Hello,
I'm using JBED (v. 02.2008 downloaded from this site) on my Axim x50v.
I noticed whenever an applet tries to connect to the Internet (via BT via phone/gprs) it gets disconnected very often. At least 5 tries are required before the phone actually connects to the Internet and still I get disconnected randomly.
The phone, connection, network coverege, is definately not an issue here. Besides the very same applets work perfect using jeodeck (no problems connecting, no sudden disconections).
I recon the problem may be a short waiting time before connection retry, which is somehow set within JBED.
Anyone has any idea how to solve this problem??
Best regards
fbifbi
Yeah, I have the same problem .
Related
Hi all!
I have installed the WidComm stack, but since then I cannot use my i-mate as a GPRS Dial-Up Modem. When I select Dial-Up from the Bluetooth devices, after some seconds it pops up a window where I can enter my username, password and the number to be dialed. But when I press Dial, nothing more happens, just a window pops up saying "Dialing *99#..." but then I get an error message "Error 692: There was a hardware failure in the modem...".
I tried it with and without Hardware flow control etc., with and without AT command +cdgcont=1,"IP","internet",0,0 still no success.
On the other hand my old MS Stack lost its SSA profile somehow, so I cannot connect through that one either anymore.
Since noone is saying anything about this issue, I assume everybody is happy and has it working, am I right? :wink:
Any ideas? :?: Please help, I need it badly... :?
Kristof
I have the exact same problem. Have you found the solution?
I think it's caused by the widcomm stack that was extracted from a non phone-edition ppc (which of course cannot be used as a modem). maybe the extracted stack from a hp 6300 works?
Funny thing is I also can't connect via IR.
l did a hard reset & voila, I can use my xda2 as a wireless bluetooth gprs modem again.
Putra,
really ? after a new format u were able to connect using GPRS and USB without any problems ?
I' have the same problem with my i-mate k-jam latest WWE rom...
Error 692: There was a hardware failure in the modem !!!
And the connection were dropped down...
Maybe could be the SPB GPRS Monitor program ?
I've disabled all possible thing related to ActiveSync and Usb connection , either on pc and my k-jam....
I'm goin' to be crazy !!!
Only one time i was able to connect for up to 2 minute, without any problems... and then, after i've tried again to estabilish a new connection, i won't be able... it sais Error 892.... !!!
Anyone Could Help me ?
Thanks a lot in advance...
Raid.
sorry...
Sorry there, but it was so long ago, I cannot even remember what I did.
I have upgraded to the Prophet since Jan, and no longer using the Xda2... it's now my backup in case something happens to my Prophet.
The Bluetooth connection works fine... but sometimes the modem still "hang" and i got Error 692 or TCP Error 743... it seems that the major problems are caused by the ActiveSync, when i disable the USB connection either on my phone and on my laptop everything goes fine...
With the USB connection....no way at all ! After 2 minutes the connection is terminated.... even if i've disabled ActiveSync USB connection...
Hope this helps....
Alessio.
Nothing to do....
Also using BT stack (Microsoft) after few minutes my wireless modem seems still connected, but i cannot send/receive packets over the internet.
It seems like frozen !!!
And after i've clicked the "Disconnect" through the dialup connection icon on my task bar, my wireless modem doesn't respond anymore... i need to reset my device and sometimes this doesn't works at all, Windows stop responding while i'm trying to open the "Network Connections" panel... after the timeout completed and the dialup is disconnected i can open it again !
What's the problem !?
I'm downloading the new Dell BT stack for my laptop... i'll update you again...
I cannot figure the problem is my device... i can surf with opera beta for WM5 without any problems !!!
I solved the problem....
I've upgraded my MS BT stack with the Dell BT stack new update (Latitude D410).
Everything seems working fine now, i can stay connected above 15 minutes now... in this moment i'm writing throught my EDGE connection
I cannot use the USB modem... after 2 minutes i cannot send/receive packets anymore... i've disabled ActiveSync either on phone and laptop !
Some one could help with the USB and my Wizard?
Thanks.
A.
Yesterday I was browsing the net normally as I do it every day at the same time and a little bit later began the problem: As the thunderbolt from a clear sky the GPRS connection stops answering my requests, Cannot connect everytime and when it is finally connected,then it does no traffic. That means:
-No E-Mail
-No Messenger
-No internet
-No WAP
-No MMS's
...No GPRS at all.
The connections are adjusted correctly(I did no changes when it began).
I have meaned,that it is a network problem...but wasn't. I've tried another phone to connect and successfuly. Evening tried also hard-reset. No solution. Now I had to re-flash the radio stack(2x). Again without solution. Tried use WirelessModem app. to connect to the internet. Successfuly connected,but again no traffic(only small upload I've noticed-no download) that results to a message,that the page cannot be found.
Yes forgot:Today morning was all OK and therefore I have thought,that was really a network problem. But after a little while was it back. Now I know,that the network is out of game.
Can anyone help me please,how to solve this BIG Problem?
The radio stack I am currently using is:1.18.
Hi guys,
I'm all new to your forum...
I have the o2 xdII, xdaIIs and now i'm using the xda Exec.
I have a strange problem that even o2 technical support team can't fix...
When i start internet explorer it will connect to either gprs or 3g (whatever is available). when i finish browsing the internet, i just close internet explorer and then close the connection by clicking the disconnect button. Where my problem is, is when i want to reconnect to the internet again (say 5 mins after i close the last connection), i cant get any connection whatsoever. I have a good receiption (gprs and 3g). And i have this weird message :
Dialed: mobile.o2.co.uk
The answering modem has disconnected. To check your connection settings and change them if needed, tap Settings.
