Related
I bought myself a a qtek S100 a few weeks ago and it's been working fine up until today
Today I sended a file via Bt from my Nokia smart phone to the Qtek so that I could dowload it to the computer faster via USB cable. The file was 764k real player video. Anyway after the transfer ended the Qtek started acting funny...is started by geting slow and slower and slower ... the cable was already pluged and the connection set so I tryed to acess it via PC...no sucess.
I unpluged and did a reset, thought that would solve the problem...
When I tryed to sync after the reset it showed an error message on the PC saying "Critical Communications Services have failed to start. Try reseting the mobile device and start again" Well I did...and also dowloaded MS Active Sync 3.8 and instaled it again.
The outcome was still the same...."Critical Communications Services have failed to start. Try reseting the mobile device and start again"
Anyone ever experienced this? How can I solve this?
Eheheh go easy on me kinda noobish here
Rom version:1.12.00 WWE
Rom Date 05/28/005
Radio Version 1.13.00
Protocol version 1337.43
ExtRom Version: 1.12.135 WWE
Mem Card King Max RSMMC 256
Thxs
Here's the follow up just in case anyone will have the same problem...
As it turns out the problem wasn't in the Pocket Pc...although the error message in windows (Pc) asked for a reset of the PP, the problem was actually in PC. It seems that somehow the Antivirus (Bitdefender with integrated firewall) started detecting the usb cable connection with the PDA as an internet connection, and althought I had authorised it the High level of security imposed by the Firewll and it's rules on the Pc enabled the connection but disabled any kind of exchange between the computer and the PDA. Well to put it plain and simple...active sync would start and everything went smoothly up until trying to open the pocket PC for file browsing...then the antivirus would kick in and wouldn't allow data tranfer as it would consider it harmfull for the computer...hence the error message.
ehehe Problem solved ...hope this helps the next one that has the same prob. :shock:
Hi Guys,
I think I have bricked my brand new O2 XDA ORBIT coming from Germany. The seller told me it was sim-unlocked, I immediately connected to the PC and started the file:
PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
Waited for the message on the screen and after it finished I hard reset BUT it is stuck on the O2 logo, with some red informations written :
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
but nothing else, the device don't go further
I've tried to install another ROM like ART_HTCWWE_11240501_026790_WWE_Ship, but when I launch ROMUpdateUtility.exe it says that no device connected.
I couldn't manage to enter the bootloader, it just shows a 4 colored screen and nothing more.... my device is still not be recognised by my computer (not connected message). I tried your C3v2Unlock tool but it says the same : NOT CONNECTED.
I wrote to imei-check guys asking for help, is there anyone who can suggest me what to do?
Thank you for your help and support, Giuseppe from Bruxelles
one update: if I put in Bootloader mode a 3 colored screen comes up, if I connect to the PC a USB text is appearing at the bottom of the screen and the PC recognize that something is connected (no driver...)
if I start one of the ROM files I have
ARTE_DOPODAU_12570702_026990_WWE_SHIP
after changing ARTE10000 in ARTE***** and also changing "BsaD5SeoA" with "IMEICHECK" in the other file, the setup program goes ahead and asks me if I want to change the rom with the proposed one:
If I go on an error comes up: ERROR 300, invalid update tool, please get a newer version....
Any idea on the next steps?
Thank again
don't worry. Look this:
http://forum.xda-developers.com/showthread.php?t=296187
enter in bootloader mode and install this rom art_tmouk_11311001_024990_wwe_ship
byeee
Thanks for the hint, the rom you told is the only one who sarts the updating but it hangs on 3%...what can I try more?
change ARTE1***** to ARTE***** because orbit is arte200.try
peppepep said:
Hi Guys,
I think I have bricked my brand new O2 XDA ORBIT coming from Germany.
.........
Provide more information about what is happening/
1. Deactivate USB activesync connection.
2. Go to bootloader.
3. Connect USB cable/
4. Start mtty.
5. Type set 32 command.
Post output here.
We can try to fix it.
regards,
Click to expand...
Click to collapse
fdp24 said:
peppepep said:
Hi Guys,
I think I have bricked my brand new O2 XDA ORBIT coming from Germany.
