Database Users

T-Mobile Wing Flashing

Hello everyone. I'm new to the website and I'm very interested in flashing my T-Mobile Wing. I just have a quick question for you guys. Is there anyway to go back to factory default, pretty much put in back to its original out of the box state if i flash the phone? Also, will i still be able to use the My Faves or does that have nothing to do with this? Thanks for all the help and i look forward to learning more about this.
Gigabit

Yes. You can download a T-Mobile Wing OEM RUU (search the forums for it) to get back to normal.
My Faves doesn't need the MyFaves app. I used MyFaves for about a year on my non-MyFaves Moto PEBL before getting the Wing. I just use Touch-IT 4.4 with the HTCHome plugin and just assign my myfaves numbers to the first 5 slots so 'simulate' the ease. I've always thought the MyFaves app was rather buggy, but there's a CAB floating around that you can install if you still want it. I just change my contacts via mytmobile online.
It's not too hard as long as you follow all the directions. Read them twice through if you have to.

thanks for the quick response. I just have one other question at this point. i've been look all over the place and cant seem to find what the newest version of Touch-It is. Can you please post a link to the newest version when every you have some time. I can't wait to get started.
Thanks!
Gig

These are the newest versions of Touch-IT.
NEW - Touch-IT v6.1.3 - Clean (updated with UC)
Touch-IT wm6.1 19199.1.0.0 - Full
Touch-IT wm6.1 19199.1.0.0 - ITsBlack
Touch-IT v4.4 and 4.41 WWE P4350
There was a small problem with the wm6.1 versions where the MMS wasn't working correctly, and I'm not sure if that has been fixed... but ITJE's roms are awesome and you can't go wrong with them.
You'll need to install my keyboard fix
KEYBOARD FIX for WING / HERALD & ROM hardware keyboard (keybddr.dll) mismatch

First off, Thank you so much for the fast responsces. Second, after a nice LONG day at the hospital with my daughter i sat down to start the flashing process. As i started reading some of the directions i saw something mentioned about Hard-SPL. My question to you guys is this: once i download the Touch version that i want, is that all i need? or do i need to look more into this and find Hard-SPL. please let me know whenever you have some time.
Thank You,
Gig

All you need to do is follow this link
http://forum.xda-developers.com/showthread.php?t=358225
HARDSPL is basically just flashing a rom.. so once youre done with it, all you have to do is install the Rom you want.

ok so, when i run Hard-SPL it starts to do its thing but stops at 4% and comes up with Update Error "Error 270". I've tried re-downloading the Hard-SPL file and uninstalled/reinstalled ActiveSync. I also installed all the .cab files in this order: canonyang, disablesecurity, asergpolicy, followed by a softrest. any ideas what the problem might be. Please let me know when you have some time. Thanks for all the help guys.
Gig

Try restoring back to the default ROM that comes from the factory by downloading it from the first post here:
http://forum.xda-developers.com/showthread.php?t=321717
After that then try flashing with hard-spl and then to the new TouchIt.
By the way I recommend
Touch-IT wm6.1 19199.1.0.0 - Full
I have a T-mobile wing and that one works best for me. (of course you will have to run the keyboard fix cab and x-box cab as indicated in the previous posts after installing Touch-IT wm6)

i have yet to flash any ROM to the wing. it is still factory default. Should i still try to reinstall the new ROM using the link you provided? Thanks for all your help.
edit: after backing up all my crap i reinstalled the ROM using the RUU from the above post and everything went OK but I'm still getting the same Error when i try to run the Hard-SPL while in the bootloader screen i get "Error 270" at about the 2% mark. if i try to run the Hard-SPL while not in the bootloader screen i get "Error 202". please let me know if you have any other advice to get past this small issue.
Thanks,
Gig

gigabit3 said:
i have yet to flash any ROM to the wing. it is still factory default. Should i still try to reinstall the new ROM using the link you provided? Thanks for all your help.
edit: after backing up all my crap i reinstalled the ROM using the RUU from the above post and everything went OK but I'm still getting the same Error when i try to run the Hard-SPL while in the bootloader screen i get "Error 270" at about the 2% mark. if i try to run the Hard-SPL while not in the bootloader screen i get "Error 202". please let me know if you have any other advice to get past this small issue.
Thanks,
Gig
Click to expand...
Click to collapse
Are you sure you ran the 3 cab files first (inside of the Wing with your stylus) and then did the softreset on your Wing (by pressing the little button on the side of your wing with the tip of your stylus) prior to running the ROM exe file (on your large desktop PC)?
The 3 cabs should be run in the order that is given.

