Related
Hello everybody
when i update my device to a newer rom i found couple problems on my hardware keyboard ,, and somebody told me you have to copy keybddr.dll from your previus rom ( i-mate K-Jam 2.16 arb ) then copy the file to windows folder on the newer rom ( accept the replacing )
but when i try to copy it i get the message : you can't copy the file
i used resco explorer and total commander all same problem.
im not an experience on dumping , if something can i do it without coding ; it will very well .
if you need the rom here you are ftp://ftp.clubimate.com/K-JAM_Arabic_2160901_21609102_20710_ship.zip
thanx in advanced
In my mind, copy it is a problem, ovewrite it to your device is another problem. First problem is easy to deal, if the system is WM5, the second one perhaps is easy too if you can modify the registry to rename the drivers' name.
i would like to edit nk.nbf files (of course just for personal use).
have searched hours for an editor, but i cant find anything useful.
plz help me !
AFAIR you should only generate nbf file using "kitchen", not edit them.
jakubd said:
AFAIR you should only generate nbf file using "kitchen", not edit them.
Click to expand...
Click to collapse
are you sure ?
i found this app that allows you to edit WM 2003 nbf files (sadly it doesn´t work for 6.1 rom nbf):
http://wiki.xda-developers.com/index.php?pagename=ER2003Edit
is there an other way to edit WM 6.1 images ?
(maybe i can drop them from the device in a format that can be open)
editing nbf files
try this it works a treat and will help you understand thing a little more, Then you could read up on how to port it up a bit higher once you'v learnt how it works hope this helps be carefull when you CreatROM read the text in the dos window the "free sectors" !!!! 0??? To 0001 is good, 0001 been the full to the brim ! ( ffff???? ) is bad ! if bad do NOT flash to your device start buildOS again and unckeck something ealse read the readme or guide file carefully also explode has a kitchen out that's good search for kitchen on this site there's a assortment out there have fun REMEMBER be CAREFULL or you could brick your device however you edit a rom Most time if you screew up you can flash a 2003 shipped rom and alls well agian but if you flash a rom that's fare to big you will over wright your boot sector and that's NOT GOOD
http://forum.xda-developers.com/showthread.php?t=331636
how can i dump a ROM ?
have read xplode´s kitchen how to, but i have still some questions:
witch tool i have to use to dump a rom ?
must the device be in boot loader mode ?
must i perform a hard reset before putting the device in boot loader mode ?
thank you for you help
dump rom
wmvfan said:
how can i dump a ROM ?
have read xplode´s kitchen how to, but i have still some questions:
witch tool i have to use to dump a rom ?
must the device be in boot loader mode ?
must i perform a hard reset before putting the device in boot loader mode ?
thank you for you help
Click to expand...
Click to collapse
I think I read some thing about dumping from the device ! But it's very complicated to do and if you get it wroung then it could damage your device Buzz-dev has a program called grabit see his site it copys the rom from the device to The SD CARD as a *.bin file then you dump that instructions are there, I have attached a zip i found on this site moded a bit for myown use it will dump BA or Hima put it in C:\ and right click it select extract here PS (you need winrar it's free just search xda site for it) My decompilers not complete but should give you some idear or how it works, You say u got explodes kitchen follow his instructions and build his rom when It says put your device in boot loader DON'T. Wait untill the build is finnished Press ctrl + C then look in upgrade folder and you should find an nk.nbf copy this to Swamp395Decompiler folder so you see it with PKGTool then double click BA_Disasemble.bat when that's finnished double click PKGTool.exe then "File" "open" from menu navegate to swampy395decompiler\dump click OK read screen then When that's finnished meun "tools""build packages" you should have some missing files if you look at the one called sys it should look simaler to explodes kitchen!! Then spend some time reading xda site good luck Remember the risk is all your bla bla no responcerbility ETC
I'm learning myself ! But if i can help i will, I'v been Building My own kitchen It's getting close but not got a booting rom yet but soon I HOPE
PPS pda viet rom Don't bump so well
swampy395
It works !
i easily put the nk.nbf file in C:\Swampy395Decompiler\ and start BA Disassemble.bat
a dos window opened and dump the rom in C:\Swampy395Decompiler\dump
all files of the rom are now in this folder and i can edit them.
but i have still some questions:
-how can i make a rom out of the files in \dump ?
