Database Users

Always on line for xda 1??

Any body knows for xda 1, you can keep checking new mail arrival through GPRS?
I heard people using xda 2 can do that. But is there any chance xda 1 can do the same thing?
Actually, when u do the setting for POP account, it ask u to set how many minutes to check for new messages. But it never work because the GPRS will close automatically.
Thanks very much. :?

Sure it can be done!
Take a look at:
http://www.o2.co.uk/productsservices/xda/romupgrade/0,,170,00.html
BTW the above is one of many!
also where are you located?
HTH

I am using the most updated PPC2002 version already. (3.20.06 ROM and 4.21 Radio)
Do u mean I have to upgrade to PPC2003?
I doubt that because they are not very stable for me to use in Hong Kong so far from other guy's comments in this website.
Thanks very much.

chris_khho said:
I am using the most updated PPC2002 version already. (3.20.06 ROM and 4.21 Radio)
Do u mean I have to upgrade to PPC2003?
I doubt that because they are not very stable for me to use in Hong Kong so far from other guy's comments in this website.
Thanks very much.
Click to expand...
Click to collapse
Since you're already running the latest upgrade its suppose to work but since it doesn't I would have to say that your always-on settings are at fault. So go to Start, Settings, Connections and make sure that its set to not disconnect.
HTH

Are you sure that it is also for xda1 ?
I can't locate that "not disconnect" setting.
Please clarify.
Thanks so much.

chris_khho said:
Are you sure that it is also for xda1 ?
I can't locate that "not disconnect" setting.
Please clarify.
Thanks so much.
Click to expand...
Click to collapse
It should say some thing like this:
GPRS connection to remain active once the device enters power save mode.
At least it does on the PPC 2002 latest AT&T ROM and the XDA developers Special Edition ROM v1.2. (which is bases on the O2 3.17.03 ROM).
HTH

That's really strange for my O2 xda!
I only found a setting called GPRS Suspend Mode setting.
It said,
When you are in power-saving mode, do you want to:
- Keep GPRS connection
- End GPRS connection
I clicked on the first one.
Then I close it, and connect to GPRS.
Just for a while, the connection ends by itself.
Any thought?
Thanks a lot again.

Yeap thats the correct setting and the same one I'm speaking of!
I read a lot of bad reports about the 4.21 radio stack so it might be at fault.
Maybe you should think about upgrading to the Qtec radio stack, heard nothing but good reports on that one.
The Qtek 1010 Radio Stack Upgrade can be found at:
http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
Download Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe
BTW read the WARNING.
BTW do you have a URL for that newer o2 ROM, I'd like to install it and see if it does the same for me/
HTH

Here it is.
http://www.myxda.com/web/template/SoftwareUpgradeIntroduction.vm
BTW, I am a bit nervous to install the radio file cause I have bad experience that almost kill my phone.
Is it really okay just to install the radio file?

chris_khho said:
Here it is.
http://www.myxda.com/web/template/SoftwareUpgradeIntroduction.vm
BTW, I am a bit nervous to install the radio file cause I have bad experience that almost kill my phone.
Is it really okay just to install the radio file?
Click to expand...
Click to collapse
Like I said I've heard nothing but good reports on upgrading to this radio
stack (no failed upgrades have been reported but as with any upgrade there is always a possibility). :wink:
BTW thanks for the link!
HTH

Hi Qman,
Have u tried to update that ROM?
Is there the same problem?

chris_khho said:
Hi Qman,
Have u tried to update that ROM?
Is there the same problem?
Click to expand...
Click to collapse
Unable to download, it kept asking for a IMEI.
You wouldn't happen to have the direct download link would you?

Oh! I didn't realize that...sorry.
I am still a bit nervous for upgrading (or is it actually downgrading) to the i-mat ROM.
If it is downgrading, I will definitely not try that...

Hi Qman,
I just notice that Yorch.net got the 3.20.06 ROM.
Also they have the 4.00.21 ROM (pre-release T-Mobile version). Is it for the US market only?
Chris

hi; Are you sure that Yorch.net got the 3.20.06 ROM??? Can't find it. I have downgraded my XDA yesterday from the kitchen wm2003 because of bugs to kitchen 2002 but it says 3.17.03 and not the one you mention???!!!

