Related
This is a release for my ROM porting kitchen. It ports both XIP's and SYS folders. It currently supports the following:
Herald
Wizard
Prophet
Kaiser
Elf/Elfin
Hermes
Zinc
Athena
http://www.darthnet40.com/xda/ivanmmj/Kitchens/
(You will need 7-Zip to open the file.)
This is compatible with Bepe's extended kitchen, but I don't believe he ever released one for every device out there. It requires a ROM folder with an extracted XIP folder within it. Just download the Herald's and you'll see what I mean. The ONLY tested section has been the Herald section as that's the only device that I have.
If your device is compatible with Bepe's kitchen or my kitchen, it will automatically launch the kitchen right after.
Instructions:
Delete your old SYS folder
Place the SYS file you wish to port into Working_Folder
Place your xip.bin that you wish to port into the Prepare folder
*Note: Close the XIPPort program after pressing "Make Packages." The script will take over after that.
You should not have a Working_Folder with an OEM, SYS and XIP folder (and a Tools folder if you have Bepe's kitchen, even more if you have my kitchen.)
Double click on the RunMe file and choose your device.
For those who have a kitchen:
Place bepe's kitchen in the Working_Folder (so that OEM/SYS/ROM and other folders are right within Working_Folder.) Alternatively, you can place also place all the files into EasyBakeOven's folder. Allow the Working_Folder to override EasyBakeOven's Working_Folder. You will not loose any data but will bypass a few "info" scripts. This will not cause any problems.
Obligatory Warning Label:
Use this at your own RISK. I cannot be held liable for any damage caused to your device by your own mistakes or by my mistakes in the instructions.
If you wish to know how to do this manually, head over to my HowTo thread.
Thank you's go to:
Bepe for his Extended kitchen and Herald/Atlas files
ababrekar for the elfin files
l3v5y and xvx45 for the Prophet files
character and ginminded for the Wizard files
Script for the Kaiser files
tjkhattak61 for the Atom Exec files
cruzzmz for the Zinc files
caxio for the Hermes files
irus for the Athena files
Changelog
V2.2
Added Athena Compatibility
V2.1
Added Prophet Compatibility
Added Elfin/Elf Compatibility
Added Hermes Compatibility
Added Kaiser Compatibility
Added Zinc Compatibility
Added Atom Compatibility
V2
Added Wizard Compatibility
Rewrote script to add expandability
V1.5
XIP porting complete
V1
SYS porting complete
Woo! I've failed to find a link for this up till now, but now I can cook some new ROMS!!
One thing, the read me doesn't include some of the more reason compatibility improvements...
Welcome to EasyBakeOven!
Devices supported:
Herald/Atlas
Wizard
Note: Make sure that the XIP in your recieving folder has been extracted already (You should have a ROM folder with a XIP folder inside it.) This is not an issue if you're using Bepe's Extended 6.1 kitchen or my own JustClean EasyBakeOven.
Thank you's go to:
Bepe for his Extended kitchen and Herald/Atlas files
ababrekar for the elfin files
l3v5y and xvx45 for the Prophet files
character and ginminded for the Wizard files
Script for the Kaiser files
tjkhattak61 for the Atom Exec files
cruzzmz for the Zinc files
caxio for the Hermes files
irus for the Athena files
Click to expand...
Click to collapse
l3v5y said:
Woo! I've failed to find a link for this up till now, but now I can cook some new ROMS!!
One thing, the read me doesn't include some of the more reason compatibility improvements...
Click to expand...
Click to collapse
Noted. Thank you!
Has anyone found this even remotely useful? If not, I will not pursue adding more devices.
Has anyone found this even remotely useful? If not, I will not pursue adding more devices.
Click to expand...
Click to collapse
I have! I've ported a Kaiser XIP and a Touch one to the Prophet! Problem is I couldn't find the latest builds so they where slightly out of date...
l3v5y said:
I have! I've ported a Kaiser XIP and a Touch one to the Prophet! Problem is I couldn't find the latest builds so they where slightly out of date...
Click to expand...
Click to collapse
Just for being nice to me, here you go!
That's the newest official build. Be careful of anything "newer," they're fakes.
It's the one labeled 19213.7z
You'll need 7Zip to open the file. In it as the xip.bin and the SYS folders.
Yay!!!
Porting time!
I have one feature request!
Would it be possible to build a feature in that cleans out the folders before porting?
I think I'll test later cause actually I'm in exam but I think it work, I'm on the same device as l3v5y so I'll make my test and maybe take to you Artemis files (my other phone)
Thank for your hard work
Great tool ivanmmj.... I have a few questions. I guess I don't fully understand the process.
I've been able to get the XIP folder, os.nb.payload and romhdr.bin files from a KAISER rom... plus I used the .VM and WinCENLS_WWE folders from a working HERMES rom, but I can't seem to get past the second boot screen. A question I had is... do we use the os.nb.payload and romhdr.bin we got from the KAISER? or do we use those from a working hermes rom? and the XIP directory, do we need to change anything in there? or is just extracting it out, enough to work?
Thanks in advance.
Awesome tool, looks like a dummy can me even port ROM's will try it out sometime. Thanks bunches!
l3v5y said:
I have one feature request!
Would it be possible to build a feature in that cleans out the folders before porting?
Click to expand...
Click to collapse
Already ahead of you. Today I noticed that I tend to leave a mess behind. lol I'll have it remove the files before replacing them, then I'll have it delete the extra files created during the process when it's done. (This part is already ready but I just haven't uploaded it. The removing the files before replacing them, I haven't done so, yet. Although this might not really be needed. Only the cleaning after part.)
...Maybe I don't know what you're talking about. lol
Explain it to me.
AssassinsLament said:
Great tool ivanmmj.... I have a few questions. I guess I don't fully understand the process.
I've been able to get the XIP folder, os.nb.payload and romhdr.bin files from a KAISER rom... plus I used the .VM and WinCENLS_WWE folders from a working HERMES rom, but I can't seem to get past the second boot screen. A question I had is... do we use the os.nb.payload and romhdr.bin we got from the KAISER? or do we use those from a working hermes rom? and the XIP directory, do we need to change anything in there? or is just extracting it out, enough to work?
