Database Users

Cant boot anymore

Hi folks, i'm looking for 2 days a way to solve my DHD problem:
It can't boot anymore. It pop up the "htc quietly brilliant" screen, play the boot sound and, start this step again, and again, and again...
So I'm googling a LOT about how to solve this, if exist a way to restore the original rom. Because i'm thinking that was the problem, my original rom is gone.
That happens when i try to install 3 softwares from appbrain, my device got freeze and i hit the power button to reset. So, after that, my device is gone.
So i came here, to ask you folks: There is a way to recover the original rom ? Without send to warranty (because it spend something like 1 month here).
I'm not a mobile hacker or something, i'm just trying to be happy with my device.
Thanks a lot and sorry for my poor english!!

Perhaps try booting to the bootloader, by holding Power + Volume down button. From there, you should be able to do a factory reset, which may or may not fix your problem. Worth a shot at least, imo

And if it does not work when you do a factory reset, you can use a rom.zip from HTC RUU to restore your phone.
Now the important thing is to know which HTC rom you are running. If it is unbranded, 1.72.405.3 is a sure shot. Download the RUU.exe from Stock roms thread in android development subforum, and run it. When the window pops up, open run prompt, and type: "%TEMP%". Then search for rom.zip, copy it to your desktop, rename it to PD98IMG.zip and put it to your SD card (I hope that you have a card reader). Then just reboot to bootloader as tmh described, and watch the magic happen
Then if your phone is branded, you can still use the same technique to make PD98IMG.zip, but you have to get the RUU that matches your branding. There are lots of RUUs in android development subforum, just search.

Hi guys,
thanks a lot for quik reply!
I perform the procedure indicated by tmh, but without lucky ;\
I think it is unbranded. I buy it at Portugal and i'm using at Brazil right now.
I'll perform your tip jkoljo.
I'll post a repply to let people know if it works or not.
Thanks a lot!!

Hope the advice the last guy gave helps , a factory re set may work fine and fix the issue. Iv had 3 dhd since the day of release , the second one I had wouldn't switch on, had it replaced by Vodafone . Not sure weather or not they will give you a new one . Hope u get it fixed
Sent from my Desire HD using XDA App

I'm not sure if i got cover from warranty.
Right now, my "PROOF OF PURCHASE" is at europe, and i'm at america, so i must get this work again by myself, or pay (some expensive value, i think) for htc support.
I found those ROM version:
RUU_Ace_HTC_WWE_1.72.405.3_R2_Radio_12.28e.60.140f_26.04.02.17_M2_SF_release_163262_signed.exe 04-Jan-2011 12:41 285M Windows executable file
RUU_Ace_HTC_WWE_1.72.405.3_R_Radio_12.28e.60.140f_26.04.02.17_M2_release_161342_signed.exe
but i'm not sure about "WWE". What it means?

dogasantos said:
I'm not sure if i got cover from warranty.
Right now, my "PROOF OF PURCHASE" is at europe, and i'm at america, so i must get this work again by myself, or pay (some expensive value, i think) for htc support.
I found those ROM version:
RUU_Ace_HTC_WWE_1.72.405.3_R2_Radio_12.28e.60.140f_26.04.02.17_M2_SF_release_163262_signed.exe 04-Jan-2011 12:41 285M Windows executable file
RUU_Ace_HTC_WWE_1.72.405.3_R_Radio_12.28e.60.140f_26.04.02.17_M2_release_161342_signed.exe
but i'm not sure about "WWE". What it means?
Click to expand...
Click to collapse
the different is just the radio version. just try flash one of them and see if that work.

WWE means World Wide English, which is an international release
Any one of those RUUs you linked is ok, as hedayat7 already said.

WWE is World wide English...so both are english Roms...try the RUU flash, it should work like a dream....

jkoljo said:
Download the RUU.exe from Stock roms thread in android development subforum, and run it.
Click to expand...
Click to collapse
Sorry ask for your help again, but at Official thread (thread number 841207) for DHD files, both 1.72.405.3 links are broken.
So i search for another thread, and found another one, but when i run the .exe, it ask for a USB connection to device, so it appears wrong.
Could you gimme a hand to find the correct file?
PS: I can help with a web hosting to all correct files.

