Related
Hi all I've owned this great phone since they first came out.
I had Vista on my machine then and I synced it up no problems.
2 Days ago I did a fresh install of Vista when it was all done my phone synced up again fine.
However yesterday I did a final fresh install just so I could get it just the way I want it without excess programs on.
However now my phone will just not connect.
I'm good with PCs however I'm stumped. It makes the ding sound when connect however WMDC does not recognise.
I have the latest WMDC x64 patch installed. Any pointers would be greatly appreciated.
PS. this is a great forum
Si
Can none of you Trinity gurus help??
Or point me to another forum which might have info I require on.
I am also having problems connecting to vista - windows mobile device centre, with my M700.
When I connect to the PC the driver installs as Microsoft Windows Mobile Remote Adapter, and the device centre does not reconise that the device is connected.
Does anyone have the correct driver they could pm me or post a link, or any fixes.
pda's dont use real drivers they use generic drivers (1 driver for all of them)
that driver comes with the sync program
many many pda owners have issues with vista
by no fault of their pda's
Hmmm try do a window update or use another usb port
I have managed to resove this issue by clicking on:
Start>Settings>Connections>USB to PC> Then unticking the option "Enable advanced network functionalaty".
I had a similar problem when I tried to connect my brothers m700 to my p.c. using vista etc... It only recognised my m700 that was sync'd with it earlier and not my brothers for some reason, weird. No matter how many times I rebooted the p.c. or his m700 it would not sync at all, it just did not recognise that it was connected via usb.
mdyson said:
I have managed to resove this issue by clicking on:
Start>Settings>Connections>USB to PC> Then unticking the option "Enable advanced network functionalaty".
Click to expand...
Click to collapse
I had the same problem when I first got my P3600, after I did this it worked fine.
If Windows Live OneCare is installed on your machine, it may be blocking the device connectivity. Please click here for the steps to configure Windows Live OneCare to allow the device to connect.
The driver installation may not have completed successfully. If you think this may be the case, follow these steps:
Keep your device connected
From the desktop, go to Start > Start Search
Enter "Device Manager" or "devmgmt.msc" to launch the Device Manager window
Look under the "Network adapters" node for "Microsoft Windows Mobile Remote Adapter". If this is not present, skip to step 5. Otherwise, right-click "Microsoft Windows Mobile Remote Adapter" and choose to "Uninstall"
Look under the "Mobile Devices" node for "Microsoft USB Sync". If this is not present, skip to step 6. Otherwise, right-click "Microsoft USB Sync" and choose to "Uninstall"
Disconnect and reconnect your device. Your device driver will re-install and Windows Mobile Device Center will launch.
Good Luck!
I just got a new laptop running Vista and I am just having tremendous issue trying to sync my Sprint Mogul (HTC Titan) to Windows Mobile Device Center (WMDC --> ActiveSync replacement in Vista) and Outlook 2007.
Basically, when I connect my Mogul via USB (NO Bluetooth), the device shows that it is connected for syncing to the laptop. But WMDC shows "connecting..." all the time and just not syncing. The only way to do this is to reboot the laptop.
The same phone sync just find to a Windows XP machine. I have tried the following but to NO AVAIL:
- Disable "Enhanced network USB function" in the device (Start -> Settings -> Connection -> USB to PC
- Remove all background services in the laptop, like Anti Virus, Vista Sidebar, Spy Sweeper.
BTW, my Mogul is running WM6, no custom ROM or anything.
Does anyone have the same issue and can provide me with the solution? It seems Vista and WMDC just breaks everything.
what does sync center say?? I'd try going into WMDC and unchecking all the sync content and seeing if it will connect...chances are theres something that it's trying to sync and it won't....I've also ran into a problem recently where outlook must be open for it to sync properly...you can try that.
There are 2 WMDC applications:
WMDC (Start -> Programs): just say connecting
Sync Center (on Taskbar): when I double click, under "View Sync Partnership", it just say "Disconnected"
I always run Outlook 2007 before Sync, so I suspect something else in Vista causing it.
I have tried a fresh Vista install, and it sometimes work, sometimes doesn't.
