Hi everyone!
New to this forum but got my Qtek S100 a couple of weeks ago and found an irritating bug in it..
When I use my SonyEricsson HBH-300 Bluetooth headset everything is fine until I've talked for ~7 minutes.. after that the other party doesn't hear me while I still can hear the other party.. Sometimes my mic never comes back during that call but sometimes it's back after about half a minute or so.. the funny thing is that if it comes back it goes away againg in about 14 minutes.. and perhaps 21, 28 and so on.. haven't really made that long calls with that headset because of the bug..
The headset works fine with other phones, at least SE Z1010, SE P900, Nokia 6630 etc..
And the S100 works fine with my Bluetooth GPS..
Has anyone experienced anything similar?
Have you got other bluetooth headsets, do they work for long ( +7 minutes) calls?
Cheers
/Rikard, Sweden
di7riks said:
Hi everyone!
New to this forum but got my Qtek S100 a couple of weeks ago and found an irritating bug in it..
When I use my SonyEricsson HBH-300 Bluetooth headset everything is fine until I've talked for ~7 minutes.. after that the other party doesn't hear me while I still can hear the other party.. Sometimes my mic never comes back during that call but sometimes it's back after about half a minute or so.. the funny thing is that if it comes back it goes away againg in about 14 minutes.. and perhaps 21, 28 and so on.. haven't really made that long calls with that headset because of the bug..
The headset works fine with other phones, at least SE Z1010, SE P900, Nokia 6630 etc..
And the S100 works fine with my Bluetooth GPS..
Has anyone experienced anything similar?
Have you got other bluetooth headsets, do they work for long ( +7 minutes) calls?
Cheers
/Rikard, Sweden
Click to expand...
Click to collapse
That also happened to me in the beggining after erasing the handsfree from my devices and paired it once more its running fine since then!
HI!
di7 riks.....I am using a Motorola HS810 Bluetooth handsfree with my O2 XDA II Mini and the same 7 minute problem is happening to me also. Initially it was 12 minutes but now it is down to 7. I can hear the other party but they can't and then I have to disconnect and dial again.
think I will do as katsj did...try pairing teh device again.
U
This is a known issue. Apparently, what is happening is that the device is going to sleep, and bringing down part of the bluetooth with it. The quick'n'dirty solution is to set your device to never power off, and just turn it off manually. Hopefully this will be fixed in the next round of ROM updates :?
I have an "almost" similar problem: I answer the call with the HBH-300 and talk for about 10 seconds after which I can hear nothing (the other part hears nothing also). If I close the handsfree from the MDA Compact then I can continue talking from the MDA (the call is not ended).
If I close the call and make a new call I get the same problem. But if I switch off the HBH-300 headset and switch it on again then the problem stops and in the following calls I can talk using the HBH-300.
This problem appeared only twice in the 15 days that I am using the MDA.
Obviously the phone did not power off in 10 secs (it was on when I had the problems) so the "sleep issue" mentioned previously could not have created the problem. Only the backlight goes off in 10 seconds. Do you think that the backlight might cause problems to the bluetooth?! :shock:
atsois said:
I have an "almost" similar problem: I answer the call with the HBH-300 and talk for about 10 seconds after which I can hear nothing (the other part hears nothing also). If I close the handsfree from the MDA Compact then I can continue talking from the MDA (the call is not ended).
If I close the call and make a new call I get the same problem. But if I switch off the HBH-300 headset and switch it on again then the problem stops and in the following calls I can talk using the HBH-300.
This problem appeared only twice in the 15 days that I am using the MDA.
Obviously the phone did not power off in 10 secs (it was on when I had the problems) so the "sleep issue" mentioned previously could not have created the problem. Only the backlight goes off in 10 seconds. Do you think that the backlight might cause problems to the bluetooth?! :shock:
Click to expand...
Click to collapse
I am facing both problems described here. Does anyone know of a solution?
This is a known issue, but unfortunately it is not stated on Club IMate as a known issue.
This is concerning, because I assume i-Mate Techs are not working on this issue.
Over at Howards Forums Bengalboy states if you press the devices call button twice the headset incoming audio gets reactivated. I have yet to test it, because my caller hangs up before I get the device out of the case to press the call button twice.
One of these days I will beat the clock.
1.5 years ok, way back in Oct-03 I remeber many of us scrambling about all the MS Stack issues on the MDA II/XDA II, etc, and eventually tools were developed to help the issues.
I get rid of the PDA2K, because of all it's issues. Now the PDA2K has a better ROM and a new fix for the Broadcom stack.
Oh the misery.
I pressed the power switch on and also pressed the call button twice...I dont know which worked but my call did not get disconnected after the 7th minute...
Ujj
BT headset cutting out
I have the same problem - BT headset cutting out after a limited period of time, ~10 seconds.
Same problem here, when using bluetooth headset people can't hear me after 8 minutes, pressing the green talk button twice restores the connection.
Second problem: phone does not answer call automagic with bluetooth headset. (jabra BT 200)
Third problem: no voice dialing and no possibility to hear who is calling.
Are these MS Bugs or HTC Bugs?
_________________
T-mobile compact
ROM version 1.01.00 WWE
ROM date 10/21/04
Radio version 1.00.10
Protocol version 1337.36
ExtROM version 1.01.124 WWE
For the swedish Qtek S100 this issue was solved in the latest software update (1.06).
bamse said:
For the swedish Qtek S100 this issue was solved in the latest software update (1.06).
