please help me. i want change/repair lcd for my vx6800 but in indonesia is very hard for got that lcd. can i use another pda lcd for vx6800?
Related
I have dropped my SX56 and need to know where I can get a new LCD and how to replace it. Help!
Please respond to [email protected]
any help, any guide how to change the display ? thank you
Change your display !!
Here's the service manual
Send email to [email protected]
(couldn't attach file)
If your gonna change it, i suggest you change the LCD+Digitizer because if you plan on only doing one of them... good luck The digitizer is not only soldered on, but its hard as hell to pry off the LCD.
Hi!
I broke the display of my hw6915. Can I change the display and from what device could I take it? There are many broken devices at ebay...
Thanks for your help!
aziztheprophet said:
Hi!
I broke the display of my hw6915. Can I change the display and from what device could I take it? There are many broken devices at ebay...
Thanks for your help!
Click to expand...
Click to collapse
Hi,
I had the same big problem.
No way to change with other spare part.
The only possibility is to buy a 240x240 display, and after to find a specialist to exchange it. Here you can buy the disdplay:[email protected]
Hope this help you.
When I had my KJam, the touchscreen went but the display was fine. I was able to just replace the touchscreen for around $30 (touchscreen off ebay then found a guy to solder it). So if your display is gone but the touchscreen is ok, maybe you could just get the display rather then buying both together(save yourself a couple of bucks).
hw6915 uses sony lcd -part no:ACX538AKM-7 ,maybe you can try www.repairhppda.com to buy a replacement
LCD Only
The LCD, according to the previous poster, is a (Sony ACX538AKM-7) and is the same LCD as is in the hw6515. So you could get one of those and use it.
Hi guys, i followed all the indictaions on the official videos but i think i broke something! I had an HTC hd2 with a broken digitilizer but the screen worked fine. I bought a screen+digitilzer combo and replaced it but it didnt work.
The screen does not show anything (black screen) but the backlight of it is on!
I tought maybe was a problem of that lcd so i tested the original screen (that was working) and it does the same.
What could be the problem??
Please i need help
come onn, anyone ?
please guys, anyone ??
Sounds like a defective lcd to me. I'd try an RMA asap on getting another unit before your DOA warranty (if the lcd has one) runs out.
it's not the LCD. I had a working LCD but a defective digitizer, i bought the lcd+digitizer replacement and now both screens do the same , just the backlight is on. And before i change the screens the original lcd was working fine.
Could it be because the LCD is not correctly pasted into the chassis ? i really don't know what could it be the problem. The lcd is correctly connected to the mainboard. What could i broke in the process?
Thanks connexion2005 for the help anyways, is nice to see someone finally answered hehe!
zeba5 said:
it's not the LCD. I had a working LCD but a defective digitizer, i bought the lcd+digitizer replacement and now both screens do the same , just the backlight is on. And before i change the screens the original lcd was working fine.
Could it be because the LCD is not correctly pasted into the chassis ? i really don't know what could it be the problem. The lcd is correctly connected to the mainboard. What could i broke in the process?
Thanks connexion2005 for the help anyways, is nice to see someone finally answered hehe!
Click to expand...
Click to collapse
If you were not really gental with the internal parts of the phone, more presisly the ribbons that connect each part to the main board you could have cause micro cracks in the copper strips of the ribbons. Look at the closely with a magnifying. glass if possible.
today i was able to sync it literally with no idea of what i was touching. I also figured that the digitizer works , i was able it dial some numbers. The phone appears to work.
So, Backlight is on, Touch (digitizer) also works, but not showing anything on the LCD.
Could it be a mainboard problem ?? I'm trying to use logic because i don't know anything about cellphones and how do they work in terms of components.
Could it be the ribbon ? I dont think so, i have two screens and both of them do the same (backlight on but not showing anything).
I'm clueless!
Don`t panic. Calm down, watch a demolution tuturial. You probably miss smt. Good luck
But it could be a ribbon...
Hello,
I'm a user of the legendary HD2(thanks to y'all). I recently dropped it and something appeared on the screen. Not sure it's the digitizer or the LCD. The glass seems fine and touch response in the affected area also seems okay. Want to fix this soon so I don't know whether I should replace the LCD or digitizer or both. Please Help!