What I found out is like this:
1) Start Vista and Outlook
2) Connect device to WMDC - WORK
3) Disconnect, but Outlook remain
4) Reconnect - DOESN'T WORK
lanwarrior said:
There are 2 WMDC applications:
WMDC (Start -> Programs): just say connecting
Sync Center (on Taskbar): when I double click, under "View Sync Partnership", it just say "Disconnected"
I always run Outlook 2007 before Sync, so I suspect something else in Vista causing it.
I have tried a fresh Vista install, and it sometimes work, sometimes doesn't.
What I found out is like this:
1) Start Vista and Outlook
2) Connect device to WMDC - WORK
3) Disconnect, but Outlook remain
4) Reconnect - DOESN'T WORK
Click to expand...
Click to collapse
I have Vista and Outlook 2007 and never had a problem with syncing. I just tried the 4 steps you outlined and it worked when I first connected my Mogul and also when I reconnected the Mogul. What version of WMDC are you running? I have 6.1.6965.
I usually don't run Outlook before doing a sync. I've never had a problem with this either way.
2 Things
I know you said that it shows something about being connected, but have you gone to My Computer and tried to access your device? This will help determine if its just not being recognized by the system properly, or if the sync software is hosed.
Additionally, try searching here or on ppcgeeks.com for the "update vista drivers". I didn't need them - but apparently some folks did. Depending on how long you've had Vista, and/or whether or not you've done M$ Windows updates, I'm thinking your driver could be hosed.
I too have Vista - and I can sync just fine as well as transfer files back & forth through My Computer. I also sync the same device up with an additional computer (how sweet is that? I wish iTunes would freakin' work like that one of these days!) that's on XP.
Would love to help more if need be. I'll be around Saturday if you want to PM and try going over your settings vs mine or something.
Sometimes I have to connect my mogul up to 6 times before it connects properly to my Vista laptop. I now always open device manager before connecting the mogul. It doesn't connect properly until the Microsoft Windows Mobile Remote Adapter driver installs correctly under Network Adapters AND the pocketpc driver installs correctly under portable devices. And it is very wierd because sometimes it works on the first try, and other times like I said b4 it can take up to 6 tries before it works right. I have looked up the error codes that it generates in the Event logs and there are a lot of people who are having the exact same issue, so I chalk it up to a Vista problem and hopefully it will get better after SP1 is released.
mem_reddog said:
Sometimes I have to connect my mogul up to 6 times before it connects properly to my Vista laptop. I now always open device manager before connecting the mogul. It doesn't connect properly until the Microsoft Windows Mobile Remote Adapter driver installs correctly under Network Adapters AND the pocketpc driver installs correctly under portable devices. And it is very wierd because sometimes it works on the first try, and other times like I said b4 it can take up to 6 tries before it works right. I have looked up the error codes that it generates in the Event logs and there are a lot of people who are having the exact same issue, so I chalk it up to a Vista problem and hopefully it will get better after SP1 is released.
Click to expand...
Click to collapse
How did you get this MS Windows Mobile Remote Adapter and Driver? Windows Update or manual download link?
I don't know how to set my ppc-6800 (same as Mogul) to sync my contacts and e-mails with outlook 2007. When i connect it to my PC, it appears in my computer and i can browse in and transfer files in both ways. But still no contacts or e-mail sync...i would like to get help.
skny said:
I know you said that it shows something about being connected, but have you gone to My Computer and tried to access your device? This will help determine if its just not being recognized by the system properly, or if the sync software is hosed.
Additionally, try searching here or on ppcgeeks.com for the "update vista drivers". I didn't need them - but apparently some folks did. Depending on how long you've had Vista, and/or whether or not you've done M$ Windows updates, I'm thinking your driver could be hosed.
I too have Vista - and I can sync just fine as well as transfer files back & forth through My Computer. I also sync the same device up with an additional computer (how sweet is that? I wish iTunes would freakin' work like that one of these days!) that's on XP.
Would love to help more if need be. I'll be around Saturday if you want to PM and try going over your settings vs mine or something.
Click to expand...
Click to collapse
I agree with the problem being a driver issue, mine searches for updates every week. I've had a vista machine since october last year and havent had any problems at all with syncing(usb or BT) or changing roms. As a suggestion when a first got my 6800 in July and switched to the 2.17 rom i had to upgrade to a newer version of WMDC, check your version and the most up to date one on HTC's website. Hope that helps.
