Related
hello, i have read and read all the wiki's, but ive not been able to fix my phone.
i use a cingular 8525 (herm100) phone, and cannot install any rom on the phone. I have two versions of the At&t ROM with radio's and tried them both, but they all stop at 11-12 %.
i have tried usind the sd-card method, and it does not pass the "GSM - " portion.
i guess the radio is not working or is corrupt or something..
my phone is now in bootloader and just says
HERM100
IPL-1.04
HERM100
SPL-2.03
please any help will be appreciated. thank you!!!!
wow.. can anyone even say "sorry"
geez.. 35 views, and not even one reply, or consolation message, or anything??
I would update your copy of Windows Mobile Device Center first (especially if you're using Vista). Flash SPL and the radio, then flash any rom to see what happens. I mean really at this point, it's already a brick... try some crazy stuff, you can't hurt it anymore than it already is. I did the same thing to mine a couple of months ago, and after trying these things, I got it working again without a problem.
update to hard spl ver.7.
try to flash
a). stock rom (sometimes this works)
b). radio only rom.
Also make sure you unlock your phone with this : http://forum.xda-developers.com/showthread.php?t=293665
Hope this helps...
ultramag69 said:
update to hard spl ver.7.
try to flash
a). stock rom (sometimes this works)
b). radio only rom.
Also make sure you unlock your phone with this : http://forum.xda-developers.com/showthread.php?t=293665
Hope this helps...
Click to expand...
Click to collapse
Just to make sure I understand, the unlocker you linked is to SIM and CID unlock, correct ?? And then on top of that - you should update to HardSpl also ??
I have an 8525 on its way that I will be looking to upgrade - just want to make sure I am understanding correctly.
roomtek*8525 said:
geez.. 35 views, and not even one reply, or consolation message, or anything??
Click to expand...
Click to collapse
sorry for the late reply
i have been dealing with this for 3 days and finally managed to run official AT&T rom for 4 days wout hard reset.
there is a method dumping an official himalaya rom to hermes. az pof explained in one of his posts all commands except radio commands are different in himalaya so it is safe to use dumping method.
it basically deletes everything in radio rom so you can install official rom.
PS: at first install official rom stucked %12 i said damn but in second try %15 third try success
i am at work now i dont have the link of method but try googling or searching my posts (not too much )
i hope it solves your problem
bartan
thanks guys, i've tried some things
i have tried using Hard SPL v.7 it does not work.
i have tried using official cingular roms too. stops at 11% no success.
i have tried upgraing radio only, stops a 0% and restarts the device.
i have also used mtty, with some text inputs, no success
i have even tried selling the brick on e-bay .... as you can guess no success.!
bill_in_mtl, sorry bout lateness of my reply ( net problems), yes you do unlock sim and cid. Sim unlock means you can use ANY simcard from any carrier and Cid unlock means you can flash ANY hermes rom (both official or cooked). It needs to be unlocked first as the spl is downgraded to 1.40 (I think) and you should REALLY be running with 2.10 olipro (hard SPL ver 7). I wouldnt bother upgrading to Hard SPL ver 9 a this is essentially only ver 7 with some neat features for developers but it does throw up an error message when you finish flashing a rom(no problems t just feels like it).
Hard SPL WON'T stop you from bricking your phone BUT it will make it easier to recover.
roomtek*8525, sorry to hear that but have you tried flashing with a cooked rom? This unfortunately wont fix the phone part but you will have a working PDA...If you've tried MTTY with info 8 and task 2a commands then thats the best to hope for, Sorry bout that..
Hi,
i am new to the forum, Please forgive my whining. I have being tryin to flash my imate Jasjam foe the past 3 days without success. i have gone through this forum front to back and tried almost everything. i have even downloaded almost everything you have but still my phone shows "NO GSM" wen booting. It dosent even flash. the closest i have to to is 13%. everything works perfectly except the GSM part. please i need help. im kinda a noob to the flashing thing so i would appreciate details on how to get this done. Thanks
Did you Hard SPL your phone first?
yes i did. i even used different versions of hard spl
Make sure you have Hard SPL ver7(phone should display in bootloaderIPL 1.04, SPL 2.10 Olipro) then try the sd card method of flashing an os. use a stock rom though to see if your radio can be fixed (this is the problem part). You need to format an sd card fat32 then copy the .nbh file onto it (not into a folder). rename it "hermimg.nbh" then put fone into bootloader(tri-colour) screen by pushing and holding ok button above flywheel, power button and using stylus to reset. HOLD ALL BUTTONS UNTIL IN BOOTLOADER... Follow instructions from there.