Hey,
That's not from the "kitchen". It's from the "upgrade" just under "kitchen". Check it out again and you will find it.
Anybody knows that 4.00.21 is good for o2 xda?
Chris

hmmm, currently I am using it
so far so good but there is one major BUT for me - most possibly that version makes wipe out my 256MB SD card every up to 48 hours
for me it is a major .... item
regards,
monika

That's terrible. What about the GPRS and phone reception?
To be honest, I won't use it if it will wipe off the sd contents every 2 days.
Have you tried to burn again?

so far GPRS is not working ....
but that is due local GSM provider that has some complicates setup as to make GPRS to work, phone recption is ok ... I am living in area where virtually all GSM phones had reception problems (i.e. majority of nokia phones), although in a city center it is perfect ....
just for you to know ... I have received a link from one of the group members for the most recent update - look there for details :
http://forum.xda-developers.com/viewtopic.php?t=4556&highlight=4+01+00
regards, monika

Thanks very much for your reply.
But I think that Upgrade exe file is for US only cause that include the radio upgrade as well.
So, are you able to downgrade your 4.00.21 easily?
I am not sure whether its worth to downgrade your device to 3.20.06 to see whether its a real problem with SD card. And to upgrade it to 4.00.21 again to verify it. It may happen only at some occasion as you know electronic device can never guarrentee functioning 100%.
Hope you can fix your device.
Cheers

Radio Rom 2.67.90

I have been reading rumors about this Radio Rom. If it does exist, what rom is it from. If some one can tell me i'll extract and test it.

look in artemis forum, they got the 2.67.9 radio rom in the latest artemis rom. we shoul b able to use it no problem. im willing to try it out 1st if anyone able to extract it.

Radio ROM 02.67.90
rdboyce said:
I have been reading rumors about this Radio Rom. If it does exist, what rom is it from. If some one can tell me i'll extract and test it.
Click to expand...
Click to collapse
Well since I could not find it, I decided to cook it myself. Thanx to Pof and risidoro for your help and scripts. Good looking out Pof.
ftp://xda:[email protected]/RadioRom/Prophet_G4_RadioRom_v2.67.9.exe
Disclaimer: THIS IS A COOKED ROM AND THUS IT MAY CAUSE SEVERE DATA LOSS OR EVEN IRREMEDIABLY DAMAGE YOUR DEVICE!
THE AUTHOR, NOR EVERY OTHER PERSON INVOLVED (E.G. THE ROM TOOLS DEVELOPERS), SHALL NOT BE HELD RESPONSIBLE FOR ANY MALFUNCTIONS OR DAMAGES THIS PROCEDURE MAY CAUSE.

so did someone try it? i heard new versions were very bad for the battery life, hope this one is better.

i did.. but im using wizard. somehow not compatible. should be able to use. i dunno if rdboyce pulled it out from the artemis or not but it dun work. it didnt crashed the phone thou so no harm in trying. you can flash it back to 2.26 or 2.47 if dun work

rdboyce said:
Well since I could not find it, I decided to cook it myself. Thanx to Pof and risidoro for your help and scripts. Good looking out Pof.
ftp://xda:[email protected]/RadioRom/Prophet_G4_RadioRom_v2.67.9.exe
Disclaimer: THIS IS A COOKED ROM AND THUS IT MAY CAUSE SEVERE DATA LOSS OR EVEN IRREMEDIABLY DAMAGE YOUR DEVICE!
THE AUTHOR, NOR EVERY OTHER PERSON INVOLVED (E.G. THE ROM TOOLS DEVELOPERS), SHALL NOT BE HELD RESPONSIBLE FOR ANY MALFUNCTIONS OR DAMAGES THIS PROCEDURE MAY CAUSE.
Click to expand...
Click to collapse
Is there a G3 version?

Cutefox said:
i did.. but im using wizard. somehow not compatible. should be able to use. i dunno if rdboyce pulled it out from the artemis or not but it dun work. it didnt crashed the phone thou so no harm in trying. you can flash it back to 2.26 or 2.47 if dun work
Click to expand...
Click to collapse
I did pull it from the Artemis and I'm redoing it now. You're right it don't work but it doesn't brick. I looked at the size and the Hex Dump of both and they are similar. The Artemis ROM even had the G3 and G4 IPL and SPL when I decoded the ROM. I had so much hope but no go.
I was considering the Excalibur ROM as well but its bigger than the Prophet/Wizard radio ROMs. I'm more apt Prophet/Wizard Radios are usually around 2.5MB. The Excalibur ROM is 2.8MB. Not sure the the dedicated Radio space on the Prophet but the difference is just enough to brick.
I've already decoded it. If some one wants to try the Excalibur I'll post it.

i dun mind trying excalibur as well.. but redo the artemis 1st. i'll try again once u finish.. if u look at the post in artemis forum it says 2.67 got good battery life.. dat i want!! lol..