Thanks in advance.
Click to expand...
Click to collapse
You need the XIP folder, os.nb.payload and romhdr.bin of YOUR device and the xip.bin and SYS folder of the rom you want to port INTO your device. Which device do you have? Tell me and I'll "draw" a map of what goes where.
xvx45 said:
I think I'll test later cause actually I'm in exam but I think it work, I'm on the same device as l3v5y so I'll make my test and maybe take to you Artemis files (my other phone)
Thank for your hard work
Click to expand...
Click to collapse
That would be more than welcomed especially since I'm gonna use my Herald cooking class and modify it to teach Artemis users, also.
ai6908 said:
Awesome tool, looks like a dummy can me even port ROM's will try it out sometime. Thanks bunches!
Click to expand...
Click to collapse
My hope is that it will allow just about anyone to port a ROM. ^_^
ivanmmj said:
You need the XIP folder, os.nb.payload and romhdr.bin of YOUR device and the xip.bin and SYS folder of the rom you want to port INTO your device. Which device do you have? Tell me and I'll "draw" a map of what goes where.
Click to expand...
Click to collapse
Thanks for replying ivanmmj... I have a hermes, and I've been doing exactly that... my problem is when I go to build it, I get "An unhandled win32 exception occurred in buildxip.exe [2276]"
If I put in my older XIP build, buildxip works fine... so I'm lost now. Oh, and I'm trying to port the 19213 official att kaiser rom XIP.
AssassinsLament said:
Thanks for replying ivanmmj... I have a hermes, and I've been doing exactly that... my problem is when I go to build it, I get "An unhandled win32 exception occurred in buildxip.exe [2276]"
If I put in my older XIP build, buildxip works fine... so I'm lost now. Oh, and I'm trying to port the 19213 official att kaiser rom XIP.
Click to expand...
Click to collapse
You'll need:
OEM: hermes
ROM folder: Hermes (uncluding the XIP folder and all the other files)
SYS folder from kaiser (look for and remove MSkernel from this folder... I'm not 100% on that folder yet and future versions may handle that folder automatically)
Place the xip.bin from the kaiser into the prepare folder.
Now run the RunMe
ivanmmj said:
You'll need:
OEM: hermes
ROM folder: Hermes (uncluding the XIP folder and all the other files)
SYS folder from kaiser (look for and remove MSkernel from this folder... I'm not 100% on that folder yet and future versions may handle that folder automatically)
Place the xip.bin from the kaiser into the prepare folder.
Now run the RunMe
Click to expand...
Click to collapse
I really appreciate your help ivanmmj, same thing again. It chokes up on BuildXIP.exe ...I have BuildXIP version 0.53 if that makes any difference. I tried with two XIP versions... 19209 and 19900. I'm about to give up.
Oh and I have Visual Studio 2008 installed, so I don't think it would be the runtimes... would it?
AssassinsLament said:
I really appreciate your help ivanmmj, same thing again. It chokes up on BuildXIP.exe ...I have BuildXIP version 0.53 if that makes any difference. I tried with two XIP versions... 19209 and 19900. I'm about to give up.
Oh and I have Visual Studio 2008 installed, so I don't think it would be the runtimes... would it?
Click to expand...
Click to collapse
It might be.... I'll have to do some research...
Ok, I even installed the vs2008 runtimes, same thing.. I found buildxip v.54, same thing... then i moved the whole ROM folder (new XIP) out and put in the old 19209 one and it ran... so maybe there's something wrong with 19213 with hermes? ok, I give up. Thanks for your help!!
19213 porting to elfin
i'm trying to port the 19213 to my elfin, and after porting when i use bepe's kitchen, it gets stuck at this screenshot. anybody help!!!
I finally found a way to overcome space issue that cause BuildIMGFS throw error when you put too many files in the ROM using captaintrip's kitchen
The repack used imgfsfromdump instead of buildimgfs which avoid the size issue and in additon can reduce the final size of flash.dio
The usage are the same with captaintrip's kitchen, I only rename the bat to "iPAQ61x_91x flex kitchen" since this works for both 61x and 91x
You will need to rename flash.dio to TEMPLATE.ROM and put it under ROM folder, when you run iPAQ61x_91x flex kitchen.bat it will also prompt you,follow instruction
keep in mind if you use flex kitchen to build your rom won't be able to extract it properly, anyone want to edit your room will need your kitchen instead. If you don't have buildimgfs issue you may want to stick with the old way of building rom
use iPAQ614c Rom Kitchen.bat if you want to build your rom in old way
Updated July 7th: attached new cecompr_nt.dll that fixed memory leak, necessary for LZX compression, replace the one under TOOLS folder
Download (v0.3):
mediafire
Updated: Dec 9th ,09
v4 Beta:
-improve ability to decompose ROM, however the packages in SYS and OEM portion is usually mix up so you have to manually move them to correct folder after extraction
Download:
21501 kitchen
21215 kitchen
Rom folder for w version for 21215 (Rename it to ROM if you want to build w version)
21232 kitchen
21234 kitchen
21725 kitchen - removed due to too many issue, use 21728 kitchen instead
21728 WWE Kitchen
21728 ITA Kitchen
21728 GER Kitchen
21728 FRA Kitchen
21812 WWE Kitchen
21815 WWE Kitchen
23001 WWE Kitchen
23001 CHT Kitchen
23004 WWE Kitchen
21921 WWE Kitchen
23009 Hybrid WWE Kitchen
23016 18.1 WWE Kitchen
21854 WWE Kitchen
23047 WWE Kitchen
23052 WWE Kitchen
21867 WWE Manila 24M2 Kitchen
21869 WWE Kitchen
21869 WWE Manila 25M Kitchen
23088 WWE Kitchen
28002 WWE Kitchen
28011 WWE Kitchen Beta 29
28011 WWE Beta 29_2 Kitchen - kitchen of Beta 29.2
note: you can replace WinCENLS_Lang_0404 with WinNLS_WWE (from other rom kitchen) to save ROM space
-arcsoft streaming player & codec can be removed if you don't need them
23515 xip (use with 23518 SYS)
23518 CHT Kitchen (LZX)
23518 WWE kitchen
21888 WWE Kitchen
23529 WWE Kitchen
28230 WWE Kitchen
23544 WWE Kitchen
23563 WWE Kitchen
91x 28011 WWE Kitchen -not tested since i don't own 91x device so use as your own risk, use dnw in the worst case
91x 23518(23515)/21888 untested xip
Official WM 6.5 Tookit/SDK/Emulator: here
FCC Information for 610c
FCC information for 910c
----------------------------------
Structure Overview
XIP is the kernel, this is also what you see those 2xxxx build mean, the whole term is called "Execute in Place", i.e execute files in rom directly without copying to ram, this is for boot process, anything wrong mean you will stuck in clean boot
OEM is for device/manufacturer specific program/drivers
SYS is for Windows Mobile system files
A package is a folder with at least a dsm file,all other files are extra
-rgu file is just reg file which you can use notepad to edit
-default all files goto Windows directory (obviously exclude rgu file)
-initflashfiles.dat/txt is a text file with instruction to move files to different directory
Files vs Modules
Modules are folder with ".dll" in their names. Inside the folder there is imageinfo.bin, S00X where x is a digit. When they are cooked into ROM they will become dll with proper relocation (done by WMReloc/G'Reloc). Supposedly being modules would make them load faster(because no need to relocate at runtime?) and some dlls must be in modules or else some program will not work properly. However there are also cases that modules must be converted to files.