.........
Provide more information about what is happening/
1. Deactivate USB activesync connection.
2. Go to bootloader.
3. Connect USB cable/
4. Start mtty.
5. Type set 32 command.
Post output here.
We can try to fix it.
regards,
Click to expand...
Click to collapse
whot mean "type set 32 command"????
Click to expand...
Click to collapse
The ROM art_tmouk_11311001_024990_wwe_ship.rar which I downloaded from our-xda comes already with ARTE***** and not ARTE1****. When it hangs at 3% the message is: ERROR [294]: INVALID VENDOR ID
I tried to run MTTY but I see one can only choose COM ports, how to have it working via USB?
Any hint is higly appreciated.
Giuseppe
Please read my previous post.
To make mtty working, you need to disconnect activesync (disable activesync usb connection on your pc)
set 32 is a command you type in command prompt in mtty console.
regards,
OK, I downloaded another MTTY and I have managed to get this result:
set 32
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SD clock to 24MHz
***** user area size = 0x1E3E0000 Bytes
SDInit---
SDInit OK
And now...?
same problem
I have same problem with my o2 xda orbit.
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.27.0.0
....updating but it hangs on 3%...
pls help
sos
hi,guys
why no one answer us? is it difficult?
best regards,
Yang
peppepep,
i think i can recover your device.
regards,
find me on icq.
same problem
i have exactly the same problem as Yang...
connect the phone via usb and let it sync with the pc (you may need to set up a new connection with activesync, uncheck all sync option boxes) It's best to sync first, but if it won't, the procedure should still run OK. Now run C3v2Unlock.exe from imeicheck
http://www.imei-check.com/C3v2Unlock.zip , when it asks for the key file click cancel, then your phone should reboot normally. This worked for me, give it a try.
And also when you flash an O2 Orbit you need to follow carefully the imeicheck instructions for this model, it's not the same as for the artemis or MDA C3
still have problem
Dear Willyfxp,
I do it as you said:
connect the phone via usb and let it sync with the pc (you may need to set up a new connection with activesync, uncheck all sync option boxes) It's best to sync first, but if it won't, the procedure should still run OK. Now run C3v2Unlock.exe from imeicheck
http://www.imei-check.com/C3v2Unlock.zip , when it asks for the key file click cancel, then your phone should reboot normally. This worked for me, give it a try.
And also when you flash an O2 Orbit you need to follow carefully the imeicheck instructions for this model, it's not the same as for the artemis or MDA C3
Windows Display as following:
starting unlock....
detecting device....
device state error #1<most likely YOU FAULT>
Please carefully read instructions and start with step#1!
<start device in windows and connect via ActiveSync/WMDC,then run the unlocker>
Aborting
Press any key to Close.
My device only can go to 3 colored interface.
still have problem.
thanks
Yang
Sim-unlock phone
I believe my phone is Sim-unlocked. I could use O2-germany Sim card and China-Moblie Sim card before flashed my device Rom.
Share with us
Dear fdp24,
If you have solution.pls share with everyone!
thanks,
Yang
yangping said:
I believe my phone is Sim-unlocked. I could use O2-germany Sim card and China-Moblie Sim card before flashed my device Rom.
Click to expand...
Click to collapse
It has nothing to do with ROM Flashing - U have to be SuperCID - its different "lock". I hve O2 Orbit-UK, i got it simunlocked, but it wasnt superCID unlocked. So i paid GBP20 to imecheck
Willyfxp said:
connect the phone via usb and let it sync with the pc (you may need to set up a new connection with activesync, uncheck all sync option boxes) It's best to sync first, but if it won't, the procedure should still run OK. Now run C3v2Unlock.exe from imeicheck
http://www.imei-check.com/C3v2Unlock.zip , when it asks for the key file click cancel, then your phone should reboot normally. This worked for me, give it a try.
And also when you flash an O2 Orbit you need to follow carefully the imeicheck instructions for this model, it's not the same as for the artemis or MDA C3
Click to expand...
