Related
hi im sorry if i ask a questian who already asked i guess.
Iv been searching for an answer but did not find any.
I´v tryed to update my rom on my qtek 9100 so i could get WM6 in to my device, but it´s always stops at 99% when im installing. so now when i turn the device om i just have the screen whit 3 diffrent coulors on, so pleace any one can you help me get WM6 in my device or else i have to jump on it and throw it in to the trash. Sorry for my poor english im an swedish idiot...
Best reegarde Andreas...
I presume that your phone is still SIM/CID locked.In order to get your phone upgraded to wm6,its required to have it CID unlocked first.
Which is your device, G3 or G4 ? Post IPL/SPL...?of the phone here,to determine the G3 or G4 version of the phone,cuz for CID unlocking,both have different methods.
Cheers!
Cant start it now... Im realy angry at that little thing now...
its all black in the display. Do you have any good thing to do about that?
got it started for just a 5sec then its blck again... done that about 3 times last houer but it want start...
When it gets like this is there no more to do other then throw it in the trach?
or is there hope , can i do like a hard reset or something?
YES got it startd, wsa the battery who was out of power...
im looking up my IPL/SPL now....
IPL 2.17
SPL2.17
Its a G3 i guess....
Andyswe said:
YES got it startd, wsa the battery who was out of power...
im looking up my IPL/SPL now....
IPL 2.17
SPL2.17
Its a G3 i guess....
Click to expand...
Click to collapse
Yes !
Its a G3,download the official stock rom of your carrier from its website,get the phone into bootloaders (multicolor screen),connect via usb cable,watch small usb appear at the bottom of the bootloader screen and run the RUU,let it complete and your phone will boot up to default status and then download WST tool and run the 'CID Action' button to verify the CID lock.unlock status.
But always get the battery charged before flashing.
Cheers!
Has installed the TNT rom now latest.
Hov do i get the HTC look whit a digital watch??
I assume you mean the HTC Touch clock. It's really a lot more than a digital clock.
Try this: http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v1-0.html
which rom shall i use if i want a clean WM6 and install the htc Home plugin.?
Well, finally I get my device running up again! Unfortunately I wont publish it, maybe I will charge for total solution.
If u are interested, contact me by PM. This is a mail-service, so u have to send your device to me (so you pay for package sending)
Device OS recover 100%, Phone part recovered too.
Dont know If unlocks too bcoz my bricked device was unlocked state. Anyone that wants to send me a locked Herald (to test if unlocks too), would be really appreciated.
Thank you everyone for your support+post and if u want to donate, come on! Its time
See ya s00n
ps. for the Technically Experience devs/users, solution is not what u think its more complex and easy than you'll know!
wait....how did your herald get bricked?
i assume it was during a failed HardSPL
yes dude unfortunately
but the main here is to recover OS area... at least
I bricked mine and have just ubricked it. Its easy, connect USB to PC, enter bootloader, run any RUU wizard.
* Enter bootloader - Press and hold the camera key, then press the soft reset button. Hold the camera button until the bootloader menu shows it. You will see 3 different gradient colors.
For details check http://forum.xda-developers.com/showthread.php?t=327046
Good luck
if the above does not work, try flashing using the USPL
tramuyo said:
So I started this. Sounds crazy, but it can be done...
Click to expand...
Click to collapse
Hi,
I think, it's a good idea. Actually I thought about something like your thread but if you don't mind I will say something in your thread.
I've got the same problem as you've got. Moreover, I've seen a lot of users posting on this forum, which have got such a problem with their Heralds. They boot only in tri-color bootloader mode and even RUU dedicated to our models doesn't work, saying Error 300. When we are trying to use MTTY to run getdevinfo command, as a result we can see error message. That's why RUU can't check the right CID in our devices.
All known solution for Heralds don't work with our problem. We should develop or wait for being developed by someone (Olipro,pof,mestrini,...) suitable solution. There are fine solutions for bricked Wizard or Hermes so it should be the way to unlock our Heralds, too.
My idea is to count all users with bricked Heralds to see the size of the problem and to show our great developers on this forum that it is important to find a way to unbrick our Heralds. Or maybe we should establish the prize for the person who will be the first in finding the unbricking method and than donate him? I think it could motivate some of them...
So, all bricked Herald's users, please leave your post in this thread, to show the world that this is a huge problem!
My Herald is Dopod C858 (I think so, because I'm not the first owner and this is what I was told about)
IPL: 1.11.0001
SPL: 1.11.0001
Regards.
a bricked one
here is one bricked, have htc p3450 with
ipl : 1.08.0001
spl : 1.08.0001
only bootloader and RUU with error 300
hope to find solution.
mine is bricked
IPL 1.08.0001
SPL 1.08.0001
trying with every solution: forced RUU, patched RUU and their DLLs, WM5 emulator, SD-Flashing + heradiag
I was thinking in something.. Do u remember PDAVIET first version for Prophet? You cannot flash PDAVIET WM6 directly.. U have to flash a special PDAVIET WM5 to prophet first, then PDAVIET WM6. And... when u got a bricked prophet device, the solution is...? PDAVIET WM5 special rom
So, i'm on it. working hard!!