Technically you can put everything in SYS since at the end buildOS will merge everything together but it is easier to manage if you follow the OEM/SYS structure
Common Issues TroubleShooting
hang on 1st boot screen (HP Logo)
-XIP porting issue, .rom , .vm file not correct .etc
hang on 2nd boot screen (WM splash screen)
-module did not relocate properly (did you run WMReloc or GReloc?)
-XIP (lower possibility, i don't think it affect..just in case you should keep in mind)
hang/crash on today screen
-software conflict/missing .etc , check your SYS/OEM files
Endless HP update/customization engine
-happens because of different model uses different customization engine, using one from other model/region will cause it to rerun every boot time, the only solution seem to prevent it to run from start by removing it from initflashfiles.dat. Convert all the fix into packages and integrate to the rom instead
installed SIP(virtual keyboard) cannot be switched
-use recmod (under tools folder) to convert all modules into files in browsingie folder
cannot compose new sms/email .etc
-replace redist_lang_[lang_code] folder with one that worked before
wifi cannot turn off after boot
-set HKLM/Comm/SDIO86861/Wireless to 1
XIP
To insert ported xip, run this command: osnbtool -c TEMPLATE.ROM 1 xip_out.bin
where xip_out.bin is your new XIP file
xip porting tutorial can be found all over the place in xda/ppcgeek .etc
Also make sure in ROM folder, the boot.rgu is from your device xip (the kitchen I provided only contains 61x xip so to cook for 91x you need to put 91x boot.rgu instead)
Phone Radio
rilgsm.dll is needed but usually it is in OEM folder
PagePool
Overview: xda wiki
edit using pagepool_by_wlodixon under flash folder, copy your flash.dio and run the appropriate cmd
The only exception is if the rom set pagepool to 0 (Dynamic PagePool), it won't able to recognize and you have to hex edit
hex edit the xip.bin at 0x000A75E4, change all 4 bytes to your desired value (all 0 for dynamic pagepool)
Convert cab to OEM
get package creator here
use it to open cab, then wince cab analyzer opened, choose extract folder icon, after close wince cab analyzer, you will be present with shortcut screen, do you things and hit done, finally hit complete package unless you want to change some option
Create simple cab for file/reg changes
get QuickCab
Xt9
corresponding lang files in OEMApp/OEMLang_#### where #### is the 4 digits lang ID
-[2letter langs code]hpd.ldb
-[2letter langs code]lbUN_xt9s/lsUn/.etc].kdb
-et9.SQR.[Language].bmp [Optional, some language like Polish/Portuguese just point to english bmp in registry]
-[a bunch of number/digit known as GUID].rgu (if you open it up you will find there is registry on xt9)
also under OEM\OEM_Lang_[Lang number]
-initflashfiles.dat (actually you can use notepad to open it and seacrh for ldb/kbd/bmp to see which lang files )
cooking different language
-you will need your language OEM folders from original HP rom
-your language wince.nls
-replace all language mui (e.g 0409=English) with your language mui
-some languages may added extra folders, be sure to copy them into SYS too
-sometime the hp customization/update will end up endless run in every start, in this case you will need to prevent it from running and integrate all updates into the ROM
OptionXML Addon
I have written this small .Net 3.5 App to generate option.xml for SYS packages which will allow you to select the common package and different language more easily without moving folders all the time, just unzip the zip to kitchen which will overwrite the existing batch file and put the exe under TOOLS folder.
To select/UnSelect a category in BuildOS, you can click on the Category group (e.g click on 0409 will select all 0409 packages in SYS), then click on one of the packages will select/unselect the whole group
Reserved for extra space in case
-------------Step by Step guide for xip porting-----------------------
Make sure you read this tutorial first
1. copy(either get it from kitchen or dump it using osnbtool) the existing xip_out.bin and rename it to xip.bin, open xipport, click dump xip.bin and you will get a OUT folder
2. choose write map then make packages , now rename this out folder to some other name
3. dump the new xip(from other device) using osnbtool, rename it to xip.bin & do the same as step 2 with xipport
4. now copy MSXIPKernel & MSXIPKernelLTK under Modules and Files folders from OUT folder(from step3) and overwrite to corresponding 61x OUT folder(from step1)
4.5 as said in the xda tutorial, remove hd.dll, osaxst0.dll folders and their corresponding text files under modules to avoid physical address overlap
5. use xipport to undo and then realloc and write maps. Then you check map files to make sure there is no !!!(memory address overlap) I recommend using XIP address tools to check for overlap, sometime you will get error when you realloc (key already exist .etc), use xip address tool and set work folder to OUT then you will see error on first dll addr which you have to fix all highlighted red cell(overlapped address). Note that to fix first dll addr address you have to highlight the cell, enter the new start address on the V address cell in bottom, click modify, then use mouse to highlight the 1A cell above, and change the D address cell to the same as V then click modify button(on the right of V cell). You should see the change in table then. For virtual base overlap you only need to modify V cell only
Note: first dll addr overlap will result error when you click realloc in xipport.