Click to collapse
this is not going to work, because imei-check is loading fake bootloader from windows mobile, but you are in bootloader mode. binary will not load on your device, you won't be able to change CID. even if you would, it would be useless, because you need .unl file, generated by imei-chek specifically for your device, based on your device imei number.
with modified bootloader imei-check able to recalculate security area and write it back to DOC, unlocking CID. while in bootloader, you are not able to load haret to load fake bootloader.
it depends case by case. it is not always 100% possible for me to recover device. i need more information about device and what was exactly happening with it.
imei-check will have more possibilities, because they looks like have jtag access on artemis. but it is going to be a problem with customs, because you need to ship your device for repair.
regards.
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
miriedl said:
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
Click to expand...
Click to collapse
Update UPSL v0.1 by Pof
Link here :
http://forum.xda-developers.com/showthread.php?t=311403
And try again..!
Cheers...!
Hmmmm.
What do you mean with:
Update UPSL v0.1 by Pof
Michael
Pof is a user
UPSL is an unlocker utility so you can flash alternative ROM's
check the link - very informative.
reflashing your phone usually takes a weeks worth of reading if you care for your device.
And read it :
http://forum.xda-developers.com/showthread.php?t=312052
maybe it help you..!
Is there an easier way to explain this - Sorry i'm quite good working with my PC, but this was a bit greek:
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemi d=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release
That explination is about as clear as it gets in 'phone talk'.
Perhaps elaborate a bit on what is exactly, or what step is, throwing you off.
Windows XP
Hi again.
Would i solve the problem if i just installed it from an Windows XP machine at work?
One final thing - Do you know if the GPS will still be working afterwards.
Have a good night from Oslo - Norway
Kind regards
Michael
Hi to all in this forum.
I have one T-Mobile MDA Compact II PM200. In this forum i hound that his name is Charmer. I try to unlock it with Lokiwiz03a. Program give me a code but device says that code is wrong. I try with other software to unlock it and after that mobile work with SIM card but no signal
I reflash mobiele with WM6 founded her in the forum, not it have English (before have German) but again no signal. I try now to unlock it with Lokiwiz02a and choose CID unlock. Again no signal.
When device in Automatic search mode no found network. If in Manual mode found but unable to register in network. When i put mobile to my computer speakers no outgoing signal from mobile that's not normal.
What is the problem ?
Can onyone help me with information ot needed software ?
In moment mobile information is:
ROM version: 10.2.0.8 WWE
ROM date: 2/03/07
Radio version: 01.12.20
Protocol version: 4.0.13.23
Identity:
Model No.: WIZA200
Platform: PocketPC
IMEI: 35703700051525500
Hardware:
CPU: OMAP850
Speed: 195 MHz
...
I try to found information about this problem here in forum but w/o result.
10x in advance
Did you try to flash a new radio? 2.69 or 2.19?
No.
I found this files:
BREEIMG.zip
breeze.zip
inside breeze.zip are:
SSPL.exe
spl
breezessplv1.nb
inside BREEIMG.zip is:
BREEIMG.nbh
is this needed files for radio flashing ?
if not then what files I need to try with other radio version ?
I download Radio from ftp on this form for Prophet. And try with Prophet_G4_RadioRom_v2.47.11 but now mobile not start. Go to splash screen and after few seconds restart.
I try to put it in bootloader mode but ActiveSync can't make connection and for that flash software can't wreit new radio or flash into mobile.
I ry with:
1. dowenload this t-mobile official rom (http://www.tm-phonedownloads.com/files/RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship.exe)
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!
but ActiveSync can't make conection.
?
If you are in bootloader Active Sync wont make a connection. Just plug in the usb cable into your phone while in bootloader and run RUU.
Cheers,
vlodeck.
