I bought myself a a qtek S100 a few weeks ago and it's been working fine up until today
Today I sended a file via Bt from my Nokia smart phone to the Qtek so that I could dowload it to the computer faster via USB cable. The file was 764k real player video. Anyway after the transfer ended the Qtek started acting funny...is started by geting slow and slower and slower ... the cable was already pluged and the connection set so I tryed to acess it via PC...no sucess.
I unpluged and did a reset, thought that would solve the problem...
When I tryed to sync after the reset it showed an error message on the PC saying "Critical Communications Services have failed to start. Try reseting the mobile device and start again" Well I did...and also dowloaded MS Active Sync 3.8 and instaled it again.
The outcome was still the same...."Critical Communications Services have failed to start. Try reseting the mobile device and start again"
Anyone ever experienced this? How can I solve this?
Eheheh go easy on me kinda noobish here
Rom version:1.12.00 WWE
Rom Date 05/28/005
Radio Version 1.13.00
Protocol version 1337.43
ExtRom Version: 1.12.135 WWE
Mem Card King Max RSMMC 256
Thxs
Here's the follow up just in case anyone will have the same problem...
As it turns out the problem wasn't in the Pocket Pc...although the error message in windows (Pc) asked for a reset of the PP, the problem was actually in PC. It seems that somehow the Antivirus (Bitdefender with integrated firewall) started detecting the usb cable connection with the PDA as an internet connection, and althought I had authorised it the High level of security imposed by the Firewll and it's rules on the Pc enabled the connection but disabled any kind of exchange between the computer and the PDA. Well to put it plain and simple...active sync would start and everything went smoothly up until trying to open the pocket PC for file browsing...then the antivirus would kick in and wouldn't allow data tranfer as it would consider it harmfull for the computer...hence the error message.
ehehe Problem solved ...hope this helps the next one that has the same prob. :shock:
Related
Hello everybody,
I have a problem with ActiveSync : each time i put my phone (qtek 2020) on the craddle, it says "synchronisation error". A few weeks ago everything worked fine.
I use an USB connection, an tried it on other computers in my office: still the same error.
Made some "hard reset", downloaded and installed the latest ROM and software version (Windows Mobile 2003 SE 4.21.1088 - ROM 2.06.00WWE - Radio 1.18.00). Nothing works. I notice that my computer can browse the files on the PPC, so in fact the connexion works! Could it be a problem with Windows XP SP 2 ? I deactivated the firewall but no better results...
If anyone knows...
Cheers,
Pierre
just reinstall activesync that worked with me
You might get an error if the boxes are checked for synching contacts/appointments etc and you dont have Outlook installed on the pc. Try unchecking all the boxes and see if the error disappears.
pierrevw said:
Hello everybody,
I have a problem with ActiveSync : each time i put my phone (qtek 2020) on the craddle, it says "synchronisation error". A few weeks ago everything worked fine.
I use an USB connection, an tried it on other computers in my office: still the same error.
Made some "hard reset", downloaded and installed the latest ROM and software version (Windows Mobile 2003 SE 4.21.1088 - ROM 2.06.00WWE - Radio 1.18.00). Nothing works. I notice that my computer can browse the files on the PPC, so in fact the connexion works! Could it be a problem with Windows XP SP 2 ? I deactivated the firewall but no better results...
If anyone knows...
Cheers,
Pierre
Click to expand...
Click to collapse
use the activesync ver3.8
Hi guys
Could anyone help me in this problem??
When I connect the Jasjar to the PC through the cable it appeares this error message:
Critical communications srvices have failed to start . Try resetting the mobile device .and then connect again.
What I did as a solution:
1. Soft reset (nothing happened) same problem
2. Hard reset (it was very bad without backup) still nothing happened
3. Remove Microsoft Active Sync 4.0
4.Install Microsoft active sync 4.1 and the surprise was that same problem still last. In the other hand I can connet the I-mate PDA2K normally .
how can I FIX it please?
This is my first time
So no one want to help me OR there is no solution
Anyway thanks for whome that read it and think about it!
Whenever I connect my MDA Vario to my PC (Dell 700m) I get the blue screen of death which says there is a driver issue. Dont know what to do at all. How to delete drivers? Which drivers to delete?
I'm sure someone must have had this problem, but a search turned up nothing.
Please help =)
If u r using kaspersky antivirus you'll have to get rid of it. It was my problem. When I started using another antivirus, problem has gone.
Greetings.
Thanks for the suggestion, I tried shutting down Kaspersky but I still got the error. I can try an uninstall.