Hi all,
I am bringing this thread back because now I have another issue with Mogul syncing to Vista with Outlook 2007. This is actually for my friend but the issue is simply puzzling and I hope anyone have insight on this.
My friend have another laptop and a Mogul and when he connect the device to the laptop via USB, Vista Mobility Device Center (MDC) only recognize it as a MEDIA PLAYER, not as a PDA.
I tried the following:
- Disable/Enable USB Advanced Network functionality (System -> Settings -> Connections)
- Hard reset the Mogul
- Connect the devices and run Windows Update (to check if there is a driver issue)
When I connect that same Mogul to a Windows XP, it sync just fine.
What do you guys think?
Guys,
Just a quick update on the issue whereby I cannot sync the Mogul to Vista: the driver updates did the trick! After installing the driver update, syncing works just fine! I wonder why M$ didn't include this update under Windows Update.
Thanks for the help all!
lanwarrior said:
Guys,
Just a quick update on the issue whereby I cannot sync the Mogul to Vista: the driver updates did the trick! After installing the driver update, syncing works just fine! I wonder why M$ didn't include this update under Windows Update.
Thanks for the help all!
Click to expand...
Click to collapse
Please, where did you get the driver updates. Was it a driver on the phone, or for vista.
I am having similar probs, except it appears to sync, but deletes all contacts (inclunding sim!) from my touch dual.
It's shown in the thread above. The driver is available in PPCGeeks. I forgot which thread there, though.
Solution
lanwarrior said:
I just got a new laptop running Vista and I am just having tremendous issue trying to sync my Sprint Mogul (HTC Titan) to Windows Mobile Device Center (WMDC --> ActiveSync replacement in Vista) and Outlook 2007.
Basically, when I connect my Mogul via USB (NO Bluetooth), the device shows that it is connected for syncing to the laptop. But WMDC shows "connecting..." all the time and just not syncing. The only way to do this is to reboot the laptop.
The same phone sync just find to a Windows XP machine. I have tried the following but to NO AVAIL:
- Disable "Enhanced network USB function" in the device (Start -> Settings -> Connection -> USB to PC
- Remove all background services in the laptop, like Anti Virus, Vista Sidebar, Spy Sweeper.
BTW, my Mogul is running WM6, no custom ROM or anything.
Does anyone have the same issue and can provide me with the solution? It seems Vista and WMDC just breaks everything.
Click to expand...
Click to collapse
I found this by accident.
Click on Start > Settings > Connections > USB to PC and *uncheck* "enable Advanced Network Functionality."
Problem solved.
dclong said:
I found this by accident.
Click on Start > Settings > Connections > USB to PC and *uncheck* "enable Advanced Network Functionality."
Problem solved.
Click to expand...
Click to collapse
YUp, I tried that before, but it doesn't work. I have to update the driver to WMDC 6.1.
BTW, to everyone: driver is available here --> http://www.microsoft.com/downloads/...f1-e46a-4a5f-a791-09f07aaa1914&displaylang=en
lanwarrior said:
YUp, I tried that before, but it doesn't work. I have to update the driver to WMDC 6.1.
BTW, to everyone: driver is available here --> http://www.microsoft.com/downloads/...f1-e46a-4a5f-a791-09f07aaa1914&displaylang=en
Click to expand...
Click to collapse
I'm sorry -- was not aware of that. I have automatic updates set up so this question of driver update/renewal never came up for me.
Does this update work for anyone?
My Mogul is hanging on my laptops side...it say "Connecting to Unidentified Device".
And then it just stays there for ever....
Booya said:
Does this update work for anyone?
My Mogul is hanging on my laptops side...it say "Connecting to Unidentified Device".
And then it just stays there for ever....
Click to expand...
Click to collapse
The only way I could get around it is to disconnect my device, remove the device from WMDC - and - remove the PC connection in ActiveSync on the device and start ALL over again.
Also, I found that when you have a lot of data (like I do) to start syncing only piecemeal, i.e. do the first sync with the defaul settings first, then add folders, then add emails, etc.
IMHO - WMDC is so inadequate.
Oh well, tried all of these and still no joy
This works for me on my Sprint Mogul a/k/a HTC PPC-6800
timbouk said:
Oh well, tried all of these and still no joy
Click to expand...
