Hi,
I've searched the forum. There are many threads about Terminal Services client problems; however they are in general about full screen availability.
My problem is somewhat different:
I am looking for resolution setting like in the Windows XP Terminal Services client.
Is there any software or hack that enable this ?
I want to be able to manage a bigger area of the remote desktop.
So I need a client which would change the remote desktop resolution setting.
I can't believe that MS didn't put a client with this capability in WM5.
If that's not possible, maybe I cold try to use a virtual screen software that would allow higher resolution on my PPC device with panning ???
Is there some sort of application for this ?
Please DO FOLLOW my articles / DO use the forum / local Wiki search engine - I've also answered your q in both the Wiki and .
In a word: with TSC, you can't.
Read http://forum.xda-developers.com/showthread.php?t=288506&page=3
Menneisyys,
Thank you I'd already read the first 2 pages but the answer is in 3rd page I guess. I'll read it. I hope there is "hope"
At this moment I have a more urgent problem:
(http://forum.xda-developers.com/showthread.php?t=291379)
So I'm trying to solve it first...
mrmrmrmr said:
Menneisyys,
Thank you I'd already read the first 2 pages but the answer is in 3rd page I guess. I'll read it. I hope there is "hope".
Click to expand...
Click to collapse
Sure there is - all the reviewed apps allow for ANY remote desktop resolution; it's only TSC that doesn't.
I have a very bad restriction: I can only use remote desktop protocol because of y work company policy.
It's not much of a solution, but use Nyditot and enlarge your virtual screen size. Then shrink to fit the display, and it'll match your screen resolution.
V
vijay555,
I tried Nyditot and it's impressive. Really nice to see like 640x480
However, I couldn't adjust the screen alignment. My pointer does not go to some areas of the screen. How can I do pointer alignment ?
Ooops I made a mistake.
Now because of Nyditot my device does not boot up.
It stays in the splash screen forever.
Is there anything else then Hardreset ?
mrmrmrmr. I've used Virtual display on a SPV M5000 and with the default rom it would freeze as soon as I booted to enable it and a hard reset was required.
I tried it again after flashing a different rom and it worked a treat. Since then I've loaded various AKU3 roms and now WM6 and Virtual Display has worked with all but that original Rom.
Afraid you'll need to hard reset but try different roms to see if you can find one that VD is compatible with
If you get it working VD will allow much larger screens than 640x480 if you can stand scrolling around.
Hi guys..
I'm looking for a videolan-remote.. or a remote application which makes it possible to control videolan..
i did search this forum (videolan and vlc) but didn't find anything.. and i googled, found a java-application.. but it doesn't seem to work for me.
anyone got some software for that?
thanks in advance
martin
You can check out "Salling Clicker". A software that let you connect your computer via bluetooth or WLAN. You can then add plugins like remote winamp remote, vlc remote, powerpoint etc!
heyhey
thanks for your reply and sorry for my late answer..
that looks good, will try it.. but there's nothing like that as freeware, or is there?
Try this : http://www.1800pocketpc.com/2009/03...ntrol-vlc-player-via-your-windows-mobile.html
hi how does this work?
ip?
port?
I know its not the same as the program specific stuff listed above, but if you want the swiss army knife of pc control....
check out some of the many remote desktop solutions. I like Remote Touch most, has tons of advantages over VNC protocol. If you want to use a standard vnc setup i recommend mocha vnc. Remote touch is an easy setup, and runs a lot faster. It was developed here on XDA...
vlc remote
480x800 skin
\Program Filec\VLCRemote\Skins\
zbycho_s said:
480x800 skin
\Program Filec\VLCRemote\Skins\
Click to expand...
Click to collapse
... and the 640x480 for Touch Pro/Diamond/etc...
REQUEST "Language button"
Hi there,
I love this app, no more 20 remote controls in the bed! If somebody already digged in or knows how to do a language button with the xml file?
I tried around with the vlc HTTP orders, but it seems the languge function has to be programmed to use it in the gui later?
How much donation is expected for the language function to be programmed?
Thanx!