I try with this 2:
1. T-Mobile official rom RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
2. Prophet_G4_RadioRom_v2.69.21
T-Mobile official rom RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
===================================
inside are this files:
EnterBootloader.exe
nk.nbf
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Prophet_G4_RadioRom_v2.69.21
========================
inside are this files:
EnterBootLoader.exe
nk.nbf
ROMUpdateUtility_G4.exe
RUUGetInfo.exe
RUUResource.dll
phone not start normaly. just start and after 5sec restart. i put it in Bootloader mode (press Camera, Power_buton and Reset. then release Reset and after few sec. mobile goto in Bootloader mode). when conect USB cable ActiveSync not find mobile and this file not make upadte/conection: ROMUpdateUtility.exe and ROMUpdateUtility_G4.exe
if I try to start RUUGetInfo.exe windows says that this is not valid Win32 application.
then what RUU to start ?
how to flash other Radio into this mobile or to reflash it again to be alive ?
anyone will help me for my problem ?
in moment when i start my pocetpc it displays:
IPL 1.12
SPL 1.12.0000
OS 10.2.0.8
the row GSM .... missing.
in moment i can't make connection with ActiveSync. then how to flash again mobile ?
now i try to flash it with RUU:
http://www.tm-phonedownloads.com/download_manager_mda_com2.html
http://www.t-mobile.de/downloads/?r...ku3.3_38222_382117_026921_tmo_de_ger_ship.zip
but it gives a error
i try with this:
http://www.my-audio.net/xda/Univers...s/Universal_Upgrade_v1.30.68_radio_1.09.0.zip
but when software start flashing says that this Utility is not for my device and to find right
?????
I'm guessing that this universal radio upgrade is for universal
Download this:
http://www.mobione.pl/pliki/ruu_252_eng.zip
Extract it, copy the .nbf of the rom you want to upgrade your device with to the extracted RUU folder. Once copied - run RUU.
P.S. The problem with your device is that you have upgraded wm6 on 1.xx bootloader. Thats why the system doesnt start. If the method I described above doesnt work. Post me.
Cheers,
vlodeck.
now i can bootloader mode,
i did it but got this error while i upgrade my rom to newest rom 3.3...
i got this "invalid command 326": please check your NBF data, this NBF data cannot be used for your PDA Phone.
hi again to all
after long time i try to play agian with this brick-PM200 that haven't signal.
last time (before more 2 years) i write ROM and after that PM200 not start, only in Bootloader mode (3 color lines).
today i revive it when flash this:
HTC_charmer_upgradeut_noid.rar
(
EnterBootloader.exe
nk.nbf
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
)
PM200 start, in begin fave full signal. after 30-40 seconds signal gone (but not test in/out call). i try to restart mobile, try hardreset, try manual search on operator - all no result.
on start i put near radio but power amplifier not work. i think that this is harware problem.
but not 100% sure.
is possible this problem to be from wrong radio settings ?
i try to write different radios for Prophet but every time get message "Invalid tool" and radio flashers stop.
i try with universal radio thata Vlodeck says but again this message.
what to do ?
before two days i repair one HTC Touch Elf100 and read that can sniff USB comunication to check Vendor ID and other ID.
but in my PM200 this not work. on Elf100 work easy like is writed here in forum.
when start wyty (or what's name is) make connections with mobile but after write:
ruurun 0
says that need password. if try with password for Elf100 not accept it.
what is the password for Charmer (PM200) ?
or if there is other way to get Vendor ID and other ID how ?
I can help you maybe. You need to downgrade to Aku 2.2 using the original utulity. Then the Radio will be downgraded too. But nobody knows the exact way on how to do that. (Maybe Vlodeck knows that?) I'll try to get it this week and tell you then.
As for the password try CHARMER. I have never been able to test it with MTTY cause I don't get in the right mode but I think the olny possibility is CHARMER. Just try it with whatever tool you want.
Hope that was helpfull
10x for answer.
next day will test password and post result.
how to downgread to aku2.2 ?
if you find solution please post it.
today i try but w/o success:
Cmd>password charmer
Cmd>ruurun 0
Cmd>getdevinfo
Invalid command : getdevinfo
For a help screen, use command ? or h
Cmd>
i try and with passwrod CHARMER. result is same.
what are commands for MTTY that supported Charmer ?
OK you have the same problem I have. You have Cmd> in the window. To get the comands and the password working you need USB> instead of Cmd>. That is the same problem I have and I don't know how to fix it.
in moment i use MTTY 1.42
before 3-4 days i repayr one HTC Touch Elf100. and this MTTY work find. no problem that write CMD not USB.
terminal show CMD> i write commands and mobile answer w/o problem.
but in my Charmer not answer.
possible reason is access password. but not sure.