yes, after i installed the 3 .cab files i did a soft reset. I held the camera button and pushed in the reset button with the stylus. then once i was in the screen with the different colors i ran Hard-SPL from my desktop computer.
edit:
after reading what i was typing i tried it again and it worked. just call me stupid. SOFT REST! those two words will hunt me forever. Thanks for all your help. not its time to start blowing crap up. lol
Thanks a bunch
Gig

If I remember the instructions, you're supposed to run the hardspl when the phone is running WM.... so basically, install the 3 cabs, reset, wait for it to reach your today screen... connect to activesync, then run hardspl.

that is correct sir. Thats how i was reading it but then doing it a different way. i dunno what i was thinking. Thank you so much for all your help. i have successfully installed Hard-SPL and Touch 4.4 full. I also over clocked from 201 to 247 with no issues. Applied your keyboard fix and the mms fix along with the Internet fix. all is working perfect. thanks again for all the help. i'll definitely will be browsing the sit more to see what else i can learn.
Thanks,
Gig

phone freezes after i install htc home customizer

Phone freezes after i instal htc home customizer and hhc..
i upgraded to win 6.1 through verizon..
is there a new version for win mobile 6.1?

if ur radio is upgraded to 3.4XX then go with DCD. do a hard reset and get the new version....like 3.26 or whatever. you may not get all the fancy verizon crap but in the end it slows ur XV down. besides i got Navigon Mobile Navigator running on mine with 7 sec startup. forget all that VZW Navi ****. Oh and thats with no adapter "preload" program either.

i got radio 3.37.75
and rom 3.57.605.1

There is a problem with the previous version of HTC Home Cust.. and 6.1. All you need to do is install HHC Home Customizer first and run it. it will unpack the stuff and then start and say something like it assumes you have the right version and you hit ok and then it will ask if you want to update to the newest version. Hit yes and you will download and install the new version and it will work fine from there. Just install the actual customizer and only it and run it to update. It should work after that just fine. I had to figure this out on my own it was a huge pain. Hope it helps. Any questions just ask.

i went to pocket emu..but which htc do i download the hermes?

Cant install most of the softwares !!!!!!!!!!

hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?

shadows of yesterday said:
hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?
Click to expand...
Click to collapse
can't help you or tell you the reason because you are not giving enough details about what you are trying to install, what is going wrong. How are you trying to install. Exe or .cab files. are you just getting error's during the installation

i tried to install .cab & .exe , but it says install unsuccessful, for example SPB & Battery status

mmmm
On what ?... is the cab on the phone or on the PC ???????

i tried both , but i couldnt

You have the HTC Touch Elf right? No cabs at all are instaling on your phone.
Possibiliites:
1. The cab files are being currupted either while you are downloading them or while you are sending them to your phone. FYI Cab files are to be installed via your phone not PC. Transfer the complete cab to phone and just click it to install - Do Not Unzip it. (A cab file looks like it is a zip file or a rar file wen it is on your PC but don't be fooled. it is a cab and does not need to be unzipped) you will only see a bunch of messy files and will just get confuzed. just place the cab on your phone and tap it with your stylus to initiate install
Exe's are to be installed via your PC to your phone through activsinc. place the exe on your desktop (Or wherever) and connect your phone to your PC using Activsinc. Then click the exe on your desktop and follow installation instructions - NOte you will have to still do some clicking on your phone to allow the installation.
2. you are not installing them properly and therfore follow instructions above.
3. your phone is currupt somehow (I don't see how) Try a hard reset and see if the programs will install after that. if not, you might want to return your phone for warranty (I am assuming you just got this phone and this is the first time you are trying to install something.
4. Maybe you have run out of room on your device to install any more applications (if you have been installing tons of other stuff successfully)
I have never gotten any errors installing cabs or exe's exept for when I was trying to install something that my phone did not support. (Not a valid WM application) or something like that.
Edit: You still are not give us much information - What type of error are you getting - What does your phone show/tell you?
Does it start to install and fail half way through? does it not start at all? does it install and the programs just do not run?
Tell us what program you are trying to install - what error you are getting and when you are getting it. Tell us the method you have used to install it etc....
If you want help you will have to provide us with as much information and detail as you can. Otherwise - Good Luck.
I will check back here regularly to see your response and try to help, but if you don't give us much more detail - no one will be able to help you.