The goal is have no overlap as shown in MAP.txt. When there is no more overlap, use xipport to build xip_out.bin and then insert the xip into the dio file using osnbtool
Commands:
extract xip: osnbtool -d flash.dio 1 xip.bin
insert xip: osnbtool -c flash.dio 1 xip.bin
also make sure your ROM\boot.rgu is from your device xip
-----------------------------------
IPAQ 91x boot keys:
Clean bOOt - Voice Commander + OK + Reset
Download Image - Volume Down + OK + Reset
Calc Checksum - Volume Up + OK + Reset - disconnected, SD card out
RUU - Volume Up + OK + Reset - UsbConnected, SDcard out
SDloader - Volume Up + OK + Reset - USB disconnected,SDcard in SDloader
Modem_CAL - Voice COmmander + Volume Up + Reset
Diagnostics - Voice Commander + Volume Down + Reset
-------------------------------------
LZX Compression:
The default compression algorithm for ROM is XPR, if you must include lots of files that causes your resulting rom >80mb under XPR(81920kb - ROM Size limit for 61x, bigger than this the device won't boot), you need to use LZX compression. It reduces rom size by ~13% but with ~1-3% performance hit(from other post I read, I never verify the performance hit).
To use LZX compression, you need to replace the cecompr.dll folder in XIP Modules with the one attached in this post. Re-port the xip (realloc + write map + build xip_out.bin) and then use osnbtool to inject the xip inot TEMPLATE.ROM.
Then hex edit the imgfs_raw_data.bin in the rom kitchen, replace the first string "XPR" without quote you found with "LZX" without quote.
Make sure you have replace the cecompr_nt.dll under tools folder of the kitchen with the one I attached in 1st post to avoid memory leak
Now just build normally, you will notice the time to inject file will take much longer because of the compression
Is there any ROM kitchen tools for hp iPAQ h6365 WM2003?
Wow great kitchen. Thanks for sharing.
here, here! keyx you da man
One thing though - when you say this:
Phone Radio
if you are using SYS from other device, make sure you replace ril.dll and phone.dll from a working rom in phoneRedist or you will get a phone radio not installed which disable phone function
rilgsm.dll is also needed but usually it is in OEM folder
Click to expand...
Click to collapse
I'm not sure that is actually correct. I've been using ril.dll and phone.dll from all kinds of donor SYS; these are OS files that should be generic. It is only rilgsm.dll that is manufacturer-specific.
you are right, I corrected the post
I think I do anything wrong...
If I extract your ROM(WM 6.5 Beta 3.81) and put it together to a ROM again, it is 10MB smaller.....After extracting this, its 1MB smaller...
Question is, why?
Greets
chucknican
actually for unknown reason if you use my kitchen to build rom, you won't able to extract it properly...i am not sure why. But currently it is the only solution for me to overcome buildimgfs error
so the solution is that I use captaintrip's kitchen to extract and yours to build it together again?
I can't get this kitchen to build my ROM. The after WMReloc does the modules rebase, I get the following feedback...
Code:
Injecting files ...
Input file imgfs_raw_data.bin cannot be opened. Exiting.
In fact, when I watch the temp folder during this process, I see no imgfs_raw_data.bin at all. In your new script, I can't see where this file would come from anyway.
Help?
chucknican said:
so the solution is that I use captaintrip's kitchen to extract and yours to build it together again?
Click to expand...
Click to collapse
no in fact i will need to upload a kitchen as the result rom using my flex kitchen will not be extracted properly
benjaminries said:
I can't get this kitchen to build my ROM. The after WMReloc does the modules rebase, I get the following feedback...
Code:
Injecting files ...
Input file imgfs_raw_data.bin cannot be opened. Exiting.
In fact, when I watch the temp folder during this process, I see no imgfs_raw_data.bin at all. In your new script, I can't see where this file would come from anyway.
Help?
Click to expand...
Click to collapse
you have to run "prepare_imgfs flash.dio -nosplit" to get the imgfs_raw_data.bin first, this process is done when you extract a rom before but if you just directly use it to build a rom you need to manually run the command on a flash.dio first
Also keep in mind if you use flex kitchen your rom won't be able to extract properly, anyone want to edit your room will need your kitchen instead. If you don't have buildimgfs issue you may want to stick with the old way of building rom
keyx said:
no in fact i will need to upload a kitchen as the result rom using my flex kitchen will not be extracted properly
you have to run "prepare_imgfs flash.dio -nosplit" to get the imgfs_raw_data.bin first, this process is done when you extract a rom before but if you just directly use it to build a rom you need to manually run the command on a flash.dio first
Also keep in mind if you use flex kitchen your rom won't be able to extract properly, anyone want to edit your room will need your kitchen instead. If you don't have buildimgfs issue you may want to stick with the old way of building rom
Click to expand...
Click to collapse
So... these files go in the root folder? That's what works for me anyway. Hmm... I think this could be easily added to the script, if you ever have to release an update to the kitchen. Anyway, thanks.
21501 kitchen added on 1st post
EDITED: kitchen updated to detect missing of imgfs_raw_data.bin and extract it automatically, I also updated some tools versions
ADC and Ipaq Data Connect
Are both of these necessary? When both are installed the ADC seems to run first and configures a "Proxy Internet" Profile in the Connection Manager which lists all 3 possible connections for my data carrier, even though I can only use the internet2.voicestream.com with T-Mobile. Maybe I am not using this correctly, but once I removed the ADC, the ipaq data connection worked fine and I was able to connect to the internet without a problem. Is this all this app does, or is there another usage that I should leave it installed for?