Confirming the radio rom does not work as well on my S200

I've created a G3 version for my S200 but it's not working, doesn't find the provider any longer, I'll play around some more, but a no go so far.

Jesterz said:
I've created a G3 version for my S200 but it's not working, doesn't find the provider any longer, I'll play around some more, but a no go so far.
Click to expand...
Click to collapse
I'm the same place after re-extracting it from the Artemis ROM. I'm going to wrap the Excalibur ROM. It'll be posted soon. Anyone wanting to try it, Have fun.

i've changed the header info a bit, but that doesnt seem to help either
Let's try the next ROM

Cutefox said:
i dun mind trying excalibur as well.. but redo the artemis 1st. i'll try again once u finish.. if u look at the post in artemis forum it says 2.67 got good battery life.. dat i want!! lol..
Click to expand...
Click to collapse
OK everyone, this one is built from the Excalibur ROM. For all the brave souls:
ftp://xda:[email protected]/Prophet_G4_RadioRom_v2.63.9 0_Test.exe
I do see that the other ROM was removed so...

If you post a G3 radio rom, I can try it on my Qtek S200...

rdboyce said:
OK everyone, this one is built from the Excalibur ROM. For all the brave souls:
ftp://xda:[email protected]/Prophet_G4_RadioRom_v2.63.9 0_Test.exe
Click to expand...
Click to collapse
Did anyone try the Excalibur build?

rdboyce said:
Did anyone try the Excalibur build?
Click to expand...
Click to collapse
I'll do a test soon, I'm playing with the new AKU 3.2 ROM and made a clean version.

Radio rom upgrade problem!
I upgraded my s200 RadioROM to 2.63.90. Now my Phone lost Radio Rom and lost the GSM signal. The phone become very slow and con't activesync to the pc. I have try but can't upgrade any other rom now! Can someone help me?

I had the same problem! After radio update, Prophet does not connect to the PC anymore. I,ve managed the problem with the following steps, take them exactly:
1. Download the linked file and extract it in a known place: ftp://xda:[email protected]/Uploads/Wizard/2_47_11_radio.rar
2. Disconnect Prophet from the USB cable;
3. Enter in the boot loader mode (press power button + camera button in the same time and hit reset);
4. Connect the cable and in the left down corner the USB name will apear;
5. Go to the directory that you extracted from the downloaded file and start ROMUpdateUtility_Wizard_NoID.exe (is in itallian, but there are the usual steps for upgrading ROM, so I think you'll manage).
After this, hopefully the upgrade Radio ROM process will start!
I'll repet myself, follow exactly this steps with attached file, this was my way and the only that worked for me!
P.S. Someone should delete the 2.63.90 Radio ROM file from th Prophet FTP, is dangerous and brakes your Prophet!

Thanks very much! My Phone has come back!
GOGULETE said:
I had the same problem! After radio update, Prophet does not connect to the PC anymore. I,ve managed the problem with the following steps, take them exactly:
1. Download the linked file and extract it in a known place: ftp://xda:[email protected]/Uploads/Wizard/2_47_11_radio.rar
2. Disconnect Prophet from the USB cable;
3. Enter in the boot loader mode (press power button + camera button in the same time and hit reset);
4. Connect the cable and in the left down corner the USB name will apear;
5. Go to the directory that you extracted from the downloaded file and start ROMUpdateUtility_Wizard_NoID.exe (is in itallian, but there are the usual steps for upgrading ROM, so I think you'll manage).
After this, hopefully the upgrade Radio ROM process will start!
I'll repet myself, follow exactly this steps with attached file, this was my way and the only that worked for me!
P.S. Someone should delete the 2.63.90 Radio ROM file from th Prophet FTP, is dangerous and brakes your Prophet!
Click to expand...
Click to collapse

Radio 2.63.90 removed.
The Radio 2.63.90 has been removed. It is incompatible the Prophet. I'm going to continue to research these Roms. Thanx for the input.

Rom differences..

Could you please anyone explain to me wat's the difference between Radio Rom & Normal Rom.
i used to find Radio Roms... so is it compatible with my jamin or not. does it have any advantages!!!
thanx

smoken said:
Could you please anyone explain to me wat's the difference between Radio Rom & Normal Rom.
i used to find Radio Roms... so is it compatible with my jamin or not. does it have any advantages!!!
thanx
Click to expand...
Click to collapse
Radio ROM - Radio firmware
Contains the all of the drivers for radio equipment (WiFi, Phone, Bluetooth...​ROM - Main OS
Contains Windows.​
Both are device specific. Do not flash something not intended for your device!