Did you flashed your ROM recently?

it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)

shadows of yesterday said:
it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)
Click to expand...
Click to collapse
I don't know about battery status or wm router but TCPMP is an exe type installation. if you try to install this using your phone by putting the TCPMP installation on your phone and clicking to install, it won't work. You have to put the installation file on your computer, connect your device to your computer through activesinc. then click the TCPMP Installation on your desktop and follow instructions. Make sure you accept installation on your device when your device asks. The others may be the same

i did like that , but nothing changed , same message , install unsuccessful

shadows of yesterday said:
i did like that , but nothing changed , same message , install unsuccessful
Click to expand...
Click to collapse
Are you trying to install to your storage card or to device? Are you certain that you have enough storage space left?
Do you have any problems with Activsinc?
Have you tried downloading another copy of TCPMP - Maybe the copy you have is no good.

yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???

DuelMasterNG said:
Did you flashed your ROM recently?
Click to expand...
Click to collapse
You never answered the above question.
shadows of yesterday said:
yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???
Click to expand...
Click to collapse
I don't know if I can help you with this problem. I have never had any problems installing anything onto my device even when the app wasn't compatible. usually still installed, just wouldn't run. I am still using official stock WM 6.0 rom that came on my device. (have not ever flashed a new ROM or Radio and don't know anything about that. If you did flash a new ROM or radio, that could be what is causing your problems and you may want to examine in the thread where you got your ROM or Radio from for answers or to see if anyone else is having the same difficulties. Perhaps PM the person who cooked the ROM. If you havn't flashed any new ROM or Radio, then maybe you changed something in your registry that you shouldn't have with a registry editor (just a thought - don't know if you have ever done this) or maybe you have an app on your phone that is causing conflict when trying to install other apps. You can always try a hard reset of your device (if you don't mind starting from scratch again customizing your device) and then try installing TCPMP and see if it works right after a hard reset. That would suggest either something was changed in your registry or that another app was causing conflict. Bit of a pain in the a## having to reinstall everything(unless you don't have much installed on your device) and still no guarantee that it will work. Before doing a hard reset, you might want to look into backing up your device. (I don't know anyting about backing up - what program to use or how much it can back up such as setting or such but you might want to check it out. Also make sure you sincronize your device with your computer prior to hard reset so that all your contacts, appointments etc... are up to date that way after a hard reset you can just syncronize your device again and get your contacts and appointments etc... back.
If anyone else has any suggestions here -- Please feel free to jump in. I know that I would be really annoyed not being able to install new apps to my device.
Good luck. I hope this gets figured out for you
Rod

i had the same problem, it was unbelievably frustrating, i had to restore my X1i to factory settings, that fixed the problem.

I think you should follow hotrod101's suggestion and do a hard reset. Its quite likely that your phone has malfunctioned or something. It's probably going to save you a lot of work in the long run. Or turn in your device in one of the HTC service centers as already stated. Don't forget to back all your stuff up first.
Good Luck.

thanx alot

you did not say whether your rom is original or coked as i met some problems with cocked roms in installing arabic based applications that was easily installed before flashing me device

Did you get things figured out - If so please share with the rest what you did to solve your problem, in case others are having similar problems. Did one of our suggestions help or did you find another solution?

same problem on my Touch Pro, seams to be common ... some say that it is due to the fixed number (50 installed programs) on the touch flue ... however, I have no more information of how did they got this result, or what is the registry of this issue???
I hope if someone help on this to avoide us the headache cused by hard reset, just thinking about it make me crazy.
even hard reset is not a solution.

iPAQ 91x new ROM plans

Hi all,
Sorry I've been away on a kind of post-graduation hiatus. I have a few remaining commitments this summer that will keep me busy, but I intend to update my released ROMs as follows:
1. Use latest OEM updates from HP's May 2009 official update.
2. WM6.1: update a few apps, remove a few, and switch .NET CF back to 2.0
3. WM6.5: update SYS to build 21725.
4. Scale back "motherload" packages to a standard release setup, "BR ROM"
I can't promise delivery times on this stuff, but if anybody has additional suggestions for the ROMs or new info, I'm happy to hear from them.
Thanks,
-Ben

thank you !!! waiting for your new rom !!!!