You probably found the correct RUU, now proceed to %TEMP% and copy rom.zip to desktop.
You can find RUUs here: http://xdafil.es/index.php?path=DesireHD/RUU/
I am not completely sure if those zip files are actual rom.zips, you can check that. Open up the zip, and if it has a long list of hboot, system, android-info.txt etc, then it is rom.zip and you can just go ahead and rename it to PD98IMG.zip.

jkoljo said:
You probably found the correct RUU, now proceed to %TEMP% and copy rom.zip to desktop.
You can find RUUs here: ...
I am not completely sure if those zip files are actual rom.zips, you can check that. Open up the zip, and if it has a long list of hboot, system, android-info.txt etc, then it is rom.zip and you can just go ahead and rename it to PD98IMG.zip.
Click to expand...
Click to collapse
But i did that.
The "1.72.405.3" files at this URL are broken (Or need password to access it, because "You don't have permission to access" message pop up).
When i run the RRU i got two screens, first i must accept a advice, the second one ask if I have a USB connection to my device. Even when i proceed to next step, i got no .zip file on my %TEMP%.
Im lost because of that lol
UPDATE: OK I FOUND IT! haha ty

Thanks a lot my friends,
but it doesn't work.
I perform the process for 2 different roms, and it doesn't work.
Still can't boot.
I'll sent for warranty and wait a loooong time..
But thanks a lot for help me with this!!

Ok, then there is something wrong in the device itself. You have to send it to a service center.
Sent from my Desire HD using Tapatalk

Hi again,
i keep a little hope that i can restore my phone, so i found a possible solution:
OTA update.
At "showthread.php?t=667728&page=2", i found a guy with the same problem i think, here is the quote:
Kinma said:
I had the same problem last week.
I suspected it had to do with the EXT3 partition.
Solved it by first flashing the OTA 2.2 ROM (for rooted users) as this does not use the EXT3. Then used Rom manager to recreate the EXT3.
Now all ROMs that use the EXT3 run fine!
Click to expand...
Click to collapse
(thanks Kinma for the feedback)
So, i start a search for OTA update file here, and found at "showthread.php?t=885996".
But when i choose "Apply sdcard:update.zip", i got INVALID OPERATION.
Someone have a tip for me about this?
Thanks (its very sad, but i must keep hope).

dogasantos said:
(thanks Kinma for the feedback)
Click to expand...
Click to collapse
You are welcome.
What happened was that after a reboot of the phone the phone started rebooting in the boot sequence, i.e. a boot loop.
I tried a lot of things and nothing worked.
Finally I suspected that the problem might be with the SD card. I had a backup, so I had no problem doing a factory reset.
Then I booted the phone without the SD card.
The phone booted fine.
That way I was certain that the problem was with the SD card.
I had 2 partitions on the SD card, an EXT3 part and the rest was a normal Fat part.
I could still read the card, so I made a backup of all the data on the card.
Then I reformatted the card using windows.
The phone booted fine with an empty, reformatted, SD card.
Since I use Apps 2 SD, I had to recreate the EXT3 partition.
If your rom does not use this, you do not have to do this.
After recreating the EXT partition, put back all files that I want on my SD card.
My advice would be to do a factory reset and after that boot the phone without the SD card.
If the phone boots, you know the problem is with the card.
Hope that helps; good luck!

dogasantos said:
Sorry ask for your help again, but at Official thread (thread number 841207) for DHD files, both 1.72.405.3 links are broken.
So i search for another thread, and found another one, but when i run the .exe, it ask for a USB connection to device, so it appears wrong.
Could you gimme a hand to find the correct file?
PS: I can help with a web hosting to all correct files.
Click to expand...
Click to collapse
Here, use this link:
http://forum.xda-developers.com/archive/index.php/t-899564.html
From "football" post copy and paste his link, the download would start immediately..