Forced RUU? I know that the Univesal has an RUU to bypasses any and all checks and just starts flashing the ROM. I wonder if this would help... I assume the IPL is still fine unless it was overwritten in your devices because it's in a different memory address in devices with an SPL lower than 4.0.0.0. We would have to create our own RUU, though.
EDIT: After some research, this will not work. If the radio was damaged but the radio bootloader was not, there might still be hope, if the radio bootloader was damaged, then it's a no go.
Ive tried with Bepe's RUU (Polaris Premium BEPE ROM) but have no luck... maybe i should try to patch IPL/SPL in RUU check
keep goin...!
UPDATE 2:
HEY
how progress on unbricking
hopefully you get it working
first sorry about my language...
at last , what the members do??? (with IPL:1.08.0001 and error 300 )???
is there any solution?????
all the members with IPL 1.08.0001 and error 300 issue are welcome
ps. need RUU Blank Device application, or a customized RUU
anyone would help?
#2 just waiting days to post a NEW, KILLER topic bcoz im just getting bored
it means we should give our ppcs to repairman to change their motherboard??????????????
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
tramuyo said:
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
Click to expand...
Click to collapse
hey men...
you can test http://s131209249.online.de/e-plus/4350main.html
it can be usful
thank you for your suggestion.. its a German ROM, i will analyze it if can be converted to a another thing..
also ive found ExtROM updater (this is new) so Ill analyze that too
thank you bro
new solution
Dear all
Good day !
Please check below link :
http://s131209249.online.de/e-plus/4350main.html
I gess you can solve this Problem to First :
install WM5 ( no mater what language you use ,only to get your PPC back to work as a workable part )
secound :
Use WM6 to start as a usuall PPC ,
Please inform us ( we are Iranian WEB master in Iran for Update & every thing that will be involved) the results & solving some of our Friends Problems in iran too ,
thanks
Your Truly
Sami
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
tighoor said:
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
Click to expand...
Click to collapse
Dear Tighoor
Hope this Email Finds you in good Health & Great Sprit !
No dear ,, this is not Hardware Problem , because You know better than me , this Problem happens while you have Problem with Core ROM ,
I'm really get fascinated to hear the Result from you ,
I'm really Hopeful that this Problem get solve by this Method ,
Please don't lessen to YAS company !
Believe me , they don't have any information about PPC , they just import & warranty
parts !
I'm Purchase manager Of matrix warranty !(www.matrixfzcuae.com)
so I know their ways ,they just import & sell ,nothing More
Please kindly do this Method & I think this Problem will solve !
thanks
Best regards
sami
Friends... I have a problem and i need any help i can get.
I have a cingular 8125 pda and it was working fine until 3 days ago.
Now it does not power up at all. What I did ? 3 days ago I had the super idea to upgrade it to WM6 .So I got an image and tried to send it to PDA After update it opened with a strange of a 'glass of beer' and it stoped there.
After 5 min with no response I pressed the reset button and that's all
It never opened again. I tried everything, but it is dead. Not even the charge lights.
If someone had an idea to help me to power it up I will be very grateful.
Thanks in advance
Well, sorry man, but you have flashed the Button(I think) ROM to a G4 device, and have bricked it. There is currently nothing that can be done to fix a bricked Wizard, but we are working on a solution.
Sad !!
Thanks for the response my friend. These happens if you have a nice working phone and you want more......
padvou said:
Thanks for the response my friend. These happens if you have a nice working phone and you want more......
Click to expand...
Click to collapse
Nopes !!!
It happens,when not reading and understanding the guide and procedure correctly.You didn't verify the DOC Chip version of your phone and the correct method to upgrade a G4 phone.
Though ! feel sry about your phone but just a bleak chance and try,have you tried to get it into Bootloader mode ? There's no harm in trying,was the battery fully charged when you started to flash,are you sure your battery is charged ? like I said,there's no harm in trying,lets check list all the points. Do you remember which is your device ? is it G3 or G4.What was the IPL/SPL of the phone,if you can remember ,post it here,ok
hi i was trying to flash my friends htc 8125 with the tutorial on this web and now i just have 3 color display or boot mode i think. im new this was my first time i flashet first with buton ... flash but not work error 302 but after i flash with alternative flash was in the tutorial and i get an error to so i dont know what to do how to repair
HTC CINGULAR 8125
IPL 1.05
SPL 1.05
I'm kinda of new too, but I believe you just have to pick the rom u want to flash up to. U r at the ideal ipl & spl. I just did that to mine about a week ago and then flashed it EXACTLY like forum said and then just update to 3.XXIPL & 3.XXSPl. After which I picked 1 of the TNT rOMs and wella! try to flash it up now
i dont know wheres to find the roms do you have a link or something
Have you CID unlocked yet?