Thank-you
you can remove ADC if you don't want it, i think it just help to setup data connections
Customization
Keyz
I have removed some of the OEMs from the kitchen, but am not sure that I modified the initflashfile.dat correctly,will you look at it for me and see (I highlighted what I have removed)? If I remove the entire last 3 lines that contain the Utility file the device does not reboot from sdlauncher when installing. When I leave the last line in it is very speedy to install and reboot, but I have the empty utility Folder in my programs folder! I also had tried to add the BSPropCab.cab to the OEM folder but cannot get it to install correctly. I saw that you had it installed in one of your previous roms along with the other 2 arc cabs. The arc cabs I can get to work, but I really dont want to put them in, just the bsprop. Is this possible?
In OEM I added Coreplayer, PdaNet, SKTools5, Live Search, Google Search and WM5torage1.9. I had to add Google Search in here because I could not get it to work by adding the original files back into the OEM App folder: In Systems I removed ADC, VOIP and One Note, replaced NETCF with NETCF3.5, and added Transcriber back in. I thought about removing WMWidgets, I use all SPB Software, but I dont understand all of its functions, I have Googled it and there really isnt alot out there about it. What I did find though makes me think Microsoft will add more function to it once the official 6.5 is officially released-So I will keep that. For me this is a very good ROM, you have done an excellent job with modifying the kitchen.
Thank-you
Sunday
Where do you test the new roms? In the device or in somekind of emulator?
gkleding said:
Keyz
I have removed some of the OEMs from the kitchen, but am not sure that I modified the initflashfile.dat correctly,will you look at it for me and see (I highlighted what I have removed)? If I remove the entire last 3 lines that contain the Utility file the device does not reboot from sdlauncher when installing. When I leave the last line in it is very speedy to install and reboot, but I have the empty utility Folder in my programs folder! I also had tried to add the BSPropCab.cab to the OEM folder but cannot get it to install correctly. I saw that you had it installed in one of your previous roms along with the other 2 arc cabs. The arc cabs I can get to work, but I really dont want to put them in, just the bsprop. Is this possible?
In OEM I added Coreplayer, PdaNet, SKTools5, Live Search, Google Search and WM5torage1.9. I had to add Google Search in here because I could not get it to work by adding the original files back into the OEM App folder: In Systems I removed ADC, VOIP and One Note, replaced NETCF with NETCF3.5, and added Transcriber back in. I thought about removing WMWidgets, I use all SPB Software, but I dont understand all of its functions, I have Googled it and there really isnt alot out there about it. What I did find though makes me think Microsoft will add more function to it once the official 6.5 is officially released-So I will keep that. For me this is a very good ROM, you have done an excellent job with modifying the kitchen.
Thank-you
Sunday
Click to expand...
Click to collapse
what do you mean by bsprop not installed correctly? if you convert it to OEM folder correctly it should work but if you leave the customization engine run on startup there is no point to preinstall bsprop since it will reinstall again from ipaq file store(unless you did not install the update before).
Also if you modify initflashfiles.dat i believe you should use hex editor to remove the FF FE header added by notepad.
Sometime when you flash a lot the device will act weird & does not reboot from flashing, you can try to clean boot it or reflash. I think you can remove all highlighted entries without issue. You may need to leave a blank line at the end of file though.
wmwidget is a widget engine that can run apps that use pie as a container/interface, for me it looks kinda like a shortcut to a webpage, msn weather/money .etc are the sample widget come with 6.5 for now. You can remove it if you don't use it.
SwimmerBoy said:
Where do you test the new roms? In the device or in somekind of emulator?
Click to expand...
Click to collapse
device only until i figure out the emulator issue
Hello there, im trying to make a 6.1 rom with ESP lang but i can't port the one posted by Da_G be cause the rom maker cab sends me problems with some files.
I hope some of you can help me with the lang porting or any pack I can use.
I'm using Old style kitchen made by aeroflyluby
Since you are speaking about WM 6.1 i suppose that you got the right build from the right Da_G thread....anyway ,here is the link:
http://forum.xda-developers.com/showthread.php?t=547314
Actually I'm using that package that you mentioned but no luck, when i change the files from the SYS folder the program "my build os" sends me an error anywhere and if y solve it (by deleting the problematic file) the rom maker (the .cab that calls the pack of tools) sends me an error while is rebuilding the files so I dont know what I'm doing wrong.
Do I have to use the SYS files with or without the 0409(ENG) files or i have to replace them?
Is there any proble if I cant find any 0C0A(ESP) OEM folder files?
I hope you can help me.
Regards.
If you are cooking for 0c0a then every 0409 folders must be left from your kitchen.
With 0c0a SYS you need 0c0a OEM at least OEM_Lang_0c0a otherwise your rom will not work.
Lokmetro said:
Actually I'm using that package that you mentioned but no luck, when i change the files from the SYS folder the program "my build os" sends me an error anywhere and if y solve it (by deleting the problematic file) the rom maker (the .cab that calls the pack of tools) sends me an error while is rebuilding the files so I dont know what I'm doing wrong.
Do I have to use the SYS files with or without the 0409(ENG) files or i have to replace them?
Is there any proble if I cant find any 0C0A(ESP) OEM folder files?
I hope you can help me.
Regards.
Click to expand...
Click to collapse
Oh i see. So i can extract 0c0a OEM files from any 6.0 dump folder? or I have to find a new oem folder files for 6.1?
BTW i'm cooking for a BenQ-e72 so I can't find any rom in spanish except for the one that came with my phone (WinMo 6.0)
a_GWM 6.0 OEM should be work with WM 6.1 at least you will need a WM 6.1 Initflashfile.dat (it is in OEM_Lang), sometimes Da_G shares his build within the Initflashfiles for every language,check in that thread to see otherwise try to cook it with your 6.0 initflashfile.dat and check if something is missing in StartMenu.