Hi folks,
boot without the SD card, doesn't work =(
I'm really without luck with this.
I do:
- Factory reset
- Clear cache and userdata
- Boot without SD or/and SIM cards
- Reflash RUU WWE 1.72.405.3 Radio 26.04.02.17_M2
- Reflash RRU WWE 1.72.405.3 Radio 26.04.02.17_M2 SF
- erase all SD
One show was use OTA update.zip, but at this step i got "invalid operation"
SO, nothing works!
Well, it appears a lost battle =\
thanks folks for all help.

Yeah, there must be something wrong in your device itself, for example a motherboard fault. Send it back to HTC.

yukinok25 said:
Here, use this link:
http://forum.xda-developers.com/archive/index.php/t-899564.html
From "football" post copy and paste his link, the download would start immediately..
Click to expand...
Click to collapse
Hi,
I found the information extremely useful. Big Thanks
GRuti

Now I have 7704 rom!

I hope this rom can hlep us make the DVP best!
I am so excited that is 7004
Thank for every one
I hope someone sotp the spread of this rom without my permission！！！
IF you want to knew more about DVP you can gou to [email protected]/forum-27-1.html
You can also join the QQ GROUP 193983101,i can help you with dvp

It seems I have 7720...
Are you talking about ATT DVP?

snailium said:
It seems I have 7720...
Are you talking about ATT DVP?
Click to expand...
Click to collapse
sure
you can use it to make your phone back to 7004 and Jailbreak your phone

From opening up the rar, the file mentions:
"US_TMO_SIGNED"
Is there a different ROM for each US carrier?
In other words, the Venue Pro appears to be sold in the US only as an unlocked device, but there is a version for AT&T bands and a version for T-Mobile bands. Is the ROM the same for both, so this would work for both?

jhoff80 said:
From opening up the rar, the file mentions:
"US_TMO_SIGNED"
Is there a different ROM for each US carrier?
In other words, the Venue Pro appears to be sold in the US only as an unlocked device, but there is a version for AT&T bands and a version for T-Mobile bands. Is the ROM the same for both, so this would work for both?
Click to expand...
Click to collapse
ALL DVP can use this rom

So is this ROM the missing link we needed to hack the DVP or do we gain nothing lol

We need a full image dump and not a backup file. And yeah. This is likely the only way to hack the phone.

MJCS said:
We need a full image dump and not a backup file. And yeah. This is likely the only way to hack the phone.
Click to expand...
Click to collapse
isnt "webseraph" claiming this to be the Image?

raiderfan247365 said:
isnt "webseraph" claiming this to be the Image?
Click to expand...
Click to collapse
From what I saw, it's an .ffu file, which it's my understanding that this is a full firmware image.

I would need the link again to verify but last time it was a backup.

Does this mean .....
MJCS said:
I would need the link again to verify but last time it was a backup.
Click to expand...
Click to collapse
Hey guys, does this mean I can unbrick my dvp ?
It's been sitting there for ages and I have went out to buy a omnia 7 but I really love the phone.... .... please keep me posted and tell me how to upload the image onto the phone so I have a working firmware again ^_^.
PM me or whatever ^_^
I'm so excited, DVP is no longer a dead phone and can have developments ^^

hihi2u2 said:
Hey guys, does this mean I can unbrick my dvp ?
It's been sitting there for ages and I have went out to buy a omnia 7 but I really love the phone.... .... please keep me posted and tell me how to upload the image onto the phone so I have a working firmware again ^_^.
PM me or whatever ^_^
I'm so excited, DVP is no longer a dead phone and can have developments ^^
Click to expand...
Click to collapse
does anyone have the image file and can post it to a standard upload service (mediafire, fileserve, etc.). webseraph where did the link go?

I've got it saved on my computer at home, I can reupload it later tonight if people still need it by the time I get home. It came with a bunch of Eastern-language files, Chinese or Japanese I believe, old versions of x86 Zune software, old versions of x86 drivers, and the .ffu file.
Since I believe the .ffu is the ROM itself (hopefully not a backup, I don't know much about this stuff and my Dell Venue Pro that I decided to order is still with Fedex), I'll just upload that, and anything else can be sourced at a million other locations.