If you cant reflash your radio rom, you can still put a cooked rom on and use for a PDA but you won't be able to use as a phone again, sorry...
Hope this helps....& good luck...
thanks. i havent tried it with an sd card b4. i do that now. what version of rom do u recommend????
whats that feeling you get when you've felt like your going down that road again?
ps i got sick of trying to find the MMS settings menu in most of those other roms and just reloaded the default telstra one again! >.<
i was kinda hooked on CRC's roms, due to his locality of cooking but i dont mind some of the crystal ones Tyr0's
hi, i have tried the sdcard method. first i hard spled using v7 then i copied the nbh files as u instructed. i have tried it using different .nbh files and i have the same result. it gets stuck on the part where it is supposed to update the radio.what should i do pls
the "No GSM" is when the Radio Rom is blank, and is next to impossible to re-write. there is a section in the forums for this problem.
as far as things go, its probably now just a PDA, but keep searching the forums for people who have rescued their radio rom, you may get lucky
please can u point me to the thread??? i have gone through almost all the threads for a solution and so far i have come up blank.
try looking round here
http://forum.xda-developers.com/forumdisplay.php?f=306
might find some useful info here
http://forum.xda-developers.com/showthread.php?t=369434
also try the wiki
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
good luck
Depends on how you went about it.
If i were in your position i would try the following
Try a couple of Manufacturer roms WITH radios in it
ie
Try the HTC then try the Telstra 6.0 one.
Secondly check the sim slot.
Carefully bend the guides down and the 6 pins up so when you put in your sim it is very firm.
I had the No GSM problem this week and it turned out to be this (after numerous grief/fixes and workaround).
post back the results
i have pretty much given up on my imate. i have tried every method recommended by everybody but still, i've got nowhere. As a PDA, the device works very well but that is basically useless to me without the phone functions. Please if there is any new input, i would appreciate it. The device boots with NO GSM.
i have actually already tried a couple of "Manufacturer ROMs", dunno if they were good. could u point m eto where i can get any of those??? Thanks
Okay, well for some reason a month ago my 8525 unlocked was not recognizing the sim card anymore.... sometimes it would work and sometimes it wouldn't... when I boot up it says no GSM.. after searching around the net I guess what the phone is doing is called "bricked" so what I tried to do is use an utility to unlock the phone again.... that didn't work because it would get stuck at a certain percentage.. my next step was to try to reload the OS with the rom from HTC to try to see if I can manage it work....but it gets stuck at 11% with error 242..... now when I turn on the phone its just with the 4colors ... .also I don't know if at this point the battery charges... anyhow im stuck and I don't really know what to do.... is anybody familiar with reflashing this phone???? Would you be able to provide the necessary link and steps to get this phone up and running? :O
Sounds like your radio rom has gone fizzle.... No rom will fix this.... If its still under warranty you could see if there is a HTC official rom cooked without the radio rom ppart, ask someone to cook one or cook it yourself, eload that and then do a warranty claim. The radio rom is the most sensitive part of the device and the best anyone can say is to either flash a tock rom (which you've already tried) or flash a radio only rom. Would be good to know what radio you were using and try that. You should find the radio roms on the wiki.
Good luck...
my friend owns an 8525 and all of a sudden it stopped working (cant make/recieve calls and text messages). i tried doing a hard reset and it didnt work. he called att and the tech guy told him that his phone needs to reinstall the rom, which also didnt work. he bought a new phone and gave me the hermes so that i can play around with it. i tried installing wm6 on it and at 15% the update stopped.. and the phone reset itself. now.. it doesnt have a rom installed and keeps on going to the tricolor screen. i tried the unbrick method (in the wiki) several times and still no luck. it keeps telling me that i dont have enough ram but the booting still wont start. what are my other options for fixing this?... my kaiser was bricked before and i did the unbrick method for that and it work.. i havent tried that yet but is there any chance that it will work..?..
he doesnt need the phone anymore but hes hoping that itll be fixed so he can use it as a backup phone.. so.. yea.. any other ideas for ressurecting an old friend?
thanks!!