Hi,
does anyone know if there are any active development done on the VLC Remote software?
I was thinking of taking the existing code and make some changes but I need to get in touch with the creator to make sure it is ok...
Two main things I was planning to do is:
* Change the browse screen to use Sense UI. I have to look into if you can get the mp3 tags needed to display Artists via VLC http interface.
* Add ability to have multiple VLCs defined, so that you can control different zones in your house.
Next step I would like is to make it possible to link different zones together so that one VLC is master and one or more VLC players just plays what the master streams... a little bit like Sonos system....
Anyone interested in any of these additions?
Cheers
Jonas
Yeah, sure i'd be interested, this proggie could use some UI treatment Making another buttons pix wont be so hard, but some additional features would be interesting.
NODeeJay said:
... and the 640x480 for Touch Pro/Diamond/etc...
Click to expand...
Click to collapse
Made a new skin based on yours
Hi all,
I just had an idea: I was wondering, if it is possible to connect the X1 either by bluetooth, WLAN or USB to the PC and use the X1 keyboard as a keyboard for the PC.
I was also thinking, that the touchscreen could be used as a kind of touchpad (like on notebooks) to control the mouse pointer on a connected PC.
So I was searching the Internet if anybody wrote a software that can just do this, but had no luck. So my question is: Does anybody know a software that can just do this?
Cheers,
foo
P.S.: I know there are some remote controls for winamp & co but this is not what I'm looking for. Actually I'd like to have something like this for a much more smaller amount of money by using my xperia and a special software.
foo said:
Hi all,
I just had an idea: I was wondering, if it is possible to connect the X1 either by bluetooth, WLAN or USB to the PC and use the X1 keyboard as a keyboard for the PC.
I was also thinking, that the touchscreen could be used as a kind of touchpad (like on notebooks) to control the mouse pointer on a connected PC.
So I was searching the Internet if anybody wrote a software that can just do this, but had no luck. So my question is: Does anybody know a software that can just do this?
Cheers,
foo
P.S.: I know there are some remote controls for winamp & co but this is not what I'm looking for. Actually I'd like to have something like this for a much more smaller amount of money by using my xperia and a special software.
Click to expand...
Click to collapse
There's something on this very forum for a VERY small amount of money - all you have to do is learn how to search and it's yours. I'll even give you a clue - it' in the "Development & Hacking" section.
Go here http://t2remotetouch.blogspot.com
Is there a thing like that that use bluetooth only? like a usual bluetooth keyboard or mouse.
like that: http://www.microsoft.com/hardware/mouseandkeyboard/features/bluetooth.mspx
Thanks kostis60, this goes in the right direction, though it lacks the touchpad feature which I'd need really badly. This app is more like "Windows Remote Desktop" or VNC.
akp99 said:
There's something on this very forum for a VERY small amount of money - all you have to do is learn how to search and it's yours. I'll even give you a clue - it' in the "Development & Hacking" section.
Click to expand...
Click to collapse
Are you also referring to the application mentioned by kostis60 or is there something else?
foo said:
Thanks kostis60, this goes in the right direction, though it lacks the touchpad feature which I'd need really badly. This app is more like "Windows Remote Desktop" or VNC.
Are you also referring to the application mentioned by kostis60 or is there something else?
Click to expand...
Click to collapse
nueUSBkeyboard is what I use - nt bothered about track pad - I think there is something that works with this but not sure of name.
And there's a paid for prg that works over bluetooth aswell but again its name slips my mind
Check out Pebbles. It allows controlling of the PC via Touchpad and Keyboard (Hard- and Softwarekeyboard). It is for free and works via Bluetooth and Wifi.
Nice Gadget but a wireless mouse and keyboard is more convenient from my perspective.
You could also use MS Remote Desktop Client to atke remote control of your PC.
Also LogMeIn works even better.
I think he is more looking for software to make the device a mouse/keyboard, not remote desktop software. These are two very different things. +1 for nueUSBkeyboard though.
Mobileremote by mobilesrc is what you are looking for.