Lokmetro said:
Oh i see. So i can extract 0c0a OEM files from any 6.0 dump folder? or I have to find a new oem folder files for 6.1?
BTW i'm cooking for a BenQ-e72 so I can't find any rom in spanish except for the one that came with my phone (WinMo 6.0)
Click to expand...
Click to collapse
Thanks for the fast answer. I'm going to look for the WM from Da_G but I don't remember if i have seen that thread before, and btw I will take some time after I can post any advance be cause I'm not at home. for now I can only ask things if I have any question.
I have tried what you said but no luck. the phone wont start. it just stay in black screen, i don't know what i'm doing wrong
can you xplain exactly where does your rom stucks? maybe is not a SYS trouble maybe is a XIP trouble due to not pòrting ok or maybe is the wince. nls WWE or any SYS pkg missed
Well the rom wont give me any image, it just shows me a black screen and the normal screen lights for the rest it does nothing.
Once i got lucky but I had problems with the Start menu be cause i wasn't able to see the icons, i think it was caused by the initflashfiles.dat but now I can't do it again
Welcome to my tutorial in cooking for the TG01.
I shall no longer be updating this thread, so please feel free to post and make any contribution you see fit.
This is meant to be a very simple, plain English guide to cooking.
With this in mind i will not be showing you how to port a new sys/xip or any of the more advanced features like sense
lets just see if we can dump, modify, build then flash a working, booting ROM for now.
This tutorial is only what i have learnt whilst beginning to cook my own ROM, so if you find a mistake or have something to offer feel free to post
If you have a question that your going to post, please please search the forum first, i learnt a lot of what i know from threads that have nothing to do with the TG01 or even the type of kitchen we're using. So as the rules state - Search before posting, Thank you.
Modifying the ROM of a Windows Mobile is dangerous to your devices health. If you mess it up it can be fatal.
The information contained in this tutorial is only as far as i am aware. Don't blame me if you brick it.
Having said that, i have never had a problem the short pin method couldn't fix.
You will need the attached .zip file, it contains the kitchen and associated applications.
In this tutorial i am using L3V5Ys kitchen, cab converter by Jason8, Package converter by Total Fire and Package Creator by Ervius.
So thanks to them and everyone in the XDA community for making this kind of thing possible.
1. Dump a ROM
1.1. Download the ROM you wish to modify. I suggest Miros miROM4, its clean and fast without any clutter.
1.2. Extract the ROM and place the resulting .tsw file in the BASE folder in the kitchen. Then rename it "TG01WP_5005000176.tsw"
1.3. Run dump.bat and wait for it to finish, this could take a little time depending on you PC, it may be worth making a tea as it seems to take longer if you watch it.
1.4. You should now have some new folders in your kitchen, for now the only one were interested in is SYS.
2. Modify a ROM (Removal of packages)
2.1 Open your kitchen folder then open the SYS folder,
2.2 You should now be faced with a window with lots of folders in it. The folders are called packages.
2.3 Delete the package Entertainment and its associated packages (Entertainment, Entertainment_DPI_192, Entertainment_Lang_0409 and Entertainment_Lang_0409_DPI_192)
2.4 This has effectively deleted the games that ship with your chosen ROM,
2. Modify a ROM (Adding packages)
2.1 Open your kitchen folder then open the SYS folder.
2.2 Copy the package from its source to the SYS folder. Remember that for this kitchen it must be an OEM\old type package (see post #4)
2.3 Thats it, you added software to your custom ROM.
2. Modify a ROM (modify existing package)
2.1 Open your kitchen folder then open the SYS folder.
2.2 Open the folder titled "Redist_dpi_192_resh_480_resv_800"
2.3 Replace welcomehead.192.png with the one in the downloaded zip.
2.4 That's it, when you boot your new ROM it should show the new welcome screen.
3. Building and flashing a ROM
3.1 Run "2. build no XIP port_no auto.bat" (this is the original build.bat, modified by myself to skip the port xip and BuildOS/auto parts)
3.2 When the cmd prompt opens press any key
3.3 When BuildOS opens check the packages you wish to install then click the green arrow in the top left.
3.4 When BuildOS has finished, close it and the cmd window will carry on opening and closing other programs as it goes. You do not need to touch any thing till it has finished and it asks you to hit enter.
3.5 Assuming you pressed enter when it asked, the cmd window will have now closed.
3.6 Go into your kitchen folder and you should have a new file called "TG01WP_00.tsw" This is your ROM.
3.7 Copy "TG01WP_00.tsw" to a folder called PRG on your storage card (if its not there then create it) and then run SDDL+ or use the short pin method to flash it.
3.8 That should be it, you should now have the rom you started with but minus solitaire.
The Kitchen:
In your "Kitchen" you will find some folders and some files. They all relate to either the ROM ityself,
or the tools used to edit/dump/create the ROM.
BASE - This is the folder in which you put the rom you are dumping
OEM - This is the folder where the Toshiba part of the ROM would be if it was an official Rom that was being dumped,
however when dumping a cooked ROM this folder will be empty as a cooked ROM cannot be dumped correctly by the tools available
and all packages are put in the SYS folder. This will not affect the output, and the OEM packages can be left in the sys folder.
If you dump a cooked ROM you will need to create the OEM folder as BuildOS panics without it, even if its empty it needs to be there.
SYS - This folder contains the dumped ROM separated into packages
ROM - This folder contains the xip, boot.rgu and boot.hv. For this tutorial we won't be working with anything here.
TOOLS - This is where the exe's are that make up the kitchen, you don't need to touch these, the .bat files do it all for you.
Temp - This is the kitchens working folder, you don't need to go here unless there are problems building the ROM but that is beyond the scope of this tutorial.
Packages: (there are 2 types, EXT and OEM, our kitchen can only handle OEM so thats what i'll be discusing)
Each package contains an element of the ROM. For example the BROWSING package contains the parts of the ROM required for internet browsing.
For a package to be usable it requires certain things
Required:
.dsm file - This is to complicated for the scope of this tut so for now just accept that this file is necessary and should never be deleted. All dsms must have a unique name.
