Friends... I have a problem and i need any help i can get.
I have a cingular 8125 pda and it was working fine until 3 days ago.
Now it does not power up at all. What I did ? 3 days ago I had the super idea to upgrade it to WM6 .So I got an image and tried to send it to PDA After update it opened with a strange of a 'glass of beer' and it stoped there.
After 5 min with no response I pressed the reset button and that's all
It never opened again. I tried everything, but it is dead. Not even the charge lights.
If someone had an idea to help me to power it up I will be very grateful.
Thanks in advance
Well, sorry man, but you have flashed the Button(I think) ROM to a G4 device, and have bricked it. There is currently nothing that can be done to fix a bricked Wizard, but we are working on a solution.
Sad !!
Thanks for the response my friend. These happens if you have a nice working phone and you want more......
padvou said:
Thanks for the response my friend. These happens if you have a nice working phone and you want more......
Click to expand...
Click to collapse
Nopes !!!
It happens,when not reading and understanding the guide and procedure correctly.You didn't verify the DOC Chip version of your phone and the correct method to upgrade a G4 phone.
Though ! feel sry about your phone but just a bleak chance and try,have you tried to get it into Bootloader mode ? There's no harm in trying,was the battery fully charged when you started to flash,are you sure your battery is charged ? like I said,there's no harm in trying,lets check list all the points. Do you remember which is your device ? is it G3 or G4.What was the IPL/SPL of the phone,if you can remember ,post it here,ok
Related
I just tride the romupdate DopodD800W on my MDA compact 111 T-Mobile en my little frend is dead as a rock!! no responce with activesync what so ever. It freezes at start. Please help me!!!
Put in bootloader and run the official T mOb update..it will b alive
how do I put it in bootloader?
Do a search on this forum!
I did and found it but still no connection what so ever so I can not install a new ROM.
monja72 said:
I did and found it but still no connection what so ever so I can not install a new ROM.
Click to expand...
Click to collapse
There are a lot similar messages in the forums at this site, all from people with bricked phones and waiting for a solution that is not here (yet). The easiest and quickest way to have your phone up and running again is to send it to either you provider or imei-check. But this will cost time and money. In the meantime, there are a lot of tips and tricks (not allways working though) in the various threads, you might give that a chance. What is the risk? I would say, there is not any, since your phone is allready dead and the warranty went out the window the moment you tried to flash another ROM.
I took the risk and went to the store and told them that my phone was dead after installing a program, they looked at it and just send it for repair, so far so good. hope it will come back alive. From now on no more risks!! thanks for your tips people!! Let you know when phone is back and fixed...
Hi to all Masters,
I am in need to flash my elf via JTAG but am not able to find anyways after googling so finally i decides to ask for help hear.
I need JTAG pin outs image , Its s/w & process to work on its spl hope i can get this hear aa waiting for masters to help me out..........
JTAG?
Why do you need to flash in this manner?
Yes Good Question bro.....
Have got one P3450 & some one tryed to change its language & loaded P3452 rom on it & not its stuck in tri colour/ Boot mode any ways i found its DID & CID using snoopy & mtty but this DID:-ELF010050 & CID:- VODAP102 is not avaible so the ways i know to give this cell life is in 2 options
1:- Great Olipor can do this i know very welll as he has did same one for me in past but he charges very high to creat fixer for such sets....................& this time its not so affordable soooooooo
2:- I planed to give some time on this work & try with its JTAG if it can be possible.....
If any one knows ways pleas co-operate...
Thanks to all In advance how keeps affords to build thisup......
You mentioned CID locked and such?
I thought there was a free CID unlock tool in the ELF Upgrading forums.
And yes, even if you are stuck at that 3 colour boot screen, you can still plug in the usb cable and unbrick your device from there.
jeremy89632 said:
You mentioned CID locked and such?
I thought there was a free CID unlock tool in the ELF Upgrading forums.
And yes, even if you are stuck at that 3 colour boot screen, you can still plug in the usb cable and unbrick your device from there.[/QUOTE]
How ? to unbrick withought its proper rom can u pleas healp out on it ? Have added u on my yahoo if possible pleas let me know. Waiting...........
Click to expand...
Click to collapse
alright, you can reach me by email.
because my laptop is with acer service centre.
Do you have a memory card?