I am glad to see your post here.
I am looking forward to meeting new ROM.

hey welcome back, i wonder why you would switch .net cf to 2.0? any issue with .net cf 3.5?

Hi bro nice to see you back again. now our 9x series will rock actually bro its great if you use latest HP update with you own stuff. so basically u have to make something fast and stable. by including useful apps. like
task manager with corner icon on today for closing apps easily. and some other major stuff which is important. you can see some Roms stuff of HTC WIZARD or any other and then compare it with ur Roms. and u can make fully loaded roms as well as light versions as well. as u know ur the best cooker. so wish u good luck.
just try to fix some minor bugs in HP Roms for 9x..
Take care..
Regards

T_T what a touching moment~ god Ben is finally back to us^^
i just got wm reminder today says "the copy of your wm6.5 software is expiring with 30 days, on 1st of july"...... so is that means m$ is pushing us to flash new rom before july, lol~
so far, the 21500 rom seems quite stable on the device, so just keep everything cool~
one small question: how can make the VoiceCMD button back to working (not the software, just the button, i love to assign it as 'task manager')
so, thank you so much Ben in advance, take your time (one month should be enough)
i'll check this post frequently

genesea said:
i just got wm reminder today says "the copy of your wm6.5 software is expiring with 30 days, on 1st of july"...... so is that means m$ is pushing us to flash new rom before july, lol~
Click to expand...
Click to collapse
oh yea, btw, if possible can you turn the expring reminder off by changing some registry command in the new rom? thanks~

benjaminries said:
Hi all,
if anybody has additional suggestions for the ROMs or new info, I'm happy to hear from them.
Thanks,
-Ben
Click to expand...
Click to collapse
Hi
im also one of the users that looks for the lightest rom
Anyway if I may suggest something I always wanted to do (maybe one day I will)
but you can be the first to do so
Mega light Rom
First I will explain something I used to call "HR installation"
On the 64mb ram devices I used to save memory (rom and ram) by installing all apps to storage card
then HR my device
and then for every installed app make a shortcut from the "storage card/program file/app-name.exe" to "windows/start menu/programs" (copy exe and paste "shortcut to…" )
any app you have/add in your rom will take device memory
most apps can work directly from storage card (not apps with plugins)
what I'm suggesting is for you to install all the apps you want to the card
then hr your device and make all exe shortcuts of the apps
Cook only the shortcuts into the rom
now you make your rom clean with no apps
the apps that must have plugins can be cooked into the rom or be given as a cab file
(most apps can be found as a cab on xda)
MS office
not all users use MS office on there WM device
MS has issued office 6.1 as an update that can be installed to the card
(I have the cab for wm5 devices)
So you can issue it as a cab only or using the "HR Installation"
But if you use the HR installation for office you must assign all doc/docx to this exe (by using this freeware
http://www.freewarepocketpc.net/ppc-download-openwith-v0-1.html
or resco explorer)
What will happen?
when you issue your rom you will give the
1 the clean rom
2 the "program file" folder of your storage card
3 cabs folder
What will the user do?
1 install your rom
2 copy your "program file" folder into the storage card
3 tap on the shortcut he wants from the program screen
(If he doesn't tap on the shortcut it is as if he didn’t install)
This way you can add a lot of apps option but rom will be light and every user will decide what he wants only by tapping on the shortcut
This way of installing is a lot lighter then full installation
Can be improved
You can also add a link (ink) for the file explorer called "shortcuts manager " that will be located "windows/start menu/programs" and will point the file explorer directly to windows/start menu/programs
By tapping on "shortcuts manager" icon the user will be directly where unused shortcuts can be deleted
Such rom will be the lightest and I think the fastest

nice.. can't wait for the update.

well bro also u can use some latest apps in roms. like facebook windows live . some nice task manager. some other tweaking tools mostly used in other devices. so the best is to check some other devices rom postings to get more knowledge of apps and users requirements.
some battery fixes . some registry fixes and tweaking.
specially for most common uses like phone and sms or mms. which need perfection.
and best of luck. i know u will do great job. U ROCK

You do some great work around here. I've only been here for a short while with my 910c... but already your threads have been time and/or life savers...!
A suggestion - I don't know if it's possible, but there are a few registry tweaks around that help increase battery life on the 91x series (see other threads for info). It might be worth while to try and incorporate those into a ROM. I've already manually fixed mine... but a ROM that did it from the start would be golden!

