant get to phone app, doesn't ring when call comes in, gets a generic on-screen notification with no Call ID
- Screen frozen, can hear tapping noise, but nothing happens
- Goes to sleep mode and Power button can wake up as normal, but still frozen and Power button wont turn off device
- Buttons make noise when pressed, but no result
- Of all of the plug-ins (3) and built-ins (5) that are usually on screen, my Messages one has suddenly disappeared.
Today Screen:
*Date
*Owner
*Tasks
*Messages - GONE
*Agile Msgr
*SPB WMP plug in
*SPB Weather
*Device lock
The last thing that I installed was a .cab file from the Big All Tweaks Thread - it was the one that got the Caps/Fn indicator and "E"dge indicators on screen. But EVERYTHING was working after the install and til 15 min ago (14hrs total). I've soft reset about 6 times and even took out the battery with no luck. If I plug it into USB, it charges, but no recognition from AS.
Please help! I'm at work, my contacts and stuff are on home PC.
I'm running the original T-Mobile Rom and I'm not unlocked yet (I was trying to get up the nerve this weekend!)
Thanks in advance!
Hmm....no response?
I'm hope now...
I am beginning to wonder if my problem isn't related to the issue that pple seem to be having with the MDA zapping the SD card. I took out my card and then did a soft reset. My device is workign just fine with out it. Seems that if I put it bak in, there it goes freezing again.
The card seems fine when I put it in the reader, but if the MDA is having a problem with it, I'll be mighty vexed, as it is a week old 1gb card
If anyone has any imput, please chime in.....
I am wavering between trying to figure this out....or just going for it and updating my ROM while I'm going thru all of this anyway...
:nervous:
i have the same issues with about the same software loaded and freezes. to recover from the freeze, i press the reset button and while the phone boots up i press the phone "answer /hangup" buttons once or twice and it boots up.
i do notice something strange after a reboot- the programs on the 1gb sd card are no longer recognized. when i check file explorer, i can see the wizard has creadted a new file store location called 'Storage Card" and it has renamed my stoage card " Storage Card 2". All my files are then seen on "storage Card 2" but cannot be run.
i then deleted "storage card" and rebooted. the wizard then automatically renamned "sorage card 2" back to "storage card" and all my installed programs were ecognized and worked just fine. i suspect there is a bug in the OS regarding stogae card recognition at boot up . any ideas on this ?
thanks
Hi, I'v got O2 XDA Mini S and a "little" problem with it. I'v just installed Phone Profiles [Second Edition] 8.0 and it crashed my phone. After installation (on my memory card), I could not see it on my today screen...so I'v tried to configure it in today screen configuration - but I could not get there - the configuration we're not accessible (it crashed). So after that, soft reset. And the real problem began. After the boot screen and "windows mobile welcome screen" the mobile just freezes. Active sync on my PC connects to it just for a second, then disconnects. The Phone Profiles [Second Edition] 8.0 is installed on my memory card, so I'v removed the memory card - the same problem. It was annoying - so hard reset....does not help. I have Wisbar Advance 2 as well, which is starting first and I can see only the welcome screen of it (sometimes it loads and I can see the whole skin). Sometimes (after reboot) I can see the menu, today screen etc. but the phone freezes. I think that the Phone Profiles [Second Edition] 8.0 is freezing the phone after his process starts. Is there anything like "safe mode" start or something like that, which could help me to remove this soft ? Or any other way to normally start the phone ? Any ideas ? Many thanks for help.
It should start after hard reset - phone profiles, wisbar advance will not load after a proper hard reset - the phone will be back to factory condition.
Did you do proper hard reset? After that it sounds like phone profiles should be installed to device memory not storage card. Most today plugins only work properly on device memory.
I'v done the hard reset (I think it was done properly - comm manager and voice command button pressed in the same time and then reset button). But after I'v pressed these buttons, nothing specially happend....the phone was still off. So I'v turned it on....and there were no changes with the software - still the same. Maybe I'm doing the hard reset wrong ?
leez said:
I'v done the hard reset (I think it was done properly - comm manager and voice command button pressed in the same time and then reset button). But after I'v pressed these buttons, nothing specially happend....the phone was still off. So I'v turned it on....and there were no changes with the software - still the same. Maybe I'm doing the hard reset wrong ?
Click to expand...
Click to collapse
Yep sounds like hard reset is not done. Press these 2 buttons but keep them pressed and dont let go - then press reset with the tip of the stylus and then text should come on the screen with black background. Press green (call) button and hard reset will commence.
Or you can first turn device off - then press the 2 buttons and keep them held and press power on to reach the same screen.
Ok, I'v done it. Many, many thanks for help. The phone manual is wrong (!). . Anyway Phone Profiles [Second Edition] 8.0....WTF is that ? This program just crashed my phone and I need to reinstall all the soft. Wrrr. And I just wanted a profile manager . Thanks again for help ! :mrgreen:
Good, I am glad - try the one I use - its free http://www.winmobileapps.com/device/pocketpc/plt/plt_download.aspx
Nice one, got it. Thanks.
