Database Users

Please help me! XDA2 keeps softreseting!

Hello!
I have great problem with my XDA2(1.72 iMate, Radio 1.14)! After instaling MyMesages from JGUI and performing a softreset my device keeps softreseting after cca. 2 seconds after startup again and again! Can anybody of you experienced people help? BTW: HardReset is my last option! Please help me!
Thanks a lot, Petr.

:arrow: do an hard reset

DJFreax said:
Hello!
I have great problem with my XDA2(1.72 iMate, Radio 1.14)! After instaling MyMesages from JGUI and performing a softreset my device keeps softreseting after cca. 2 seconds after startup again and again! Can anybody of you experienced people help? BTW: HardReset is my last option! Please help me!
Thanks a lot, Petr.
Click to expand...
Click to collapse
1. hard reset
2. restore from previous checkpoint backup
What do you mean you don't ever back it up?

Thanks for advice but my backup is little bit old. Yes, i know-my bad! Petr

New Rom Installed Blocked My Pda

Hi,
I am writing because I have some problem with my Qtek S200.
I have downoladed on this site a new ROM wm6pdamobile, I have installed it, and now my pda is blocked on a white screen.
When it starts appears the normal HTC page, the check of OS, GSM etc., and then.... nothing... only a white screen.
What I can do?
How I can format my pda? It doesn't works with active sync, because it can't take a valid IP, and so I can't reinstall a precedent ROM version.
Please help Me!!!!
Thanks

It is important to hard-reset your device after upgrading. Have you done hard reset? If not do it.

mine oso
i have installed WM6
i had hard reset..
but.. it goes to Align Screen
and stuck !!!

looool, u must reinstall a new rom.. dont ask me how..

Problem after upgrade to WM6. Please help!

I have serious problem with my PDA SPV M2000 after upgrade to WM6. After upgrade i try to restart my PDA with Hard Reset, but can see only 4 collored screen. I can acess only bootloader mode and nothing else... PLEASE HELP

reflash
Did you try a reflash?

I try all the steps 5 times but nothing. I try use WM6 from helmi and xpode. With the same resolution. Now i try to downgrade to WM2003...

I am back on WM2003. Thanx god

I got a gray screen whith serial v 2.07... and few pages i find dosent help me att all..... please help me some one....

brb66 said:
I got a gray screen whith serial v 2.07... and few pages i find dosent help me att all..... please help me some one....
Click to expand...
Click to collapse
the grey screen with serial v 2.07 is the bootloader mode...
maybe a reflash will do the trick...
how did you screw up the upgrading process? did you accidentally unpluged the cable? is it a corrupted file?
I have never experienced this, but, if i were you, I would reflash it. if nothing good come up,then maybe the file you are using to upgrade is corrupted...
hope this helps, and maybe the experts would have more ideas cause i am just a user.....

I've upgrade to WM6.0 pdaviet, but can't use GSM network : no services...
Any body help me plz...

fix it now, pdaviet'rom works well with 1.15.00 radio .
sorry for my English

Ibhave a tmobil MDA amd i did an upgrade to windows mobile 6 and now my MDA is slow in most of the programs also the SMS when inserting any messages the words do not show after at least 10 sec.
Please, definelly need help.

navarde
Have you performed HARD RESET?
What ROM did you use for flashing?
(also some installed programs may slow down your device a lot!)

I had the same problem. From time to time whem im flashing my phone its happening. After few soft resets it'll be ok.

i kill my pda2!! please help!!

Guys, i accidently upgrade my pda2 device with a BA rom.I use helmi's wm 6 rom for BA to my pda2 (alpine) it completed the flashing process. now it's dead! no charging light when i try to charge, non of the buttons work, nothing happen when i try to reset, hard reset or other combinations. is there any way to get it back? how can i enter the bootloader menu again?

croesus said:
Guys, i accidently upgrade my pda2 device with a BA rom.I use helmi's wm 6 rom for BA to my pda2 (alpine) it completed the flashing process. now it's dead! no charging light when i try to charge, non of the buttons work, nothing happen when i try to reset, hard reset or other combinations. is there any way to get it back? how can i enter the bootloader menu again?
Click to expand...
Click to collapse
there is no accidently u tried to update stupidly to wm6, there is no excuse for this, and you are now the proud owner of a totaly buggered pda.
serves you right realy, as if you read the forums, u will find there is no wm6 for the xda 2i, and the file you would have used will have stated that it was wm6, 1000%
there is no way of getting it back now... HAHAHAHAHAHAHA!
well unless u can plug it into your pc ang run the 2003se rom.
p.s. how stupid.

Hi!!! I Have the same problem but 1 difference I dont want to update anything ... My PDA was stop and I take out the batery and now is dead no light or system ... what can I DO? HELP ... When I plug in in my PC ... dont do anything

plz help Sp3i freeze on wm splashscreen & cant reflash by USB

my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.

Your phone can be reflashed with Mtty even when it freeze on the boot screen cause its not necesary have the phone ON.
Tried to do a hard reset maybe is a windows registry problem.. after the hard reset the values on registry will be reset to default.

already done that, and doesnt work, even it reflashes through USB but afther reaching 100% the phone restarts and get stuck again in the same place, no matter if I hard Reset or reflash by USB the phone still get freeze.
can any one tell me how to delete all the data on the memory to make a clean reflash? or how do I reupload the firmware? is there a way to recover the phone?
remember I already install the WM5 and back to WM2003SE but after that the problem started, maybe i screw someting wile doing it?

Solaris_irc said:
my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.
Click to expand...
Click to collapse
Tutorial for sd flash
Check here