I have an 8525 with ATT in the USA. Two days ago the speaker just stopped working. It won't ring, go to speakerphone, make any kind of sound. I'm wondering if hopefully it's just my ROM that it may not be compatible with but I've been using it successfully for 6 months now.
Does anybody know how to fix the speaker or if it can be fixed? I'm loathing having to look at my phone all the time to see if its ringing because the vibrations are also too subtle. Any help is greatly appreciated. Thanks in advance.
ckent03 said:
I have an 8525 with ATT in the USA. Two days ago the speaker just stopped working. It won't ring, go to speakerphone, make any kind of sound. I'm wondering if hopefully it's just my ROM that it may not be compatible with but I've been using it successfully for 6 months now.
Does anybody know how to fix the speaker or if it can be fixed? I'm loathing having to look at my phone all the time to see if its ringing because the vibrations are also too subtle. Any help is greatly appreciated. Thanks in advance.
Click to expand...
Click to collapse
Unlikely to be the ROM
We'll rule out the volume setting (assume you checked that!)
You could try a hard reset to rule out any software issue.
However, I suspect it's the rear speaker connector that's popped off. It's common enough and only requires the rear casing to be removed. When re-assembling remember to align the macro toggle switch with the switch on the case. See here:
http://forum.xda-developers.com/showpost.php?p=1376254&postcount=2
Warranty voiding of course.
Mike
PS. Rarely it can be the coil in the speaker has broken (really pretty rare)
Related
I need urgent help with this problem im having. I was using my JAMin when all of a sudden, it just went mute. I turned it off and on again but it didnt do any good. Everything else is working fine; it's just that there is no sound.
I've tried inserting and taking out the hands-free pin from the jack but still no luck. I even tried the hard reset; but still no success.
Kindly help me out!
Thankyou.
You get sound from the handsfree? if so, the speaker could be broken.
The thing is, the speaker just can't break on its own now can it? I mean it the set didn't fall or anything, so how can the speaker possibly break?
Oh and yeah, i do get sound from the handsfree; just not the speaker.
same problem with mine...turn out the speaker is broken, apparantly it is common problem with early version of 818pro (the service centre told me that)
Yep you got a bad one.
This seems to be a major problem with the HTC Prophet as a whole regardless of the branding. I have returned mine to Orange for a replacement, they confirmed that it was hardware failure. I thought that I might have just got unlucky with a bad batch, but looking across the NET and here, it appears that all brands based on the HTC Prophet are failing.
Obviously, shoddy manufacturing, I guess HTC did a little penny pinching with the speaker system.
hi
i have a cingular 8525. i have no sound out of the loudspeaker and when i connect a USB headset i dont have sound either. i replaced the speaker thinking that it was that if anyone could please help me.
thanks
brandon
djstimpy said:
hi
i have a cingular 8525. i have no sound out of the loudspeaker and when i connect a USB headset i dont have sound either. i replaced the speaker thinking that it was that if anyone could please help me.
thanks
brandon
Click to expand...
Click to collapse
Welcome to XDA-Dev
Not enough info given.
Is there any sound at all out of wither speaker for any function whetjher it be phone / notifications etc etc.
Did you ever have any sound and if so when and how did it stop.
Have you done a HARD reset or not
Did you flash a new ROM / install a new programme and so on
Mike
i get sound out of the head speaker when calling but when i change over to loudspeaker it doesnt work. well i bought it used n it had this problem. i have done a load of hard resets and ive changed the rom so many times but nothing has yet worked.
djstimpy said:
i get sound out of the head speaker when calling but when i change over to loudspeaker it doesnt work. well i bought it used n it had this problem. i have done a load of hard resets and ive changed the rom so many times but nothing has yet worked.
Click to expand...
Click to collapse
Hi
Well I just looked at the board again (it's been a while). Unfortunately, in my view, it is not possible to work on the speaker circuit other than in very crude fashion. The board is multi layer and hence you cannot trace the connections easily, if at all without a diagram. Checking circuit integrity is virtuallty impossible without proper test equipment. Even repair shops won't bother - they will just get a new board. Another frustration is that it is very difficult to work on the circuit whilst it is switched on.
So after that ramble, I'm afraid if you have checked the new speaker and it's connector block then there's not much else you can do. It is possible that part of the circuit is blown, possible through a dodgy mini usb connection!
I would certainly believe it to be hardware if you've done hard resets and tried different ROMS. In fact any ROM should work.
Mike
i was afraid of that =( well i guess i got screwed on that part thanks for the info.