So after a lot of talking with o2, i still have this problem.
I have tried to uprgrade to the new rom, and nothing, i have change the settings of the cennection, still nothing. i even changed the handset as i and o2 thought it could have been a faulty handset, but still nothing...
The only solution at the present is to do a soft reset everytime i want to connect to the internet... Its very annoying !!!!
Would annyone have a solution ??? Please ?????
Thank you in advance for your help....
Personally; I wouldn't suggest closing the connection and you won't get charged any extra.
this is easy to fix, but you will lose some software you've got installed.
I had this problem and have worked it out to be conflicts between software that handles the phone line. I had mortring, phonealarm and photo contacts pro installed and my gprs would not reconnect after the 2nd attempt. Putting the phone into flight mode and then back into normal mode would allow gprs to reconnect but only once.
So I uninstalled the above 3 applications one by one and found the gprs would reconnect great with only one installed (any one it didn't matter)
So try removing software that handles the phone line until your gprs reconnect works.
Daz
I want to setup my P3600 (English ROM) as a 3.5G modem for my PC but not successful yet. The Telco service staff has no idea too and pass me a manual for dopod 838 pro. The mentioned programs are not there, nor in my dopod D810 CD.
I can:
- Activesync using USB
- Activesync using bluetooth
Question:
- Should I use the same HTC modem dialer on my PC for XDA?
- Should I use the Start->Program->Internet Sharing?. It allows me to choose bluetooth or USB to PC but both not working too after connect.
Anyone successfully connect their PC via P3600 using HSDPA, pls share the steps. Many thanks.
Eventually, I figure it out myself.
Forget all the HTC modem dialer or wireless modem program as in Xda.
1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Thanks very much for reporting this info back, it will come in useful when I get my trinity!
mobiler2 said:
Eventually, I figure it out myself.
...
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Click to expand...
Click to collapse
just 2ยข...
Sadly, because Internet Sharing is actually a NAT server running on your phone, it could prevent you from using 'classic' VPN. You can find more details by googling for 'VPN over NAT'.
for VPN purposes you can always use old good wireless modem mode. it works well.
I don't think it is related to NAT. As long as the VPN ports are opened, it should work. I am using a Wireless router at home and no trouble at all for using VPN under NAT.
Checked with telco. They can enable it for me with extra charge/month. and also the traffic would be charged as expensive GPRS plan. What kind of service!!!
Think twice before subscribing. I used "WonToFee / 1-1-" . The sales that say it can work for VPN may not even know what a TCP port is.
Anyone has use VPN over HSDPA with another telco? e.g. SMOOTH TONE
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
shefful said:
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
Click to expand...
Click to collapse
Hi shefful,
I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.
regards
Adam
shefful said:
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
Click to expand...
Click to collapse
Hi shefful,
I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.
regards
Adam
Hi adamwolfe,
Thanks for your help, unfortunatelly this is not the solution to my problem. The GPRS connection ends (according to the icon on top of the screen), but the status keeps displaying "Connected". The application stops responding and can't be stopped from Settings/Memory/Runnning Programs.
Hi shefful,
Yeah, I have the same problem too. Looks like the program freezes in the Connected status. Even tried terminating Internet Sharing with Start/Settings/.../Memory/Running Programs and relaunching Internet Sharing.
Sometimes I get a popup message saying the remote host has terminated the connection before the program hangs. I think this may be the cause of the problem. Which mobile operator are you on?
Rebooting is the only solution so far. Fortunately the Trinity reboots in 20 seconds - one of the fastest in the PPC market I think.
Hi ayhansan,
For other reasons I needed to hard reset my Trinity and the freezing problem has disappeared. I don't know what had caused this problem, I just hope it won't happen again. If I disconnect the USB cable, the status changes to "disconnected" and I can always reconnect.
same problem here
i am connecting to laptop thru USB
after I disconnect UMTS phone syaing still connected
and want kill Internet Sharing
???
thanks
regards
mobiler2 said:
Eventually, I figure it out myself.
Forget all the HTC modem dialer or wireless modem program as in Xda.
1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Click to expand...
Click to collapse
does this work with Mac as well?
I do have Problems with my wireless Lan connection these days,
I won an accesspoint last week and it's working perfect for my notebook and even for my desktop pc via wlan. everytime i connect with my wizard the conncetion aborts as soon as i start to "use" it.
Normally i use Gprs for updating weather RSS Feeds etc, so i didn't really test Wlan function at all since now.
Yesterday i went to some other Hot-Spots but the same fault occours at every spot.
so i am able to establish the connection but i get disconnected as soon as i start an application that uses this connection(opera mini, weather panel etc).
I was not able to test another rom because i don't want set up the whole device again.
so there's another little question beside. Is there an easy way to grab the whole rom from my wizard, so i simply test another rom? radio rom is not important.
any suggestions welcome,
thanks
Florian
Let me guess: You're using the AT&T rom, right?
Here's a fix (if you can call it a fix)
Click Me! I'm an AT&T FAQ page!
On this note, does anyone know if there is a version of the Proxy Manager for the wizard (WM5), and if there is where I can get a hold of it?
thank you for the reply but i am using wm6 with mfrazzzs rom,
the problem is that i am able to establish the connection for a short period of time. (enough to update weather) but the W-Lan connection aborts and i have to reconnect.