Yes bro i have Memory Card........... & mailing u in few seconds
& i like your sologon
" Knowledge is power, sharing is powerful "
Share as much as you can in your life, as you may not know how many lives you will impact.
Start sharing today, because you wont know how long you can share if you don't start.
Thanks for the compliments
Glad to help.
So what process ill i need to do & yeha i ill like to know your Good Name if u dont mind
Finall no s/w stuff is working to solve this issue i need JTAG can any one help me.........................................................................
Hey, how is it going?
I sent you a few links last time, so did it work out, or .. ?
Have you flashed your phones to other ROMS before?
Or you are using the default ROM.
Thanks bro for those links but its none of my use i tryed alll but no results now am sure i need its JTAG or some one who can flash my spl in boot mode.........
let me offer you a solution.
You told me that you have a memory card right?
Great.
Follow this.
http://wiki.xda-developers.com/index.php?pagename=Elf_SD_Card_Flashing
Cheers.
I always used to flash onyx rom using this method and its working great.
I think you can use this to flash spl / ipl or anything else. (with nbh files)
Drop me an email if you bump into any problems.
Finally My cell Got Life Back i did it naturally it costed me a lots of time & patients incluading actavitation of QMAT but i did it & am happy that i did it on mine........... Any ways thanks to alll who supported.
Butttttt still i ill like to have ways for JTAG if any one can provide........
So wait, did your phone worked in the end?
Yes its done man & thanks to u tooooooooooo
Great to hear that.
If you have any more issues, hit us back again
Hi everybody!
I've recently bought an Omnia II and I have a big problem.
After a few days I've decided to flash some custom rom but after flashing it there were no charging and I get some message that my battery is not supported or not compatible or something else. I've quickly flashed an original Samsung ROM and everything was fine. Then charged the battery fully and flashed an other custom ROM and have the same result. Nice fast ROM without charge. Now I'm back on stock ROM again but I'm totaly confused. Did I missed something?
Please help!
I flashed my HTC PDAs for four years without any trouble, but it's new to me and found nothing on the net. I searched this forum and MoDaCo but nothing.
Thanks for any help!
Best regards
Gigafun
Hi, try this (worked for me on a htc device some time ago):
-- Turn device off,
--Take out batery,
--Wait 1 min,
-- re-insert battery,
-- do a hard-reset,
-- boot up device completly,
-- plug-in charger (NOT USB-PC)
-- Wait a bit,
-- Should charge, wait untill fully charged (do not mess with the phone untill it's fully charged).
-- Disconnect charger,
-- use phone.
If this doesn't help try flashing a custom rom directly from samsung but "older" then your present one.
becosemsaida
Thank you, I've tried but no luck. And neither GSM, nor GPS working.
It's charging only when the device is turned off. May I change Radio ROM?
Sorry, I was blind. I have an i8000, and the ROM I was flashed is for Verizon i920.
I thought its the same hardware but I was wrong.
Thanks for the help.
Gigafun
gigafun said:
Hi everybody!
I've recently bought an Omnia II and I have a big problem.
After a few days I've decided to flash some custom rom but after flashing it there were no charging and I get some message that my battery is not supported or not compatible or something else. I've quickly flashed an original Samsung ROM and everything was fine. Then charged the battery fully and flashed an other custom ROM and have the same result. Nice fast ROM without charge. Now I'm back on stock ROM again but I'm totaly confused. Did I missed something?
Please help!
I flashed my HTC PDAs for four years without any trouble, but it's new to me and found nothing on the net. I searched this forum and MoDaCo but nothing.
Thanks for any help!
Best regards
Gigafun
Click to expand...
Click to collapse
" I've quickly flashed an original Samsung ROM"
How do you get a ROM from Samsung. Been to their webpage and saw nothing.
Ok, wrong place to question this b ut since nobody is perfect and we all make mistakes just for you:
http://symbianize.com/showthread.php?t=199385
Sorry for the link but just helping out..........
becosemsaida
if you have a briked phone contact me! maybe i can help
this is for a briked phone !!!!
that means that the phone wont start , no lighit no nothing , just a notification in the pc when you put the cable that says ''qualcom.. etc''
i will tell you how i fix my hd2 t-mobile :
there is only 1 way that i know of and this is after weeks of searching .
you have to use a ''jtag'' box and a program ''riff''
everything that you need to know and see how is done is in youtube and you find it searching : HTC HD2 T-mobile US boot repair
this guys are in poland , and the site is www.multi-com.pl
i found them on youtube and i send my phone to them
have in mind that they sell products for fixing phones but is expensive
so i asked them if they want to help and fix
and they did a very good job
what you guys need to do is mail them and see how much is the shipment
for me it was more expensive to pay the shipment than to pay the phone repair
good luck !
if you have any other questions postem here ,
please for thous ho this is helpful leave a feedback
thank you
leave feedback
for all the people that fixed their phone please leave a feedback.
satellite000 said:
if you have a briked phone contact me! maybe i can help
Click to expand...
