My daughter's Shadow screen went blank... but the backlight was still working leading me to believe that something other than the screen had gone bad. When she gave it to me to look at, I noticed the sliding mechanism felt loose and I could hear something within (crackling like from a stuck or damaged ribbon cable). This further lead me to believe that the screen was probably ok. Following some instructions I found on how to disassemble the device, I was able to take apart the phone. What I found was that two of the four screws that hold the sliding mechanism had worked loose and that the spring had broken in the middle. The loose spring then appeared to have torn away at the edge of the ribbon cable that connected the main PCB to the screen. So, what I need now is a replacement spring for the sliding mechanism and a new ribbon cable. Does anyone know where I could get these? I am hoping that I do not need to purchase a whole sliding mechanism and screen but if I do, than I guess I will do that. Any insight appreciated.
This is the only place that i know of that has Shadow parts and it doesn't look like they have the parts you need.
http://cnn.cn/shop/tmobile-shadow-c-277_454.html
WHY??
Whats the point of posting unneccessary information?? He obviously cant use it. You could try Ebay. You could try buying a broken Shadow and using the parts.
http://cgi.ebay.com/T-Mobile-HTC-Shadow-Copper-broken-use-parts-repair_W0QQitemZ280238288102QQihZ018QQcategoryZ3312QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/T-mobile-Shadow-broken-Lcd_W0QQitemZ180255922628QQihZ008QQcategoryZ3312QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
did you buy this shadow directly fromn t-mobile with renewing your contract or with a new contract?
cause if so the shadow would have been covered under warranty, but if you opened it up and tore any warranty stickers then well you're SOL... i can appreciate the fact that you're trying to do it yourself, but warranty replacements through cell phone companies are no joke and easy to do if its not a problem caused by you
This is why.
I did it just to piss you off.
Related
So I bought a new housing for my O2 XDA II Mini, during the removal of the display ribbon I broke the little black part on the display connector which holds the ribbon down, and after hours of trying to get the ribbon back in and secured I have bent the pins in the connector to buggery.
The ribbon appears to be untouched, however the connector which the display ribbon goes into is broken.
Is there anywhere I can get hold of one of these little connectors to replace my broken one, obviously very sensitive soldering will be needed to remove the old one and solder the new one in place.
Alternatively, does anyone know any mobile phone repair shops in Auckland, New Zealand who would be able to help out with my situation?
I fear all i'm going to hear back is "the motherboard needs to be replaced", however I am determined not to go through this route, as I am a poor student and the phone sounds as if it functions fine, makes the beepy noise when first starting up on the setup screen.
I was very careful with the actual screen unit while removing it, and I have had signs of life earlier on in the broken connector episode, however I can no longer get anything showing as I can't fit the cable in.
Cheers for any help.
Anything would be appreciated.
"obviously very sensitive soldering will be needed"
And that only can be done by machines/robots. I don't think humans are even able to sloder those kind of connections...
But, could you post a picture? cause I might have suggestions on how to fix it. One would be to bend back the pins on the tiny slot with a toothpick and when done to tape the flatcable, so it stays there.
I've maybe got a spare creen for you.
g0atNZ said:
So I bought a new housing for my O2 XDA II Mini, during the removal of the display ribbon I broke the little black part on the display connector which holds the ribbon down, and after hours of trying to get the ribbon back in and secured I have bent the pins in the connector to buggery.
The ribbon appears to be untouched, however the connector which the display ribbon goes into is broken.
Is there anywhere I can get hold of one of these little connectors to replace my broken one, obviously very sensitive soldering will be needed to remove the old one and solder the new one in place.
Alternatively, does anyone know any mobile phone repair shops in Auckland, New Zealand who would be able to help out with my situation?
I fear all i'm going to hear back is "the motherboard needs to be replaced", however I am determined not to go through this route, as I am a poor student and the phone sounds as if it functions fine, makes the beepy noise when first starting up on the setup screen.
I was very careful with the actual screen unit while removing it, and I have had signs of life earlier on in the broken connector episode, however I can no longer get anything showing as I can't fit the cable in.