-how can i edit registry files ?
-is there a way to change the rom language ?
greetings from germany
editing rom
wmvfan said:
It works !
i easily put the nk.nbf file in C:\Swampy395Decompiler\ and start BA Disassemble.bat
a dos window opened and dump the rom in C:\Swampy395Decompiler\dump
all files of the rom are now in this folder and i can edit them.
but i have still some questions:
-how can i make a rom out of the files in \dump ?
-how can i edit registry files ?
-is there a way to change the rom language ?
greetings from germany
Click to expand...
Click to collapse
read these links and you'll find thing you'll have to do a lot of searches *.reg files open in notepad then save as unicode turn wordwrap off these a lot to read too much fro me to explane here these links should get you in the right area
Ps if you find any good tutorials please send me a link and as i find them i'll send to you good luck I'v been reading some 4 weeks now it's not so easy building a rom so i'v found
PPS the tools i send you copys and converts the default/user.HV files and initflashfiles.dat to swampy395decompiler folder i also posted a tool to edit initflashfiles see
http://forum.xda-developers.com/showthread.php?t=394680
search for kitchen building roms ETC you'll find thing like these
http://www.anichillus.net/index.php?topic=29.0
http://wiki.xda-developers.com/index.php?pagename=OEM Package Tutorial
good luck let me know how get on
swampy395
swampy395 said:
read these links and you'll find thing you'll have to do a lot of searches *.reg files open in notepad then save as unicode turn wordwrap off these a lot to read too much fro me to explane here these links should get you in the right area
Ps if you find any good tutorials please send me a link and as i find them i'll send to you good luck I'v been reading some 4 weeks now it's not so easy building a rom so i'v found
PPS the tools i send you copys and converts the default/user.HV files and initflashfiles.dat to swampy395decompiler folder i also posted a tool to edit initflashfiles see
http://forum.xda-developers.com/showthread.php?t=394680
search for kitchen building roms ETC you'll find thing like these
http://www.anichillus.net/index.php?topic=29.0
http://wiki.xda-developers.com/index.php?pagename=OEM Package Tutorial
good luck let me know how get on
swampy395
Click to expand...
Click to collapse
Just a quick thought you'v got a kitchen and a rom built in that kitchen put the rom back together as it is in the kitchen IE copy the layout you'll find some *.rug files missing download athers himalaya kitchens and read the help and guid files on how to build a kitchen and use explodes kitchen as a referance see if you can put it back together without copying files out of explodes kitchen If you manage that then you should be able to make a higher build kitchen of your own good luck
Hello my friends !
I need to creat a patch, in order to patch some dll and exe in \windows ( wm6.1 )
How can i creat a patch which allow to replace system files ?
Great thanks my friend !
Nixeus
..why don't u make a cab file?
But with a cab file, can I replace SYSTEM file ???
Yes..you can replace system files
Ok, thanks for your answer, i have use WinCe Cab Manager in order to create my CAB, but the setup failed on my ppc !
Have you an idea in order to solve it ? I try to replace the file battdrvr.dll, and the cab failed, when i want to install !
No idea ? Is the window folder locked ?
Nixeus said:
Have you an idea in order to solve it ? I try to replace the file battdrvr.dll, and the cab failed, when i want to install !
Click to expand...
Click to collapse
This has been adressed in 's battery forum in herm's rom dev this specific driver needs to be kooked into a rom
http://forum.xda-developers.com/showthread.php?t=392051
Nixeus said:
No idea ? Is the window folder locked ?
Click to expand...
Click to collapse
Use something like Total Commander to replace the file... (You may need to change the one in \Windows to not be read only, again using Total Commander)
mmm, i will to teste with total Commander !Thanks !
But it will very godd if i could make a patch.....
Nixeus said:
mmm, i will to teste with total Commander !Thanks !
Click to expand...
Click to collapse
Good luck!
or just change the registry key to load your driver instead (HKLM\Drivers\BuiltIn\Battery -> Dll) maybe it should work, dont know
mmm good idea I will test Thanks
Hello People
I have coded a solution for extracting roms automatically and make it ready for Bepe's Kitchen.
