I do have Problems with my wireless Lan connection these days,
I won an accesspoint last week and it's working perfect for my notebook and even for my desktop pc via wlan. everytime i connect with my wizard the conncetion aborts as soon as i start to "use" it.
Normally i use Gprs for updating weather RSS Feeds etc, so i didn't really test Wlan function at all since now.
Yesterday i went to some other Hot-Spots but the same fault occours at every spot.
so i am able to establish the connection but i get disconnected as soon as i start an application that uses this connection(opera mini, weather panel etc).
I was not able to test another rom because i don't want set up the whole device again.
so there's another little question beside. Is there an easy way to grab the whole rom from my wizard, so i simply test another rom? radio rom is not important.
any suggestions welcome,
thanks
Florian
Let me guess: You're using the AT&T rom, right?
Here's a fix (if you can call it a fix)
Click Me! I'm an AT&T FAQ page!
On this note, does anyone know if there is a version of the Proxy Manager for the wizard (WM5), and if there is where I can get a hold of it?
thank you for the reply but i am using wm6 with mfrazzzs rom,
the problem is that i am able to establish the connection for a short period of time. (enough to update weather) but the W-Lan connection aborts and i have to reconnect.
Related
i read pages of threads on this forum, but im not getting nowhere fast!
I'll start at the begining, mda t-mobile original rom, working as it should, upgraded the rom several diff ones and not working, tryed the origainal rom and not working!
rom now on the mda,
ROM version 2.8.7.1WWE
radio version 01.13.10
protocal version 4.0.13.24
ExtROM version 2.8.7.101
ive intsalled DJVW WLAN 302.11g Activator 1.0.cab
Now the problem, when the wifis switched on it takes awhile to even detect the network, my old ipaq would be conected as soon as switched on?
when it does detect the network it trys to conect for about 2mins then gives up ( in same room as router )
it wont conect but i can see the mda has downloaded about 20kbs of info, but can get no further?
Am i missing something here?
Also where do you go to check you have the latest drivers, updates, newest rom etc
Thanks for taking the time to read this :wink:
Hello,
I have found that i am having similiar problems with Wifi after updating to the latest qtek 9100 ship ROM on my qtek 9100 device.
the device can "see" the WIFI but it will not/connot "use" it.
Ya same here. I can turn on the wifi but it doesnt connect anymore ! I know fopr sure that there are at least 4 wifi connections around me normally but I dont see any of them !
I had this problem but was able to fix it by giving my router my DNS settings (that I got from my ISP).
For some reason, certian routers will not serve the MDA with any sites unless it has the IP address of your ISP's DNS server.
This should take care of your problem.
If this doesn't work, go to your public library and see if you can get on their wifi. This will help you troubleshoot to see if there's actually a hardware problem.
Actually the problem i had is unusual in that i could connect to any open WIFI zone aswell as our work and home one, BUT it will not carry any traffic AT ALL. Only uses GPRS NO wifi.
I actually hard reset the device yesterday and ensured that Push email was switched off - WIFI is functioning fine now.
There is still one problem. When i cannot the device to my PC for an active sync. It will sync with the PC but throw an error when trying to sync with exchange server via the WIFI.
The error on the PC active sync is
"The server could not be reached. This can be caused by temporary network conditions
SUpport code:85002003"
It also throws an error on the device.
This is a right pain and did not happen on the previous version of the ROM. It means i have to do a seperate exchange server sync when disconnected from the PC. ANyone have ideas on how to fix this.
Incidently, another thing I have noticed with the NEw ROM is that contact lookup is noticeably slower - sometimes I have to wait for a few seconds
before the contact i am searching for actually comes up. This is in comparison to the immediate results of searches in my old ROM.
Jass
right ive reload a rom, and the wifi works, then after adding each of my aplications, ive tested the wifi conection, i found wififofum being the problem.
now i know the developer of wififofum has an wizard himself , that runs this aplication no problems, ut on mine it seems to just freeze the wifi, giving a rssi signal of 90 no matter how close or far im from the source?
http://img.photobucket.com/albums/v12/XRfil/mdawifi.jpg
I want to setup my P3600 (English ROM) as a 3.5G modem for my PC but not successful yet. The Telco service staff has no idea too and pass me a manual for dopod 838 pro. The mentioned programs are not there, nor in my dopod D810 CD.