Cheers for any help.
Anything would be appreciated.
Click to expand...
Click to collapse
Hi, I've still got a SPV 500 and a MDA Compact, need to find it if you want you can have my MDA Compact screen.
Just PM if you are interested.
My screen has gone completely white.... I bought the phone online from an "authorized dealer" who won't reply to me now. I live in the US and O2 does not appear to have any US contact info... Am i screwed on this expensive phone i bought 6 months ago?
Anyone had experience with this?
S
stuart.myers said:
My screen has gone completely white.... I bought the phone online from an "authorized dealer" who won't reply to me now. I live in the US and O2 does not appear to have any US contact info... Am i screwed on this expensive phone i bought 6 months ago?
Anyone had experience with this?
S
Click to expand...
Click to collapse
I guess you already tried hard reset?.
Can you get to bootloader mode?.
Tried hard resets, and getting to bootloader mode, i think this is a malfunction with the actual device, I just need to find out how to get in touch with o2 support internationally, i was wondering if someone on here may have had this problem too.
Thanks.
white screen - connector loose?
I too have this problem - but if I twist the screen away from the keyboard I get the display back. I suspect there's a connector loose inside but haven't looked inside.
Anyone on the forum any experience of getting inside and reseating connectors?
xda operation
tophamn said:
I too have this problem - but if I twist the screen away from the keyboard I get the display back. I suspect there's a connector loose inside but haven't looked inside.
Anyone on the forum any experience of getting inside and reseating connectors?
Click to expand...
Click to collapse
Hello there,
I had to get inside my xda to replace the screen that one of my dear rug rats broke. it is quite easy to do, and you only need to get into the screen side of it to get at the conectors. spin the screen half way round and look at the bottom and you will see 6 small screws. take out the two furthest out and two in the middle nearest the screen side. if you take them all out the whole thing becomes hard to handle. the front cover should GENTLY leaver off, and the cables to it exposed. even if they look in place lift the catch holding them in place and take them out and wipe the contacts with a cloth. just be very carefull with the cable strips as they tear very easy. . any problems then PM me
TTFN
Jay
White Screen
Try www.gpsmidlands.co.uk they replaced my ribbon assembly the same day.
Xda Lcd Repair
Try http://www.pda-repairs.co.uk
Brilliant
thanks for this posting - worked perfectly once i had worked out that atually you need to remove the screws further away from the screen in the middle. but otherwise I have successfully resurected a brick into a working universal! thanks!
Sark
Hi, peeps. Would like to ask for your assistance in troubleshooting my old T-Mobile MDA - the one that is also the Xda mini S.
The unit in question is 2nd hand although it was still in good shape when I got it. Used it for over a year already and has seen much use. Once, the insides got wet and I had to dry it out but it was okay after that. Although the keyboard wasn't showing any backlight until I figured out that a blowdryer would help remedy that situation (after careful dismantling).
Recently, the screen when you slide open the keyboard either comes up blank (whole screen is just white) or is discolored and a bit disaligned (the top part is either missing or is at the bottom of the screen). It happens too on the normal layout at times.
I upgraded the firmware with the most recent one I downloaded here last year. No problems experienced though with regards to the OS and not sure if the recent problem can be attributed to it.
Any ideas and suggestions?
I got the same problem on with the screen my Cingular 8125. When I slide the keyboard open, the exact same thing happens to my screen. Sometimes It only used to happen maybe once every 10th time, but as of last, it is happening all the time.
I spoke to someone at a repair store in Toronto and the guys said it will cost close to $100 to replace some wiring in the back. It didn't seem worth it for me so I got another phone instead, but I would love to keep using this phone if this could be replaced.
Hey guys. If you are comfortable, I would suggest dismantling the phone and taking a look at the ribbon connector between the board and the screen. My guess is that it is loose, or damaged. Reseat the ribbon and try again. Otherwise I would see if replacing the screen helped. Certainly much cheaper than a new phone...