How to: V2
- Extract the KitchenV2.rar
- Put the extractRom.exe and the Tools2 Folder wherever you like (but it must me together in a folder)
IMPORTANT: DONT RENAME THE Tools2 Folder
- Put a nbh in the Tools2\NBH or a os.nb in the \Tools2\OS
- start extractRom.exe and chose your file
then Wait. It takes a few minutes and your kitchen is ready.
Be sure that the rom is not protected else it doesnt works
WORKS ONLY WITH THE NEWER GENERATION OF PHONES!!
TESTED WITH: NIKI, DIAMOND, BLACKSTONE, BREEZE
http://rapidshare.com/files/192469913/KITCHENV2.rar
Failure with build ROM
Hi Blackdragon_860,
many thanks for your effort - but unfortunately I must say that I have yet to find a
working dumptool for bepe's kitchen that fits the average user.
Using your toolset (put in the root of my drive) seems to create the structure just
fine but whenever I use build_rom.bat (from your kitchen or from bepes) it just gives
me an errormessage from platformrebuilder.exe:
Collecting standard packages and initializing hives...
ERROR! (errorlevel: -1073740777)
please press any key ...
I tried with the new HTC 1.93 GER ROM btw.
Any thoughts on that ?
/mst
P.S. why does yor tool need another location than platformrebuilder that makes it
even more difficult?
Thx for this, great work! one issue: I have made my Diamond roms with Surface Kitchen so far. I give this a go and I take one of my own roms and dump it and rebuilt it..I made no changes every thing went fine no errors and the new OS.nbh was created. Then I flash it but it dont boot, just the splash screen came up? the txt which allways come up normally where you seen the radio and protocol version didnt shown at all..How come?? What did I miss??
OK now I test a stock .nbh file and now the rom boot, but my finnish xt9 was gone I got just the ordinary keyboard in the rom, and the phone canvas is missing too in the rom, random acsess is gone
I used the 2.03 nbh
i use it for every "OFFICIAL" & "ORIGINAL" Rom
and it works greate..
i am working on a update,but for now it works.
greets
released V2
works awesome! THX
Great job! Perfect THX very much
thx for yours feedbacks..
I met an error like this:
Error: 0x80000009
'boot.rgu' does not exist in th specified paths!
Error! (errorlevel:1)
does this means the rom protected?
yes, when the rom is not protect or original it works 100%
Blackdragon_860 said:
Hello People
I have coded a solution for extracting roms automatically and make it ready for Bepe's Kitchen.
How to: V2
- Extract the KitchenV2.rar
- Put the extractRom.exe and the Tools2 Folder wherever you like (but it must me together in a folder)
IMPORTANT: DONT RENAME THE Tools2 Folder
- Put a nbh in the Tools2\NBH or a os.nb in the \Tools2\OS
- start extractRom.exe and chose your file
then Wait. It takes a few minutes and your kitchen is ready.
Be sure that the rom is not protected else it doesnt works
WORKS ONLY WITH THE NEWER GENERATION OF PHONES!!
TESTED WITH: NIKI, DIAMOND, BLACKSTONE, BREEZE
http://rapidshare.com/files/192469913/KITCHENV2.rar
Click to expand...
Click to collapse
dude i tried to extract wm6.5 rom with this. it did not extract ROM folder so i had to manually copy it. after that when i run the rom builder i get an error that boot.rgu is not placed in right paths. i think its supposed to be in XIP and it is there only. then why this problem?
I hope i can help u learn how to cook rom and makes it more easier!
1.Structure OF THE KITCHEN
ROOT OF THE KITCHEN-------
dump----> This will contan files dumped from ROM,like OFFICIAL ROMS.
OEM---->This folder contans all the OEM DRIVERS and OEM software
ROM\XIP\ ---->contain boot.rgu,don't mod or del it!