Click to collapse
Disable the Windows Mobile DNS cache. This requires a registry
modification. Windows Mobile does not include a registry editor, but
free third-party editors are available (such as one from www.phm.lu).
Change the value of:
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\InternetSettings\
DnsCacheEnable to 0
If DnsCacheEnable does not exist, create it as a DWORD value.
A soft reset is necessary for the change to take effect.
==============
After that I'm out of ideas ...
Ok so I've liberated SnapVUE on my new Shift and for the life of me i cannot figure out how to get the Vista side of things to work with EDGE/3g.
Win Mobile connects just fine.. syncs with outlook.. etc. And wifi works on the Vista side.. but no 3G.
Any help? Im using ATT and wap.cingular as my EDGE isp.
When the 3G in WM side in on, after switch on the Vista, you need to wait about 1 to 2 min to start up the 3G on Vista.
I had the same problem.
You have to go to the device manager and look under network-devices. There you must see a RSID mobile "something" device (this is your modem 3G) if you had turned it on in communication manager. I activated it and since then, I have a working Internet connection via 3G if I turn on the Modem in communication manager. Just try it.
If it's not working, uninstall this device and reboot. Vista should search and install the drivers correctly.
good luck
basti.hoehne said:
I had the same problem.
You have to go to the device manager and look under network-devices. There you must see a RSID mobile "something" device (this is your modem 3G) if you had turned it on in communication manager. I activated it and since then, I have a working Internet connection via 3G if I turn on the Modem in communication manager. Just try it.
If it's not working, uninstall this device and reboot. Vista should search and install the drivers correctly.
good luck
Click to expand...
Click to collapse
I don't have any such driver in vista's device manager. Not sure what to do!
Had same problem
i had same problem that on vista side wouldnt connect even thou the communications manager said connected..first i put it down to just poor signal..i did notice that there was no signal indicated on vista side in the comms manager..is yours the same ?
anyway finally get fed up with it so i contact htc..tried few things..didnt work..eventually they told me to hard reset vista saide (reload software by pressing F3 button when firing it up..did this now works perfect !!
i had to reload everything back onto vista but hey..it was nothing compared to finally getting it to work correctly
plasticplanet said:
i had same problem that on vista side wouldnt connect even thou the communications manager said connected..first i put it down to just poor signal..i did notice that there was no signal indicated on vista side in the comms manager..is yours the same ?
anyway finally get fed up with it so i contact htc..tried few things..didnt work..eventually they told me to hard reset vista saide (reload software by pressing F3 button when firing it up..did this now works perfect !!
i had to reload everything back onto vista but hey..it was nothing compared to finally getting it to work correctly
Click to expand...
Click to collapse
No, in the connection manager i have 2-3 bars on vista. Would only being on edge matter??
Im wary of resetting vista because i put several hours into software install and config.
Dont know what i did but its working now
i spoke with htc support over this
Sangheili said:
Dont know what i did but its working now
Click to expand...
Click to collapse
hello i spoke to htc report regarding this issue..basically they didnt know either..finally they said hard reset vista side..which i did..guess what it started working again..but then...
i reloaded all my software again and guess what it stopped working again..took me about 5 minutes to work out...i was using zonealarm on my shift..i uninstalled it and guess what..connection worked again
so im guessing you have similar antispy/virus software which is cuasing the same problem
worth a look..hope this helps
Sangheili said:
Dont know what i did but its working now
Click to expand...
Click to collapse
In my case, I switched the connection from My ISP to Media Net (isp.cingular to wap.cingular) and disabled the ATT Proxy.
I have search everything here and on HTC and on Verizon and here is where I am stuck. Using DCD 3.2.0 (but had same problem with 3.1.6) and latest Radio Rom. It seems to connect just fine to a Windows XP activesync 4.5 computer but will not connect to the Mobile Device Center on Vista (32bit).
Looking into the device manager I do see the Mobile Devices/HTC USB Sync driver is active but I do not see the Portable Devices/XV 6800 driver at all.