Mr.l3v5y, i really feel shy for being Inquisition.
which ROM do u advice me to use......there is a lot of ROMs.
plz advice me.

smoken said:
Mr.l3v5y, i really feel shy for being Inquisition.
which ROM do u advice me to use......there is a lot of ROMs.
plz advice me.
Click to expand...
Click to collapse
I recommend you try some
My favourites at the moment would be:
Cloudyfas Build 19213 ROM
Gullums Throttle IV
Cloudyfas Build 19701 Full edition

Mr. l3v5y i tried Cloudyfas Build 19213 ROM as you advised. It was really amazing in the beginning. Suddenly, 2 days later the mobile's signal decreased to be zero & a message showed up says "the phone is off. Turn it on and try again" asking me to enter such as code. After trying many codes i tried to press CANCEL. The message disappeared but the signal didn't get back.
However, I couldn't reach to Phone from settings cause it force me to enter the code.
I downloaded to ROM one more time but no benefit.
What's the problem with it?

smoken said:
Mr. l3v5y i tried Cloudyfas Build 19213 ROM as you advised. It was really amazing in the beginning. Suddenly, 2 days later the mobile's signal decreased to be zero & a message showed up says "the phone is off. Turn it on and try again" asking me to enter such as code. After trying many codes i tried to press CANCEL. The message disappeared but the signal didn't get back.
However, I couldn't reach to Phone from settings cause it force me to enter the code.
I downloaded to ROM one more time but no benefit.
What's the problem with it?
Click to expand...
Click to collapse
Try to use a different Radio ROM (see the wiki )

Help ! Three Colour Screen...

I'm out of my depth and an need of some help to get my X7500 back into working order !
I upgraded my machine to AP4, carefully following the nicely documented instructions, and it worked a treat. The new interface looked great. However, for some reason my GPS application (i-GO Europe) wouldn't work at all. After searching the threads and not finding anything there, I thought it would be best to return to my old ROM version - the official HTC Advantage WM6 Upgrade. Naively I thought that this would be just as simple as running the Advantage_HTC_WWE_2.21.405.2_1.50.00.00_Ship executable - but I was wrong ! The update failed, and now I am left with a PPC with a pretty three colour screen...
ATHE100
IPL-v1.00
ATHE100 MFG
SPL-v3.50. OliNex
Is there any way that I can recover my device from this state ?

You have spl3.5
very easy to solve
just plug your athena to the PC and install a rom for SPL3.5 , there are several good ones, since AP4 didn't work for you and I cannot remember if AP4 can be installer from boot loader, the easy thing should be install the latest Michiprima rom (SPL3.5 not 1.20)
if you wish to install a original rom in the future remember to use spl downgrader to go back to SPL1.20
As always take memory cards from the device before playing and please read

Craigus said:
I'm out of my depth and an need of some help to get my X7500 back into working order !
I upgraded my machine to AP4, carefully following the nicely documented instructions, and it worked a treat. The new interface looked great. However, for some reason my GPS application (i-GO Europe) wouldn't work at all. After searching the threads and not finding anything there, I thought it would be best to return to my old ROM version - the official HTC Advantage WM6 Upgrade. Naively I thought that this would be just as simple as running the Advantage_HTC_WWE_2.21.405.2_1.50.00.00_Ship executable - but I was wrong ! The update failed, and now I am left with a PPC with a pretty three colour screen...
ATHE100
IPL-v1.00
ATHE100 MFG
SPL-v3.50. OliNex
Is there any way that I can recover my device from this state ?
Click to expand...
Click to collapse
Just reflash with a MICHY rom,any will do, but if you want to go back to SPL 1.2 then use THIS
However try Michy's latest r6.0 it is very good
Jay

PBL1 said:
You have spl3.5
very easy to solve
just plug your athena to the PC and install a rom for SPL3.5 , there are several good ones, since AP4 didn't work for you and I cannot remember if AP4 can be installer from boot loader, the easy thing should be install the latest Michiprima rom (SPL3.5 not 1.20)
Click to expand...
Click to collapse
Thanks very much for your advice !
I thought I had to have an ActiveSync connection to load a new ROM onto my device. But you were right - very easy to solve.

responderman said:
Just reflash with a MICHY rom,any will do, but if you want to go back to SPL 1.2 then use THIS
However try Michy's latest r6.0 it is very good
Jay
Click to expand...
Click to collapse
Tried the Michy R6.0 and it does look good. Still having problems with my GPS application though, so might have to go back to the original. Will play around with this one in the meantime.
Thanks for taking the time to make your suggestion.

