my phone is o2 xda atom ,
there was a tag called device in the software taskmgr(included in attch),i found a dll called "SDHC_mainstorage...(i can't remember it exactly)",then i thought my sd was a no-sdhc card(2g transcend),i stopped it,but it seems some problem is occured,the busy cursor last for long ,and i soft reset device,then i found my device miss found the sd card.i open the taskmgr and want to restore the change,but i can not found the dll"sdhc_maiXXXX" ,seems it was replaced by a dll called"true_ffsXX(i also can't remember it exactly)",i run it and i found there was a dir called"storage" occured in "my mobile device"(use gsfinder).i'm very puzzled,and i want to restore everything with a soft reset,but this time my device can not reset successfully,it stoped in the first splash screen(in the second splash the screen will get a little dark,seems a signal that os is loaded?),this is the problem,now,the device can not boot successfully,can not hard reset(screen shows "device clean boot..."for long),however,it can boot to factory mode(use camera key+reset),also can upgrade rom successfully(i have upgrade several different rom,but prblm still exist).thats the all problems,could you give me some advise?i have try almost all methods but never can solve it....include flash with RUU,flash with sdcard(by files diskimg.nb0,eboot.img,extended.img),and flash different roms.even i use JTAG rewrite the bootloader in PXA272(from here http://wiki.xda-developers.com/index.php?pagename=DeadBoot )but still no use(error report here http://forum.xda-developers.com/showthread.php?p=2200731 ).what shall i do now?maybe the last method i can find is to flash my atom with sdcard with these files(dm.nb0 flash.img agent.mot mot.mot cpld.img assetinf.img extended.img mdoc.img)?problem is where can i find these files?i have search all the earth but no result,i don't know how to get these files,please give me some advice!very very thanks!and if you can read CHINESE you will find me here http://bbs.pdafans.com/thread-555068-1-1.html thanks to everyone replied!
wei2005yh said:
my phone is o2 xda atom ,
there was a tag called device in the software taskmgr(included in attch),i found a dll called "SDHC_mainstorage...(i can't remember it exactly)",then i thought my sd was a no-sdhc card(2g transcend),i stopped it,but it seems some problem is occured,the busy cursor last for long ,and i soft reset device,then i found my device miss found the sd card.i open the taskmgr and want to restore the change,but i can not found the dll"sdhc_maiXXXX" ,seems it was replaced by a dll called"true_ffsXX(i also can't remember it exactly)",i run it and i found there was a dir called"storage" occured in "my mobile device"(use gsfinder).i'm very puzzled,and i want to restore everything with a soft reset,but this time my device can not reset successfully,it stoped in the first splash screen(in the second splash the screen will get a little dark,seems a signal that os is loaded?),this is the problem,now,the device can not boot successfully,can not hard reset(screen shows "device clean boot..."for long),however,it can boot to factory mode(use camera key+reset),also can upgrade rom successfully(i have upgrade several different rom,but prblm still exist).thats the all problems,could you give me some advise?i have try almost all methods but never can solve it....include flash with RUU,flash with sdcard(by files diskimg.nb0,eboot.img,extended.img),and flash different roms.even i use JTAG rewrite the bootloader in PXA272(from here http://wiki.xda-developers.com/index.php?pagename=DeadBoot )but still no use(error report here http://forum.xda-developers.com/showthread.php?p=2200731 ).what shall i do now?maybe the last method i can find is to flash my atom with sdcard with these files(dm.nb0 flash.img agent.mot mot.mot cpld.img assetinf.img extended.img mdoc.img)?problem is where can i find these files?i have search all the earth but no result,i don't know how to get these files,please give me some advice!very very thanks!and if you can read CHINESE you will find me here http://bbs.pdafans.com/thread-555068-1-1.html thanks to everyone replied!
Click to expand...
Click to collapse
sorry i can't upload the file ,you can download here http://www.dotfred.net/TaskMgr.htm
Related
(mods i would appreciate if you could make this a sticky for people... ive worked long and hard trying to get this thing working again)
Ok so heres what happened to my XDA which proberly happened to yours.
I went onto the 02 site and got the latest radio stack upgrade for my xda, but i didnt have the sim in my device so once it finshed and restarted the xda it crashed because there was no sim in it. So i hard reset it.
