Database Users

For anyone having problems with activesync - my solution...

Okay - I was having no end of problems connecting to Activesync and syncing to Exchange (local desktop would work ok), sometimes activesync on the desktop pc would stay at 'connecting' other times it would try to connect, but fail with error code 80072efd or 0x85002003. I also kept getting the error message on the PDA - unable to connect with your network settings (or something like it...).
After a couple of days trying to get it working (and occasionally succeeding after hard resets etc) I started investigating...
So, I checked a few things... Activesync 4.X uses a Remote-NDIS host on the PDA to make an IP based lan-type connection to your pc. Check your settings in
Settings > Connections > Network Cards > Network Adapters
for the 'Remote-NDIS Host'.
Mine had been set on 'Use Specific IP Address'. Change this to 'Use Server-Assigned IP Address'
Now check that it says ' My network card connects to' and that work is selected.
Now check Settings > Connections > Network Cards > Connections'
and check that the proxy server states - This network connects to the Internet' and that there is no proxy server specified.
I don't know if this will sort any issues out for anyone else - but it worked a treat with mine, so having spend days trying to get it working I thought I would share my horribly annonying experiences!!!
Hope it helps,
Liamo

on secoind thoughts - this has caused me more problems... grr I hate activesync - ignore my babbeling....
If I sort it properly I will post again..
i'm off to eat some apple-humble pie.
liamo
:-(

Okay,
so I uninstalled version 4.1 of activestink and installed the latest version 4.2. I created the pairing and hey presto - it's synching again.
Yup - it's great fun.
ohh, I also hard-reset in between 'cause I was annoyed!!!
;-)
liam

this worked for me.
i too faced the 'spinning wheel' problem with active sync.
i figured out that it was the configuration of the desktop or laptop and not the wizard as such.
1. after connecting the USB, i cud see messages like RNDIS device ready and all.
2. after this click on the lan icon in the taskbar of desktop. it displays all the lan connections. select the one that is for windows based mobile device.
3. in the properties for this lan connection, in general tab, check the box for Internet protocol.
4. In the advanced tab, click on settings for windows firewall.
5. check if activesync is added to the exceptions list. if not, check the box for activesync. click ok.
this should solve the problem. i sometimes have to do each time i connect thru usb.
hope this works.

hey guy i also had the same problem and although the first post was somewhat helpful, i still had to take an extra step in order for activesync to connect properly.
1. after changing to " Use Server-Assigned IP Address" in the connections tab i then had to:
2.go to the "usb to pc" interface and uncheck "enable advanced network funciotnality"
thanks for this post - i couldnt get my activesync to woork for the past 5 days

Activestink 4.2 won't even start on my computer :lol:
I don't really need it anyway :roll:

Anyone got stuck when Activesync keeps "Retrieving Settings" endlessly ???

moedinha said:
Anyone got stuck when Activesync keeps "Retrieving Settings" endlessly ???
Click to expand...
Click to collapse
You should make the activesync on the phone a serial connection instead of a ndis connection, this cab helped me:

great man! i tried everything and this really works. thanks a lot

mrjay said:
great man! i tried everything and this really works. thanks a lot
Click to expand...
Click to collapse
You're welcome
It was driving me crazy the first day I had my wizard.
you can also use a registery hack:
use your favourite regeditor;
change
HKLM\Drivers\USB\FunctionDrivers\“DefaultClientDriver“=“RNDIS“
into:
HKLM\Drivers\USB\FunctionDrivers\“DefaultClientDriver“=“Serial_Class“
Erase:
HKCU\Comm\RasBook\’USB\“Entry“
do a Soft-Reset.
check after the reset if a:
HKCU\Comm\RasBook\’USB\“Entry“ key has been made for serial communication otherwise it won't work.

the-equinoxe said:
moedinha said:
Anyone got stuck when Activesync keeps "Retrieving Settings" endlessly ???
Click to expand...
Click to collapse
You should make the activesync on the phone a serial connection instead of a ndis connection, this cab helped me:
Click to expand...
Click to collapse
How can I run this cab if I can't use Activesync? (My PPC (MDA Pro) is in a vanilla state)

in my case was easier because i was able to copy on the ppc but i couldn't copy from it. trry to load it somewhere where you can take it from with your phone.

I've tried d/ling it from here but It doesn't save as a cab file.