Thanks ! !
jhoff80 said:
I've got it saved on my computer at home, I can reupload it later tonight.
Click to expand...
Click to collapse
Thanks, looking forward to it ... ... btw can you give some guidance as to how to flash the phone with the firmware ?

hihi2u2 said:
Thanks, looking forward to it ... ... btw can you give some guidance as to how to flash the phone with the firmware ?
Click to expand...
Click to collapse
I updated my previous post, I've got no idea. The instructions weren't in English and I don't even have a WP7 device (yet). I believe it would involve using UpdateWP.exe though.

cheers ^^
jhoff80 said:
I updated my previous post, I've got no idea. The instructions weren't in English and I don't even have a WP7 device (yet). I believe it would involve using UpdateWP.exe though.
Click to expand...
Click to collapse
It'll be nice to have a look at it anyways, thank you sooooo much !

Can you upload the file somewhere? I would like to disect it.

Here's a repost of only the .ffu from the original post:
http://www.multiupload.com/5YT27EHLZV
The original rar also contained instructions in Chinese, plus other folders:
1 start, which included the VC redist files
2 Zune 4.7, (x86 only)
3 ZuneDesktop UpdateTool 1404, (x86 only)
4 Tool FFU _FinalCheck_CheckPVK, which I believe is just a wrapper to run the UpdateWP.exe command I mention below. If anyone wants this folder too, let me know.
5 FFU-Deploy, which contained only the .ffu file I zipped up and reposted.
From my brief research into the matter, it appears that you can use Zune 4.7 with an older UpdateWP.exe with the following command:
UpdateWP.exe /ffu <filename>
Zune 4.7 and the older UpdateWP.exe are available all over so I didn't bother uploading those.
Machine translation of instruction file:
Brush process
Computer system XP SP3 (win7 system similar)
By folder order in 1234 to install
A: Click the folder to install the three files in 1 start
B: Download and install this zune4.7 me
C: install about 3 ZuneDesktop UpdateTool 1404 folder in the Setup-UpdateWP-x86.exe
D: Open the folder 4 Tool FFU _FinalCheck_CheckPVK in the file FFUDownload_ShareU.exe,
Tap Browse, find the 5 FFU-Deploy folder of the Rom file
Then began to brush machine,
1 cell phone off, remove the battery
2 believe the key to holding down the data cable to the computer
3 Wait a moment, the computer will automatically find the drivers. (Note to zune off, preferably in the Task Manager in the zune process off)
4 drive automatically installed after the point about brush machine software in the download, and then will begin to brush machine, brush machine program into the background of green.
After a good brush, the phone will automatically restart, like, Brush some tips that appear on the software window, all the way to determine the fine.
Brush, do not pull the data line.
Click to expand...
Click to collapse
Again though, this isn't my file, and I haven't tested it, so don't blame me if something goes wrong.

time to do some reading ^^
jhoff80 said:
Here's a repost of only the .ffu from the original post:
http://www.multiupload.com/5YT27EHLZV
The original rar also contained instructions in Chinese, plus other folders:
1 start, which included the VC redist files
2 Zune 4.7, (x86 only)
3 ZuneDesktop UpdateTool 1404, (x86 only)
4 Tool FFU _FinalCheck_CheckPVK, which I believe is just a wrapper to run the UpdateWP.exe command I mention below. If anyone wants this folder too, let me know.
5 FFU-Deploy, which contained only the .ffu file I zipped up and reposted.
From my brief research into the matter, it appears that you can use Zune 4.7 with an older UpdateWP.exe with the following command:
UpdateWP.exe /ffu <filename>
Zune 4.7 and the older UpdateWP.exe are available all over so I didn't bother uploading those.
Machine translation of instruction file:
Again though, this isn't my file, and I haven't tested it, so don't blame me if something goes wrong.
Click to expand...
Click to collapse
ACE will try it out ^^
Actually, can you upload the whole original .rar cause I can read chinese and want to flash my phone anyways cause its bricked so I just want to see if this will help and it looks like i need the whole package in order to do so ^^