Causing it to hang on the boot screen showing the G & U letters on the side for about 4 minutes before booting to a blank screen with the keyboard icon in the corner.
*** Please remember at the moment my status LED isnt working showing there is no battery (but still booting etc - P.S i have installed a new battery - no diffrence) ***
Heres how to get it working...... remember that everything takes longer because the XDA lags like mad.
Ive created this guide myself ive took nothing from anyone else info ive done this from scratch, it will need to be done everytime the machine runs out of power (hard resets).
---------------------------------------------------------------------------------
* when i put " + " it means AT THE SAME TIME e.g button1 + button2 = keep pressing them at the same time.
** I refer to the directional keypad centre button as the "OK" button.
Make sure you have the correct RSU Version from here :>
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Download it and put the files onto an SD card.
1. Boot up the device
2. keep pressing the OK button + volume button until it shows the today screen, please note there will be no titles on the screens, HENCE NO START BUTTON.
3. Then press the contacts button + THEN OK a few times, then press the OK button this should bring up the start menu
4. CLICK programs, file explorer, select the SD Card. Then Copy RSUPGRAD.exe to : my device > windows>start up.
5. Copy the remaining 3 files to the : my device > windows
6. Soft Reset Device
7. Click on start (on the upgrade util) it will then restart the device because theres no LED for the battery (hence the 1% then fail).
8. Once started it should then start up as it did when it came out the box giving you the windows setup screen.
9. Go into file explorer and delete tha flas util file from the startup.
Thats it!
- Remember if you hard re-set the device again it will need to be re-done, i dont know how to solve this problem LONG TERM, im giving my XDA to 02 to fix it...... been as its there screw up.
----------------------------------------------------------------------
Thanks Everyone
James
Does this actually flash the gsm radio? If it does then why does it need reflashing following a hard reset?
No it doesnt re-flash it.............
All i know is that it fixes it and many people have had the same problem but had no replys so id thought id help them out :roll:
Where are he diffreneces to the instrucions on wiki????
Stefan
huh? so your saying someone has already written the instructions?
Do you have a link? it will be intresting to find out how i can get my LED working again so the system will be able to work once more.
EDIT: IF THE BATTERY LED/STATUS IS UNKOWN (as in my case)
"Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery. "
Does not apply to you............... hence why my guide overcomes the one on wiki.
If you have had the situation happen to you, then you would undertsand.
would it be possible to use the xda developers 1.2 special edition ROM instead of the 1.1 version for this procedure?thats the only rom i seem to have found.
Boogie, I think you need only the radio stack not the rom if I read the post correctly. The special edition rom contains NO RADIO STACK.
That´s not 100% correct. I´ve noticed, that some ROMs wouldn´t boot up so that you can follow the procedure.....
Stefan
hey guys this is my 1st post to this forum, but for the last year or so I've found it very helpful.
I was experiencing this same issue it would just boot up and hang on the welcome screen for what seemed like an eternity. I gave up and just left it booting up and finally the today screen came up. This is what I tried and it worked. All of this was after a hard reset when I tried to upgrade the radio stack and it fell into this infinite loop of 1% and fail and reboot. I had read a couple of the procedures for doing a radio stack upgrade but here is some of what I did.
In one of the procedures it says to copy the files to ur ppc windows directory and to copy the exe file to ur windows startup directory. I figured I would bypass that in some way. After I finally got to the today screen and used my pc to copy the files to the sd card, I copied all the files to the windows directory on the device and ran the exe file from the windows directory. It worked like a charm and my ppc was back to life. It no longer took for ever to get passed the welcome screen. I hope this helps some of you that have this issue
I have just Up the Rom "XDA_IIi_Upgrade_v1.11.162_Radio_1.04" and now my O2 have a big problem.When i finish Up Rom,I HR and O2 start install the application,and when install the Cab_java_tao...,it said that "The file "rofs_target.zip" was not copied successfully.To reinstall,you will need to get the source.cab file again."Then it stop install and i must SR,so many application can't be install.And i tried to Up many diiffirent Rom,but i still error.My friend in Vietnam give me a Rom which have been Cook,he delete the Cab_java_tao...,so the error "The file "rofs_target.zip" was not copied successfully.To reinstall,you will need to get the source.cab file again." does not appear.But I can't Up any newest Rom with Cab_java_tao...Any one can help me
You've tried unlocking the extended ROM using the tools on this site haven't you. They don't wirk unfortunately, all they do is lock the storage so you can't write to it and unfortunately hard resets don't work. I know, I did it when I knew nothing about these devices as well. Have a look at this tool by Gorosz:
http://forum.xda-developers.com/viewtopic.php?p=147439
Also if you are not in the UK, this ROM may be better for you:
ftp://xda:[email protected]_Ext-1.11.162_Radio-1.04_O2stuffstripped.rar
Good luck,
Pug.