Click to collapse
ok i think i have bricked my phone ... it starts up but it stays on the htc screen....sometimes it loads up the rom after a few minutes but then it never passes the screen where it says "setting up the phone for first use".... how can u help????
jibbz said:
ok i think i have bricked my phone ... it starts up but it stays on the htc screen....sometimes it loads up the rom after a few minutes but then it never passes the screen where it says "setting up the phone for first use".... how can u help????
Click to expand...
Click to collapse
well your in luck , is not briked if it starts up , what you need to do is run a task 29 , then reflash your phone with a energy rom , that is what i use and is very good , good luck , let me know how it goes .
My phone stays on the htc screen and doesn't do anything else. I performed a Task 29 last night. And it did this to my htc hd 2 phone now it doesn't want to turn on I mean it does but it stays on the Stck Together screen. Should I call T-Mobile and get a new phone ? What should I do ?
QCRAZE said:
My phone stays on the htc screen and doesn't do anything else. I performed a Task 29 last night. And it did this to my htc hd 2 phone now it doesn't want to turn on I mean it does but it stays on the Stck Together screen. Should I call T-Mobile and get a new phone ? What should I do ?
Click to expand...
Click to collapse
well if your phone is in guaranty yes you can tell them that one day it just got stuck , don't mention anything about you trying to flash a rom ore that you played with it!!!! cuz they will not exchange anything.
BUT you can try this : get a Energy ROM from t-mobile hd2 rom development and flash it . if you dont know the proper steps please read posts with instructions how to properly flash it ,
after this if you did everything rite your phone should be ok .
i repeat if you phone dose turn on even if is an error ore it gets stuck , is still working and is not briked . so you can still fix it you self . if it dose not turn on no led no nothing then is briked , contact me if you have other questions
hope this helps u .
still a problem
ok i have done the task 29... i was really excited , i had this feeling it was going to work... but after the install i tryed putting a rom in ( an energy rom like u recommended) n it frizzes during the loading bar... i have tryed many time n it stops after a few loads... for example .. sometimes it goes to 24% n stops,... then i tryed again . it stoped at 56% ... n i kept on trying n it stops on various percentages what can be the problem??? plz help cuz i cant even use my phone at all
jibbz said:
ok i have done the task 29... i was really excited , i had this feeling it was going to work... but after the install i tryed putting a rom in ( an energy rom like u recommended) n it frizzes during the loading bar... i have tryed many time n it stops after a few loads... for example .. sometimes it goes to 24% n stops,... then i tryed again . it stoped at 56% ... n i kept on trying n it stops on various percentages what can be the problem??? plz help cuz i cant even use my phone at all
Click to expand...
Click to collapse
ok , look try this :
1 read this http://forum.xda-developers.com/showthread.php?t=653614
2 go to t-mobile official us site and get the latest rom . try to install it !!
by the way your phone was ok when you bouth it or it was freezing then also??
satellite000 said:
ok , look try this :
1 read this http://forum.xda-developers.com/showthread.php?t=653614
2 go to t-mobile official us site and get the latest rom . try to install it !!
by the way your phone was ok when you bouth it or it was freezing then also??
Click to expand...
Click to collapse
ok i have just tryed tht n it still freezes at different percentages...n no when i first got it i got it to flkash without anyproblem... n then an update came out for the energy rom so i decided to update after the update it worked for a few days or weeks n then it decided to keep freezing n all so i tryed a new rom n thts when it stops working now... n when i mean stop working i mean it stops the process in nthe middle or so
jibbz said:
ok i have just tryed tht n it still freezes at different percentages...n no when i first got it i got it to flkash without anyproblem... n then an update came out for the energy rom so i decided to update after the update it worked for a few days or weeks n then it decided to keep freezing n all so i tryed a new rom n thts when it stops working now... n when i mean stop working i mean it stops the process in nthe middle or so
Click to expand...