Running Midget crossbow wm6
I checked all of the posts on Universal and there is no information leading to any easy solution. After installing SPG pocket plus everything seemed fine. To be sure its all ok even after soft reset I use SPB pocket plus "Soft reset button" on today screen. After soft reset there is no Today screen. Only windows logo. Power button does switch off and on the device. Green light is flashing as it has reception. Took SD card and sim card off, soft reset it but still hangs on Windows mobile green logo.
I was hoping there could be some sort of information how to get to SPB pocket plus SAFE MODE. No matter when i reset it, no option to get to safe mode is given. Any ideas apart from Hard reset?
PS: After Hard reset, do I loose all sms? Are they synchronised somewhere on my desktop PC?
safe mofe
why after istalliing spb pocket plus and soft reset device work on "SAFE MODE"?
and start up slow working?
No Safe Mode after Soft Reset when SPB pocket plus installed
After a Soft reset using SPB pocket plus button on Today screen windows got stuck on windows mobile boot screen, no change after 20 minutes. I guess SPB pocket plus just messed up today screen and hard reset is needed. So much for SAFE mode. SPB pocket plus will not be my favourite aplication for sure. So there is no magical button combination to solve this?
I too is using pocketplus and didnt had ne prob from last 2 months , i m sure ur startup folder is messed up or u must have deleted ne other startup file which is causing it to hang at startup .
I'm assuming that you installed Pocket Plus in the main memory and not your SD card...? You must install it to the main memory...at least to avoid (most) startup problems. I was able to get it running off the SD card, but only briefly. To do so, I had to adjust the order of my startup services...sending the SDdaemon to the front of the line and Pocket Plus to the end of the line. Still this is not recommended as Pocket Plus weaves itself into the startup services pretty tightly.
I uninstalled the software and reinstalled in the main memory with much better stability.
To get my unit to boot up when it snagged at startup, I had to soft reset 2-3 times and it ultimately started okay. After which I performed the uninstall to move the application from the SD card to the main memory. I wasn't completely set up with all of my software, otherwise I would have tried to use Pocket Mechanic's Relocate function to see if I could move it that way. Anyone else done this and can add their experience to this thread?
Good luck!!!
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
thierry86 said:
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
Click to expand...
Click to collapse
Since no hard reset is available... try removing the battery for the whole night.
If you do manage to get to windows then watch out for the startup folder, you're probably overloading the memory at startup.(htc home and psxut eat a lot at startup and windows as well)
i have removed the battery, sim and sd, and just left it there the whole night, but it still won't go further than the windows boot screen...
any suggestions ?
is is possible to do a hard reset by connecting it to usb and enter the bootloader somehow ? if yes, how ?
thanks!
hi,
have you tryed entering bootloader by the normal process?
"Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camera + Soft Reset, then release soft reset and keep pressing camera button till appear the Boot Loader.)"
regards
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
Okay then there is still hope.. When you have connected the device run an opdate tool like the NVID WM5 Rom.. that should work as a hard reset..
are there any working links available for this ? rapidshare seems to have disabled this...
thanks!
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
As long as you are able to enter bootloader then you can flash it with any old prophet rom. I had the same issue after installing WM6 rom. I used a Spanish rom on wiki to bring it back and then installed WM6 VII touch. So far it has worked well for a week.
HTC 6tab Home screen killed my 818pro!!!!!!
Here is what happened a few days back. My 818pro (aka prophet) suddenly heat up while not in use 3 days ago. I thought it was caused by the hot weather in my country (I was driving with aircond in full blast). The heating up eventually go away. Then 2 day later, after I put down a call, my phone just frozen / hung. Hence, I do a soft reset & guess what It never recovered & stop at the black screen with the dopod logo while restarting. Some service centre I visited told me that the main memory chip need replacement & reflash!!! I can't even see the window screen. I have use the HTC 6tab for 2 months & I am very sure it's the culprit here. Hopefully you are not having the same problem like me
Try plug in the ac charger before u do soft reset. My phone need it in order to restart after soft reset (after I started using the HTC 6tab Home Screen).
That is before my phone die yesterday
Hello to everybody!
this is a great job you are doing here!
there is a bit of a problem.
i had wm6 arte 100 with:
IPL:3.13.0001
SPL:3.13.0000
GSM:02.94.90
OS:3.13.00
and after running uspl :
SPL:1.11.0000 (I'm sure)
OS:3.13.0.0 (I think)
after a soft reset and a full restart all were running properly.
i took out sim card and sd card connected properly to pc and started the
o2 premium 2.0 full
the procedure went well i made some setup regarding appearence and tried a restart (not soft) for the sim and sd cards to mount.
the ppc boots i see the htc moving start-up screen and then stays in the usual green "windows mobile" screen.
is there any case it can be fixed or should i start trying to see if it can fly?
thank you very much at least for chance to see something different in my artemis screen!
keep walking
after trying several kind of restart here is what,
i pressed both selection keys and at the same time pressed the soft reset button and i kept pressing the selection keys untill a msg in black backround informed about a proccedure that would take place and erase all data etc,etc
i presssed the green key and after 10 sec i was working again full.
i proceded to further settings regarding touch flo and soft reset for the settings to apply, all well also!!!!!
i really do not how but i think i did it !!!!!!!!