stock rom help - Wing, P4350 General

right now im on the touch it 4.1 and i want to go back to the stock rom. ive used the RUU but it just goes to 1% and then the phone restarts and then the process comes up as an error. can anyone help?

Have you Hard SPL'ed your phone. If you have, you need to read the forum http://forum.xda-developers.com/showthread.php?t=364543. This was a lifesaver when I needed to send my wing back for a replacement. It has step by step instructions for flashing Stock ROM. Just curious, why are you going back to a Stock ROM?

st
buddy ur a lifesaver!!! but actually im doing the same thing, sending it back in.lol. and yes i did hard-spl

Glad to help.

Related

Cannot Downgrade

Ok I searched before asking and hope this isnt somewhere else but I have a downgrade issue. I want to downgrade from the OTP 7.7 to the original t-mobile rom but every time I try it goes to 1 percent and the phone resets itself then causing a update 262 error I have tried putting the phone in bootloader and even tried putting the phone in flight mode. None of these have worked. I am on hour three now of returning my WIFES wing back to its original state to no avail. My wife is starting to think I cant change it back and is getting upset PLEASE help!!!!!!
Try to install Hard SPL 4.70 yang again, maybe this can help you. I had an error like this, when I tried to flash back to HTC-Rom before a while.
emtffs said:
Ok I searched before asking and hope this isnt somewhere else but I have a downgrade issue. I want to downgrade from the OTP 7.7 to the original t-mobile rom but every time I try it goes to 1 percent and the phone resets itself then causing a update 262 error I have tried putting the phone in bootloader and even tried putting the phone in flight mode. None of these have worked. I am on hour three now of returning my WIFES wing back to its original state to no avail. My wife is starting to think I cant change it back and is getting upset PLEASE help!!!!!!
Click to expand...
Click to collapse
are you trying to restore the wing back to original tmobile stock ROM and remove hardspl (for warranty purposes) or just getting the stock ROM back?
are you hardspl?
This is not a development thread. Please keep all non-development threads to the Herald or Herald 6 forums.
If you hardSPL'd, you can't flash because of your current SPL. You can do two things:
1. Use USPL along with the tmobile stock RUU to bypass the HardSPL and overwrite it with the original SPL.
2. Take apart the RUU and put it back together without the old SPL (and resigning it with a non-tmobile/htc signature which is done automatically by the tools.)
gotanewphone said:
are you trying to restore the wing back to original tmobile stock ROM and remove hardspl (for warranty purposes) or just getting the stock ROM back?
are you hardspl?
Click to expand...
Click to collapse
Yes I am Hard SPL with the yang version will try the USPL as Ivan Said. Ivan I am sorry will put thread in right place next time.

Help me out in easy steps...

Ok so I have been having problems with my HD2 TMOUS and went back and forth with maybe it was something I did wrong or wasnt doin but I was doin the same exact steps to my wifes HD2 and hers is fine. So now I have to send my phone back to TMO for a replacement. So now I need all the steps and the ROM to revert back so I can send it back.
I found this while doing a little search. hope this helps
http://theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/

got hardspl now i'm stuck

a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
lilguy227 said:
a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
Click to expand...
Click to collapse
ok as from my knowledge you dont necessarily need to do task29 if its ur first time flashing (cuz i didnt and i got very good results) so i think u messed up in tht part.. but its ok, now you prolly want to first --> do a task29 again... second ---> get the nrg rom and flash it.... third -->get a radio of 2.10 or higher and flash tht....and just to play safe flash everything using custom ruu (i got better results using them...just saying)... also when u do each flash and its suspenseful dont boot up the phone, just take out the battery and back into bootloader.
hope this helps... report back lol
^thanks man
Okay so heres how it goes, my phone is def not bricked
custom ruu has only worked once for me
now whenever i try to use it it always gets stuck at 8%
i found that if i flash it at night and hard reset. wait til morning and turn on the phone
then it loads past the nrg screen and into the OS.
i'm currently trying to get it back to stock and i downloaded the tmobile update
but it doesnt seem to work, it also keeps stopping at 8%
i disable the anti virus stuff and i plug it in to the back of my computer
sounds like a defect
sorry to bust your bubble bro but it sounds like you got a classic case of a defective leo, i too did the same steps you did and it turns out my main board wasn't any good and the phone kept overheating, turns out when flashing custom roms they tend to put more pressure on the snapdragon then a regular stock t mobile rom. i know this sounds crazy but i believe it to be true, so with that said you got two options, one get back to t mobile customer care and get a replacement. or do what i did and find a repair shop and let them know that your leo either needs a new mainbaord or a new heatskin like mines did, it cost me 80 dollars which wasnt bad since my leo was a gift and i couldnt give it back to t mobile... hope that helps in some way
p.s. sorry for the edit but if you cant do either of those of what i suggested, try this get yourself a nice icepack nthe size of your phone and mount the leo on top of it whenever your using it, so that sucker wont overheat. once again i hope i helped

help! need stock hd2 to send back to tmo!

so i got this refurbished hd2 from t-mo a few days ago. it had a reset issue so i installed HSPL 2.08 on it and put android on it. same problem. it resets/freezes every 3 min or so if there is a sim card it in. im gonna send it back but i need to make sure it is totally stock. I got the stock rom back on but how do i put the stock HSPL back on it?
ty all
edit: found how to flash stock spl back on! mods please remove/delete topic

Wrong Rom need to SBF

Hi my friend has this phone rooted and he put the wrong rom on it as he tells me that the phone turns on but data and such doesnt work and the icons are too big for the screen and what not. how would i flash back to SBF? and unroot the phone back to stock? Thank you

Categories

Resources