Thx Pug,i can fix my O2 error.I uesd exttools_modified_alpine to unlock the Stogare and delete all files in Storage.After that,i Up Rom again and everything is good.
Anyone have the same error with me can do that:
1.Open the registry->HKEY_LOCAL_MACHINE->System->StogareManager->Profiles>TRUEFFS_DOC->
rename "Stogare" to another name(e.x: "hello")
2.SR->used exttools_modified_alpine to unlock Extrom Rom
3.Go to the folder using File Explorer to delete all files in folder that you rename (e.x: "hello")
4.Rename that folder (hello) to Storage again and SR
5.Up Rom again and everything will good.
Thx for a friend in VN help me fix this problem and thx for Pug much.
Hi Pug,
I need your help buddy. I bought Alpine (PDA2) and it was so cool. Now I have a problem that its touchpad is not working anymore. PDA is working fine but no more touchpad. I didnt drop it at all. Let me tell you what happened.
I used permanent save function to save my contact list. It saved the contacts and then it happened. After some time a window showed up "Contact syncronizing" and after that touchpad didnt work.
I have replaced different ROMs since then, every update has completed successfully but touchpad is not working. Can you guide me what to do ? I am sure somehow touchpad has become disabled (not hardware problem) is there any pc utility which can link with it ??? Pls help
Qbukhari.
Can you align the screen at all after a hard reset or rom update? If not it's a hardware problem and the touchpad needs replacing. Possibly the connector from the screen to the m/board has come loose, unlikely though.
The only problem I have found that survived a hard reset was a locked storage.
But may i have attention plz
i have an alpine (O2 xdaIIi)
i never delt such a case i had today, it was just a user code in that set, i hard reset that set but the password was still there, i was surprized. why code is still there after hard reset.
i quickly flashed my set with this rom Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped
but my amazment was more gaged after doing flash that user code is still there...........
how it can be possible ???
now i wanna know is, if the rom is erased and ihave flasehd a new rom then why password is still there
and phone is still giving owner info
pleaes seniors i need answer on this strange issue
My Prophet Stuck at bootscreen , with displayed
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 1.0.13.21
It happened after I tried to downgrade it.
PLEASE, tell me how to recover it ?
I had wizard before, and have some experience with backup/downgrade/upgrade/IMEI Change. Also I have backup of the phone, made by aWizard.
But this time i missed line that downgrade is NOT for G4 (2.xx.0001) ROMs. Is it possible to downgrade G4 (2.xx.0001) ROM ? Or is it possible to use iWizard w/o downgrading ?
Problem solved ! Please, stick this post up - I saw A LOT of people in this forum to ask how to resolve situation with "STUCK ON START-UP SCREEN" ... no one full answer. So ... solution :
1 step. Download one working for YOUR G3 or G4 version ROM. You can easly recognize the difference
G4 ROM on startup screen looks like
IPL 2.10.0001
SPL 2.13.0001
Look at last digit - if it's like 0001 - its G4 ROM. If it ends like 2.00.000, or just 2.00 - then its G3 hardware version.
So G4 (2.XX.0001) users can use any G4 ROM like this one ( tested by me ) -> ftp://xda:[email protected]/JAMin_WWE_213923_2139123_022021_ship.zip
G3 (2.XX) users can use this ROM -> ftp://xda:[email protected]_AKU23_023021_P12MB_PDAMobiz_v2307.exe This ROM is not tested by me, but I have read a lot of good responses about it.
2 step. First prepare the phone - full charge battery. After that, hold CAM + COMM buttons ( on the left side of the phone ) and reset it. You will be bringed to so sadly famous "three colors screen". Now connect your phone through USB and start Updating program that you have downloaded before. Sit back for about 15 minutes ( dont get nervous when it stucks on 80% ... it had to pass it after time). If everything goes smooth - after reset you must to have working phone again.