Reseating
first of all check out the socket (on board) where the screen coaxial cord is plugged in , r all the connector pins alligned or are any bent / pulled back ?
in that case reset pins location using a tiny neidle or pin, also use a double faced adheisive tape on the back of the screen connector to rest it tight to keyboard (original setup only they use glue).
second check out if the screen does that if was flipped using software , if it was a hardware case and upper solution wouldnt help then check to see if the sliding mechanism (two plastic identical bars screwed by two screws each to the top and the buttom of the screen) are aligned and screwed tigh to the screen.
now the wizard hardware is a survivor but any tampering with it require tight reseating , screwing and later reflashing (even if the software showed unaffected).
Hi all,
Looks like my Sprint Vogue is flaking out on me. The touchscreen is suddenly and without warning not working at all. Everything else works (all other buttons, activesync, all functions). I'd like to do a hard reset before giving up on it, but I'd really like to sync my contacts/messages/photos/etc before doing that. So here's the problem- I use Dashwire to sync, and I'm unable to hit the "SYNC NOW" button!
Any ideas on how to switch to and activate the bottom left and bottom right menu buttons without being able to touch them? For example, the Inbox and Menu buttons on the Mail app screen, or Album/Slideshow on the Photos and Videos screen? If I can get to those I'll be able to activate the sync. Any help would be great!
Thanks,
Bogus
There is a application called "MyMobiler" which allows you to control your phone over ip/usb/bluetooth. If i remember correctly launching the installer on your pc while your phone is connected to activesynch will install it without having to press anything.
Awesome, thank you. That did exactly what I needed it to!
Once it finishes sync'ing I'll give the reset a shot and see if the screen is really borked or not.
No problem glad i could help. If the touchscreen refuses to work you might wanna try replacing it. The part is called a digitzer and they go for 15-20 dollars online. I bought one and it wasn't difficult at all to replace.
Yeah, that's the plan. Hard reset didn't fix the problem, so I'm guessing that part is busted. Between this site and PPCG I found the guide for taking apart the phone, so it's looking like I'll be doing some minor surgery in a few days.
bogus83 said:
Yeah, that's the plan. Hard reset didn't fix the problem, so I'm guessing that part is busted. Between this site and PPCG I found the guide for taking apart the phone, so it's looking like I'll be doing some minor surgery in a few days.
Click to expand...
Click to collapse
How would the touch screen instantly not work?
maybe someone let it fall and put it back to normal like nothing happened
and i know what u mean.I dont wanna give up my vogue. EVER,
but im 15...by the time im 30, i wont remember what vogue is.LOL.
Actually, it seems to have developed a very small air bubble in the very upper left corner. I'm pretty sure that's causing the digitizer to think there's constant pressure in that area, evidenced by the "Start" menu occasionally activating when I turn on the phone. I ordered a new digitizer anyway- the set of torx screwdrivers I'd need to open the case cost the same as a new digitizer and the screwdriver I need. I don't really understand how the air bubble formed (or even what it is contained in), but one way or another I'll resolve the problem next week.
And I just turned 26- I'm sure by the time I'm 30 I'll be sporting a Touch Pro 4 running Windows Mobile 8.5
Well, the digitizer and tools came much faster than I'd anticipated (I won the auction on eBay on Friday, paid same day, and got it in the mail today, shipped from CA to NY!). So I dove right in. It was a straightforward affair- remove the four torx screws from the back under the cover, remove the speaker, pry open the front from the mainboard, disconnect the keypad circuit board from the mainboard and the digitizer from the keypad board, push out the old digitizer, swap in the new one and hook it all back up.
Not for the faint of heart to be sure, but for someone who likes to tinker it was a lot of fun. Took maybe 15 minutes because prying the case from the mainboard was difficult. More accurately, the top plastic case is extremely thin and fragile- if you do this you'll almost definitely crack it in at least one place. If not, you'll crack it pushing the digitizer out from behind. But I'm not that worried about cosmetics, I got my Vogue second-hand off-contract, refurbished, so it wasn't exactly mint to begin with.