SYS -------->SYS of WM build
SYSNEW ------>TH SYS OF NEW version of WM building u will proting
temp ----->temp files,and ROM files u cooked are here
TOOLS --------->All tools that ness for cooking
XIPNEW ------>NEW XIP of WM version.there are two styles:XIP.BIN and MSXIPKernel.u can porting them by choose correct method in my bat command
reg&iniflashfiles_tools ------->Tools to edit reg files and initflashfiles.
HOW TO：
1、IF u don't want to Porting new version of wm and u just want to mod ,u can dump OFFICIAL rom.
TO DO：Place official ROM in root of kitchen，run "dump ROM.bat" and follow the instruction.when finished,u will find OEM AND SYS in DUMP\DUMP.Move them to root of the kitchen.and move xip.bin in dump to root of kitchen and rename it to xip_out.bin.Now,u can edit softwares in OEM and build as u like by run"Build ROM.bat"
2、IF u want to cook new version of WM build,just down load new SYS AND XIP file form somewhere like DFT.usually,u may only need these parts:COMM，COMM_0409,WVGA_COMM,WVGA_COMM_0409 and XIP.
UNZIP COMM，COMM_0409,WVGA_COMM,WVGA_COMM_0409 to SYSNEW folder,UNzip MSXIPKernel form XIP to XIPNEW folder then run"Build ROM.bat" and follow the guid.
sorry for my english...
hope u can understand...
-------------------------------------------------
sorry for my mistake..
i forget something important
just creat ROM\XIP\ folder in root of kitchen and put this boot.rgu in it
View attachment boot.rgu.zip
Download:TG01_ROM_KITCHEN.rar
ffboy2009 said:
I hope i can help u learn how to cook rom and makes it more easier!
1.Structure OF THE KITCHEN
ROOT OF THE KITCHEN-------
dump----> This will contan files dumped from ROM,like OFFICIAL ROMS.
OEM---->This folder contans all the OEM DRIVERS and OEM software
ROM\XIP\ ---->contain boot.rgu,don't mod or del it!
SYS -------->SYS of WM build
SYSNEW ------>TH SYS OF NEW version of WM building u will proting
temp ----->temp files,and ROM files u cooked are here
TOOLS --------->All tools that ness for cooking
XIPNEW ------>NEW XIP of WM version.there are two styles:XIP.BIN and MSXIPKernel.u can porting them by choose correct method in my bat command
reg&iniflashfiles_tools ------->Tools to edit reg files and initflashfiles.
HOW TO：
1、IF u don't want to Porting new version of wm and u just want to mod ,u can dump OFFICIAL rom.
TO DO：Place official ROM in root of kitchen，run "dump ROM.bat" and follow the instruction.when finished,u will find OEM AND SYS in DUMP\DUMP.Move them to root of the kitchen.and move xip.bin in dump to root of kitchen and rename it to xip_out.bin.Now,u can edit softwares in OEM and build as u like by run"Build ROM.bat"
2、IF u want to cook new version of WM build,just down load new SYS AND XIP file form somewhere like DFT.usually,u may only need these parts:COMM，COMM_0409,WVGA_COMM,WVGA_COMM_0409 and XIP.
UNZIP COMM，COMM_0409,WVGA_COMM,WVGA_COMM_0409 to SYSNEW folder,UNzip MSXIPKernel form XIP to XIPNEW folder then run"Build ROM.bat" and follow the guid.
sorry for my english...
hope u can understand...
Download:Uploading
Click to expand...
Click to collapse
U are the MAN!
Thank you.
Very nice
Hope I am now able to mod my favourite rom by myself now
Two worlds about how to integrate Sense in your ROMs maybe a good link if you have ?
Thanks
Edgar
I tested your tool and it is great as it is well guided.
but i can not find OEM folder in dump/dump only many folders containing "....dll" names and one folder called "SYS"
Also when editing OEM`s to the rom i get the error "Creating initialflashfiles.dat"
Looks like i am even not able to build a rom with a auto tool
P.S. Wanted to add cabs to your wm6.1 rom using this tool
eddgarms said:
Two worlds about how to integrate Sense in your ROMs maybe a good link if you have ?
Thanks
Edgar
Click to expand...
Click to collapse
Maybe this http://forum.xda-developers.com/showthread.php?t=633795 can help you.