Slave1 said:
the-equinoxe said:
moedinha said:
Anyone got stuck when Activesync keeps "Retrieving Settings" endlessly ???
Click to expand...
Click to collapse
You should make the activesync on the phone a serial connection instead of a ndis connection, this cab helped me:
Click to expand...
Click to collapse
How can I run this cab if I can't use Activesync? (My PPC (MDA Pro) is in a vanilla state)
Click to expand...
Click to collapse
This is the trick I found out:
Connect your phone, wait till activesync starts.
Run taskmanager on your pc and kill:
WCESMgr.exe and wcescomm.exe
Go to your explorer (again PC) and doubleclick:
C:\Program Files\Microsoft ActiveSync\wcescomm.exe
Activesync will run now without errors (but doesn't sync!).
click on explore, copy the cab to the phone.
Disconnect the usb-cable, start the cab on the phone.
Reboot the pc, reconnect the usb-cable and activesync will sync again

the-equinoxe said:
mrjay said:
great man! i tried everything and this really works. thanks a lot
Click to expand...
Click to collapse
You're welcome
It was driving me crazy the first day I had my wizard.
you can also use a registery hack:
use your favourite regeditor;
change
HKLM\Drivers\USB\FunctionDrivers\“DefaultClientDriver“=“RNDIS“
into:
HKLM\Drivers\USB\FunctionDrivers\“DefaultClientDriver“=“Serial_Class“
Erase:
HKCU\Comm\RasBook\’USB\“Entry“
do a Soft-Reset.
check after the reset if a:
HKCU\Comm\RasBook\’USB\“Entry“ key has been made for serial communication otherwise it won't work.
Click to expand...
Click to collapse
I've make the registry changes but after soft resetting, no HKCU\Comm\RasBook\’USB\“Entry“ key has been created. Can you please post the contents of that reg key so I can put in manually otherwise is there something else I need to do to get the key created?

I have also had a similar problem with my computer and my Qtek 9100 not "finding each other" properly for a sync over USB ince the day I bought it over a year ago. Haven't been too bothered with it, as I've synced via BT instead (which works perfectly).
Still, technology that doensn't work properly seriously anoys me. Having tried all other available and suggested solutions I stumbled across the-equinoxe's recepie of reg-changes. After following the instructions I also ended upp with no HKCU\Comm\RasBook\’USB\“Entry“ for serial communication.
Therefore, I would like to repeat sunseakers call for help... Could anyone tell me what the contents of that entry is supposed to be?
Thanks for any help!

...i don't know if this will work for you, but i attached mine usbreg...

Thanks Krinkie.

ActiveSync must be one of the most frustrating applications out there. I have tried all recommended fixes and still cannot get ActiveSync to recognize my MDA. The last time I did a sync was 9/06. Too much BS using this application. I have searched all over the web and cannot find any application that will allow me to update my PIM file without ActiveSync. So, I guess I will finally give up on this. Thanks to all of you who have tried to help me. Thank You!!

I've been trying for days to connect to my laptop and the file above 'rndis to serial' finally did the trick... I'd read elsewhere about turning off your firewall etc, in the end I'd uninstalled all my firewall, anti spyware and antivirus programs...
Thank god for everyone here at XDA-developers... there wasn't anything useful on the Microsoft site.

Browsing device without activsync?

Is it possible to browse the device through USB without installing activsync?

You can download a small program called wm5torage. This enables you to connect your laptop to a pc as if it were a mass storage device. You can only browse whats on the memory card though, not system files.
If you want to browse through system files then Activesync is the only way i know of doing this. There may be a third party app somewhere, but you'd still have to install it so there's probably not much point..

I tried wm5torage some time ago (v1.6) and didn't work with my TyTN... it worked with my friend's wizard. Don't know if there's any newer version which works.... did you get it working on the Hermes?

Dont take time to try wm5torage on Hermes. I asked Seems there is no way to get it work.
http://www.modaco.com/index.php?showtopic=238545&st=400

ver 1.71 has been posted in this thread http://www.modaco.com/index.php?showtopic=238545&hl=wmstorage but the download page says the file is broken.

I run an FTP server on my TyTN. That way you can access and manage all files on your device via Activesync or a Wireless connection.
This one is basic, but free and does the job well:
http://www.freefloat.com/index.php?...=http://www.freefloat.com/p9614/p9614_swe.php
Make the FTP server point at the root of your device for full access to all files and folders.

i tried the ftp server, but it seems to be super slow to transfer files. I think it's faster using active sync to browse.