That is all a package needs to be a package, though without any files in it won't actually do anything.
Optional:
.rgu file - This file contains the reg entries for the package in question and its name will be the same as the .dsm file in your package.
initflashfiles.txt / initflashfiles.dat - This file tells the PPC where to put the files that are within the package, ie. a short cut to a program in the start menu.
NOTE without an initflashfiles.txt all items within the package will go to the Windows folder.
option.xml - Holds information relevant to the package
The files you wish to install, without them its pretty pointless.
Packages often have other packages associated to them, for example the Entertainment package also has Entertainment_DPI192, Entertainment_Lang_0409 and Entertainment_Lang_0409_DPI_192.
Where Entertainment is the package, Entertainment_DPI_192 has the files specifically for our screen size, Entertainment_Lang_0409 has the files for our language (0409 is WWE)
and Entertainment_Lang_0409_DPI_192 has files that are for our lang and our screen size.
Modifying a .rgu file:
.rgu files contain registry information for the package they are in. If you wish to modify this data then you can do so with notepad, though i recommend downloading Notepad2. If you open a .rgu file and don't understand what's in it then you need to go learn about windows registry editing first. I am assuming that if you are looking at building a custom ROM you already know about reg editing.
CAB Converter:
This program is used to convert a .cab file into a package to be cooked into a ROM
1.Open CAB_Converter.exe
2.Click "add a cab" and browse to your cab or drag and drop your cab into the window
3.Click on the text representing your cab at the top of the window so its selected.
4.Click CAB->OEM, and wait till its finished. Should only be a few seconds.
5.Your package will be in the CAB Converter folder in the converted OEM folder
Package Converter:
Our kitchen only supports OEM\Old type packages, so what if we want to use an EXT\Visual type package? Well Total Fire kindly made and distributed a tool that converts from one to another.
The program is fairly self explanatory but i'll quickly cover converting from a visual to an old package.
1.Open the converter, then click "select" where the greyed text say package,
2.Browse to and open your visual package.
3.click "Convert VTO", now wait till you see "Conversion Complete".
4.Your now usable package will be in the same directory as the visual package with the text "PACKAGE TF" added to the title.
Package Builder:
If you wish to create your own packages, this is the tool to do it.
1.Create a folder named whatever you want your package to be named
2.Add to it the files you want
3.Add to it a .reg file if required
4.Open package Creator, in the bottom right you can choose ITA or ENG.
5.Click open package and browse to the folder you created.
6.Now the initflashes.txt options page appears, here you can select the .exes in your package and choose where to create short cuts. You will need to click apply on each one.
7.Now click complete package.
8.The creator will now create a .dsm file, a .rgu file with your .reg file settings in, an initflases.txt file and an option.xml file within the folder turning it into a package.
9.This package can now be used in your kitchen.
Reserved...
Reserved....
leeston2379 said:
CAB Converter:
This program is used to convert a .cab file into a package to be cooked into a ROM
1.Open CAB_Converter.exe
2.Click "add a cab" and browse to your cab or drag and drop your cab into the window
3.Click on the text representing your cab at the top of the window so its selected.
4.Click CAB->OEM, and wait till its finished. Should only be a few seconds.
5.Your package will be in the CAB Converter folder in the converted OEM folder
Click to expand...
Click to collapse
Thanks for a lovely tutorial! Makes sense!
I am continuously facing this attached error! Any ideas how to solve this! :s
Wich cab do you use ?
What is your Operating System ?
EVEALEX62 said:
Wich cab do you use ?
What is your Operating System ?
Click to expand...
Click to collapse
I used Opera.cab (opera 10) and with windows 7
EVEALEX62 said:
Wich cab do you use ?
What is your Operating System ?
Click to expand...
Click to collapse
chek property of your folder in c: or test to reinstall this program with administrator right (clic right).
Can you send me MP with your cab, I'll test tomorow morning
Have a good night
drupad2drupad said:
Thanks for a lovely tutorial! Makes sense!
I am continuously facing this attached error! Any ideas how to solve this! :s
Click to expand...
Click to collapse
Its better to grab hold of one of the existing opera packages on the forum, I never successfully converted it to a working package. Just seemed to be the opera cab as i have no problems with any other. I think ninjaduck does a nice version with flash and the like already in.
I never saw that particular error myself though. Sorry I can't be more help.
So long and thanks for all the fish.
I will no longer be updating this or any of my ROM threads as its upgrade time and I've got a shiny new Desire HD, my trusty TG01 has been retired and i'm off to have a bodge with Android.
The TG01 forum is a nice little place with only a hand full of regular contributors/posters but its always friendly and development seems to move along at a steady pace, so thanks to all its members for that.
To those who PM me, feel free to continue as i will still be around here somewhere and will help in anyway i can.
See you later.
leeston2379 said:
I will no longer be updating this or any of my ROM threads as its upgrade time and I've got a shiny new Desire HD, my trusty TG01 has been retired and i'm off to have a bodge with Android.
The TG01 forum is a nice little place with only a hand full of regular contributors/posters but its always friendly and development seems to move along at a steady pace, so thanks to all its members for that.
To those who PM me, feel free to continue as i will still be around here somewhere and will help in anyway i can.
See you later.
Click to expand...
Click to collapse
i have one samsung galaxy tab and next week i get also one HTC Desire HD of my company. Android is really good- but more fun i have with WinMo.
today i have get my second "new" tg01!
you were ever friendly and helpful. thank you for your activity and cooking for our tg01 community.
i wish you all best, good luck and cheers, miro
leeston2379 said:
I will no longer be updating this or any of my ROM threads as its upgrade time and I've got a shiny new Desire HD, my trusty TG01 has been retired and i'm off to have a bodge with Android.
The TG01 forum is a nice little place with only a hand full of regular contributors/posters but its always friendly and development seems to move along at a steady pace, so thanks to all its members for that.
To those who PM me, feel free to continue as i will still be around here somewhere and will help in anyway i can.
See you later.