FFboy: "IF u want to cook new version of WM build, just down load new SYS AND XIP file from somewhere like DFT."
What is DFT?
This is a DFT
Hello ffboy..
Can we use your tool to "modify" your sense rom, for exemple?
Thanks!
ps: moreover, i haven't got this folder "ROM\XIP\"...so i've got an error when i build the rom.
I tried to download your tool 3 times, but nothing....!!
What's wrong?
And I dumped the toshiba 6.5 rom, i did what you say in the first post and then i build the rom...
The original toshiba rom was 253mo and the new one is 244mo...but I didn't remove anything!!! Is this just because of the xip directory error i have during the "buildOs" process?
thanks!
iceeyes91 said:
I tested your tool and it is great as it is well guided.
but i can not find OEM folder in dump/dump only many folders containing "....dll" names and one folder called "SYS"
Also when editing OEM`s to the rom i get the error "Creating initialflashfiles.dat"
Looks like i am even not able to build a rom with a auto tool
P.S. Wanted to add cabs to your wm6.1 rom using this tool
Click to expand...
Click to collapse
Some roms that deleted all dsm and rgu files can't be dumped to OEM&SYS style
i can dump it out without do DM2PKG and copy all files in dump folder to SYS and do some mods.run kitchen maybe it works...
u want ro add cabs autoinstall on first boot?
just dump my rom to files and copy all off them into SYS,then creat a .rgu file and place it into a folder in OEM
add these in .rug file:
Code:
[HKEY_LOCAL_MACHINE\Software\TOSHIBA\AutocabInstall]
"cab1"=""
"cab2"=""
"Reboot"=dword:15
Nokser said:
This is a DFT
Click to expand...
Click to collapse
Yep!
That darkforcesteam。。。
pipolas said:
Hello ffboy..
Can we use your tool to "modify" your sense rom, for exemple?
Thanks!
ps: moreover, i haven't got this folder "ROM\XIP\"...so i've got an error when i build the rom.
I tried to download your tool 3 times, but nothing....!!
What's wrong?
And I dumped the toshiba 6.5 rom, i did what you say in the first post and then i build the rom...
The original toshiba rom was 253mo and the new one is 244mo...but I didn't remove anything!!! Is this just because of the xip directory error i have during the "buildOs" process?
thanks!
Click to expand...
Click to collapse
sorry fo my mistake...
download files in first threat
and it will fix erro..
the diff between ori rom and moded rom maybe because EXTRELOC useing a diff way to reloc moudules..i think
ffboy2009 said:
sorry fo my mistake...
download files in first threat
and it will fix erro..
the diff between ori rom and moded rom maybe because EXTRELOC useing a diff way to reloc moudules..i think
Click to expand...
Click to collapse
Thanks ffboy, i'll try!
pipolas said:
Hello ffboy..
Can we use your tool to "modify" your sense rom, for exemple?
Thanks!
ps: moreover, i haven't got this folder "ROM\XIP\"...so i've got an error when i build the rom.
I tried to download your tool 3 times, but nothing....!!
What's wrong?
And I dumped the toshiba 6.5 rom, i did what you say in the first post and then i build the rom...
The original toshiba rom was 253mo and the new one is 244mo...but I didn't remove anything!!! Is this just because of the xip directory error i have during the "buildOs" process?
thanks!
Click to expand...
Click to collapse
Size difference is mostly because of the IMGFS building, which may well be skipping free space at the end (used for ImageUpdate). It shouldn't matter too much.
I'll stick this, and unstick the other kitchen.
ffboy2009 said:
Some roms that deleted all dsm and rgu files can't be dumped to OEM&SYS style
i can dump it out without do DM2PKG and copy all files in dump folder to SYS and do some mods.run kitchen maybe it works...
u want ro add cabs autoinstall on first boot?
just dump my rom to files and copy all off them into SYS,then creat a .rgu file and place it into a folder in OEM
add these in .rug file:
Code:
[HKEY_LOCAL_MACHINE\Software\TOSHIBA\AutocabInstall]
"cab1"=""
"cab2"=""
"Reboot"=dword:15
Click to expand...