The FFU works. It is 7704 and it is amazing how much Windows Phone 7 has advanced. Now the trick is to find a way to install an exploit before Mango that sets the interop unlock at every boot or something and then find a way to restore a backup. I am not really sure how the backup/restore process works. It did require me have the latest updates before restoring so it is possible it just restores non /windows files and folders. So if we can find something in the system that can provision the provxml files then we are golden. The problem is I have no idea what would do that in the system. If you dare to do what I just did, make sure you have a back up and a backup of that backup stored elsewhere as you never know if zune will delete your backup.

[REQUEST] English Recovery Parition

Hi, I would greatly appreciate it if someone could upload the recovery parition (preferably English) to somewhere and provide a link; I bought my shift second hand and had Windows Developer Preview with no Recovery Partiton and I would be very thankful if someone could upload it.

Not Duplicate
AdinK said:
Hi, I would greatly appreciate it if someone could upload the recovery parition (preferably English) to somewhere and provide a link; I bought my shift second hand and had Windows Developer Preview with no Recovery Partiton and I would be very thankful if someone could upload it.
Click to expand...
Click to collapse
Every previous post contains links that are broken or simply dumping and restoring insturctions so this is not duplicate.

I have an English Vista recovery on my Shift, but I don't know how I could copy it off, you could give me some information about it, I will take a look at it anyways tomorrow or so. If you could profide usefull information I could do it faster.
And.. Why do you want to recover the whole windows? I have done it once and I removed it directly and installed windows 7 on it. Its way faster, Everything works. And just a bit snappier and populair then Vista(alot of people were amazed by my shift, but when I said Vista was on, they were not amused xD).

Armazia said:
I have an English Vista recovery on my Shift, but I don't know how I could copy it off, you could give me some information about it, I will take a look at it anyways tomorrow or so. If you could profide usefull information I could do it faster.
And.. Why do you want to recover the whole windows? I have done it once and I removed it directly and installed windows 7 on it. Its way faster, Everything works. And just a bit snappier and populair then Vista(alot of people were amazed by my shift, but when I said Vista was on, they were not amused xD).
Click to expand...
Click to collapse
Thanks, look at this link http://pof.eslack.org/2008/04/22/how-to-dump-and-restore-the-vista-recovery-partition-on-htc-shift/ and as for why I want to well I want to examine the default vista for some drivers, software, blocks, etc and I also want to modify it i.e. make it a Windows 7 Recovery Parition and I dont plan to recover over whole thing if any modify WAIK or OPK config to install different parition without erasing.
Thanks in advance by the way.

AdinK said:
Thanks, look at this link http://pof.eslack.org/2008/04/22/how-to-dump-and-restore-the-vista-recovery-partition-on-htc-shift/ and as for why I want to well I want to examine the default vista for some drivers, software, blocks, etc and I also want to modify it i.e. make it a Windows 7 Recovery Parition and I dont plan to recover over whole thing if any modify WAIK or OPK config to install different parition without erasing.
Thanks in advance by the way.
Click to expand...
Click to collapse
Seems pretty hard for me, Since i'm not a linux guy, I will check it out later today since i'm still at school.

Thanks
Ok, thanks.

AdinK said:
Ok, thanks.
Click to expand...
Click to collapse
I found out how I can dump the recovery, but there is not really a possibility for me to store the whole recovery, maybe I could split it and upload it to mediafire.

I have tried to follow the instructions, which was actually very simple, but when I enter the cmd line, press enter it doesn't return a reply or something with writing or anything, it just enters and the white dot stays there, I don't know if this is normal =/

This Part
This part? "dd if=/dev/sda of=/media/disk/shift-vista-recovery.bin bs=16384 skip=2244480" if so leave it for about 45 minutes if it hasn't finished by then and returned to prompt then somethings wrong :/ but check if the file is there.
Oh and make sure you're copying the correct parition.