2A step. If you get error message ( like I did first time )
ERROR [294] : INVALID VENDER ID
You have to make few steps, a little more complicated then pressing NEXT buton couple of times.
First, download this cracked version of ROM Update Utility program. Can be found here -> ftp://[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip , then
1. Download and install WinRAR ( http://www.rarlabs.com/ )
2. Click with right button on program that updates ROM ( like RUU_Prophet_G3_2151327_AKU23_023021_P12MB_PDAMobiz_v2307.exe ) and choose Extract to...
3. Replace in directory you just extract archive file ROMUpdateUtility.exe with the same file from the archive you have downloaded early (ftp://[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip )
4. Now, run ROMUpdateUtility and this time there will be no WRONG VENDER ID error.
Good Luck
When I want to download the Zip file
Can be found here -> ftp://[email protected]/Pro...NoVendorID.zip
a pasword is required for the ftp. wher can i get this?
wimdieleman said:
When I want to download the Zip file
Can be found here -> ftp://[email protected]/Pro...NoVendorID.zip
a pasword is required for the ftp. wher can i get this?
Click to expand...
Click to collapse
Password is xda
Ok - so I downloaded:
ftp://[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip
I extracted this to my "c:\orange" drive. This means I have a file called: "C:\orange\ROMUpdateUtility.exe"
I also have a file called "C:\orange\JAMin_WWE_213923_2139123_022021_shi.exe" I extracted this and I have a file now called: "C:\orange\JAMin_WWE_213923_2139123_022021_shi\RUU_TOOLS\Prophet\WWE\ROMUpdateUtility.exe"
I replaced the 1st file over the 2nd. I ran the file "C:\orange\JAMin_WWE_213923_2139123_022021_shi\RUU_TOOLS\Prophet\WWE\ROMUpdateUtility.exe" after I replaced it and I get the following message: "ERROR [240] : FILE OPEN" and a message about not finding the file.
Please help!
[SOLVED]
I had to put the nk.nbf folder in the right place - as I didn't know 100% where, I just put it in ever folder and subfolder of the orange folder! I am on 95% now.... fingers crossed!
It is now stuck on 95% and gives a 326 error. ANy help?
thnx
got the same problem
solved thnx to you great
rockgeek said:
Ok - so I downloaded:
ftp://[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip
Hi
Clicked on the above link and its not there,has it been removed ?
Rgds
Clicon
Click to expand...
Click to collapse
Stuck @ Qtek Splash Screen "Help"
I have this issue before and the solution page under PDAMobiz has been taken down. The original page for resolving this issue was linked under this http://forum.xda-developers.com/showthread.php?t=273723 which refers to http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=440&PN=1 since then this page has changed / not working anymore.
I am currently stuck at he Qtek Splash screen that display the OS, GSM etc. pressing the camera, record button and softreset w/ the stylus does not get me to the bootloader page 3 colors.
I have all the original software that this page originally linked downloaded but need the steps to restoring the phone to a working active sync usb condition or bootloader screen for rom reload can any one please assist in providing a solution.
rockgeek said:
Ok - so I downloaded:
ftp://[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip
I extracted this to my "c:\orange" drive. This means I have a file called: "C:\orange\ROMUpdateUtility.exe"
I also have a file called "C:\orange\JAMin_WWE_213923_2139123_022021_shi.exe" I extracted this and I have a file now called: "C:\orange\JAMin_WWE_213923_2139123_022021_shi\RUU_TOOLS\Prophet\WWE\ROMUpdateUtility.exe"
I replaced the 1st file over the 2nd. I ran the file "C:\orange\JAMin_WWE_213923_2139123_022021_shi\RUU_TOOLS\Prophet\WWE\ROMUpdateUtility.exe" after I replaced it and I get the following message: "ERROR [240] : FILE OPEN" and a message about not finding the file.
Please help!
[SOLVED]
I had to put the nk.nbf folder in the right place - as I didn't know 100% where, I just put it in ever folder and subfolder of the orange folder! I am on 95% now.... fingers crossed!
It is now stuck on 95% and gives a 326 error. ANy help?
