I just made a phone call and the person on the other end couldn't here me. I've just checked with a friend and they can just about hear me but its gone extremely quiet - it wont hear me when I record now either.
Does anyone have any ideas why this might have happened - what is the likely cause (dust in mic, mic problem or software problem?)
Thanks for any help
L1ndon said:
I just made a phone call and the person on the other end couldn't here me. I've just checked with a friend and they can just about hear me but its gone extremely quiet - it wont hear me when I record now either.
Does anyone have any ideas why this might have happened - what is the likely cause (dust in mic, mic problem or software problem?)
Thanks for any help
Click to expand...
Click to collapse
...low recording volume? Did you check for mic volume and set it all the way up?
Thanks for getting back to me -
Is there a mic volume setting? I dont know where to find it if there is? (Im using the orange rom - maybe I need to do it in the registry - if so do you know where)
All I can find is the microphone AGC- when I set that it comes a bit louder but not much - I've been checking it via phoning my land line and via recording memos
thanks again
I just tried it with my hands free headset and it works fine so I think that means it must be a physical problem. I keep it in my pocket all the time so its probably got some fluff in it or something -
does that sound right?
anyone? Im thinking of taking it to bits as I dont seem to have any other options -
unless there is a mic volume control that I dont know about
OK there was nothing obviously wrong with it, so some component must have gone, has anyone done a repair themselves or should i send it somewhere and if so where (in the UK)
all replies appreciated
Related
on a I-mate jam it's possible to turn on speaker while calling so you can speak "handsfree".
This can be done by holding down the green call button.
When I do this the sounds of the speaker is de same as normal only the sounds comes from the back of the phone instead of the front.
Does anybody know how to fix this? A friend of mine has the same phone without a problem.
KoBolD said:
on a I-mate jam it's possible to turn on speaker while calling so you can speak "handsfree".
This can be done by holding down the green call button.
When I do this the sounds of the speaker is de same as normal only the sounds comes from the back of the phone instead of the front.
Does anybody know how to fix this? A friend of mine has the same phone without a problem.
Click to expand...
Click to collapse
Have you tried while you are on the speakerphone mode to make the volume slider higher?
That ain't gonna help you. This is a known - and unsolved problem with the Jam. If you really need a speakerphone, you should return the phone. No amount of firmware/ROM update will help you.
I use the speakerphone option without any problems. The sound is loud and clear. What is this unresolved JAM problem that you're talking about?
Jam speakerphone volume problem
My XDA1 had the best speakerphone I've ever used, including corded phones. I could be in a conferance room with 10 people around the table and everyone could hear, speak and the participate on the phone never had problems with background noise. I have a hard time accepting that next generation technology from the same manufacturer should be woefully inadequate. The unit is advertised as a speakerphone, the solution is to return my phone and purchase another? No thanks friend, anyone reading this with solutions please respond.
I only have the phone for 1 month now so I´ll return it
tnx for the help
I think most of us don't know how to hold the mini in the right way, while the phone is in speaker mode...
if u want to hear a load voice.. make sure that back of the phone faces ur ear..
that' because the mini has 2 speakers... and the one in the back( near the mirror) is loader.. so you will hear the conversation very well...
and BTY.. I suggest u upgrade to the latest ROM available for ur device..
it helped me a lot....
cheers
duke911 said:
I think most of us don't know how to hold the mini in the right way, while the phone is in speaker mode...
if u want to hear a load voice.. make sure that back of the phone faces ur ear..
that' because the mini has 2 speakers... and the one in the back( near the mirror) is loader.. so you will hear the conversation very well...
Click to expand...
Click to collapse
Wrong - its patently obvious that the sound is coming from from the back speaker. Why on earth it comes frm the back is another question entirely, given that the speaker phone is supposed to free up your hands so you do other things, including multi-task on the device i.e looking at the screen! Every other phone I've had has a decent speakerphone - and they face the front too.
But the main problem is that the volume from the supposed "speakerphone" is too damn low, irregardless of location.
Considering all the huge volumes of prior experience that HTC has (making practically every Microsoft PPC device, smartphones, plus the Palm Treo phone), things like this awful speakerphone on the magician are really not excusable at all.
I went through 3 TREO 600s due to speaker problems. You could barely hear the speaker phone on the 600 either. ANd to top that off, no one could hear you! The JAM is nice, but the more that I use it, the more I wish that either I bought something else or that the the JAM could just work the way it was designed!!!!!!
1.3 Mega pixel camera... my ass! It's the same quality as my first Casio digital camera from '96. Not mention the fact that Imate can't even put a decent ROM update together.
Perhaps we should build our own PPC's!
P.S. PM me if you want the CEO and VP of Imate's e-mail address. I e-mailed them and they actually wrote back! -Of course they weren't very helpful though. :evil:
One time, I turned on this speakermode operation on my MDA-Compact, I could hear my phonecall loud and clear from the built-in speaker.... This happenend accidently, probably by pressing just the right button, but I wasn't aware....
I cannot find how to do this again? How can I get the MDA-Compact to operate in speakermode using the built-in speaker?
I'm searching this (and other forums) quite a while now, but I cannot find my solution?!
Any help will be very much appreciated!
Thanks,
Igor.
One time, I turned on this speakermode operation on my MDA-Compact, I could hear my phonecall loud and clear from the built-in speaker.... This happenend accidently, probably by pressing just the right button, but I wasn't aware....
I cannot find how to do this again? How can I get the MDA-Compact to operate in speakermode using the built-in speaker?