Works like a charm for me.
http://www.mobilesrc.com/MobileRemote.aspx
mmaaxxii said:
Mobileremote by mobilesrc is what you are looking for.
Works like a charm for me.
http://www.mobilesrc.com/MobileRemote.aspx
Click to expand...
Click to collapse
YES! That is exactly what I was looking for!
Great! Thanks
MobileSRC MobileRemote Xperia Issues
Okay, is it just me or is anybody else having the following issue with the Xperia keyboard when using MobileSRC MobileRemote..?
When I use the keyboard all of the 'Blue' characters are displayed rather than the letters. The only button that also has a 'Blue' character assigned to it which works correctly is 'Q'.
The buttons without 'Blue' characters (A, S, D, F, G, @, Z, X, C, V, RETURN, TAB, DEL) work fine.
'W' gives me ", 'E' gives me /, 'R' gives me & and so on.
Shift doesn't work either.
I've tried pressing the blue button, Sym and everything else but no change.
Any ideas?
Regards
Sonny
sonnysoul said:
Okay, is it just me or is anybody else having the following issue with the Xperia keyboard when using MobileSRC MobileRemote..?
When I use the keyboard all of the 'Blue' characters are displayed rather than the letters. The only button that also has a 'Blue' character assigned to it which works correctly is 'Q'.
The buttons without 'Blue' characters (A, S, D, F, G, @, Z, X, C, V, RETURN, TAB, DEL) work fine.
'W' gives me ", 'E' gives me /, 'R' gives me & and so on.
Shift doesn't work either.
I've tried pressing the blue button, Sym and everything else but no change.
Any ideas?
Regards
Sonny
Click to expand...
Click to collapse
I have the same issue, but the developer announced a new bugfix release in the next couple of weeks also including some bugfixes for hardware keyboards.
I had tried this application before. At that time, it didn't yet work well with the X1. Now, however, it's getting really close to being fully functional.. nice!
Current issues I find annoying:
- HW keyboard support (always in FN mode)
- Touchpad can't go fullscreen (except for LMB and RMB ofc)
- Connecting it is a bit awkward (though should be full auto in retail version)
I'll soon be buying a media center with my TV. I'm hoping I can get my X1 to be the HID. Little more fixes and this app will do all I need.
Angelusz said:
- Connecting it is a bit awkward (though should be full auto in retail version)
Click to expand...
Click to collapse
I bought the application and connecting works like a charm.
As I need the touchpad functionality most of the time, I bought it even with the keyboard problem - still worth the money for me
In case I have to enter something, I switch to the software keyboard.
try this
sailing clicker -
does exactly what you ask...with extra media player functions etc.
http://www.salling.com/clicker/windows/
foo said:
I bought the application and connecting works like a charm.
As I need the touchpad functionality most of the time, I bought it even with the keyboard problem - still worth the money for me
In case I have to enter something, I switch to the software keyboard.
Click to expand...
Click to collapse
Aye, I'll be waiting for a proper release, might buy it then.
Hi Folks,
I have a Touch Diamond 2 and having problems with software running in 640x480 mode (like ScummVM). I know there are workarounds, but I thought it would be nicer to use the leftover space. As there are no buttons for quicksave, or something like that, I would like to make a 160pixel software button application. I made some tests already. But now I don't know how to load ScummVM (for examlpe) in my application. If i start it from my application, it hides my keyboard. Or do you have an other idea?
THX in advance
Hello,
this might sound strange, but I need plain escape and alt keys on my hardware keyboard. The reason for that is the QEMU emulator. After testing it's android port with my DOS image (with a nice collection of games included inside) I found out that arrow keys work perfectly and games are stable, but I need to map hardware keys as alt and escape or create on-screen keyboard for QEMU (the way Windows Mobile port has). I would appreciate any help as I do not have any experience in this sphere. I couldn't donate much, but I could share my DOS image with any shareware games required other members
Hey try looking online for a android softkeyboard that has those keys or try the market and search keyboard and see what you can find but other than that i dont know what else to tell ya but i was wondering if you could post the images and eluminater here so i could try?
Thanks
Sent from my T-Mobile G2 using XDA App