Sounds like the radio rom is dead.... Whats the SPL? You have a chance if it has Hard SPL installed - should say SPL - 2.10 olipro.
If so, try flashing a stock rom first, then a radio only rom. If you get no love, flash a cooked rom on it. I'd do it using the sd card method.
It should work as a PDA if you can't flash the radio, but its a brick cos no more phone calls...
If he doesn't want that, he could sell it on ebay for spare parts...
Cheers...
I just went through a similar situation last night. I am running dvh_79's v16 (build 19965.1.2.3) Lite. I added his HTC Today Plugin from the sdauto zip file but didn't like how the Today plugin slowed down my phone, so I uninstalled it and that's when my radio took a dump.
I used the instructions in the Hard SPL forum post #116 to unbrick it using the same rom and radio .nbh files and it went off without a hitch.
The first thing anyone should flash onto their phone is Hard SPL v7. Even before any skins. It won't make you 100% safe from bricks, but I'm damn glad I had it on there this morning while I was reinstalling my phone.
BTW ultramag69, I saw a lot of posts by you in various threads talking about unbricking a phone, and correct me if I am wrong, but if I have olipro 2.10 SPL on my phone (which I do), is it possible to initiate an install of a ROM image without being able to successfully boot the OS on the phone? Does Olipro automatically look for HERMIMG.nbh on the SD card? That was a point of confusion for me at first until I ran the HARDSPPL.exe file, but then again my phone didn't brick to the point I couldn't boot the OS.
What are the choices if you cannot boot OS? Are there any that can be performed from the bootloader itself?
Thanks.
well.. i did the kaiser unbrick procedure.. the mtty thingy.. it kinda worked. after that i installed the dopod wm6 rom... it handled the wm6 well---for a while.. after booting, the phone would turn off by itself (w/ 100% battery of course) or even restart itself..
sometimes it will stay on and be "fully functional" (w/o the calling and messaging still...) but somehow freezes when i look at the device information, specifically in the page where it displays the imei (which is missing btw...)..
the "phone" function doesnt work either, as it doesnt show the dialer.. and then after a few minutes, the phone finally freezes...
idk why this happens.. i tried installing other roms but the rom update always freezes. i tried 4 different roms already... so i had to do the mtty thing again...
(i have hardspl installed)
Codevyper, IF YOU HAVE hARD SPL INSTALLED, yes you can run the os flash. Just put the sd card in and reset. As the Hermes is going to the bootloader anyway it will recognise the flash file "hermimg.nbh". I've successfully fixed my phone when thats happened.
akosiryan, it sounds like you may have a corrupted radio rom. This is not gonna make you happy but this is ,at this point, almost 100% unbrickable. You could try to flash a radio only rom - no os, just the radio - but if it gets stuck and you've tried the stock rom then it looks like its a permanent brick...
You should be able to use as a PDA if you don't play with the phone functions though...
Just as a last shot, you could always use MTTY to check for bad blocks BUT this requires you to downgrade the SPL to 1.10 olipro to fix if you do. Please note though that sometimes the carrier does give you a couple of bad blocks to "brand" it as theirs...
Best of luck.
ultramag69 said:
Codevyper, IF YOU HAVE hARD SPL INSTALLED, yes you can run the os flash. Just put the sd card in and reset. As the Hermes is going to the bootloader anyway it will recognise the flash file "hermimg.nbh". I've successfully fixed my phone when thats happened.
Click to expand...
Click to collapse
Thanks ultramag69! I am indeed running olipro 2.10 on my phone so it makes me feel better knowing that if I can get the nbh on the card, then I can flash the ROM that way.
oh well.. me and my friend decided to sell his phone on ebay or sumthin..lol.. so its not a problem.. ill try to do one last step tho.. like flashing the radio only rom to see if itll work.. but i dont really care anymore.. lol.
No problem... If the Ebay from where you're from is like Aussie ebay, you should get approximately 1/2 to 2/3 the price that the working models go for. Generally the price goes up about 6 hours before the end of the auction with the price skyroketing in the last 10 mins... I'd probably give it a few days on Ebay to make sure people see it....
If you do get the radio rom working, Hermes (jasjam/dopod 838 pro) go for about $250 - $350Aud in Oz.
Cheers...
ok then! thanks
Hi, first post on the forum so please be gentle with me....