I'm searching this (and other forums) quite a while now, but I cannot find my solution?!
Any help will be very much appreciated!
Thanks,
Igor.
Speakerphone..
To turn on the speakerphone part press the Green call button whilst in the call for 5 secs or so.....
I updated my Jam and now it's all ok
I think this is a different problem to the ones already posted, I'm new to this so please bear with me.
The microphone on my XDA mini s is rubbish so instead I like to use the supplied headset which is fine. You could hear calls and music at the right levels and more importantly meant I wasn't shouting....
but now the volume coming through the headset is very very low, the slider on the headset is pushed to the max and the slider on the phone is also at the top. Without changing any settings playing music in Windows Media player is fine. Why would the voulme for calls suddenly be different to the volume levels in other apps?
Hope somewhere here can help.
Thanks
I have the same problem, since upgrading to 2.24 rom, over bt headset. Hope someone who knows more reads this too...
I haven't upgraded any roms, this problem has just appeared. Another part of this problem is the person I'm calling via the headset say they get an echo of their own voice. Anyone one got any ideas?
Thanks
Problem solved, it was sent back to O2 and they said they changed the circuit board!! Easy fix really!!! :?
man, i dont want to send mine in... i need it on a day-to-day basis for my business. how long were you without it?
Hello,
I got problem with microphone in my HTC HERMES. Without any reasons microphone stop working. Everythink is fine, i can call and do voince records, and then i got call or i just want to do voice note and nothing beside noise is recording. I dont know why it happining. After some time all back to normal, i can call and they hear me, also my voice note are loud and clear. My radio is 1.16. I reinstal my software to PDACornerPro.V25.NonRBSN.Opera. I did do HardReset and this mike problem always come back.. WHY? How make it work correct?
PLEASE HELP ME
neonq said:
Hello,
I got problem with microphone in my HTC HERMES. Without any reasons microphone stop working. Everythink is fine, i can call and do voince records, and then i got call or i just want to do voice note and nothing beside noise is recording. I dont know why it happining. After some time all back to normal, i can call and they hear me, also my voice note are loud and clear. My radio is 1.16. I reinstal my software to PDACornerPro.V25.NonRBSN.Opera. I did do HardReset and this mike problem always come back.. WHY? How make it work correct?
PLEASE HELP ME
Click to expand...
Click to collapse
Well sounds like it might be hardware. If you've done a few hard resets and tested before installing any software and the problem is still there sometimes, then I'd say it's hardware.
The m/board on the Hermes is not one that you can really work on with ordinary soldering tools. A repair shop could check by using a heat gun to check the contacts on the Mic. If that fails then it's likely either the mic coil or a problem with the contacts at or coming from the USB connector.
Mike
I say something more. Now i hear myself on voice note but really quiet like 1/10 normal volume.
neonq said:
I say something more. Now i hear myself on voice note but really quiet like 1/10 normal volume.
Click to expand...
Click to collapse
Yes, but even with an open circuit / damaged coil, cracked connection, you can sometimes have sufficient leakage current to get a faint response from things like microphones and speakers. I still think it's probably hardware - but thoroughly check all the software possibilities eg clean install, stock ROM etc.
Hm i open hermes but im noob in that stuff so everythink look fine for me with microphone. I clean that think to protecting microfone. The problem of couse dont disappear. But.. its look like always when I plug in usb to spv, microphone start working fine.. Not always but moust of time it is solution.. If it is a hardware what i should to recommand to replace in service? Microphone?
ignore me, re-read what you put and decided i was a nab
I just made my first call with my HD and as soon as I pressed the call button (and before it had connected) I could hear hissing through the speaker. This carried on during the call, on and off to the point I used the speaker phone (which didn't appear to be affected.
Has anyone else had this problem, and am I likely to be able to sort it out or will I have to send it back, as tbh if it stays like this there is no way I will actually be able to use it to make calls.
Bump, nobody got any suggestions?
I assume it must be a fault then?
Amp34 said:
Bump, nobody got any suggestions?
I assume it must be a fault then?
Click to expand...
Click to collapse
All I can say is that I don't see this behaviour - fault looks favourite to me therefore, for whatever that's worth to you.
Ok XDA, i have one big/huge/enormous problem,
Scenario:
Talking on the phone, using the Wired Handsfree (which came with the phone), when i get another call (call waiting) the notification of the other call is going through the loud speaker! not only that, the ongoing is immediately routed the loud speaker, anyone near me can hear the conversation clearly!!!!!!
does anyone face this?
i checked it on 2 X1s, 1 black & 1 silver and it's there.
anyway to solve this
same problem for me
I have a similar problem with a Parrok CK3100. The phone can't ever seem to decide for sure what speakers it's supposed to be using.
Sometimes I'll press the Voice Command button on the bluetooth device and the phone speaks out, sometimes the car speakers speak out.
I just don't know.
Annoying that the much, much cheaper E71-2 handles all of this with great aplomb, as did my Q9h.
any one else facing this problem people?
i started searching in order to get a clue,
the main thing i'm thinking is that it's caused the same way VOIP (including skype) used to behave using speaker phone!
what do you think?
I have the same problem with a german x1. ROM R2A.
Is there any solution for this problem
thx
walk
Fixed
Bugs Fixes (Registry):
Sound is routed to the Loud Speaker when having a phone call and get a waiting call while using Handsfree
change the key HKCU\ControlPanel\SoundCategories\Ring\Speaker to 0 (default value = 1).
added to the wiki of X1
Thanks. I've changed that setting to see if it solves my problem, too.