I installed the rom prophet_shadow_2.0_CE with the wm6.1, and my prophet was in excellent operation... happens that, for mistake, judging to be to install a theme, I installed a rom of the old wm6, and the telephone stopped in the initial screen of the phone operator. However I made soft reset and hard reset, and the telephone turned off entirely. I tried a battery of another prophet, and the problem is not of the battery. Ace times for 3 seconds the prophet gives life sign, but later it turns off once and for all. The Pc doesn't recognize the prophet for usb, I don't get to install any rom, because give error, saying that the prophet is not connected to the pc.
Did my prophet die once and for all?
just ley me know when u have tried everything. i have a friend in o2 service centre and he can make any xda perfect. but my sugggggestion is that stop experimenting more just keep ur device like that only on the charge thats all. and contact me
Can you enter bootloader?
Hold the comm manager button and soft reset.
Thanks to your help!
But noo, i can't enter bootloader, nor for soft-reset nor for hard-reset.
Unfortunately, the prophet doesn't enable!
Does the device respond to power at all?
try this
turn on you ppc then change the usb port connection plug it in and use Prophet_wm6_step1 rom i got it from this site it worked for me
Related
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
thierry86 said:
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
Click to expand...
Click to collapse
Since no hard reset is available... try removing the battery for the whole night.
If you do manage to get to windows then watch out for the startup folder, you're probably overloading the memory at startup.(htc home and psxut eat a lot at startup and windows as well)
i have removed the battery, sim and sd, and just left it there the whole night, but it still won't go further than the windows boot screen...
any suggestions ?
is is possible to do a hard reset by connecting it to usb and enter the bootloader somehow ? if yes, how ?
thanks!
hi,
have you tryed entering bootloader by the normal process?
"Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camera + Soft Reset, then release soft reset and keep pressing camera button till appear the Boot Loader.)"
regards
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
Okay then there is still hope.. When you have connected the device run an opdate tool like the NVID WM5 Rom.. that should work as a hard reset..
are there any working links available for this ? rapidshare seems to have disabled this...
thanks!
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
As long as you are able to enter bootloader then you can flash it with any old prophet rom. I had the same issue after installing WM6 rom. I used a Spanish rom on wiki to bring it back and then installed WM6 VII touch. So far it has worked well for a week.
HTC 6tab Home screen killed my 818pro!!!!!!
Here is what happened a few days back. My 818pro (aka prophet) suddenly heat up while not in use 3 days ago. I thought it was caused by the hot weather in my country (I was driving with aircond in full blast). The heating up eventually go away. Then 2 day later, after I put down a call, my phone just frozen / hung. Hence, I do a soft reset & guess what It never recovered & stop at the black screen with the dopod logo while restarting. Some service centre I visited told me that the main memory chip need replacement & reflash!!! I can't even see the window screen. I have use the HTC 6tab for 2 months & I am very sure it's the culprit here. Hopefully you are not having the same problem like me
Try plug in the ac charger before u do soft reset. My phone need it in order to restart after soft reset (after I started using the HTC 6tab Home Screen).
That is before my phone die yesterday
I have Imate K-jam G4
and while i was trying to flash it with the new WM6 i make mistake by the steps so I get Error and then my phone won't work anymore no lights and no power no charge .
I try to get the phone to the flash mode by hold the camera button and press the soft rest, it didnt work and the phone still off
i try to hard reset the phone by holding the communication button and the voice command button and click the reset button while iam holding and it didnt work.
i remove the battery for a while and get it back in and even this didnt make it alive,
this phone is special for me and i wont lose it, so i hope anybody could help me and i would be completely thank full for every advice
Its a G4,did you get it HardSPL or you were upgrading through SoftSPL,which rom were you trying to flash ?
Sounds all to familiar! Time for a new motherboard probably.
trying to be more optimistic than rmcknight....before searching for a new motherboard check your battery if it's completly dried out....try to charge it thrrough another phone if that doesn't work either check the "Dead wizard? NEVER! Let's revive!" thread here in the forum if you are a skilled technician...if not...it's time to search for a new motherboard....
Hi,
I have got my trinity phone one year ago and never had a problem since last week. When starting my phone, it stops on the first screen (with "orange" logo) and nothing more happens.
I tried to reset it without succeed. The phone is not detected by the "activeSync" to make it flushable.
Help please !
Yves Florent CK
my problem is mor or less the same... only that dont apears any image on screen and the green led is constantly on...
I have loaded a long time ago an old version of ROM Gelly.
This ROM worked perfectly to a friend who suggested to do the same with my trinity.
The PROBLEM is that when i try to open the pda it freezes to the first srceen showing the rom version and after....nothing!