Any news?
Any news on the new ROM?
July the 1st is approaching and I'm getting worried about having my Ipaq 914c blocked
Thanks again
Gunsfan

HTC Touchflo not installed :S

Hey guys. I bought a clone HTC Touch 3G from Davismicro.com
Basically, I've watched videos on the net and have seen people use these clones, and they come with HTC TouchFlo/Manilla 2D. Mine however, did NOT come with it installed. It just boots to the regular windows 6.1 pro menu.
Normally, I'd email the company but theyre on chinese newyear holiday. Can anyone please help me on tell me how to get touchflo installed on this device?
(If the device is a clone, its a pretty good clone. HTC Branding everywhere.)
EDIT: By not installed, I mean it is not on the phone. So it looks like I'll need the ROM or theme of it somehow. Help pleaseeeeee?

Lyth said:
.. EDIT: By not installed, I mean it is not on the phone. So it looks like I'll need the ROM or theme of it somehow. Help pleaseeeeee?
Click to expand...
Click to collapse
You can easily install TF2D (M2D). If you search XDA, you can get the cab files.

Thank you. Is there a step by step process? (I am unsure what to run/install once I would have the files on my phone.)

Lyth said:
Thank you. Is there a step by step process? (I am unsure what to run/install once I would have the files on my phone.)
Click to expand...
Click to collapse
You can download the application from here http://forum.xda-developers.com/showthread.php?t=398173
How to, basically..
1) download the .cab file to your PC and transfer it to your phone.
2) on your phone, run the .cab file and it will auto install.
3) after that, you can leave the .cab file or delete it.

Where is the .cab file on that link? When I click the blue "DOWNLOAD" letters, it leads me to a forum. I don't know what to get from the form. I'm new to all this.
EDIT: I got the cab from a post on that seperate forum on the DOWNLOAD link.
MY only issue is: After installing, the phone just says "Touch here to launch TouchFLO". I have a "clone" of a HTC Touch 3G, and I am running Win 6.1, and the MD2 is what I believe to be the newest version. I've searched here, and people mention to download some shared dll's or something. I have no idea what to do.
I downloaded the .cab file from the mobility digest forum post called "UPDATE 5-29-09 COMING SOON - FIXING ERRORS on Jade Manila 2D Build 1.20.19131520.0"
at "This is the link to m2d cab here: 2DManila_1_20_19131530_00"
EDIT 2: I downloaded cracing's m2d for non htc cell phones. And it works, but it seems kinda slow, and doesnt autorun. (Every startup, I have to enable it again. Any help on this? (The m2d for non htc cell phone is just an .exe that I run.). Plus I need to download like all of these programs to avoid getting errors. :S
EDIT3:Web Browser does not load through cracings m2d, albumsearcher.exe cannot be found, weather says its 36 degrees even though its WINTER (Obviously in fahrenheit. How do I change it to celsius?), and settings has all these blank buttons (which have little pictures of the phone beside them. How do I fix all this?

I am not sure how else to help you. I've installed on HTC Kaiser without any problem.
Your problems could be due to the clone set.

Ive got it all working now. Except I have an unrelated problem. Text messages work fine, but whenever I try to make a phone call it says "Phone: The operation failed".
Ive read online that this is because the phone is trying to send data while making the phone call. I do NOT have a data plan, and data service under the settings is 'OFF'. (I cant even turn it on. If I try, it just auto turns off after.)
Help?
edit: i got it to work. somehow. i had to turn everything off in settings, and then on again. :S Maybe the phone needed data service off eventhough it already was. Hmmph.

i have the same problems as Lyth.
AlbumSearcher can not be found or doesn't have a certificate.
in an older version it worked. but there were a lot of shell errors.
does anybody know how to fix it?