Obviously not unlocked yet!
Cause he stucks on step 1 !
hahahaha upgrade an original rom... try the 2.26 tmobile not 3.08 please...
Hey Que
I will be getting T-Mobile any hour today...
I will be following all the instructions and try to use a Cingular card on it.
I'm trying to decide what to use for updating the rom on this 8125 the ipl reads 2.25 the spl reads 2.25. in the tutorial there isnt any mention of these that I can ascertain. the other numbers are os 2.25.11.1 gsm 02.25.11
Is this even a necessity. The unit shuts down and is very difficult to get restarted, seems to be a good unit, just looking to make it more reliable. Thanks in advance for the help.
hydafl said:
I'm trying to decide what to use for updating the rom on this 8125 the ipl reads 2.25 the spl reads 2.25. in the tutorial there isnt any mention of these that I can ascertain. the other numbers are os 2.25.11.1 gsm 02.25.11
Is this even a necessity. The unit shuts down and is very difficult to get restarted, seems to be a good unit, just looking to make it more reliable. Thanks in advance for the help.
Click to expand...
Click to collapse
Your phone is running the official cingular stock rom and has official IPL/SPL 2.25 (Bootloaders),its nothing to be worried about,now it depends if you prefer to reflash the official wm5 rom or wud like to upgrade to latest wm6.1 custom build roms.
If you want to keep official then download the official wm5 stock rom and simply flash it,but if you desire to upgrade to latest wm6.1 rom,as no official wm6 roms are provided,therefore,you'll have to flash a custom build wm6.1 rom,and for that you'll have to get your phone CID unlocked.
my phone is in boot mode i dont have the roms im new wheres can i find the rom that you say the tmobile my phone was with the original cingular rom or where can i find the original one
mmmmm ok!
I dont have the link but you an enter in wiki section for wizard... is a thread that said wizard goes wiki click there and then it tooks you to the wiki pages! there... you can found a link that takes you to the original roms... choose the one you see for cingular..... some links are broken so dont desperate maybe we can found other one... if you dont get it there you can choose the search tool just follow my steps on my signature says The XDA search culture...
Dont be afraid men you only need to use some more things to start unbricking your phone... (I hope so) many things tooks time cause we dont read enough now lets work men!!!
Well avoiding duplicatted posts this is gonna change many times
Here is my RUU without ID http://forum.xda-developers.com/showthread.php?t=429327&page=9
I didnt found the cingular but try to unzip the exe file with winrar... the nk.nbf can be cutted and pasted in the RUU folder to upgrade it without ID vendor permissions... we will on touch men!
Xplain more
Xplain more of your problem remember that unlock upgrade flashing dids most be done on XP and without SIM and MiniSD pluged... be sure your batt is full charged and your USB cable dont have troubles.
Can you privide more info abour exactly what you have done... please men we need all you got
OH remember not to use so much your phone on Bootloader screen cause we need the batt almost 70% to downgrade unlock and upgrade again it dont charge in RGB screen.
About getting official Wizard Cingular ROMs.
I called HTC and Cingular they say that HTC is not licensing the Wizard WM6 from Microsoft anymore, so they are not supplying the ROMs for the public.
No official support from Cingular/HTC on Wizard for WM6 or 5 for that matter.
I'm new to pdas I've only ever had cell phones so with that in mind its confusing as to where to start. I'm electronic savvy when it comes to car repair, however some of this is daunting at best. I'd like to take this semi-bricked wizard to the next level.
Everytime I find what I'm looking for the webpage is obsolete, what to do?
hydafl said:
I'm new to pdas I've only ever had cell phones so with that in mind its confusing as to where to start. I'm electronic savvy when it comes to car repair, however some of this is daunting at best. I'd like to take this semi-bricked wizard to the next level.
Everytime I find what I'm looking for the webpage is obsolete, what to do?
Click to expand...
Click to collapse
First,always post the DOC Chip version of the phone,what is the IPL/SPL of the phone.
Secondly,what exactly is the problem and what you want to do ?
the ipl/spl are at 2.25 and the specific problem is that wen in hibernate mode the only way to work with it is to remove the battery to restore functionality, then that resets the factory settings of time and date and also drops calls etc.
hydafl said:
the ipl/spl are at 2.25 and the specific problem is that wen in hibernate mode the only way to work with it is to remove the battery to restore functionality, then that resets the factory settings of time and date and also drops calls etc.
Click to expand...