I can:
- Activesync using USB
- Activesync using bluetooth
Question:
- Should I use the same HTC modem dialer on my PC for XDA?
- Should I use the Start->Program->Internet Sharing?. It allows me to choose bluetooth or USB to PC but both not working too after connect.
Anyone successfully connect their PC via P3600 using HSDPA, pls share the steps. Many thanks.
Eventually, I figure it out myself.
Forget all the HTC modem dialer or wireless modem program as in Xda.
1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Thanks very much for reporting this info back, it will come in useful when I get my trinity!
mobiler2 said:
Eventually, I figure it out myself.
...
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Click to expand...
Click to collapse
just 2ยข...
Sadly, because Internet Sharing is actually a NAT server running on your phone, it could prevent you from using 'classic' VPN. You can find more details by googling for 'VPN over NAT'.
for VPN purposes you can always use old good wireless modem mode. it works well.
I don't think it is related to NAT. As long as the VPN ports are opened, it should work. I am using a Wireless router at home and no trouble at all for using VPN under NAT.
Checked with telco. They can enable it for me with extra charge/month. and also the traffic would be charged as expensive GPRS plan. What kind of service!!!
Think twice before subscribing. I used "WonToFee / 1-1-" . The sales that say it can work for VPN may not even know what a TCP port is.
Anyone has use VPN over HSDPA with another telco? e.g. SMOOTH TONE
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
shefful said:
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
Click to expand...
Click to collapse
Hi shefful,
I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.
regards
Adam
shefful said:
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
Click to expand...
Click to collapse
Hi shefful,
I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.
regards
Adam
Hi adamwolfe,
Thanks for your help, unfortunatelly this is not the solution to my problem. The GPRS connection ends (according to the icon on top of the screen), but the status keeps displaying "Connected". The application stops responding and can't be stopped from Settings/Memory/Runnning Programs.
Hi shefful,
Yeah, I have the same problem too. Looks like the program freezes in the Connected status. Even tried terminating Internet Sharing with Start/Settings/.../Memory/Running Programs and relaunching Internet Sharing.
Sometimes I get a popup message saying the remote host has terminated the connection before the program hangs. I think this may be the cause of the problem. Which mobile operator are you on?
Rebooting is the only solution so far. Fortunately the Trinity reboots in 20 seconds - one of the fastest in the PPC market I think.
Hi ayhansan,
For other reasons I needed to hard reset my Trinity and the freezing problem has disappeared. I don't know what had caused this problem, I just hope it won't happen again. If I disconnect the USB cable, the status changes to "disconnected" and I can always reconnect.
same problem here
i am connecting to laptop thru USB
after I disconnect UMTS phone syaing still connected
and want kill Internet Sharing
???
thanks
regards
mobiler2 said:
Eventually, I figure it out myself.
Forget all the HTC modem dialer or wireless modem program as in Xda.
1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Click to expand...
Click to collapse
does this work with Mac as well?
Traded up(?) to the Niki from a Tornado, I use push email from the works exchange server, over Vodafone contract GPRS, the Tornado was always great for this.
Setup the Niki with the same GPRS settings, when I turn it on everything works, push email, internet browsing etc. After a while it stops working, can't sync, can't browse the web, or even get a weather update. Though it still says it's got a good GPRS connection.
Switch off and back on and it all works again for a short while, then same again.
I've even flashed wioth Tom's ROM to see if that improved things, still the same.
Stoping and starting the GPRS connection doesn't help.
Proxy, DNS, other issue ?
Any ideas ?
I have the same problem. The only way to restore it in my experience is by activating 3G in the comms manager (or restarting). From there the phone will log off from the data connection and log back on again. From the searching I've done it seems to be a problem related to WM6. I also use push mail and, when this happens, it's very annoying. Haven't found a solution yet. I've tried an alternate DNS address (still nothing), I've tried upgrading the radio to a Kaiser ROM (same problem), and I've tried using Toms ROM (still the same problem). I was hoping that upgrading the radio ROM would solve it, but it hasn't. I'm going to try and have the phone on 3G all day and see if it drops out of connection. If it doesn't then that would indicate some problem with the GPRS side of WM. I don't think it's a setting thing, but I could be wrong. I wish I could find a solution though because I'm considering moving to an N95 8Gb...