Click to expand...
Click to collapse
Help, very new to this and followed these steps and bingo also stuck on with the 326 error! Has it been solved?
Guess that's a no, then?
same problem here , stuck in 95%
please help me!! my problem is some ERROR 302 and dont let pass from 98% im newbe and need help tnx
dpast said:
I have this issue before and the solution page under PDAMobiz has been taken down. The original page for resolving this issue was linked under this http://forum.xda-developers.com/showthread.php?t=273723 which refers to http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=440&PN=1 since then this page has changed / not working anymore.
I am currently stuck at he Qtek Splash screen that display the OS, GSM etc. pressing the camera, record button and softreset w/ the stylus does not get me to the bootloader page 3 colors.
I have all the original software that this page originally linked downloaded but need the steps to restoring the phone to a working active sync usb condition or bootloader screen for rom reload can any one please assist in providing a solution.
Click to expand...
Click to collapse
same problem here..
does anyone has a solution for this one???
links are all dead can some one help ?
read from here http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
and here http://forum.xda-developers.com/showthread.php?t=353547
read carefully ok...
hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?
shadows of yesterday said:
hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?
Click to expand...
Click to collapse
can't help you or tell you the reason because you are not giving enough details about what you are trying to install, what is going wrong. How are you trying to install. Exe or .cab files. are you just getting error's during the installation
i tried to install .cab & .exe , but it says install unsuccessful, for example SPB & Battery status
mmmm
On what ?... is the cab on the phone or on the PC ???????
i tried both , but i couldnt
You have the HTC Touch Elf right? No cabs at all are instaling on your phone.
Possibiliites:
1. The cab files are being currupted either while you are downloading them or while you are sending them to your phone. FYI Cab files are to be installed via your phone not PC. Transfer the complete cab to phone and just click it to install - Do Not Unzip it. (A cab file looks like it is a zip file or a rar file wen it is on your PC but don't be fooled. it is a cab and does not need to be unzipped) you will only see a bunch of messy files and will just get confuzed. just place the cab on your phone and tap it with your stylus to initiate install
Exe's are to be installed via your PC to your phone through activsinc. place the exe on your desktop (Or wherever) and connect your phone to your PC using Activsinc. Then click the exe on your desktop and follow installation instructions - NOte you will have to still do some clicking on your phone to allow the installation.
2. you are not installing them properly and therfore follow instructions above.
3. your phone is currupt somehow (I don't see how) Try a hard reset and see if the programs will install after that. if not, you might want to return your phone for warranty (I am assuming you just got this phone and this is the first time you are trying to install something.
4. Maybe you have run out of room on your device to install any more applications (if you have been installing tons of other stuff successfully)
I have never gotten any errors installing cabs or exe's exept for when I was trying to install something that my phone did not support. (Not a valid WM application) or something like that.
Edit: You still are not give us much information - What type of error are you getting - What does your phone show/tell you?
Does it start to install and fail half way through? does it not start at all? does it install and the programs just do not run?
Tell us what program you are trying to install - what error you are getting and when you are getting it. Tell us the method you have used to install it etc....
If you want help you will have to provide us with as much information and detail as you can. Otherwise - Good Luck.
I will check back here regularly to see your response and try to help, but if you don't give us much more detail - no one will be able to help you.
Did you flashed your ROM recently?
it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)
shadows of yesterday said:
it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)
Click to expand...
Click to collapse
I don't know about battery status or wm router but TCPMP is an exe type installation. if you try to install this using your phone by putting the TCPMP installation on your phone and clicking to install, it won't work. You have to put the installation file on your computer, connect your device to your computer through activesinc. then click the TCPMP Installation on your desktop and follow instructions. Make sure you accept installation on your device when your device asks. The others may be the same
i did like that , but nothing changed , same message , install unsuccessful
shadows of yesterday said:
i did like that , but nothing changed , same message , install unsuccessful
Click to expand...
Click to collapse
Are you trying to install to your storage card or to device? Are you certain that you have enough storage space left?
Do you have any problems with Activsinc?
Have you tried downloading another copy of TCPMP - Maybe the copy you have is no good.
yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???
DuelMasterNG said:
Did you flashed your ROM recently?
Click to expand...
Click to collapse
You never answered the above question.
shadows of yesterday said:
yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???