Microsoft's Crash Analysis gives me the following:
Error report summary
Error type: Windows stop error (A message appears on a blue screen with error code information)
Solution available? : No (see Next steps)
What does this error mean?: Windows has encountered an error from which it cannot recover and needs to restart
Cause: Unknown device driver
Computer symptoms: A message appears on a blue screen with error code information (for example: e.g. 0x0000001E, KMODE_EXCEPTION_NOT_HANDLED)
You have to remove kaspersky. Or sync via IR.
Wellcome
Hi, I am using Kaspersky Anti-Virus and have no problems! 8)
So there might be another incompatibility.
Do you use Active Sync 4.1 ??? The older version 4.0 came with my device and didn't work.
this is my experience, I am using ActiveSync 4.1+WinXP Pro+NOD32+Sygate Personal Firewall...
once I connected my mini s to the pc, Sygate like other firewall software asked me for permittion regarding the usb connection...I permitted for sure....
but the initialisation took more 15mins, and the screen freezed....I tried several times and it happened every time...
then I connected my old PPC (with PPC2003)to the pc, nothing goes wrong....
finally, I EXIT the firewall, quit it...not just "allow all traffic"...then the connection works smoothly......
the problem is I need to quit the firewall before I start ActiveSync...
Im using activesync 4.1, so that should be no problem.
Got it to work!!! Killing Kaspersky did the trick.
Thank you
with older versions of kav, u have to switch off lan scan.
for example, with kav 5.0.225 wks, no pb.
I was thinking of switching to Panda anyway
Thanks for everyones Help, very appreciated!
I updated the ROM and the wizard seems to be working much faster, and no more error messages.
mikeusc said:
Got it to work!!! Killing Kaspersky did the trick.
Thank you
Click to expand...
Click to collapse
Anytime
It's the Kaspersky Anti-Hacker that causes the problem, the Anti-Virus and Spam applications are fine.
I was using Kaspersky Personal Pro and I got that Blue Screen. Unninstalled it and everything work fine now.
Hi,
My Prophet has caused my PC to crash more than 3 times and I need some help.
I have read a lot of threads on the forum, but haven’t come across anything that sounds like the problem I am having.
My PC usually crashes right after I plug in my Prophet through USB or if it is plugged in, right after I unplug it.
Immediately after, I get the Blue Screen of Death with the message which references the following:-
DRIVER_IRQL_NOT_LESS_OR_EQUAL
It also has the following Tech Info.
*** STOP: 0*0000000D1(0*BA741E10, 0*00000002, 0*00000001*0*A8293BEB)
*** RNDISMPX.SYS Address A8293BEB base at A828F000, Datestamp 43584898
It seems that I do not have the correct USB drivers on my PC for my Prophet. Where can I download the most recent drivers to stop my PC from crashing?
Anyone able to send them to me?
Also, Activesync fails to recognize my PPC when it is plugged in with the USB, it goes through the sequences where it says “connecting” forever but never connects to the device.
The BT connection has been working well for me so far, but without a stable USB connection to Activesync, I cannot upgrade my Prophet to WM6.
I have turned off the firewall and install, re-installed Activesync, I have Hard Reset my device a couple of times. In the end Activesync fails to connect to my device and then I usually end up crashing my PC.
I am open to some suggestions, thanks
Prophet Specs:-
IPL:- 1.00
SPL:- 2.20.0000
ROM:- 2.20.7.34. WWE
Model:- PM 300
PC Specs:-
XP SP2
Activesync 4.1 and 4.5
Remove the drivers from the pc for the prophet, plug prophet back in and let windows sort it out for you.
Hi,
I'm trying to install hard-spl to flash my TC with wm6.5 rom that I have made with kitchen available here.
Problem: ActiveSync connection is ok, I can sync, explore etc. But when I run ROMupdateutility.exe it gives connection error 202.
I don't see any security messages about running enterbootloader.exe or anything else either which is weird, just this 202.
I have tried to change phone's "enable advance network functionality" setting, no luck.
I have 2 pc's with WinXP, other one has no internet connection, firewall or anti-virus software, getting exactly the same result with both pc's.
I have tried different usb cable, port, many many soft resets...
There's Symantec SmartPhone Security on the phone, I have disabled the auto-protect, but no luck.
Any ideas???
ERROR [202, 204] : CONNECTION
This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync before running RUU.
Have you tried a hard reset make a backup first as it removes all apps installed and data 'phone numbers text's', I think with Symantec SmartPhone Security removed as long as activesync works it should be ok.
Hi, hard reset seems to be the last way to try. I have read this forum 2 nights now and not found any other ideas :-(
Running wm6.5
Hard reset might be THE solution for many people I think.