I have an XDA Orbit 2 which was until last Thursday working fine with the last official upgrade from O2 (Win 6.1, no idea about all the other stuff).
Whilst using the phone last week it suddenly died in the middle of a conversation. It wouldn't power on at all. I took out the battery, waited a couple of minutes, put the battery back in and switched it on. All that happened was the phone displayed the 4 colour screen with "POLA200 SPL-3.13.0000 CPLD-2" in the red section and "Serial" in the white. I repeated the battery removal exercise a few times, waiting for increasing lengths of time but nothing changed.
I had a fairly long search through the forum and have tried for a few hours now going through the various fixes suggested but I am getting nowhere.
It won't hard reset, all that happens is the message "No Image Found" appears for a very short time and I then get stuck on the 4 coloured screen with the message above.
The same thing happens if I try just putting the thing in bootloader mode.
I can't use any of the official O2 rom upgrades as the phone because all the PCs I've tried connecting to it won't recognise it over a USB link.
I've tried connecting to it using mtty, again on several PCs, but I just get a message "USB port can not open". Just in case I've uninstalled Activesync on one PC and got the same answer.
The "how to flash you polaris using the microSD card" originally looked useful but I have some problems with it.
The first is that I need HardSPL installing on the device, which I can't do because I can't get to it.
The second will be down to me not knowing where to look, but I can't find a ROM to download and copy to the microSD card as POLAIMG.nbh. I did manage to find a Win6.5 one (the HTC Polaris - PDaviet rom wm6.5 manilla 2d (core 23004) by tranminhman one) which I thought I'd try. I guess the idea was that if I could just get something working I could always reflash it again with a different ROM or maybe apply the o2 upgrade. Unfortunately the image was password protected and I couldn't find the password in the thread.
I'm kind of at a loss now so any help would be appreciated.
Cheers
Hey,
Sorry i can't help much you'll need to do a lot of reading and troubleshooting...usually it's the onyl way to solve it by trying all options.
I'm just posting this message to bump it up in this forum, but more importantly you should be posting in the Iolite section for help with that specific device especially if you're trying other ROMs.
Also if it died on you and you haven't begun to flash it, can't you send it to the service for them to fix it for you? That way you can rule out any hardware malfunction.
Best of luck!
Alan
Did you do soft reset
alanazar said:
Hey,
Sorry i can't help much you'll need to do a lot of reading and troubleshooting...usually it's the onyl way to solve it by trying all options.
I'm just posting this message to bump it up in this forum, but more importantly you should be posting in the Iolite section for help with that specific device especially if you're trying other ROMs.
Also if it died on you and you haven't begun to flash it, can't you send it to the service for them to fix it for you? That way you can rule out any hardware malfunction.
Best of luck!
Alan
Click to expand...
Click to collapse
Bit in bold er... cant quite understand why in iolite section as the xda orbit 2 is the rebrand htc touch cruise => htc touch find. Its in the right place.
On the side of what to do i the ony thing i can think of would be mtty and if that didnt work then try to reflash the official o2 6.1 release and see what happens when you try to do it.
You cant try to install any 3rd party roms they jsut wont flash as you dont have hard spl installed and cant do that until you have it running again.
Try the above and see what happens...
Hi Nik
I have tried just about every kind of reset, nothing has worked.
Hi Alan
If I can't get it sorted any other way I'll probably send it off somewhere but I'd like to have a go at fixing it myself. It will at least be a bit of fun!
I take then that I've posted this in the wrong forum. Oops, apologies.
Jon
You have not posted in the wrong forum look at my signature!
Hi jon,
Conclusion from post 1,
1) Uncompleted flash with new ROM or hardware problem (half way die)
2) Unsuccessful flash Hard SPL (cannot see Olinex 2.2 wording during bootloader)
3) Your PC & PDA fail to connect via USB (serial wording appear during bootloader)
Try this method,
1) Get shipped ROM from HTC web site, key in your country & serial behind battery
1a) Extract shipped ROM by WinRAR , take RUU Signed.nbh
2) Rename to POLAIMG.nbh put inside SD card, "flash using SD card"
3) Make sure your battery power more than 50% cause it take about 2 hours
Good luck, my friend
[Your request Password: TranMinhMan]
Nik Ahmad said:
Hi jon,
Conclusion from post 1,
1) Uncompleted flash with new ROM or hardware problem (half way die)
2) Unsuccessful flash Hard SPL (cannot see Olinex 2.2 wording during bootloader)
3) Your PC & PDA fail to connect via USB (serial wording appear during bootloader)
Try this method,
1) Get shipped ROM from HTC web site, key in your country & serial behind battery
2) Rename to POLAIMG.nbh put inside SD card, "flash using SD card"
3) Make sure your battery power more than 50% cause it take about 2 hours
Good luck, my friend
[Your request Password: TranMinhMan]
Click to expand...
