Hello,
I am trying to develop a J2ME tool that can caputre the wifi signal on a pda. (for example on a qtek 9000 with windows mobile 5 edition)
With that java programme I like to see all the settings of a captured wifi signal, like ssid , channel, mac, ip,...)
and so on.
Is there anyone who can help me with some info about how to get info of your device on J2SE of J2ME. info like your connected of not, maybe battery life,..
and does somebody know's a www adres with more info on capturing wifi with java or something like it?
(an open source wifi capturing tool in java would also be great)
thanks
Hi Jen,
I am also looking how to do that with Java... I have a QTek 9090 (BlueAngel) and the most relative thing i have found is the PlaceLab http://www.placelab.org/. I just found it so i haven't tried it yet... If you have anything else please post it...
hello, I also only have the placelab thing, but connecting with wifi signal seems to be impossible!
You can only see the different AP's.
thanks for the reply
Hi,
I've got a HTC HD running Windows Mobile 6.1. I am trying to connect to eduroam in my campus (university of plymouth), but after hours of trying and still no luck, I really need your expert input.
The setup guide for eduroam for other OSes is available here www.plymouth.ac.uk/eduroam.
Has anyone successfully connected to eduroam?
What are the configurations?
By the way, I've also tried the lastest version of securew2 (v1.1.3), but again, no luck. I was not even asked for my username and password.
I really hope that you guys can shed some lights into this problem. Your help is greatly appreciated.
Regards,
dsPICgy
you are not alone
i also have this problem with eduroam..and others too.
it seems to be a problem of the omnia, what nobody knows whats the problem.
I'll tell you my config for University of Seville in my Diamond. First I need to install Secure2w and the ttls client.
When you configure the settings, trie to demark all checkbox, leave PAP, and put your username ([email protected])and password, then it should connect.
I want to say that when i've got an elf, secure 2w make it shutdown xD, so this soft is not perfect
i had the same problem and i solved it in the registry... i have written a tutorial for the entire setup, just have a look at this section http://www.freecoffee.de/index.php/Eduroam_mit_Windows_Mobile
its completely in german,but the registry information should help you
Got eduroam connection to work : http://forum.xda-developers.com/showpost.php?p=5480577&postcount=10
Hey, perhaps I am blind, but I can't find anything here that would help me.
I am looking for a Software that helps me controlling my Mobile Device (HTC Touch Diamond) from my Computer, via LAN, Bluetooth, best would be over Active Sync - USB
Does anyone know there something helpful?
Thanks a lot
My Mobiler
Please have a look under www.mymobiler.com
Thanks! This Software is great!!! Better then I expected!
this is pretty coool! ashame the lag when textin from the laptop
you may wanna check this out
http://soti.net/
remote control via internet
hi guys,
perhaps I am blind too, but I can't find anything here that would help me.
I am looking for a Software that helps me controlling my Mobile Device (HTC Touch Diamond) from my Computer, via internet. I search a software like VNC but working in reverse!!! So, i need to run a program installed on my diamond while the phone is several miles far from me
Does anyone know there something helpful?
Thanks a lot
P.S. sorry for my english....
Use VNC server (pocketvnc) instead of client.
vnc connection problem
hi HwangPL,
thank you very much for your replay. After your post i've downloaded pocketVNC server version 1.4.2.0(demo version), but i'm not be able to use it. The vnc client on my pc says "connection failure". I think I'll go crazy before sunday......
If you or anybody else have a solution please post it!!!!!!!!!
Thank you one more time.
Try to use old VNC Viewer on your PC. I cannot connect when my mobile phone uses GPRS connection, but it works with WIFI.
I cannot test it right now, cause I don't have any WIFI connection (it surely worked some time ago).
I'll try to test it tomorrow maybe
I think there are a lot of problems with the type of connection. I use a hsdpa connection with my diamond, while my pc is connected to internet with another mobile phone that works with an umts connection. I'm not sure how to configure the firewall. However i'm not sure how to configure the tabs of vncpocketserver. I think that's why i'm not understand very well english (i'm italian) and on the web i didn't found anything wrote in my language.
So, you are my only, precious, last chance......
CIAO
I think there are a lot of problems with the type of connection. I use a hsdpa connection with my diamond, while my pc is connected to internet with another mobile phone that works with an umts connection. I'm not sure how to configure the firewall. However i'm not sure how to configure the tabs of vncpocketserver. I think that's why i'm not understand very well english (i'm italian) and on the web i didn't found anything wrote in my language.
So, you are my only, precious, last chance......
CIAO
OK. I used vncserver v.1.4.5.0 demo, on my pc VNC Viewer Enterprise E4.5.1 via WIFI (on mobile as internet connection) and it worked. Goodluck!
hi, i came back!!!
Finally i've found the solution. The problem is the IP address. My operator doesn't give me a public IP but a NAT address. This is a very big problem because the phone can't accept any type of connection by the web. Fortunately i found a beutiful program called "Hamachi" that works on both the computer and the PocketPC. So i resolved my problems.
Thanks very much to all for suggestions.....
Hey there,
I am having i think a small problem with both SOTi and My mobiler.
I Have a Touch diamond and when i am seeing the camera on the PC all goes black in PC preview, but on device i can see the camera images.
Can anyone help.
Brgds
Hi
Strange nobody else having same problem.
I believe the reason with the no preview its due to the autofocus, can anyone check on this.
Tks in advance
Jeyo Mobile Companion 2.1
Did anybody have successful wireless data connection with DUN on the Athena100 (htc advantage x7500)?
I have WM6 Pro and tried the BT_DUN.cab and the WM6_DUN.cab, but without any result.
Nevertheless this works perfect on f.e. Touch (P3450), but not at all on Athena 100.
I think I have read and tried all what was published about this DUN-problem with WM6 and what causes problem to connect with TomTom Go or others that only use DUN.
Because now, after weeks searching and looking I cannot find any solutiuon, I hope somebody has experience with this problem and can help me.
Thank you.
Hi,
I hope this fits on the xda-dev boards. I have a hx2110 running WM6.5 23016. This device only has a bluetooth radio, nothing more. But since the iPhone allows bluetooth tethering i would appreciate if someone had a solution for this.
I have a moving-map application for aviation on my hx2110 and would like to be able to download live weather onto the hx2110 for display on the map while flying.
I have tried the general bluetooth DUN and dialing *99# etc but no luck. Any1 have any ideas please? Maybe there is an app on Cydia that enables DUN which i haven't been able to find yet?
Edit 1: Yes, my iPhone carrier allows tethering.
Edit 2: I'm the commander of the aircraft and decide whether i can use a cell phone in flight or not
http://wiki.xda-developers.com/inde...for your other Pocket PC's! - a full tutorial
Ok my iPhone doesnt provide the DUN profile as mentioned before All i have is PAN Networking which looks like its connecting but then just fails without any specific error message. Maybe there is a log?