I do have the "Enable Advanced Network Functioinality" unchecked. I have uninstalled all the drivers and Mobile Sync software and rebooted everything. I even have tried the USB splitter. It seems to half recognize the phone in Vista but the other half is the Mobile Sync part. I do get an error on the phone that says "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer." This is sooooo frustrating as it worked one time on Vista, I think either DCD 3.0.x or maybe earlier and now it only works on XP.
What am I missing here??????
I have search everything here and on HTC and on Verizon and here is where I am stuck. Using DCD 3.2.0 (but had same problem with 3.1.6) and latest Radio Rom. It seems to connect just fine to a Windows XP activesync 4.5 computer but will not connect to the Mobile Device Center on Vista (32bit).
Looking into the device manager I do see the Mobile Devices/HTC USB Sync driver is active but I do not see the Portable Devices/XV 6800 driver at all.
I do have the "Enable Advanced Network Functioinality" unchecked. I have uninstalled all the drivers and Mobile Sync software and rebooted everything. I even have tried the USB splitter. It seems to half recognize the phone in Vista but the other half is the Mobile Sync part. I do get an error on the phone that says "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer." This is sooooo frustrating as it worked one time on Vista, I think either DCD 3.0.x or maybe earlier and now it only works on XP.
What am I missing here??????
Click to expand...
Click to collapse
Have you tried a different usb port on the PC, or a different PC running Vista 32 bit? Mine works fine in Vista & XP.
gc14 said:
Have you tried a different usb port on the PC, or a different PC running Vista 32 bit? Mine works fine in Vista & XP.
Click to expand...
Click to collapse
I have tried different USB ports and no Joy. It looks like it recognizes it as the HTC USB Sync driver shows up and it makes a noise that it found a USB device. I don't have another Vista machine but maybe a 64bit windows 2003 server would be the same. Probably not. It did work once a few DCD Roms ago but not since.
Random Disconnects
I am having a similar problem. Evern since moving to DCD 3.12, I have had a similar problem. I can manage to get connected sometimes but it will randomly disconnect.
For a while I switched to No2Chem and didnt experience the problem.
bishop0114 said:
I am having a similar problem. Evern since moving to DCD 3.12, I have had a similar problem. I can manage to get connected sometimes but it will randomly disconnect.
For a while I switched to No2Chem and didnt experience the problem.
Click to expand...
Click to collapse
Can you post what devices show up when you are connected?
When I went from 3.1.4 to 3.2.0 I started having issues with Sync Center (Vista Ultimate 32-bit) as well. If I restart the PC it works fine for a while, but then suddenly you hear the USB device disconnect noise and thats all she wrote.
The device's charge LED is on, but it doesn't show up in vista anymore unless you restart the PC.
With 3.1.4 I never had this issue.
I wrote up an ActiveSync/mobile Device Manager Troubleshooting Guide in the Wiki, did you try all of those steps?
jambrose said:
I have search everything here and on HTC and on Verizon and here is where I am stuck. Using DCD 3.2.0 (but had same problem with 3.1.6) and latest Radio Rom. It seems to connect just fine to a Windows XP activesync 4.5 computer but will not connect to the Mobile Device Center on Vista (32bit).
Looking into the device manager I do see the Mobile Devices/HTC USB Sync driver is active but I do not see the Portable Devices/XV 6800 driver at all.
I do have the "Enable Advanced Network Functioinality" unchecked. I have uninstalled all the drivers and Mobile Sync software and rebooted everything. I even have tried the USB splitter. It seems to half recognize the phone in Vista but the other half is the Mobile Sync part. I do get an error on the phone that says "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer." This is sooooo frustrating as it worked one time on Vista, I think either DCD 3.0.x or maybe earlier and now it only works on XP.
What am I missing here??????
Click to expand...
Click to collapse
Go under settings/connections/USB to PC and uncheck the Enable advanced network functionality and see if that works for you on Vista.
also make sure you check your network connections, and make sure the Remote NDIS Connection (This is your Pocket PC, Smartphone) And have the IP Configuration set to automatic, as i forgot to put it back after using it as a modem for my laptop. This also prevents active sync from working.
Just a thought, as i had a similar problem, and my fix was reverting back IP settings to Automatic. Try this if you haven't
ranmasaotome510 said:
also make sure you check your network connections, and make sure the Remote NDIS Connection (This is your Pocket PC, Smartphone) And have the IP Configuration set to automatic, as i forgot to put it back after using it as a modem for my laptop. This also prevents active sync from working.