Hey all, im glad this site is up its been great finding what i can really do with my wizard!
here is he issue im having. the wizard has 3 different speakers and 1 microphone. 2 side speakers (used to play music, or speaker phone) and the 1 main speaker (used for hearing calls). none of the 3 work when im making calls, listening to music, alarms, or any of the "screen click" sounds and the microphone doesnt work on phone calls or note recordings. however, the one time the speakers do work is when i have an incoming call, i tried listening to see which speaker its coming out of and it sounds like all 3. the headphone jack still works so thats what ive been using. pressing the speaker phone button while on a call (that i cant hear) doesnt do anything, the UI doesnt show any change or switch to indicate its changed to speaker phone and the "speaker on" button doesnt change to "speaker off" like it used to.
originally i thought this was a ROM issue, i was using the manufacturer's ROM (cingular 8125, unlocked for tmobile service) so i followed the lovely tutorial and switched my phone over to the t-mobile 2.26 ROM. this had no effect, so I then upgraded to XDA's WM6 ROM and while i love this new ROM it still did not fix my sound issue.
im stumped, any help anyone can offer would be great. I wanted to post here before i crack it open to look at all the insides.
same problem!
I'm having the exact same problem! I just noticed the problem recently, when my phones alarm didn't sound. I'm running a custom cooked rom from mattk_r 318 kitchen, but I don't think the rom is the problem, as i am indeed still hearing sound from the head phone jack. I don't think the internal speakers are broken, as when a call comes, the phone rings, and the sound come out from the speaks as mentioned above!
Help!
dropped?
have you ever dropped your phone?
I have dropped mine a couple times and thats the only cause I can come up with. But this never seemed to be a problem until recently.
no major drop recently.
i havent really dropped it recently at all.and for some reason i dont think the hardware is the problem,because i tryed voice recorder,and it records my voice and i can play it
back through the headset.so that confirms that the mic and both spealers work (rings
when incoming call). i really dont want this to be the downfall for my wizard! is there
any key registry entrys for sound maybe that we could have a look at? btw my wizards a G4 if thats makes any difference.
please help!!
mine is a g3, if it were a software issue then reflashing should have solved it. right? i dont know enough about the internal workings of the wizard to know what a flash actually does.
?
Anyone have any ideas on what I can try?
Well, a flash is an OS upgrade/downgrade. It contains drivers, programs, registry settings, things of that sort. Sounds like your problem is hardware related, nothing to do with the OS itself.
I assume the warranty on that baby has already expired, so you're pretty much on your own.
Two options come to mind:
1. The obvious... buy another Wizard
2. The not so obvious... buy another Wizard with a broken screen and take all of its guts out and put them in yours.
A third option also exists... (ther's always a third way)
Mind you, this is for INFORMATION PURPOSES ONLY! In no way do I condone the below mentioned method.
Get a new line of service with Cingular and buy the Wizard to use with it. Exchange their boards, swap the IMEIs using the Wizard Service Tool utility found on these boards, cancel the line of service and return the "new" Wizard.
Sound issues
I have had a similar problem but located my problem to the microswitch which is in the headphone socket. Might be worth trying pulling the headphones in and out a few times to see if it allows the microswitch to release (if that is the problem?)
Steve
The wizard is magic
Some how my wizard seemed to repair it self. Its sound is working again...i didn't reflash or do anything special....weird. I think its because the phone had a good vibrate....ive got one of those speaker docks for the wizard..i put it in there...got a phone call and talked and stuff...but while it was in there (with the mic plugged it) it vibrated alot...maybe that flicked the switch mentioned above?
weird..this phone never ceases to amaze me. I just hope it doesn't happen again... because it appears to be emerging as a problem as the wizards get older?
Keep up the good work guys!
LOL!!!!!!!!! its so simple and yet so amazingly smart
wow, Steve you are the most amazing person EVER!
I put the headphone piece in about 1/10 of the way and slowly made a swirling action as i slid it all the way in, clicked the start button on wizard and i heard the "click" for the first time in a month!
Thanks!
I tried different options to get my sound back, no luck so far
Problem started after using the headset-connector to connect it to an FM-Transmitter.
After reading this thread, my guess is that the "micro-switch" is in a wrong position. So I opend my MDA, but can't find any "switch" in that connector.
Is there some more info about that connector, a connection-diagram perhaps ?
what worked for me was inserting the headset jack in roughly, robbing each side of the headset jack to try to hit the "switch". that might work for you.
Yes!!! Thank you a lot!
I have the same problem, no sound in my speakers, just vibrate and sound in handsfree. I figure out that this micro-switch could be the problem, but I haven't know how to solve it. Thank you once again, I love my SPV!! and this community.