On the plus side, the repair worked like a charm! I tested every touch feature I could think of and as many areas of the screen as I could, it actually seemed to respond better than when I initially got the phone. The odd part is I could still see the air bubble in the old screen, and couldn't flatten it out even by squeezing on both sides of it. I wish I knew how it formed so I could prevent it from happening again, but I'll just have to be careful.
So to anyone considering this project:
If you're worried about damaging the casing and have insurance or a warranty or something like that, take it to the phone company to get it repaired.
For anyone else, the $15 bucks for the screen and three tools is a lot cheaper than buying a new phone. Plus you get the geek cred for repairing your own phone.
Hi, I come on here quite a lot for information as it's an amazing resource! This time however, I'm attempting to give something back!
I experienced the "black screen on slide out" on Monday. Phone completely screwed. I've also had a few droppages and had it apart once before so there's no way warranty is gonna help!
I stripped it down and soon discovered what it is that actually fails on the ribbon. The coating had worn through due to rubbing on something during the slide out / in process. it had been playing up for a while, probably due to shorting out on the metal case, but now the tracks (aluminium?) had worn right down.....
In pic 1 i've circled the worn area. The shiny section is where i'd tried taping over it to prevent shorting, before i realised the tracks were gone.
Got an almost new one off ebay for 15 quid and, realising it was going to happen again, came up with a solution that, so far, looks like it will work....
A while back I bought some "anti rattle felt" for my car's dashboard - really thin and strong self adhesive felt to prevent squeaking joins between dash sections. I cut a piece of this and stuck it to the new ribbon. Once this stuff is on it's well stuck, by the way!
See pic 2 for the modded ribbon cable.
On reassembly everything is working just fine so far! Here's hoping that it lasts longer than 6 months this time!
Just need a new casing now as mine is decidedly second hand!
Hope this turns out to be of use to someone!
cool story bro
when i took apart my xperia to replace the housing this seemed like a really weak point in the device. glad to see someone who has had the problem has been able to fix it
Why does the screen go black?
Hi,
When the coating wears off the ribbon cable it exposes the tracks in it. when you slide the keyboard out the exposed tracks short out on the metal casing and the screen loses it's input signal.
thats whats happened on mine at least and i presume quite a few others?
HTH!
Update:
That's interesting: My phone was also losing signal with the keyboard out, and occasionally while closed up as well. It would just randomly drop to "no signal" for a few seconds.
It hasn't done it since replacing the ribbon cable.....could be coincidental of course.
I'm having the same problem
It just started a week ago and I got the phone in January off of ebay. I'm new to opening up the phone so could anyone help me find the correct tools or have a link to a site with pictured instructions?
I noticed that the sliding mechanism started to go loose about 4-5 months ago but didn't expect the screen not respond in landscape mode. I have yet to see the other symptoms you all are referring to. I would like to fix this before it get worse.
In mine case it went totaly black after one week of this problem... You have all the instruction on youtube, there is where i looked. For tools you can be inovative, but the exactly right ones come with housings from ebay, it is only 15EUR, and i bet you have some cracks so it wouldn't hurt replacing. That is what i did, along with ordering new sliding mechanizm, and new ribbon cable.
I am open for ideas to prevent my ribbon cable from being cut at it weakest point again.
I'm assuming my flex ribbon went bad yesterday, since sliding the keypad out causes my screen to shut off.
Already ordered a cable off ebay and will attempt to replace it myself :O
Replaced my flex ribbon cable with one I bought on eBay. The screen doesn't turn on at all now, which leads me to believe the cable I was sent is defective. Put the old one back in and it works okay, less landscape mode. ughhh what a pain.
great tips! my input is I bought a case off of ebay that was ~60$ and everything actually fit fine for me...so I wouldn't discount every seller but you do get what you pay for, the 15$ cases are probablly the ones that will give you problems
I working in a mobilephone repair center if anyone need help drop me a priv... i able to get 2nd hand or even brand new components
Replaced the flex ribbon cable -
I got my flex ribbon cable a few weeks ago and took it to my local repair shop. They replaced it but the LCD screen/optical joystick receives no power. The touchscreen and everything else on the phone works just fine now. I thought it was a defective item so it was exchanged with a new one.