Click to collapse
well i think you have to send it back , if you have guaranty ore if not take it to a service , cuz i dont see why it sould not work after you did everything....
all i can say is just try 1 more time to install the rom from t-mobile , official !
but don't use nothing just install it , be careful , for t-mobile hd2 you need t-mobile rom from www.t-mobile.com!!!
good luck
hello, i have a tmob HD2 bricked phone. it completely wont turn on, even when charging no orange light. it would not detect by computer also.
maybe you could help me.
thanks!
Did you start restart computer?
satellite000 said:
well i think you have to send it back , if you have guaranty ore if not take it to a service , cuz i dont see why it sould not work after you did everything....
all i can say is just try 1 more time to install the rom from t-mobile , official !
but don't use nothing just install it , be careful , for t-mobile hd2 you need t-mobile rom from www.t-mobile.com!!!
good luck
Click to expand...
Click to collapse
1. Try re-starting the computer.
2. Charge your HD2 fully
3. Format an microSD card and try installing the image from SD Card
Best of luck.
kenter said:
hello, i have a tmob HD2 bricked phone. it completely wont turn on, even when charging no orange light. it would not detect by computer also.
maybe you could help me.
thanks!
Click to expand...
Click to collapse
i will tell you how i fix my hd2 t-mobile :
there is only 1 way that i know of and this is after weeks of searching .
you have to use a ''jtag'' box and a program ''riff''
everything that you need to know and see how is done is in here http://www.youtube.com/watch?v=XroEPU4qyuM&feature=related
this guys are in poland , and the site is www.multi-com.pl
i found them on youtube and i send my phone to them
have in mind that they sell products for fixing phones but is expensive
so i asked them if they want to help and fix
and they did a very good job
what you guys need to do is mail them and see how much is the shipment
for me it was more expensive to pay the shipment than to pay the phone repair
good luck !
satellite000 said:
if you have a briked phone contact me! maybe i can help
Click to expand...
Click to collapse
this is for a briked phone !!!!
that means that the phone wont start , no lighit no nothing , just a notification in the pc when you put the cable that says ''qualcom.. etc''
i will tell you how i fix my hd2 t-mobile :
there is only 1 way that i know of and this is after weeks of searching .
you have to use a ''jtag'' box and a program ''riff''
everything that you need to know and see how is done is in here http://www.youtube.com/watch?v=XroEPU4qyuM&feature=related
this guys are in poland , and the site is www.multi-com.pl
i found them on youtube and i send my phone to them
have in mind that they sell products for fixing phones but is expensive
so i asked them if they want to help and fix
and they did a very good job
what you guys need to do is mail them and see how much is the shipment
for me it was more expensive to pay the shipment than to pay the phone repair
good luck !
if you have any other questions postem here ,
please for thous ho this is helpful leave a feedback
thank you
Hello guys i just registered to post this problem i got over with.
So my problem was Xperia Z constantly restarting it self. So i flashed new firmware, stock firmware locked and relocked bootloader..
Nothing helped. I even get worst, my phone started restarting at bootloader sequence. I was like literary puling my hair of head.
I tought since i droped my phone and replaced display that actualy that drop damaged something on motherboard.. but no
I tried with puting just new batery and all problems were solved Phone didnt restarted even once, i flashed lineage firmware and is working like a charm
I hope that this will help someone ^^
Sorry if i am posting in bad forum section and sorry for bad english, have a good day ^^
crni94 said:
Hello guys i just registered to post this problem i got over with.
So my problem was Xperia Z constantly restarting it self. So i flashed new firmware, stock firmware locked and relocked bootloader..
Nothing helped. I even get worst, my phone started restarting at bootloader sequence. I was like literary puling my hair of head.
I tought since i droped my phone and replaced display that actualy that drop damaged something on motherboard.. but no
I tried with puting just new batery and all problems were solved Phone didnt restarted even once, i flashed lineage firmware and is working like a charm
I hope that this will help someone ^^
Sorry if i am posting in bad forum section and sorry for bad english, have a good day ^^
Click to expand...
Click to collapse
Kudos thanks to you...i've solve my bootloop problem as well. My first thought when it happened "it must be a bootloop" but unfortunately its not...its 100% battery issue. So to the people out there, kindly try to troubleshoot 1 by 1. cheers