I tried to load again Gelly from the bootloader, it begins to run, it runs about 1% then the trinity makes a flash (this means it loses the connection with the pc) and then shows me again the first screen....
Please i need help!
me to. i try install the rom original and my pda is living again.
try this to
hi,
2 things ...
have you tried a hard reset ? (hold both softkeys & hit reset button)
and when flashing:
when you first run the rom upgrade from PC with phone on Activesync, it is quite common for phone to hang at the bootloader screen ...
worry not -
just re-run the upgrade from PC again immediately, without disconnecting or attempting to switch phone off.
(the word USB should be visable on device under the coloured bars)
if you do get hung up at bootloader screen a hard reset should at least get you back to where you were, and you can try re-flash again.
hope this helps,
regards,
Kevin
My trinity won't work anymore...
Hi all!
My trinity wont't work anymore. When i press the ON/OFF-button, the display is lighten up a bit, then the buttons are lighten up. And nothing more.
When i will go to bootloader mode, it is the same.
And when i will to a hard reset, the trinity ask me to press SEND or END key for restore factory default or cancel. When i choose the SEND key, on my display some ridicoulous letters appear, but nothing more.
When i try KITL mode, everything is the same.
Can someone help please?
Because i can't do something on my trinity
EDIT (maybe this can help my helper ):
After some time, the display and the buttons are not lighten up anymore.
When i try to charging the battery, it only works, when the buttons are not lighten up (when i switch on, charging is ok; when the display is lighten up a bit, charging is ok; when the buttons are lighten up, charging won't work; when the display and the buttons are not lighten up anymore after a time, charging is ok)
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
never mind... problem solved... tks anyhow
weezer_88 said:
never mind... problem solved... tks anyhow
Click to expand...
Click to collapse
ok solved...
Can you tell how you did it?
Thanks
weezer_88 said:
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
Click to expand...
Click to collapse
But my trinity don't go to the boot screen, nothing on the display but lighten up slightly...
Nevertheless, can you please post, how you solved your problem?
THANK YOU in advance!
I downloaded the original Rom windows mobile 5 from http://www.htc.com/www/SupportDownload.aspx?p_id=3&cat=2&dl_id=111 then entered in KITL mode, connected the usb and reinstalled the original Rom, and all was fine...
Hi All
My Father has an SPV M5000 (HTC Universal). He has unlocked the SIM lock from IMEI number some time ago.
Recently it started going screwy and so he did a soft reset and then it wont turn on at all.
He has let me play with it and if I try a hard reset it comes up with the screen saying "press 0 to restore...", but if you press 0 it says "clearing now" and then appears to switch off. If you press x it also appears to switch off.
You can enter bootloader mode and it displays SERIAL on the screen - when you plug it in to a PC the screen changes to USB. But when I try connecting using MTTY I get no USB port - although selecting COM5 seems to open a command prompt window - but to be honest I dont know where to go from here.
If I try a soft reset it seems to do nothing - although the orange charging light blinks once.
With it connected to a PC in bootloader mode I was able to reflash the ROM and it went through all three stages correctly and indicated it had been successful - but when you finish with a hard reset it appears to turn off.
Before I use it to wedge my living room door open, can anyone offer any advice? I have perused the forum, but cannot find anything which seems to match the fault I am getting.
Thanks in advance
SlipMat
It is possible that the battery had it's day and can't sustain the full on mode. I suggest trying with another fully charged battery.
Thanks Enigma... but it is a new battery and is fully charged - I too have an M5000 and I have swapped the batteries over to check this.
Thanks
I have an Orange SPV M700 which has been unlocked, Hard SPL'd and a new WM6.5 ROM applied.
It has been working well for a few years now and is used daily as a satnav.
The other day, I left it and when I came back, it looked like someone had done a hard reset (blue/grey screen with "Press SEND to restore factory default, press END to quit" in blue.
I have tried pressing both send and end. I have tried both a soft and a hard reset and I have tried to get into the boot-loader screen. I have also tried my spare battery.
I keep coming back to the same screen.
any ideas on how I can get my phone back?
Can you still connect the phone to your computer or does it say not connected on the computer screen, if it was me an it came up I would re-install the same 6.5 rom.
Lil-Moss said:
Can you still connect the phone to your computer or does it say not connected on the computer screen, if it was me an it came up I would re-install the same 6.5 rom.
Click to expand...
Click to collapse
No, the computer wasn't seeing the phone. However, he problem has been resolved.
A work colleague suggested that the battery may be at fault because he had had a similar problem with one of his Palm phones. New battery purchased, inserted into phone and bingo! problem solved