See here.
http://forum.xda-developers.com/viewtopic.php?t=62411
WM5storage doesn't work for me.

it should work when you disable advanced network functionality in: connections - USB to PC...
but when I disable that I get an error:
failed to disable RNDIS to use serial
even when I disable active sync to use USB when cradled.
any ideas?

new actie sync
My active sync does not sync my contacts. I have been told to download a new active sync. Does anyone know where I can get this from?
thanks
Scot

scotdevlin said:
My active sync does not sync my contacts. I have been told to download a new active sync. Does anyone know where I can get this from?
thanks
Scot
Click to expand...
Click to collapse
http://www.microsoft.com/windowsmobile/activesync/default.mspx
Mike

scotdevlin said:
My active sync does not sync my contacts. I have been told to download a new active sync. Does anyone know where I can get this from?
thanks
Scot
Click to expand...
Click to collapse
You may try the developers website...let's see...what were they called again. Oh yeah, Microsoft.

thanks! realise its a dumb q

nvm, half asleep

Anyone have any ideas if any PC i hook my phone up to says "USB Device Not Recognized." I've tried 3 PCs (work, home and laptop). None of which work. Any ideas?

try this!!!!!!!!
Chris The Ninja Pirate said:
See here.
http://forum.xda-developers.com/viewtopic.php?t=62411
WM5storage doesn't work for me.
Click to expand...
Click to collapse
Ah, but have you tried this?​
Goto: Start Menu > settings > Connections > USB to PC
Now, untick the box that says: "Enable advanced network functionality"
Now try reconnecting your Hermes! ​

Tried this, found it to be the best:
http://www.softick.com/pocket-pc/cardexport2/
Works on wm5 haven't tried it on wm6 yet (will install it soon) it's not free but it's worth it to try out the demo and see for yourself.

Please help! Unable to sync!

Hi everyone! When I connected my jade to my pc via usb, i got the usual screen asking me how i want to connect to the pc. Through activesync, internet sharing or disk drive. I chose internet sharing the last time to try this function out. However, the next time i connected via usb, the selection screen did not come out and it automatically went to internet sharing. Each time i connect via usb, this is what happens! Furthermore, i am now unable to sync! I tried going to activesync and pressing sync but to no avail! Could somebody help me please?!? Thank you in advance!!!

Try this...
1) Without connecting to PC.. on PC open ActiveSync. Select File - Delete Mobile Device - Confirm deletion.
2) On Jade, open active sync - options - delete all data
3) Now connect usb and configure connection again.
Hope that works.

Or on your Jade:
Click Start>Settings>Connections>USB to PC...
Make sure that the checkbox at the bottom of the screen is checked.. That way it will always ask you what mode you want when connecting the device to USB...
HTH!

izzyzc said:
Or on your Jade:
Click Start>Settings>Connections>USB to PC...
Make sure that the checkbox at the bottom of the screen is checked.. That way it will always ask you what mode you want when connecting the device to USB...
HTH! [/QUOTE
Thanks izzyzc but it was checked at the time that's why i was puzzled as to when i connected it would go straight to the internet sharing screen instead of giving me a choice.
Click to expand...
Click to collapse

azahidi said:
Try this...
1) Without connecting to PC.. on PC open ActiveSync. Select File - Delete Mobile Device - Confirm deletion.
2) On Jade, open active sync - options - delete all data
3) Now connect usb and configure connection again.
Hope that works.
Click to expand...
Click to collapse
It worked azahidi! Thanks millions!!! Appreciate your help!

I can confirm having this problem as well on the stock rom; sometimes internet connection sharing gets very attached to the USB connection

Have similar problem
Trying to transfer contacts from Outlook 2007 to Contacts in JADE Clone, it synchronizes all data except contacts what is a bit annoying.
Tried to do all mentioned above but no success.
Every time after opening ActiveSync settings, contacts are grey and impossible to mark them for Sync.
Could anybody advice pls?
Type approx 400 contacts again is nightmare.
Thanx

Kajmaj said:
Trying to transfer contacts from Outlook 2007 to Contacts in JADE Clone, it synchronizes all data except contacts what is a bit annoying. Tried to do all mentioned above but no success.
Every time after opening ActiveSync settings, contacts are grey and impossible to mark them for Sync. Could anybody advice pls?
Type approx 400 contacts again is nightmare.
Thanx
Click to expand...
Click to collapse
Sometimes it's defaulted to "sync with PC". In Options, try uncheck that on PC contact folders, then check on server contact folders.

I have tried it, but no success.
Later on found (thanx to Google ) and installed Chapura Pocket Mirror Professional 1.0 trial and it went through and whole Outlook has been synchronized.
Now I works even w/o Chapura Pocket Mirror.

Active Sync problem[Solved]

Hey & thx for reading
Recently i performed an upgrade form the HTC site. I was succesfull (except i had to install everything again )
Now, the problem is that, when i connect the phone to the pc (XP SP3) with the usb cable, it doesnt ask what to do.
I used to get a choice of 3 option: Sync, diskdrive or shared internet.
Now it doesnt ask that and it directly opens the shared internet. I tried adjusting the settings in the "connections" tab but no luck.
Can this issue be resolved? I would like to see the 3 choices again when i connect the phone.

you did tap the tiny 'ask me' box in:
start ->settings -> connections -> usb to pc (al the way down the screen)?