Click to expand...
Click to collapse
This is interesting - I'm running rom 1.06.00 WWE and extRom 1.06.115. I noticed that they have a extRoom 1.06.116 there, is that the one you are running?
espenleknes said:
bamse said:
For the swedish Qtek S100 this issue was solved in the latest software update (1.06).
Click to expand...
Click to collapse
This is interesting - I'm running rom 1.06.00 WWE and extRom 1.06.115. I noticed that they have a extRoom 1.06.116 there, is that the one you are running?
Click to expand...
Click to collapse
Yes, 1.06.116 it is.
It adds another issue though, making GPRS unable to reconnect after a phone call or USB Active Sync.
Hit the power button to reactivate - not the Green call button.
I also have this problem, when the device goes back to sleep my bluetooth headset microphone no longer works. I can still hear the other caller, however i need to hit the power button (Red one on the side) to get working again.
No need to disconnect the caller.
When i press the button for opening the voice record or i open note the PDA keep on loading...on and on...and i never stop. It don't load the application. Tried to install noteM and it give me the same problem.
I've tried to change rom.
3 different 1.03 ITA - 1.12 ENG - 1.11 ITA
Nothing changes, same problems.
Help Please!!!
I wonder if it is an hardware problem
mmm when i record video with the camera app audio comes out normal and it record without problems...so i think it is not an hardware probl.
Any idea?
Do you know other apps for recording audio? So i can try them.
Hi,
Is there anyone who experienced the same before. or with an idea?
The PDA is a HTC TyTn (Hermes). It worked well for a year, and since 3 weeks there is a rather disturbing crackle noise whenever the screen is on.
A hard reset did not help.
Any advice is welcome!
Thanks.
My device is Dopod 818Pro G3 installed with WM6 fantastic b4. Have use it for 5 month
1. Recently 70% - 80% of the time when I answering or make a phone call, my Dopod 818 goes quiet (no sound at all) but at the screen the call time duration still counting and running.
2. My second problem is I can’t connect to the Wi-Fi.
All other function is working fine and never hang
Please help to solve my problems
Problem solve - dont know what happend
Hi, my problem solve. here what i did
I hard reset and soft reset more than 20 time... at the end my dopod got worse.. no sound at all ( still can run media player, audio play but no sound come out) except for incoming call... but then still when answering the call my dopod as usual go quiet. I really give up and left my dopod overnight... and suddenly this morning my dopod working fine again... i really don't know why... but at least my problem solve.
Now I'm looking software Pda Expert Pda Brilliant WM6... because this software is deleted when i do hard reset... any body know where i can download?
I have an iPAQ 610c, every time I record an audio file with any app (VITO, RESCO, windows notes, etc) it records fine until the screens backlit turns off (not the hole screen turn off, just the light) exactly in that event the recording starts to have a lot of noise like static. I already change the ROM to WM6.1 and the radio to the newest official release, .88 I think.
I contacted HP and they gived to me a new one but this one does the same thing, so this must be on all iPAQs 610c or even on all the 600 series
Give it a try
1.- set the backlit to 10 seconds (this way you'll wait less)
2.-make an audio recording with the windowsmobile notes longer than 10 seconds long
3.-play the file and listen carefully to the second 9 or 10 on the recording
As soon I have some spare time I''l upload some recordings of the problem.
Please sorry for my bad english.
same problem at mine....only thing is that mine isn't modified....original rom and radio...
wrote into HP SUpport forums....
Greets
chuck
Yes, you are right. Tested with Vito Audio Notes Touch. After backlight is turned off started strange noise bzzzz
It should be a massive attack to HP Support ))
confirmed on 612c Wm6.1
HP called me some days ago and they told me that they will do some tests to make sure there is a real problem on the unit, but after 10 days they havent called back to give me a solution.
My workaround is to use resco audio recorder and make the app turn off the screen before the backlit dims.
The strange part is that when you record a call the problem does not show up, so that makes me think that this is not a hardware problem, or it could be?
Try to record a call and post your results here.
I hope they fix this because is really annoying, I love my 610c exept for that. I think this is a good reason to be complaining.
HP called me for this and they said they will do some tests to verify is a hardware or software problem, as soon as they tell me what is it i'll post it.
this was fixed when i did a flash to WM 6.1 20270 1.4 Rev 1.2 Standard
now when i press the voice record button the screen brightness goes to full power and the screen stays on untill i stop the recording. I dont see this as a fix, bu rather a work around, i'm not sure how much battary life is lost doing it this way.
thebranded said:
this was fixed when i did a flash to WM 6.1 20270 1.4 Rev 1.2 Standard
now when i press the voice record button the screen brightness goes to full power and the screen stays on untill i stop the recording. I dont see this as a fix, bu rather a work around, i'm not sure how much battary life is lost doing it this way.
Click to expand...
Click to collapse
is there a way to ad this fix to another ROM? a cab or something? I have WM6.1.20273 ESN made By NiZuZen but is has the bug.
sorry i dd not cook this room and i dont know what changes were made to create it. This rom was made by Yevg001.
I did notice i had a "HP call waiting Tone fix", "Arcsoft Codec Plugin" and "IAC Corp BSPropCab" listed in my remove programs that i did not install. These were included with the rom and possibly fixed the recording issues.
those programs are part of hp patches being installed after clean boot by customization engine (OS v1.01.04 update and call waiting fix)