Got the repair shop to replace it again and the outcome still remains the same as the first.
Theres no light coming from the screen nor the side illumination.
I just told the repair shop to just place the original back in for the mean time.
Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power botton.
Could it be defective a batch that the seller was sending out? or the repair shop's mistake and is playing dumb so they do not have to admint fault?
Hopefully there's an easy fix to this problem.
-Also I did inspect the ribbon before and after the repair. looks new as the OEm
Can anybody help me out with this new problem after replacing the cable -
perhaps you should try a hard reset. Ive had problems in the past where the optical joystick and the illuminators did not work, and that worked for me.
On the other hand, the top illuminators are on the same piece of hardware as the flex cable that was replaced, so a faulty flex cable is possible. The bottom illuminators are on the circuit board that the optical joystick attaches to, separate but connected to the flex cable.
Ive recently replaced my flex cable and touchscreen. The experience i had with the faulty touch screen was that it appeared to receive no power, but was in fact displaying a dark backlit illumination that could only be seen in the dark. At the same time however, the screen did not display anything. I'm not sure if this is similar to your experience, but if so then your touchscreen would need to be replaced.
ive done all repairs on the xperia myself, and one thing ive discovered is if something doesnt work right after a repair, simply disassembling it and reassembling it to make sure all the connections are properly done has worked for me in the past.
"Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power button."
Now when you say the power button, do you mean that a red light appears under it?
I dont know if i can come to a conclusion or that i can help (or have helped) you come to a conclusion, but i can only assure you that the xperia acts out in strange and weird ways.
Good Luck!
Tags
Dismantle / Disassemble Sony Ericson Xperia X1
http://www.ifixit.com/Teardown/Sony-Ericsson-XPERIA-X1/788/1
http://www.formymobile.co.uk/xperiadisassembly.php
http://www.youtube.com/watch?v=AWDurQrRt-Y (REAR)
http://www.youtube.com/watch?v=iyGUbxFqvyc&feature=related (FRONT)
http://www.youtube.com/watch?v=elgC8hwHfYQ&feature=related
For info.
Mike
Thanks for the links. I've tried the hardreset and restoring the original rom but the issue is still there. It's really bugging me that everything works but the LCD screen. I'm currently using MyMobiler to use my phone. The touch screen works fine and so does the soft keys. Just no power for the lights. I might just give up and wait for another phone that catches my eye and then tinker with the xperia myself. but if anyone got a solution or want me to test something then I'll give it a try.
My warranty is no longer affective so I'll use my phone as a tester to help others with any problems.
TRIONDAVE, how's your Xperia running now with the cable mod that you did? Its been 6 months since you created the thread. I hope you're still around.
My Xperia X1 works nearly fine, except for the keyboard issues, so I'm thinking of opening it up. If your Ribbon mod helped I might just do it too once I've got it opened. Mine has a MOUNTain of cracks though, and the battery compartment itself is cracked on both side enough to make the compartment CURVED. Hence the Battery cover doesn't sit well.
I'm looking around for broken Xperias which I might be able to use to change the internal cracked casing. Lets see.
DatDereX1 said:
cool story bro
Click to expand...
Click to collapse
My thoughts exactly.
Hello guys, I am in need of real help over here!
Its just that Ive replaced my ribbon cable, the old one got screwd up.
However I got done for 10 minutes ago, tried to start up the phone.. without success :,(
The ribbon cable doesnt have anything to do with the start up, only the screen am I correct? Cause I cannot even start my phone..
Ive connected the charger, but when I remove the battery it shows a red light, meaning no battery, correct?
So what may the problem be exactly? Maybe the battery is all dead, or?
PLEASE HELP!
for the people with ribbon failures how long have you had the phone before it occurred ? im just interested on the cables lifespan.
mine is fine so far but i have noticed the slider is flimsy and rocks left and right.