Click to expand...
Click to collapse
I don't know if I can help you with this problem. I have never had any problems installing anything onto my device even when the app wasn't compatible. usually still installed, just wouldn't run. I am still using official stock WM 6.0 rom that came on my device. (have not ever flashed a new ROM or Radio and don't know anything about that. If you did flash a new ROM or radio, that could be what is causing your problems and you may want to examine in the thread where you got your ROM or Radio from for answers or to see if anyone else is having the same difficulties. Perhaps PM the person who cooked the ROM. If you havn't flashed any new ROM or Radio, then maybe you changed something in your registry that you shouldn't have with a registry editor (just a thought - don't know if you have ever done this) or maybe you have an app on your phone that is causing conflict when trying to install other apps. You can always try a hard reset of your device (if you don't mind starting from scratch again customizing your device) and then try installing TCPMP and see if it works right after a hard reset. That would suggest either something was changed in your registry or that another app was causing conflict. Bit of a pain in the a## having to reinstall everything(unless you don't have much installed on your device) and still no guarantee that it will work. Before doing a hard reset, you might want to look into backing up your device. (I don't know anyting about backing up - what program to use or how much it can back up such as setting or such but you might want to check it out. Also make sure you sincronize your device with your computer prior to hard reset so that all your contacts, appointments etc... are up to date that way after a hard reset you can just syncronize your device again and get your contacts and appointments etc... back.
If anyone else has any suggestions here -- Please feel free to jump in. I know that I would be really annoyed not being able to install new apps to my device.
Good luck. I hope this gets figured out for you
Rod
i had the same problem, it was unbelievably frustrating, i had to restore my X1i to factory settings, that fixed the problem.
I think you should follow hotrod101's suggestion and do a hard reset. Its quite likely that your phone has malfunctioned or something. It's probably going to save you a lot of work in the long run. Or turn in your device in one of the HTC service centers as already stated. Don't forget to back all your stuff up first.
Good Luck.
thanx alot
you did not say whether your rom is original or coked as i met some problems with cocked roms in installing arabic based applications that was easily installed before flashing me device
Did you get things figured out - If so please share with the rest what you did to solve your problem, in case others are having similar problems. Did one of our suggestions help or did you find another solution?
same problem on my Touch Pro, seams to be common ... some say that it is due to the fixed number (50 installed programs) on the touch flue ... however, I have no more information of how did they got this result, or what is the registry of this issue???
I hope if someone help on this to avoide us the headache cused by hard reset, just thinking about it make me crazy.
even hard reset is not a solution.
Hi everybody , I have i-mate JASJAM with WM5 soon i'v upgraded to windows mobile diamond ,however I want to return to the old windows I mean the original one but I dont know how to do this , any help please??
Press Start -> Settings -> System -> Clear Storage, press enter to launch, you will be prompted to type "1234" and to press Enter. If you do this you will lose all contents and the Dash will be restored to its original configuration. It takes about 5 minutes for it do this and reboot.
hold down the two soft keys and power the device on. Or you can also hold both soft buttons while pushing the stylus into the reset hole.
Not if mamadoharoona has updated the rom... Doing what DhaMajoR said will reset the Hermes to default BUT it uses the OS installed as the default. So, if you have flashed a new OS on your device you need to flash the WM05 stock rom to get that back, and good luck finding it...
Cheers...
Thank you DhaMajor , Ultramag69 is right the OS system does'nt change after applying your steps ,thats make me want to ask ULTRAMAG69 how can i flash the WM05 rom? I tried the same steps i have done with WM black diamond ,and the os still the same.
If you have any advice please tell me
Thank you for your interest
You need to find the WM05 flash file, good luck with that as they are as hard to find as hen's teeth if you didn't keep a copy of your original WM05 rom.
Make sure you have Hard SPL V7 on your Hermes and then flash the new rom. I use the sd card method as it seems safer to me, my opinion, and is REALLY easy.
1. Format 2Gb or less sd card FAT32. Copy .nbh file of new rom to it and rename to hermimg.nbh .
2. Put sd card into Hermes and reset Hermes into bootloader.
3. If 1st two steps done right, follow the prompts. If not, just reset to get out of bootloader, fix up what needs fixing and try again.
Cheers...
Thank you
Thank you very much