Click to collapse
Thanks Nik
I've had a bit of a look round the HTC site and couldn't see a ROM to download so I've asked their technical support people if there's anywhere to download it.
Fingers crossed they'll help.
Jon
jonfsharp said:
Thanks Nik
I've had a bit of a look round the HTC site and couldn't see a ROM to download so I've asked their technical support people if there's anywhere to download it.
Fingers crossed they'll help.
Jon
Click to expand...
Click to collapse
Try to get official HTC ROM here, Select WWE (405) CID_001 for your country.
Good luck my friend
have u tried this?...
turn off, pull out the battery, then put it back, charge ur phone till the battery indicators shows green (which mean it's already fully charged) then... power on ur device.
it looks like a dumb suggestion , but... i have had a same situation
(HTC KAISER, not Polaris).
if it doesn't work, then try to upgrade with a POLAIMG.nbh (take it from official HTC ROM)
in a 2G FAT32 microSD root directory.
Nik Ahmad said:
Try to get official HTC ROM here, Select WWE (405) CID_001 for your country.
Good luck my friend
Click to expand...
Click to collapse
Thanks Nik
Much appreciated.
Downloaded the ROM as suggested, unzipped to the SD card, renamed the image to POLAIMG.nbh, stuck it in the phone and things got slightly more interesting.
In bootloader mode I now get a bit further. I get a grey screen which says "Loading ..." then "Checking...." then "00028002 Not allow". It then goes back to the four coloured screen as before.
However, does the fact that it is trying to read something mean that I have just got the wrong file?
I'll try a few more and see what happens.
Thanks once again, your help is greatly appreciated.
Jon
Hi oza
Yep tried all the battery pulling out stuff but got nowhere.
The ROM thing on the SD card gets further. I extracted the ROM from the official O2 upgrade, stuck it on the card and renamed it POLAIMG.nbh.
If I put the phone in Bootloader mode I now get even further than before. I get a grey screen with:-
POLAIMG.nbh -
RADIO_V2 -
BOOTLOADER -
SPLASH1 -
OS -
Press power button to start update image
Press action button to cancel update image
If I press the power button
I get an "Update In Progress" message and a progress bar.
After about 4 minutes I get a full progress bar and :-
POLAIMG.nbh - OK
RADIO_V2 - OK
BOOTLOADER - OK
SPLASH1 - OK
OS - OK
Update complete
UPDATE SUCCESS
And that's as far as I've got so far.
If I take the SD card out and try a hard reset I just get stuck on the 4 coloured screen I got before, but with no No Image Found message.
I get the same thing with bootloader mode and when I just remove the battery.
If I put the SD card back in I can go through the update process but I can't do anything
else.
So, have I actually made any progress? I'm not actually sure what I have updated and what state the phone is in at the moment. Is the fact that this didn't work an indication of a hardware failure and I should send it off somewhere.
Any advice on next steps would be good.
Jon
what is ur bootloader screen says now?
IPL...
SPL...
Before you can be helped you need to supply this information:
What rom were you using when it died?
What SPL are you using?
You used MITTY and fixes so I assume you're not a complete nunce and have hard spl on your phone, so on that assumption and ONLY if you have hard spl on your phone, try this:
If it isnt a hardware problem, then Its possible you have a dodgy radio flash issue - normally that would have been caused by a bad flash, but you indicated that this happened in use.
Provided it isnt a hardware, to fix this you need to either flash the radio (less reliable, but try it) rename the radio file to POLAIMG.nbh as directed before and stick on SD card.
The other thing to try is to flash a rom with a radio INCLUDED in it. Try and avoid fancy 6.5 beta roms and stick to 6.0 and 6.1 basic roms.
I believe Chavonbravo's VLIT roms come with the radio so try that. Its listed in the forum. I'm not providing links as I dont know what radio you were using and you really need to go for like to like or close. My preference is 1.59.44.02 radio rom if you find one.