Click to expand...
Click to collapse
Hi Lee!
TG01 community will miss your contributions! In case your retired TG01 lures you back to development, I will keep my eyes peeled. I hope you like your new android, but in case, Winmo is missed (I wish!), do come back!
Hi.
Leeston2379 will not be doing any changes here any more so I allow myself to upload my version of his kitchen here without creating new thread.
What has been changed ?
"Virgin" kitchen was only for packages modification without any pagepool changes or xip porting. Leeston2379 was basing on l3v5y kitchen which have certain bug. Interestingly this bug was "not active" as far as old ( original ) xip.bin was taken in .tsw file creation.
There are 4 batch files for new system building:
a) 2. build_without_xip_port.bat - the same as original leeston2379 batch but with fixed bug although here it is not "active"
b) 2. build_without_xip_port_pagepool_set.bat - allows to set pagepool size
c) 2. build_with_xip_port.bat - like original but allows to port new xip
d) 2. build_with_xip_port_pagepool_set.bat - like original but allows to set pagepool size and port new xip
I did not utilize automatic execution via for example
AutoExecAndClick.exe /launch "xipport.exe" /clickbutton "dump xip.bin" /clickbutton "write maps" /clickbutton "make pkgs" /kill
In my oppinion it is buggy . There are any timing races or something other causing any strange errors from time to time. User has to like in original l3v5y kitchen press different buttons in xipport software.
Thanks Mangasora for his post concerning porting xip
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Hi.
Leeston2379 will not be doing any changes here any more so I allow myself to upload my version of his kitchen here without creating new thread.
What has been changed ?
"Virgin" kitchen was only for packages modification without any pagepool changes or xip porting. Leeston2379 was basing on l3v5y kitchen which have certain bug. Interestingly this bug was "not active" as far as old ( original ) xip.bin was taken in .tsw file creation.
There are 4 batch files for new system building:
a) 2. build_without_xip_port.bat - the same as original leeston2379 batch but with fixed bug although here it is not "active"
b) 2. build_without_xip_port_pagepool_set.bat - allows to set pagepool size
c) 2. build_with_xip_port.bat - like original but allows to port new xip
d) 2. build_with_xip_port_pagepool_set.bat - like original but allows to set pagepool size and port new xip
I did not utilize automatic execution via for example
AutoExecAndClick.exe /launch "xipport.exe" /clickbutton "dump xip.bin" /clickbutton "write maps" /clickbutton "make pkgs" /kill
In my oppinion it is buggy . There are any timing races or something other causing any strange errors from time to time. User has to like in original l3v5y kitchen press different buttons in xipport software.
Thanks Mangasora for his post concerning porting xip
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
2. build_without_xip_port_pagepool_set.bat is my mod based
on leestone 2. build_without_xip_port.bat. bug?
please explain a little bit better: what you have do, what changed, the method for xip porting and how works? i hope is testet from you
I have cooked a few roms for my diamond using the HTC WM6.1 1.93 release as a base. But i'd like to try Titanium and I gather i'd need WM6.5.
I have downloaded OEM xip kernel, SYS_23563_192DPI_0409, SYS_23563_Common and SYS_23563_XIP.
Please could someone give me some idea of what to do with these folders.... I use EVK 12.5.8
rikpotts said:
I have cooked a few roms for my diamond using the HTC WM6.1 1.93 release as a base. But i'd like to try Titanium and I gather i'd need WM6.5.
I have downloaded OEM xip kernel, SYS_23563_192DPI_0409, SYS_23563_Common and SYS_23563_XIP.
Please could someone give me some idea of what to do with these folders.... I use EVK 12.5.8
Click to expand...
Click to collapse
first thing is port the SYS (common and DPI 192),unpack this two archives then useing the Packer.jar you will create a new SYS for youre build,next you will need some OEMDrivers(the touch.dll for WM 6.5) and a OEMXIPKernel (the nk.exe for WM 6.5) and last but not least the MSXIPKernel,in ROM/Shared (just create a new folder and copy the content of SYS_23563_XIP.
Thankyou so much for your reply.
I have just built my first wm6.5 rom and will attempt to flash in a minute.
The only thing i'm left slightly confused about is a few bits in the OEM folder.
OEM/DIAMOND/COMMON/OEMVERSION/mxipupdate_OEMVERSION_100.provxml
It reads "ROMVersion" value="1.93.401.2"" Surely I should have a second file for wm6.5?
Also in ROM/DIAMOND there were a load of files in the OEMXIPKernel I downloaded that wanted to overwrite some existing files.... namely info.txt, ROMHdr.bin, xip.bin, os.nb.payload.
I didn't let them overwrite but do I need to keep both sets of files?
rikpotts said:
Thankyou so much for your reply.
I have just built my first wm6.5 rom and will attempt to flash in a minute.
The only thing i'm left slightly confused about is a few bits in the OEM folder.
OEM/DIAMOND/COMMON/OEMVERSION/mxipupdate_OEMVERSION_100.provxml
It reads "ROMVersion" value="1.93.401.2"" Surely I should have a second file for wm6.5?
Also in ROM/DIAMOND there were a load of files in the OEMXIPKernel I downloaded that wanted to overwrite some existing files.... namely info.txt, ROMHdr.bin, xip.bin, os.nb.payload.
I didn't let them overwrite but do I need to keep both sets of files?
Click to expand...
Click to collapse
the part with the rom version, you can modified as you wish ,yo can put you're name in there(PS: dont modify the phones ID or things like that)...then,you don't need the info.txt files anymore,delete them(PS: don't delete them if you are trying to build a new XIP.bin).If it says to overwrite.overwrite them with the new ones.Because the xip.bin,os.nb.payload,and the ROMHdr.bin are the old build files.so you need to replace them with the new ones,but you need to make a backup,just to be shure...or if you dont have the xip.bin and also the os.nb.payload for the new build you have to create the xip.bin with XIPport.exe and then we use again the XIPport app to inplant the new created xip.bin in the OS.nb.payload...that its a little tricky even i can do it properly