Click to collapse
Sorry i do not really get it
I dumped a official 6.5 Rom and there is like u said a OEM and a SYS Folder in dump/dump.
Using DMP2PKG i get an error on my win7 32bit by choosing "select folder"
Dumping your 6.1 rom it seems that in the dump/dump folder the OEM and his sub folders are not created, so all the data is loose.
will try some stuff and see where it gets me
Edit:
error : \.VM\imageinfo.bin not found, getting this with official and your 6.1
iceeyes91 said:
Dumping your 6.1 rom it seems that in the dump/dump folder the OEM and his sub folders are not created, so all the data is loose.
Click to expand...
Click to collapse
When dumping a cooked rom it is unlikley that you will get an OEM folder, i do not know why but the OEM parts can be found in the sys folder and relocated. Only dumping an original rom gives proper file segregation, ie OEM+SYS
Made my own rom now. Changed a official one and put some oem's in OEM folder.
Have some questions though:
How do you add the information to the rom , that it automatically adds a xxx.lnk file in startmenu for each program you have been put to OEM Folder??
Also how do you insert another input keyboard to the rom??
I wanted to add Neo2007 driverpack to my rom but it tells me that the xxx.dll already exists. how do i bypass this??
And how do I upgrade the netcf??
I now this is a lot of questions and maybe they are stupid, but i am totally new to rom-development. Thanks in advance
Thank you for this great tool
iceeyes91 said:
Made my own rom now. Changed a official one and put some oem's in OEM folder.
Have some questions though:
How do you add the information to the rom , that it automatically adds a xxx.lnk file in startmenu for each program you have been put to OEM Folder??
Also how do you insert another input keyboard to the rom??
I wanted to add Neo2007 driverpack to my rom but it tells me that the xxx.dll already exists. how do i bypass this??
And how do I upgrade the netcf??
I now this is a lot of questions and maybe they are stupid, but i am totally new to rom-development. Thanks in advance
Thank you for this great tool
Click to expand...
Click to collapse
Could you explain: if /OEM doent exit after DUMP, do you fill with your new cab (transform in OEM?) and add a registry entry ?
super_sonic said:
Could you explain: if /OEM doent exit after DUMP, do you fill with your new cab (transform in OEM?) and add a registry entry ?
Click to expand...
Click to collapse
I used this application to made my OEM's http://forum.xda-developers.com/showthread.php?t=525302
I just converted and put them into OEM folder.
Btw 1 thing concerning your 6.1 rom ffboy
Dumping it and putting everything to SYS does not work. I can not rebuild the rom , even if I do not add anything in OEM
iceeyes91 said:
Made my own rom now. Changed a official one and put some oem's in OEM folder.
Have some questions though:
How do you add the information to the rom , that it automatically adds a xxx.lnk file in startmenu for each program you have been put to OEM Folder??
Also how do you insert another input keyboard to the rom??
I wanted to add Neo2007 driverpack to my rom but it tells me that the xxx.dll already exists. how do i bypass this??
And how do I upgrade the netcf??
I now this is a lot of questions and maybe they are stupid, but i am totally new to rom-development. Thanks in advance
Thank you for this great tool
Click to expand...
Click to collapse
1.ALL files in SYS and OEM placed default in WINDOWS folder.check initflashfiles.dat in OEM_LANG_0409 and initflashfiles.txt in ur own oem folder.these files can change the place of file.
if u want add FFBOY.LNK to startmenu,add command like this.
Code:
Directory("\Windows\Start Menu"):-File("FFBOY.lnk","\Windows\FFBOY.lnk")
2.input keyboard can be added by download someone posted,u may search ur self.
3.if buildos tells u that XXX.DLL or some tile already exist,check the name and search in SYS or OEM to see if there exist a file in same name.
if exist,delete them except the newest one.
4.NETCF in wm6.5 already version 3.5
iceeyes91 said:
I used this application to made my OEM's http://forum.xda-developers.com/showthread.php?t=525302
I just converted and put them into OEM folder.
Btw 1 thing concerning your 6.1 rom ffboy
Dumping it and putting everything to SYS does not work. I can not rebuild the rom , even if I do not add anything in OEM
Click to expand...
Click to collapse
what buildos tell info to u?