Craigus said:
Tried the Michy R6.0 and it does look good. Still having problems with my GPS application though, so might have to go back to the original. Will play around with this one in the meantime.
Thanks for taking the time to make your suggestion.
Click to expand...
Click to collapse
In regard to the GPS have you upgraded your radio version above 1.5
Radio 1.57
or
Radio 1.58

lakeman said:
In regard to the GPS have you upgraded your radio version above 1.5
Radio 1.57
or
Radio 1.58
Click to expand...
Click to collapse
Very good point that may make all the difference
Jay

lakeman said:
In regard to the GPS have you upgraded your radio version above 1.5
Radio 1.57
or
Radio 1.58
Click to expand...
Click to collapse
Unfortunately not !
I ended up loading AP3, and my GPS application worked on that. Now I've gone back to the official WM6 ROM. When I have some time, I might reload the AP4 ROM and try the new versions of the radio - but I need a stable device at the moment.
Thanks again

i just remembered
i just remembered you have to disable htc home in AP4 for igo to work
Just load michys large htc home cab instead

god, got to love the community spirit

Up and Running
lakeman said:
i just remembered you have to disable htc home in AP4 for igo to work
Just load michys large htc home cab instead
Click to expand...
Click to collapse
> ROM Version: AP 4.0 Platinum
> ROM Date: 11/09/07
> Radio Version: 1.58.00.00
> Protocol Version: 32.91.70.20.20H
Just an update for those interested. I'm now running AP4 with i-GO happily running away. Not sure I needed to update the Radio version, but you were right - I had to turn off the HTC HOME in Today.
Thanks for the help from those more experienced. It was greatfully received and, although I haven't had time to really use the upgraded device in anger yet, I am currently very happy with it.
Just one last thing. Have you got a link for the said 'michys large htc home cab', as that would be the icing on the cake to have that lovely Home available.
Thanks very much !
Craigus

need help htc 8125

hi i was trying to flash my friends htc 8125 with the tutorial on this web and now i just have 3 color display or boot mode i think. im new this was my first time i flashet first with buton ... flash but not work error 302 but after i flash with alternative flash was in the tutorial and i get an error to so i dont know what to do how to repair
HTC CINGULAR 8125
IPL 1.05
SPL 1.05

I'm kinda of new too, but I believe you just have to pick the rom u want to flash up to. U r at the ideal ipl & spl. I just did that to mine about a week ago and then flashed it EXACTLY like forum said and then just update to 3.XXIPL & 3.XXSPl. After which I picked 1 of the TNT rOMs and wella! try to flash it up now

i dont know wheres to find the roms do you have a link or something

Have you CID unlocked yet?

Obviously not unlocked yet!
Cause he stucks on step 1 !
hahahaha upgrade an original rom... try the 2.26 tmobile not 3.08 please...

Hey Que
I will be getting T-Mobile any hour today...
I will be following all the instructions and try to use a Cingular card on it.

I'm trying to decide what to use for updating the rom on this 8125 the ipl reads 2.25 the spl reads 2.25. in the tutorial there isnt any mention of these that I can ascertain. the other numbers are os 2.25.11.1 gsm 02.25.11
Is this even a necessity. The unit shuts down and is very difficult to get restarted, seems to be a good unit, just looking to make it more reliable. Thanks in advance for the help.

hydafl said:
I'm trying to decide what to use for updating the rom on this 8125 the ipl reads 2.25 the spl reads 2.25. in the tutorial there isnt any mention of these that I can ascertain. the other numbers are os 2.25.11.1 gsm 02.25.11
Is this even a necessity. The unit shuts down and is very difficult to get restarted, seems to be a good unit, just looking to make it more reliable. Thanks in advance for the help.
Click to expand...
Click to collapse
Your phone is running the official cingular stock rom and has official IPL/SPL 2.25 (Bootloaders),its nothing to be worried about,now it depends if you prefer to reflash the official wm5 rom or wud like to upgrade to latest wm6.1 custom build roms.
If you want to keep official then download the official wm5 stock rom and simply flash it,but if you desire to upgrade to latest wm6.1 rom,as no official wm6 roms are provided,therefore,you'll have to flash a custom build wm6.1 rom,and for that you'll have to get your phone CID unlocked.