There are simple comands. And for them you don't need SuperCID. I tried them and they haven't worked too. So I think there is something else with it. Maybe the Bootloader locks all comands and you need a password for that too. But I don't know about that.
@ChrBeck
you try to make SuperCID SD card to have full access to mobile. and after that to try flash it with RUU ?
next morning will try this.
p.s. now find this:
http://www.tm-phonedownloads.com/
http://t-mobile.iris-global.com
Well, we can't SuperCID and Security unlock a Charmer with a bootloader over 1.x at the moment. This is surely impossible. That won't work using a SD Card too. So I think you will not have any luck.
Hi, I hope someone out there can shed some light onto this problem. This is what I have: Orange SVP M3100; Operator: 14.123.1.614; ROM Ver.: 1.23.61.4; ROM Date: 07/13/06; Radio Ver.: 1.06.00.00; Protocol Ver.: 32.37.7010.01H.
I've downloaded and successfully (I think) flashed Hard-SPL-V7.
Bootloader used to read: HERM100; IPL-1.01; SPL-1.04.
Bootloader now reads: HERM100; IPL-1.04; HERM100; SPL-210.Olipro.
The phone still works and syncs. properly, but when I try running SPV_M3100ROMUpdate_0407, it eventually returns Error 260 (Update utility cannot connect to your PDA Phone.) This happens in Vista Ultimate and in XP Pro.
The program will go as fare as identifying the current image as Ver.: 1.23.61.4 and suggests to replace it with image Ver.: 2.11.61.1 however, when I click on OK, it puts the phone into Bootloader mode, disconnects the USB connection and unable to reconnect again. After this I have to do a soft reset and everything goes back to normal.
I'd very much appreciate any ideas to help me get around this conundrum. Many thanks.
put device into bootloader and try flashing from there, otherwise try sd card
OK, I could not flash from Bootloader either; same error message.
Extracted the SVP_M3100ROMUpdate_0407.exe onto the SD card.
Ended up with the following files: EnterBL.exe; GetDeviceData.exe; README.doc; ROMUpdateUt.exe; RUU.dll; RUUUI.dll; RUU_signed.nbh.
None of the above files will run on the PDA. What do I do next? Sorry for being such a novice and thanks again.
commnet said:
None of the above files will run on the PDA. What do I do next? Sorry for being such a novice and thanks again.
Click to expand...
Click to collapse
Correct, the files are not run from the device.
The hermes wiki has the directions for flashing from an SD card, go check it out.
Thanks for that jdc. I found the information you have suggested and here is what I did so fare:
-Formatted the SD card.
-Renamed the ROM image file to HERMING.nbh
-Inserted the SD card with the renamed image file into the phone.
-Restarted the phone and confirmed that it was reading from the card.
-Put the phone into Bootloader mode by pressing PWR+OK+Reset.
The multi-colour Bootloader screen comes up and nothing else happens. I'd tried pressing the PWR button just in case, but it had no effect.
Any more ideas? THANKS!
SPV m3100 upgrade - error 260 - connection drops when allowing enterBL.exe to run on
Hi - am going through the same process to upgrade my SPV m3100.
I've followed Mr Vanx's guides to the letter - ROM update from 1.23.61.4 to Hard-SPL-2.1 - as soon as i click 'yes' on the phone to allow enter.BL.exe to run - the connection between phone and laptop immediately drops.
I've tried using different USB ports as suggested in different threads = but to no avail
Am running Vista Home Premium.
I'm a novice so sorry for sounding stupid - any help would be really appreciated.
I had the same error until I disabled the phone lock. Worked ok after that
I had this problem for awhile, and I'm using Vista. I can't remember the problem to explain it, but I did one of 3 things to fix it.
1. Follow Mr Vanx's Vista Guide. The most important part is downloading his attached drivers and getting Vista to detect your phone as an "HTC USB Device" or "HTC USB Sync" or something like that.
2. Then I would recommend installing the official ATT Rom, you can download it off of HTC's website.
3. Install Schaps Advanced Config cab, and disable "security warnings"
After this done, you should be able to install a cooked rom from here.