I have the same issue,
see my post http://forum.xda-developers.com/showthread.php?t=374226
but with no reply...
When it occurs I can switch off the phone part (plane mode), but I can't switch back on, it stucks to plane mode... I've to shutdown the device to be able to restart a good data connection.
Maybe a WM6 bug... or radio rom issue .. I dunno
Thanks both,
I've changed the radio rom to this one, RUU Nike Radio 1.64.08.21K , which is a hacked Kaiser one, seems a bit better, still a low signal, but quicker reconection, and the GPRS stays up longer.
Vodafone UK
Tom's Rom
RUU Nike Radio 1.64.08.21K
Cheers.
GPRS connectivity issue
Same issue here. Push mail, GPRS, internet stops working after a while. Sometimes it works for a day or less. I place it into plane mode and then turn off plane mode. and it usually works. Sometimes i have to reboot the whole thing, but not very often.
The display still shows G in the top box, but doesn't work.
Anyone have any fixes, or suggestions...
OMG, didn't know that this is a common problem.
Waiting for the SE XPERIA X1.
Hello,
I do have here a problem on WM6. Every time to time my device connects to the internet (GPRS) and stays connected.
I have installed the nodata application, ans disabled the GPRS connection. It works ok, but the device becomes very slow to respond the commands after a while. Some application is trying to connect to the net. Connmgr.exe process is getting almost 100% cpu usage.
I have disabled every automatic update, activesync and son on but the problem remains.
How can I find which app is trying to connect?
Regards
Cabiri
my 2 cents
connect via your activesync/device manager, and get online via your desktop internet connection. now with netstat -b or any packet capture tool, try to find out where it is connecting. you will get an idea about the prog from remote address. like if it connects to msn.com, it'll be live messenger.. something like this.
you can also use a advanced task manager on the phone to check which applications are running in the background.
hope that helps
Thans, I will try both soluctions.
Cabiri
same problem here. this is happening to me just last few weeks. i can't remember if i was messing with some options in any program, but even if i did i was just turning off automatic connections since i don't like them. i also tried to uninstall my latest software, but that didn't help.it is possible that it is some kind of malware, but kaspersky antivirus did not find any problems. i hope that someone will find solution for this becouse it is very annoying.
p.s.
if this causes significant data transfer you can go to Settings/Connections/Connections -> Advanced tab -> Select Networks, and change settings to "My Work Network"
if you have a weather update, this maybe the one triggering your mobile to connect to the Internet. just turn the Automatic Update off
no, it's not any weather plugin since i removed them long time ago. and when i used them automatic update was turned off. however, if weather plugin try to auto update and if it fails, then you get an error message. this one looks just like it continuosly try to connect and it uses almost all CPU until it gets connected. whatever this application is it looks hostile and i don't like it. the war is on!
thanks for help anyway
Hi,
I even disabled the HTC today plugin... and it remains doing the same.
Until now I had no chance to track the traffic, I will try on the next days.
finally i found the solution for my problem. seems like windows live messenger is causing all my problems. i found that phone is trying to connect to internet only after using wlm. usually after i'm finished using wlm i just terminate the program. and this is the problem. i should first sign out, and then terminate wlm. after this everything works just fine. so be sure to sign out before terminating wlm. i'm sure that this is the problem because i've tested my theory few times and i guess that this is it.
i hope this helps to you. if it does please report here
Yeah I have the same issue, i believe it's been on several version of Windows live messenger, actually, it's even on the version I have of WM6.1 (I have an Elfin with the blue elves rom from xda which has wm6.1)
it's quite sad that msft hasn't fixed this yet, it henders the phone completely useless and seems like it should be something easy to fix, stupid WLM should just not retry so brutely
anyways, actually if you change WLM to "manual" instead of "as items arrive" that does the trick too, but then now your push mail is gone ;( lame!
I really enjoy the DCD Rom especially the Internet connection/tethering function which I am using now. The only issue I have when I want to use it quickly ActiveSync wants to connect. Last time I did the Internet Connection while Sync was in process is screwed my data in Outlook so I just wait the process out now.
How can I set ActiveSync to not auto connect when the cable is attached? The whole issue for me is getting straight to Internet Connect. Or is there another option?
Thx
found an answer...
this cool app will remove and stop AS so now I have full control of when AS runs & not run...
http://micrologics.co.uk/library/ast/