Click to collapse
Its a G3 version,download the official stock wm5 rom from here and flash it:-
http://download.america.htc.com/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe
But,if you want to upgrade to latest wm6 then follow this link and do it correctly as the guide reads :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Good luck
Well I think its bricked no screen and no charge light, should I buy a new battery or just sell it for parts? I really tried to find the correct place to update and I goofed what can I say its my responsibility, is thereanymore I can do from this point?
hydafl said:
Well I think its bricked no screen and no charge light, should I buy a new battery or just sell it for parts? I really tried to find the correct place to update and I goofed what can I say its my responsibility, is thereanymore I can do from this point?
Click to expand...
Click to collapse
G3 devices don't get Bricked like this,by just flashing a rom,untill and unless you have flashed any G4 IPL/SPL on it,otherwise,G3 phones never get Bricked.So most probably its the battery,try to get the battery charged or get another battery from a friend and confirm it.
As an update and thank you very much. I purchased a new battery and the the store was good enough to pre charge it. We installed the above official wm5 file and its currently going throuh re updating itself. I did happen to notice that it now has an AKU2 file. Is this an update over and above what I had originally?
Once again thanks....
Are there any problems with 3G sim cards because when I installed the card the phone reacts as if there is no battery. No charge indicator or any activity.
Problem solved, it helps to have the sim card properly seated.......
Thanz!
You are most welcome,glade its working.
Yes,the above rom is AKU 2,its an upgrade to your previous official Rom,always try to keep the battery fully charged,as it creates many problems if it gets below the required retention charge of 30%.
Try out the Guide I posted above and see if you can get it CID unlocked and upgraded to latest wm6.1 rom,thats where the fun begins....!
Hi to all Masters,
I am in need to flash my elf via JTAG but am not able to find anyways after googling so finally i decides to ask for help hear.
I need JTAG pin outs image , Its s/w & process to work on its spl hope i can get this hear aa waiting for masters to help me out..........
JTAG?
Why do you need to flash in this manner?
Yes Good Question bro.....
Have got one P3450 & some one tryed to change its language & loaded P3452 rom on it & not its stuck in tri colour/ Boot mode any ways i found its DID & CID using snoopy & mtty but this DID:-ELF010050 & CID:- VODAP102 is not avaible so the ways i know to give this cell life is in 2 options
1:- Great Olipor can do this i know very welll as he has did same one for me in past but he charges very high to creat fixer for such sets....................& this time its not so affordable soooooooo
2:- I planed to give some time on this work & try with its JTAG if it can be possible.....
If any one knows ways pleas co-operate...
Thanks to all In advance how keeps affords to build thisup......
You mentioned CID locked and such?
I thought there was a free CID unlock tool in the ELF Upgrading forums.
And yes, even if you are stuck at that 3 colour boot screen, you can still plug in the usb cable and unbrick your device from there.
jeremy89632 said:
You mentioned CID locked and such?
I thought there was a free CID unlock tool in the ELF Upgrading forums.
And yes, even if you are stuck at that 3 colour boot screen, you can still plug in the usb cable and unbrick your device from there.[/QUOTE]
How ? to unbrick withought its proper rom can u pleas healp out on it ? Have added u on my yahoo if possible pleas let me know. Waiting...........
Click to expand...
Click to collapse
alright, you can reach me by email.
because my laptop is with acer service centre.
Do you have a memory card?
Yes bro i have Memory Card........... & mailing u in few seconds
& i like your sologon
" Knowledge is power, sharing is powerful "
Share as much as you can in your life, as you may not know how many lives you will impact.
Start sharing today, because you wont know how long you can share if you don't start.
Thanks for the compliments
Glad to help.
So what process ill i need to do & yeha i ill like to know your Good Name if u dont mind
Finall no s/w stuff is working to solve this issue i need JTAG can any one help me.........................................................................
Hey, how is it going?
I sent you a few links last time, so did it work out, or .. ?
Have you flashed your phones to other ROMS before?
Or you are using the default ROM.
Thanks bro for those links but its none of my use i tryed alll but no results now am sure i need its JTAG or some one who can flash my spl in boot mode.........
let me offer you a solution.
You told me that you have a memory card right?
Great.
Follow this.
http://wiki.xda-developers.com/index.php?pagename=Elf_SD_Card_Flashing
Cheers.
I always used to flash onyx rom using this method and its working great.
I think you can use this to flash spl / ipl or anything else. (with nbh files)
Drop me an email if you bump into any problems.
Finally My cell Got Life Back i did it naturally it costed me a lots of time & patients incluading actavitation of QMAT but i did it & am happy that i did it on mine........... Any ways thanks to alll who supported.
Butttttt still i ill like to have ways for JTAG if any one can provide........
So wait, did your phone worked in the end?
Yes its done man & thanks to u tooooooooooo
Great to hear that.
If you have any more issues, hit us back again