Vinzend said:
Hey & thx for reading
I used to get a choice of 3 option: Sync, diskdrive or shared internet.
Now it doesnt ask that and it directly opens the shared internet. I tried adjusting the settings in the "connections" tab but no luck.
Can this issue be resolved? I would like to see the 3 choices again when i connect the phone.
Click to expand...
Click to collapse
Even if it automatically select "shared internet" it can be disconnected and continue with activesync.

Nirak said:
you did tap the tiny 'ask me' box in:
start ->settings -> connections -> usb to pc (al the way down the screen)?
Click to expand...
Click to collapse
That was my 1st guess. I have checked and unchecked it many times but the result stays the same.
azahidi said:
Even if it automatically select "shared internet" it can be disconnected and continue with activesync.
Click to expand...
Click to collapse
If i close "shared internet", active sync(pc) doesn't connect to the phone and the active sync app on the phone just says "connecting".

Try this
http://forum.xda-developers.com/showpost.php?p=3816683&postcount=7

The problem is a bit solved. I unchecked the "choice" boxe, did a soft reset, checked it again and it worked. Active synce asks me what to do again
Now, it works about as good as before. Just need to figure out why Active Sync is open in the taskmanager even when i don't use the phone :/
Thx all for helping (and reading)

Vinzend said:
Just need to figure out why Active Sync is open in the taskmanager even when i don't use the phone :/
Thx all for helping (and reading)
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=481235

How do I stop ActiveSync's autosync?

Hi TP2-ers!
Since using my TP2, ActiveSync continuously syncs it with my PC. When I used AS with my old PDA (QTEK 2020i) I could select manual sync, but this doesn't seem to be possible when connecting a WM6 device.
I tried all the tricks (changing registry entries Continuously Update and Update on docking to 0), the exchange server trick to enable the AS schedule button and setting it to manually, all to no avail...
I know of tools like ActiveSync Toggle, but I do not want to disable AS, I just want to sync manually when I think it's time to sync!
Has anybody out there been able to disable the autosync in AS in combination with the TP2?
Thank you very much for your reply in advance!
Kind regards,
Piet

Open ActiveSync on your phone, then click on MENU on the bottom right, then select SCHEDULE and set both peak and off peak to MANUAL. After that it won't sync unless you go in and sync it yourself.

Connect to PC
What about when the "Connect to PC" screen appears when you plug it in via USB? For a week or so if I didn't touch the phone it would disappear and Internet Sharing would open and automatically connect! it was awesome, but now the ActiveSync bubble is selected and it opens ActiveSync on my PC. Are there any registry values to reset this?

So open ActiveSync on the phone again, select MENU at the bottom right, select CONNECTIONS, and uncheck "Synchronize all PCs using this connection"
=)

fvultee said:
So open ActiveSync on the phone again, select MENU at the bottom right, select CONNECTIONS, and uncheck "Synchronize all PCs using this connection"
=)
Click to expand...
Click to collapse
Nope, all that does is go directly into the "Disk Drive" option....It used to open Internet Sharing and connect automatically. I even removed my SD card and it just charges the phone.

Have you tried to end the partnership between your phone and your computer from within the ActiveSync software on your computer? That should do it as well.

fvultee said:
Have you tried to end the partnership between your phone and your computer from within the ActiveSync software on your computer? That should do it as well.
Click to expand...
Click to collapse
First, I really appreciate your help...now, let's make sure we are on the same page. I don't have a problem using internet sharing, that works fine. My issue is that I want the internet sharing program to start on my phone automatically whenever I connect to pc.

Oh, hilarious, I've been responding to you assuming you were the person who posted the original post. I've been trying to resolve his issue, not yours. Oops. As for your internet sharing issue, no idea. I use WMWifirouter for my WIFI and wired network sharing, and it works GREAT, though I do have to click the program icon before it fires up.

SUCCESS!!!
ok, so I went into the battery properties and unchecked the "when device is turned on, do not charge the battery when connected to the pc" This reset whatever I was looking for and now when I connect to pc via usb and don't touch anything it automatically starts internet sharing and connects. LOVE IT!!!

fvultee said:
Open ActiveSync on your phone, then click on MENU on the bottom right, then select SCHEDULE and set both peak and off peak to MANUAL. After that it won't sync unless you go in and sync it yourself.
Click to expand...
Click to collapse
The schedule option is grayed-out.
It's also grayed-out on the PC and you can enable it through the old fake server trick, but although it's set to manually, ActiveSync still syncs continously...
Thansk!

fvultee said:
Have you tried to end the partnership between your phone and your computer from within the ActiveSync software on your computer? That should do it as well.
Click to expand...
Click to collapse
No, because I don't want to disable sync, I just want to be able to contol the moment of syncing!