Just a thought, as i had a similar problem, and my fix was reverting back IP settings to Automatic. Try this if you haven't
Click to expand...
Click to collapse
DV8 said:
Go under settings/connections/USB to PC and uncheck the Enable advanced network functionality and see if that works for you on Vista.
Click to expand...
Click to collapse
DV8, I have tried both on and off. It seems that off will act like the PPC with it on it acts like the remote NDIS network adapter like if you want to teather it.
ranmasaotome510, If I don't select the advanced network functioinality I never get the Remote NDIS Connection to change anything. All I get is the HTC USB Sync driver under the Mobile Devices and that is it. If I check the advanced network functionality I only get the Microsoft Widnows Mobile Remote Adapter driver and not the HTC USB sync driver. Either way WESCOMM doesn't find the device.
I used the view hidden devices and removed everything I could find but I never can find this driver: Portable Devices\PocketPC to uninstall it. I have also uninstalled WMDC a couple of times and have downloaded and installed the latest. This works fine on XP with out fail. I am also using office 2007 but this did work on this Vista machine with an earlier ROM.
No clue if this is related, but I found two copies of Teredo Tunneling Pseudo-Interface in device manager. One was operational and the other was not. I removed the one with the yellow bang on it and plugged in my phone. Immediately Sync Center saw it and allowed me to create a connection with the phone.
Dumb luck? Maybe.
scorp508 said:
No clue if this is related, but I found two copies of Teredo Tunneling Pseudo-Interface in device manager. One was operational and the other was not. I removed the one with the yellow bang on it and plugged in my phone. Immediately Sync Center saw it and allowed me to create a connection with the phone.
Dumb luck? Maybe.
Click to expand...
Click to collapse
Thanks for the try, I don't have that driver installed. I had IPv6 not checked and thought maybe that was it but no joy. Any other ideas out there?
jambrose said:
Thanks for the try, I don't have that driver installed. I had IPv6 not checked and thought maybe that was it but no joy. Any other ideas out there?
Click to expand...
Click to collapse
This is just a shot in the dark, but have you tried any of the wireless sync options - either bluetooth or IR? I know that they aren't quite as fast or reliable, but it may be worth a shot.
Ivan
btonetbone said:
This is just a shot in the dark, but have you tried any of the wireless sync options - either bluetooth or IR? I know that they aren't quite as fast or reliable, but it may be worth a shot.
Ivan
Click to expand...
Click to collapse
Bluetooth is my next try. I am thinking about this USB bluetooth adapter, any suggestions? http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3399853&CatId=909
scorp508 said:
No clue if this is related, but I found two copies of Teredo Tunneling Pseudo-Interface in device manager. One was operational and the other was not. I removed the one with the yellow bang on it and plugged in my phone. Immediately Sync Center saw it and allowed me to create a connection with the phone.
Dumb luck? Maybe.
Click to expand...
Click to collapse
Hello all together,
some days ago I have bought a new S710 Vox phone and had no luck with synchronizing it with my Vista PC. Same problem as jambrose.
Then I read the posting about Teredo Tunneling-Adapter, deleted it from my system, rebooted the PC and surprise, the connection to my Vox works fine. Thank you!
Greetings to all
Johnweb_62
Johnweb_62 said:
Hello all together,
some days ago I have bought a new S710 Vox phone and had no luck with synchronizing it with my Vista PC. Same problem as jambrose.
Then I read the posting about Teredo Tunneling-Adapter, deleted it from my system, rebooted the PC and surprise, the connection to my Vox works fine. Thank you!
Greetings to all
Johnweb_62
Click to expand...
Click to collapse
So where did you find the adapter at? In the device manager under network?
Anyone?
jambrose said:
So where did you find the adapter at? In the device manager under network?
Anyone?
Click to expand...
Click to collapse
Yes, I found it in the Device Manager under Network.
But, this works only few days. My PC normaly runs all around the day und so it works until yesterday when I had to reboot my system because I had installed a software update. After this reboot the S710 has the same problem again. Even the Teredo Tunneling Adapter is still not there.
I am , any other idea?
Johnweb_62
DV8 said:
Go under settings/connections/USB to PC and uncheck the Enable advanced network functionality and see if that works for you on Vista.