[Q] got stuck on unpacking zImage...

hi there!
I have a viewsonic n710 tablet ,it's a fake Nexus7,and it's only saled in chinese mainland,I have to say ,it sucks,hardware and software!
about hardware ,I only can do nothing,but the software ,because it's similar with nexus7 ,so I decided to do something on it!
now here comes my question:
I got stuck on unpacking zImage ,I used all the methods that learned from xda here ,but only repack_zImage works,but whatever version I used to unpack the zImage ,the result seems not right,the early version I used can extract some files in the zImage_unpacked folder but it prompted wrong message and quit ,the newest versiion (0.6) I used can also extract some files in that folder but the program keep displaying many increased numbers and never stop unless you pressed "ctrl+c" to quit it forcely ,so I think the files maybe not right either!!!
in the first place ,I think the tools I used to unpack is not compatible with my n710 zImage,so I searched at least 3 different to unpack my kernal,
unpack ,unpack-initramfs,repack_zImage, the former 2 tools even can not extract anything from zImage ,only extract a folder named initramfs_root,only repack_zImage did something but seems not right!!
so I tried such ways to unpack nexus7 zImage for proving ,but it surprised to me that it can not unpack nexus7 either!!
I am confused now,I have been searching solution to solve this problem for two days,but a little achievment I got!!!
the only way I can do now to ask such question at here,I am sure that some people can extract right files from zImage ,(because they even can do an custom kernal for nexus7,:good:I adore them so much,)so will someone tell me how to unpack right files from zImage???or did I miss any important things for unpacking ,I am a green hand on linux system.,so I might make many silly mistakes on operation
!!
thank you very much in advance!!any suggestion and hint also will be appericated!!

Just because it might look/seem like a n7, its not one. Its different so our kernels wont work
Kernels aew very specific so they need to be made for the device because they have different hardware
Sent with from my Asus Nexus Unicorn

markj338 said:
Just because it might look/seem like a n7, its not one. Its different so our kernels wont work
Kernels aew very specific so they need to be made for the device because they have different hardware
Sent with from my Asus Nexus Unicorn
Click to expand...
Click to collapse
sure ,I cann't agree any more with your opinion!thank you for your information!
but if I knew the way to unpack nexus7 zImage ,I could also unpack n710 zImage!you know ,if I could unpack kernel ,I would hack it with my mind!

Viewsonic N710
Hi There
I agree with you, i bought the same Tablet and the prior Incident is that you can not install the Google Playstore. Contacting the "Customer" Support is useless cause you always have a different employee who answers emails or is on the Chat Line. I asked them now for about 6 Times to give me a RMA Number and the Return Adress and it they do not want to understand.
The Tablet itself seems to have a good Hardware, Sygic runs very fast and stable, i also installed some Games and they are very solvent.
Dolphin HD didn't runs for the First Installation but now also runs stable and fast.
There is an Instruction on Tabletrepublic but it didn't work for me. I was able to install the ADB Driver and can also run it from the DOS Box. I was not able to Root the Tablet which is necessary to get Google Playstore to Run.
Does anybody else has rooted this Device and can explain how he did it...?
Thanks
Michael
chinajjb said:
hi there!
I have a viewsonic n710 tablet ,it's a fake Nexus7,and it's only saled in chinese mainland,I have to say ,it sucks,hardware and software!
about hardware ,I only can do nothing,but the software ,because it's similar with nexus7 ,so I decided to do something on it!
now here comes my question:
I got stuck on unpacking zImage ,I used all the methods that learned from xda here ,but only repack_zImage works,but whatever version I used to unpack the zImage ,the result seems not right,the early version I used can extract some files in the zImage_unpacked folder but it prompted wrong message and quit ,the newest versiion (0.6) I used can also extract some files in that folder but the program keep displaying many increased numbers and never stop unless you pressed "ctrl+c" to quit it forcely ,so I think the files maybe not right either!!!
in the first place ,I think the tools I used to unpack is not compatible with my n710 zImage,so I searched at least 3 different to unpack my kernal,
unpack ,unpack-initramfs,repack_zImage, the former 2 tools even can not extract anything from zImage ,only extract a folder named initramfs_root,only repack_zImage did something but seems not right!!
so I tried such ways to unpack nexus7 zImage for proving ,but it surprised to me that it can not unpack nexus7 either!!
I am confused now,I have been searching solution to solve this problem for two days,but a little achievment I got!!!
the only way I can do now to ask such question at here,I am sure that some people can extract right files from zImage ,(because they even can do an custom kernal for nexus7,:good:I adore them so much,)so will someone tell me how to unpack right files from zImage???or did I miss any important things for unpacking ,I am a green hand on linux system.,so I might make many silly mistakes on operation
!!
thank you very much in advance!!any suggestion and hint also will be appericated!!
Click to expand...
Click to collapse