my phone is in boot mode i dont have the roms im new wheres can i find the rom that you say the tmobile my phone was with the original cingular rom or where can i find the original one

mmmmm ok!
I dont have the link but you an enter in wiki section for wizard... is a thread that said wizard goes wiki click there and then it tooks you to the wiki pages! there... you can found a link that takes you to the original roms... choose the one you see for cingular..... some links are broken so dont desperate maybe we can found other one... if you dont get it there you can choose the search tool just follow my steps on my signature says The XDA search culture...
Dont be afraid men you only need to use some more things to start unbricking your phone... (I hope so) many things tooks time cause we dont read enough now lets work men!!!
Well avoiding duplicatted posts this is gonna change many times
Here is my RUU without ID http://forum.xda-developers.com/showthread.php?t=429327&page=9
I didnt found the cingular but try to unzip the exe file with winrar... the nk.nbf can be cutted and pasted in the RUU folder to upgrade it without ID vendor permissions... we will on touch men!

Xplain more
Xplain more of your problem remember that unlock upgrade flashing dids most be done on XP and without SIM and MiniSD pluged... be sure your batt is full charged and your USB cable dont have troubles.
Can you privide more info abour exactly what you have done... please men we need all you got
OH remember not to use so much your phone on Bootloader screen cause we need the batt almost 70% to downgrade unlock and upgrade again it dont charge in RGB screen.

About getting official Wizard Cingular ROMs.
I called HTC and Cingular they say that HTC is not licensing the Wizard WM6 from Microsoft anymore, so they are not supplying the ROMs for the public.
No official support from Cingular/HTC on Wizard for WM6 or 5 for that matter.

I'm new to pdas I've only ever had cell phones so with that in mind its confusing as to where to start. I'm electronic savvy when it comes to car repair, however some of this is daunting at best. I'd like to take this semi-bricked wizard to the next level.
Everytime I find what I'm looking for the webpage is obsolete, what to do?

hydafl said:
I'm new to pdas I've only ever had cell phones so with that in mind its confusing as to where to start. I'm electronic savvy when it comes to car repair, however some of this is daunting at best. I'd like to take this semi-bricked wizard to the next level.
Everytime I find what I'm looking for the webpage is obsolete, what to do?
Click to expand...
Click to collapse
First,always post the DOC Chip version of the phone,what is the IPL/SPL of the phone.
Secondly,what exactly is the problem and what you want to do ?

the ipl/spl are at 2.25 and the specific problem is that wen in hibernate mode the only way to work with it is to remove the battery to restore functionality, then that resets the factory settings of time and date and also drops calls etc.

hydafl said:
the ipl/spl are at 2.25 and the specific problem is that wen in hibernate mode the only way to work with it is to remove the battery to restore functionality, then that resets the factory settings of time and date and also drops calls etc.
Click to expand...
Click to collapse
Its a G3 version,download the official stock wm5 rom from here and flash it:-
http://download.america.htc.com/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe
But,if you want to upgrade to latest wm6 then follow this link and do it correctly as the guide reads :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Good luck

Well I think its bricked no screen and no charge light, should I buy a new battery or just sell it for parts? I really tried to find the correct place to update and I goofed what can I say its my responsibility, is thereanymore I can do from this point?

hydafl said:
Well I think its bricked no screen and no charge light, should I buy a new battery or just sell it for parts? I really tried to find the correct place to update and I goofed what can I say its my responsibility, is thereanymore I can do from this point?
Click to expand...
Click to collapse
G3 devices don't get Bricked like this,by just flashing a rom,untill and unless you have flashed any G4 IPL/SPL on it,otherwise,G3 phones never get Bricked.So most probably its the battery,try to get the battery charged or get another battery from a friend and confirm it.

As an update and thank you very much. I purchased a new battery and the the store was good enough to pre charge it. We installed the above official wm5 file and its currently going throuh re updating itself. I did happen to notice that it now has an AKU2 file. Is this an update over and above what I had originally?
Once again thanks....
Are there any problems with 3G sim cards because when I installed the card the phone reacts as if there is no battery. No charge indicator or any activity.
Problem solved, it helps to have the sim card properly seated.......

Thanz!
You are most welcome,glade its working.
Yes,the above rom is AKU 2,its an upgrade to your previous official Rom,always try to keep the battery fully charged,as it creates many problems if it gets below the required retention charge of 30%.
Try out the Guide I posted above and see if you can get it CID unlocked and upgraded to latest wm6.1 rom,thats where the fun begins....!