Click to expand...
Click to collapse
Worked for me, Thanks!
HELP!
HELP!!!!!!!!!!!!!!!!!
I cannot get this resolved to save my arse!
I have tried EVERYTHING...just spent 3 hours looking up stuff, and re-reading to try and find something.
What the problem is:
My Verizon XV6800 connects to my Vista laptop, but does not OPEN up WMDC. If I have "Advanced Function" unchecked, then my laptop finds my ppc when connected, but does not open up WMDC. On my phone, a little connection icon goes in the bottom tray. Other times, I get the "you do not have active sync 4.5 installed" error.
What I've tried:
Uninstalling/reinstalled
net localgroup add administrators etc.
I am at a loss.
I just want to sync my Mogul with my Vista Laptop, so that I can install apps and sync email! UGH!
Any help would be greatly appreciated.
Do you have a firewall running on your laptop? I had trouble connecting also since I have BitDefender running. I had to open up some ports to get it working. Also, prior to connecting the USB, I would exit the ActiveSync process. The connection will start a new instance of it automatically.
Hi,
Why Win7 show an error when connected my HD2 to PC?
Anyone know how to fix this problem?
Thanks for your big help.
Do a search of this forum (Leo) on connecting the HD2 with Windows Mobile Device Center. You will find quite a few suggestions and some solutions to your problem. One of them should work for you.
Easy: Use Windows Update when installing the driver (let windows update get the driver for you) and it will download the correct drivers including the Mobile Device Center.
d3l1 said:
Easy: Use Windows Update when installing the driver (let windows update get the driver for you) and it will download the correct drivers including the Mobile Device Center.
Click to expand...
Click to collapse
I did it...
but still cannot pair with my HD2...
Any idea?
kayzee said:
I did it...
but still cannot pair with my HD2...
Any idea?
Click to expand...
Click to collapse
Have you installed ActiveSync on your PC?
Tubgirl said:
Have you installed ActiveSync on your PC?
Click to expand...
Click to collapse
I installed windows mobile device center
I'm having a similar problem with Win7 32 bit (but only on my home Quad Core PC- the Office Win7 PC works fine!)- it won't connect in RNDIS mode.
Try connecting in simple mode- go Settings/Other/USB to PC and make sure the 'Enable faster data synchronisation' box is UNchecked.
This may well kick the connection into action- works on mine, but still won't connect in advanced mode.
It might well be your firewall that's the problem. In my case, ESET Smart Security, it is. I also have to disable 'Enable faster data synchronisation' to synchronise with ActiveSync. The unrecognised (or blocked) rndis drivers also mean I can't update the HD2 rom on my own PC.
If anyone finds a good solution it's welcome.
NeilM said:
I'm having a similar problem with Win7 32 bit (but only on my home Quad Core PC- the Office Win7 PC works fine!)- it won't connect in RNDIS mode.
Try connecting in simple mode- go Settings/Other/USB to PC and make sure the 'Enable faster data synchronisation' box is UNchecked.
This may well kick the connection into action- works on mine, but still won't connect in advanced mode.
Click to expand...
Click to collapse
I unchecked the box and W7 PC found the HD2 and Windows Mobie DEvice Centre worked. I then checked the box and it still works.
hx4700 user said:
I unchecked the box and W7 PC found the HD2 and Windows Mobie DEvice Centre worked. I then checked the box and it still works.
Click to expand...
Click to collapse
Thats good
I wasn't so lucky- eventually had to go into the PCs device manager and delete the USB Root Hub entries. These are then reloaded fresh at the next startup and the correct driver installation kicks in All OK now!
same problem here, i unchecked the fast data synch and now it goes from not recognize RNDIS from "generic serial"
NeilM said:
I'm having a similar problem with Win7 32 bit (but only on my home Quad Core PC- the Office Win7 PC works fine!)- it won't connect in RNDIS mode.
Try connecting in simple mode- go Settings/Other/USB to PC and make sure the 'Enable faster data synchronisation' box is UNchecked.
This may well kick the connection into action- works on mine, but still won't connect in advanced mode.
Click to expand...
Click to collapse
Thanks - this solution worked for me. And likewise when I REcheck the box the connection fails again.