Jiggasonic said:
Hi There
I agree with you, i bought the same Tablet and the prior Incident is that you can not install the Google Playstore. Contacting the "Customer" Support is useless cause you always have a different employee who answers emails or is on the Chat Line. I asked them now for about 6 Times to give me a RMA Number and the Return Adress and it they do not want to understand.
The Tablet itself seems to have a good Hardware, Sygic runs very fast and stable, i also installed some Games and they are very solvent.
Dolphin HD didn't runs for the First Installation but now also runs stable and fast.
There is an Instruction on Tabletrepublic but it didn't work for me. I was able to install the ADB Driver and can also run it from the DOS Box. I was not able to Root the Tablet which is necessary to get Google Playstore to Run.
Does anybody else has rooted this Device and can explain how he did it...?
Thanks
Michael
Click to expand...
Click to collapse
To root N710 is not a big deal any more!you can flash cwm recovery to help you ,I released cwm for N710 at Tabletrepublic,so just download the right version recovery for your tablet ,please aware that 1.01-1.05,1.07,they don't use the same cwm recovery!
after fflash recovery ,run into cwm recovery ,and flash superuser.zip just like nexus 7 does!
of course you can also flash the gapps.zip to get google service serial and what not !
good luck to you if you tackle it!

Vista Recovery Partition

Mornin' I accidentally deleted my recovery partition, would anyone be able to upload one for me?

ucenna said:
Mornin' I accidentally deleted my recovery partition, would anyone be able to upload one for me?
Click to expand...
Click to collapse
I fear we are the last few who actually still use these. I have looked highand low and cannot find the original recovery partition anymore. Used to be posted here: http://forum.xda-developers.com/showthread.php?t=405220&highlight=recovery+partition but now the links (5 years later) are dead,
Hope we find this. It's been a while and I'd like to get this thing back to factor defaults,

re
vertigo1 said:
I fear we are the last few who actually still use these. I have looked highand low and cannot find the original recovery partition anymore. Used to be posted here: http://forum.xda-developers.com/showthread.php?t=405220&highlight=recovery+partition but now the links (5 years later) are dead,
Hope we find this. It's been a while and I'd like to get this thing back to factor defaults,
Click to expand...
Click to collapse
I have the UK OEM VISTA recovery partition
but its in acronis image format, ive tested by restoring the image on a USB drive which you can select on the bios,
its about 3-4 gb
if anyone wants it, send me ftp details ill glady spend afew hours upping it providing you share on the forums also

packkman said:
I have the UK OEM VISTA recovery partition
but its in acronis image format, ive tested by restoring the image on a USB drive which you can select on the bios,
its about 3-4 gb
if anyone wants it, send me ftp details ill glady spend afew hours upping it providing you share on the forums also
Click to expand...
Click to collapse
Hi packkman, Are you still willing to help us with that image? if so I will put an ftp service to receive it and after that will break it into 5 pieces to put it available for everyone.
Thaks very very much in advance, your are my only hope before dying on the HTC repair centre.

Email sent to Pakkman just in case he is not subscribed to this thread.