Fixed!
Woohoo!
This problem just cropped up for me on the weekend.
Thankfully it wasn't long before I happened across this thread.
About a minute of persistent jiggling the microphone jack did the trick.
Thanks!
First of all Hi to the whole community by a new noob member.
I upgraded to WM6 thanx to you 2 weeks ago.
Now the problem :
My Tytn is mute.
No sound at all.
No ringing, no playing, no sound at all.
Can someone help me?
It worked fine till yesterday.
It has not been hitted.
I tried Soft and Hard reset, same problem.
It seems an hardware problem (I thought it was a SW problem before hard reset)
Olipro and WM6 Htc version (Italian) on board.
devilman said:
First of all Hi to the whole community by a new noob member.
I upgraded to WM6 thanx to you 2 weeks ago.
Now the problem :
My Tytn is mute.
No sound at all.
No ringing, no playing, no sound at all.
Can someone help me?
It worked fine till yesterday.
It has not been hitted.
I tried Soft and Hard reset, same problem.
It seems an hardware problem (I thought it was a SW problem before hard reset)
Olipro and WM6 Htc version (Italian) on board.
Click to expand...
Click to collapse
Do you get in-call sound?
Mike
no, no sound at all.
No ringing when i receive a call, no sound when playing back videos or songs, no music on games, no system sounds... MUTE
It seems something connected with the speakers, but the really strange thing is it worked till yesterday...
devilman said:
no, no sound at all.
No ringing when i receive a call, no sound when playing back videos or songs, no music on games, no system sounds... MUTE
It seems something connected with the speakers, but the really strange thing is it worked till yesterday...
Click to expand...
Click to collapse
What I'm trying to get at is, is it just the rear speaker or the front earpiece as well? The things you mention use the rear speaker. If you dial your Hermes from another phone and pick up can you hear sound through the earpiece speaker?
Mike
yes, it's only the rear speker.
The earspeaker works fine.
devilman said:
yes, it's only the rear speker.
The earspeaker works fine.
Click to expand...
Click to collapse
Ok. With luck it's just the push on connector for the speaker that's come loose. Not uncommon. If you are not worried about the warranty then see here:
http://forum.xda-developers.com/showpost.php?p=1376254&postcount=2
Mike
first of all thanx a lot for tour help.
2 more questions :
1) the phone is 3 weeks old : do tou think the problem could be the one you mention with a new cell like mine?
2) The phone is under warranty (i dont have problems opening things ) Do you think it is better to bring it to an assistance centre or not?
devilman said:
first of all thanx a lot for tour help.
2 more questions :
1) the phone is 3 weeks old : do tou think the problem could be the one you mention with a new cell like mine?
2) The phone is under warranty (i dont have problems opening things ) Do you think it is better to bring it to an assistance centre or not?
Click to expand...
Click to collapse
If it's only 3 weeks old then I would certainly get it checked under warranty. IF it's the connector then it might not have been firmly pushed on from the start. If the speaker is blown then definitely go for warranty as the speaker is not easy to get a hold of.
So although it's an easy fix just remove the back and you see the connector, it is too much to risk your warranty if it turns out to be more serious! Only problem may be returning the ROM to an acceptable one before getting a repair.
Mike
yes, this could be a problem.
I hope they will not make objection for WM6 (it's the HTC official relaease) but i think i shiul reinstalla the old bootloader, am i wrong?
is it possible ? where do i find it here ?
I'd really like to make it by myself, the problem, i think, is that the little label "void" has to broken and with it the warranty, hasn't it?
Where can i find an How TO disassemble the Tytn?
Again, thank you very much.
I've got a bit of a problem with my hermes. For quite a long while now the speakers have just not been working. The speaker for the phone works but the ringer and loudspeaker don't work. Initially after a soft reset it would work for about half an hour again and then stop working.
I don't think it's software related as I have flashed my phone a couple of times since it started.
If anyone could help me out with this at all I would be incredibly grateful as it is intensely annoying not being able to hear calls coming in.
Thanks,
Stuart
I had a similar problems with the speaker. It was because there is a cable from the speak to the mainboard that can become disconnected. I dropped my phone and the connector became lose. If you take you keyboard part of the phone apart you will see the small cable running from the speak to a port on the board, just reconnect it and it should work.
Tim is right. Do a search and it will lead you to a thread with pics so you can see how to fix it. It's a simple repair. I've had to do it twice on mine in a year.
Thanks a lot guys.
I'll try and find that.