Let us know how you do.
Lastly what radio and rom did you have?
Try this one M-AMINES if the radio you had was a 1.59.xx radio as it has the radio included.
if it was a 1.65.xx radio then try the VLIT naked rom.
oza_crazy said:
what is ur bootloader screen says now?
IPL...
SPL...
Click to expand...
Click to collapse
Hi Oza
Exactly the same as it did when it first broke. I get the 4 coloured screen with "POLA200 SPL-3.13.0000 CPLD-2" in the red section and "Serial" in the white.
No idea what the IPL is or was I'm afraid.
Jon
bally3 said:
Before you can be helped you need to supply this information:
What rom were you using when it died?
What SPL are you using?
You used MITTY and fixes so I assume you're not a complete nunce and have hard spl on your phone, so on that assumption and ONLY if you have hard spl on your phone, try this:
If it isnt a hardware problem, then Its possible you have a dodgy radio flash issue - normally that would have been caused by a bad flash, but you indicated that this happened in use.
Provided it isnt a hardware, to fix this you need to either flash the radio (less reliable, but try it) rename the radio file to POLAIMG.nbh as directed before and stick on SD card.
The other thing to try is to flash a rom with a radio INCLUDED in it. Try and avoid fancy 6.5 beta roms and stick to 6.0 and 6.1 basic roms.
I believe Chavonbravo's VLIT roms come with the radio so try that. Its listed in the forum. I'm not providing links as I dont know what radio you were using and you really need to go for like to like or close. My preference is 1.59.44.02 radio rom if you find one.
Let us know how you do.
Lastly what radio and rom did you have?
Click to expand...
Click to collapse
I've not been a big modifier in the past so it was just using the bog standard O2 software from the O2 website. The name of the file is "RUU_Polaris_O2_UK_3.13.206.0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe" so I presume that there can be information gleaned about things like the SPL, ROM and radio versions?
Not a complete nunce, no, but so very far away from being comfortable with all this. This post was a result of a good few hours trawling through the forums looking for help. Anything I have done has been the result of a post on this site and I am very grateful that there are people willing to share their knowledge.
Anyway, as for hard spl, nope it isn't installed. I'd never needed anything like it before the phone died and now that it has died I can't get onto it to install anything.
Yes, this happened right in the middle of a conversation after a good year or so of normal day to day use. As I said, I haven't needed to make any changes to the phone so the only thing I've ever done is upgraded it with software from the O2 site.
I'm beginning to suspect that without Hard spl my options are very limited and pointing towards either sending it off for costly repairs or just binning the thing. I am probably wrong but I'm guessing that the fact that I don't have it installed is the reason why nothing is happening with the "Update in progress" stuff that is happening now.
Radio & ROM, as above. Whatever the O2 update provided. From the filename radio would be 1.59.42.15.
Many thanks
Jon
jonfsharp said:
I'm beginning to suspect that without Hard spl my options are very limited and pointing towards either sending it off for costly repairs or just binning the thing. I am probably wrong but I'm guessing that the fact that I don't have it installed is the reason why nothing is happening with the "Update in progress" stuff that is happening now.
Radio & ROM, as above. Whatever the O2 update provided. From the filename radio would be 1.59.42.15.
Many thanks
Jon
Click to expand...
Click to collapse
Well whatever you do dont bin it, we can always use it on the Android project if you decide to go that way.
Ok.. so lets see.. the phone is not picked up at all in windows?
If that is the case, if even a serial connection cant be made then theres issues. At this point, I would disregard all the other advice as it only applies to a hard spl device unfortunately. SD card flashing and all other radio rom flashing will only work with hard spl as far as I know - definitely safer for certain and you dont want to wreck a repairable device.
I take it, its not under warranty, for your mention of costly repair.
The important thing at this stage is a serial or usb connection from a Windows PC. I think I have heard of forcing this connection by opening the device but this would really be in the realms of profficient repairer or enthusiast.
I'll have a look but also do some searching yourself for making a connection to a Windows PC and forcing an SPL onto a phone.
I dont know whether anyone's ever managed to HardSPL a phone using a memory card? Just a thought...
Who would have known.. have a read of this and see if you can follow it up regarding the spl through sd card ..
http://forum.xda-developers.com/showpost.php?p=3273438&postcount=7