I have theese screens on my SMT5600. The phone got stuck on splash screen so I hard reset. After hard reset I got the following screens. They say the phone is locked to enter unlock code and press the unlock softkey. Does anyone know why this happened... And how to fix???
Related
Hi,
Recently my pda(k-jam) fell from my pocket and it hanged. I did a soft reset but I get this error message "Press Send to restore factory defaults, Other keys to quit"
I tried all keys but in vain. I then did a hard reset by pressing the comm and the voice dial. (did a reset with my stylus). I still get the above error message.
Does anyone have any suggestion or idea how to reset my pda?
Thanks alot.....
Y dnt u flash it with a new Rom look around the forum for the new MOSKI ROM.
Thanks
Thank you for your suggestion, I will think of upgrading to molski.
But will it upgrade ? As a hard reset also doesnt seem to work and how do I get to reach the ROM if I am not able to see the other things?
Thanks
Please help...
Hi ,
I am a newbie and so would seek alot of help. Thanks in advance...
Couple of days back my pda fell and now after soft or hard reset the screen still shows this "press send to restore to factory defaults, other keys to quit"
I would like to upgrade to molski but they say I might have to downgrade my rom but I must first unlock the device. There are g3 or g4 device..how do I know what device my k-jam is...g3 or g4? How do I follow up or know?
Could anybody give me the link or solve my problem? As my k-jam just wont pass that screen..I tried looking into various topics but couldnt go about the first step I should be taking...
Please help!
Thanks
Hi,
Please help..after hard reset, it still does not happen to load into the factory defaults... I cant flash my ROM or anything ...as it wont progress further than that screen ... "Press Send to load factory defaults, or quit"
Anyone have any suggestion?
Hold down the camera button while resetting it. If you can get it to the bootloader (three color screen), you might be able to flash it with something and possibly rescue it. It does, however, sound like you might be screwed. Things break when you drop them, including plastic phones.
hi
Thanks but if I have to do a hard reset, I would already be holding the comm manager and the voice dial with the stylus to reset. Do I hold all the 3 buttons together while hard resetting ?
I have tried all the buttons after doing the hard reset but just doesnt get to the other screen.
Thanks for your help.
Hold down the camera button, Power Button and Pin in the hole. First relese the hole, then release the power button and keep holding the Camera button dis will bring the Tri-colour screen. There'll be some info. like IPL n SPL der
If IPL n SPL are like:
IPL 2.xx.xxxx or 1.xx.xxxx
SPL 2.xx.xxx or 1.xx.xxxx then ur device is G4.
if its like:
IPL 2.xx or 1.xx
SPL 2.xx or 1.xx then ur device is G3
if its G4 you need to CID Unlock that before upgrading it.
All the LUCK. Go Ahead.
Hi
Thanks,
I tried your steps but it still wouldnt work. But somehow I did the switch below the comm button and it showed me the screen to the somethign HTC innovation or like that.
I think I had to tinker with the switch below the button to get the screen working.Thanks for your help.
i was loading the Touch-IT v2.3 beta for wing rom when i got an error and my phone froze up and would not connect to the pc so i soft reset it and now my tmobile screen freezes on load if anyone could help me it would be great.
I got the bootloader runing but i just wanted to see should i try installing the rom again or reload the original 1
Try to install official Tmo RUU
Try pressing and hold camera and then press into the soft reset hole if its the wing and then try and run the hard spl...if that doesnt work then im clueless....hope i helped...
k thanks i got it now
i ve got the same problem.. how di you fix your??s
Try a hard reset push the soft reset button on the side and hold both of the soft keys keep holding the soft keys until a black screen comes up with white lettering. than press the call button hoped that helped
Sorry quick thread hijack.. im reading here and getting ready to unlock/flash my girlfriend's tmobile wing and was wondering.. if you brick your phone, does a hard reset always return your phone to working, OEM condition? or is it possible that you could permanently damage it beyond hard resetting repair?
Thanks!
you can brick your phone beyond repair, but its actually rather hard to do so. Most people THINK they've bricked their phones, but they actually haven't. Just HardSPL the phone, and it will be virtually unbrickable.
Hard reset essentially reflashes your rom over your current installation. it wont return it to the original rom that came with the phone, but i will reset everything.
thanks! i'll remember that.
T-Mobile MDA USA weird, "fixies" dont work, stuck in "press send to restore"
Hi, sorry for my poor English is not my first language
I have a T-Mobile MDA USA and happened a weird thing, my phone works properly, was CID unloked and sim unloked with TNT_5.0_Wizard_TouchFLO ROM but 3 days ago I put the USB (PC)to charge the battery, lately when I back to pickup my phone I see in the screen of the phone open and close or put an quit windows explorer(mobil) repetitively, i try to close manually tapping in the "X" but explorer continues opening, then I see in the bar where you put the web address the number "3" and "8" was typing continuously, like when you hold pressing the buttons, but nothing was pressing or making pressure to do that, since I cant close the explorer with the "X" I turn off the phone, when I turn on instead to load normally, appears the Align Screen and for some reason will not recognize the Screen Tapping to align the screen, so, I turn off/on again, but in this time shows a black screen with "Press Send to Restore Factory Defaults, Other Key to Quit" in withe letters, it is stuck in there since, before to put this tread I have read this forum and still I am lost, because i do a Soft Reset or Hard Reset #1,#2,#3, I enter into a bootloader mode to re-flash the ROM with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ... IPL/SPL 1.01 and when finish to flash, its suppose the phone restart and windows loading but instead that I get again the same black screen with "Press Send to Restore Factory Defaults, Other Key to Quit" in withe letters, ok, maybe with other recently ROM, then I enter into a bootloader mode to re-flash the ROM... AGAIN... but now with ruu_prodigy_226102_22610105_022511_tmous_wwe_ship... IPL/SPL 2.26 ... and AGAIN I get the same black screen with "Press Send to Restore"... I try to press send key always, but nothing happens, is still stuck there always, I could not get past that, I would really appreciate any help. Thank you so much.
I hate to ask this, at the risk of sounding too obvious, but are you sure that it was CID unlocked properly? I have a Cingular 8125 with IPL/SPL 2.25 and I know it was a hell of an effort to get it CID unlocked, five or six tries before it worked properly and I was able to flash successfully.
l33tphreak said:
I hate to ask this, at the risk of sounding too obvious, but are you sure that it was CID unlocked properly? I have a Cingular 8125 with IPL/SPL 2.25 and I know it was a hell of an effort to get it CID unlocked, five or six tries before it worked properly and I was able to flash successfully.
Click to expand...
Click to collapse
yes was CID unlocked properly, I do it with lokiwiz02b like 3 moths ago and I use Wizard Service Tool to see was really unlocked, I could flash any ROM since was unlocked I could use crosbow,faria, Molski even TNT.20273_Professional ROM's but I prefer use TNT_5.0_Wizard_TouchFLO because I feel my phone works more stable and speedy... searching in treads I see Im not the only one with the same problem (stuck in a black screen with the legend " Press Send to restore factory default, other keys to quit" in white letters) but in that treads no one get answer how fix this problem or how get out of the black screen.
like I say before I could put my phone in bootloader mode and re.flash the ROM wherever I want to try running ROMUpdateUtility and always I reach 100% then, when its suppose the phone restart and you will see the windows logo or T-mobile, don't happen that, instead I see the famous black screen with white legend, so the legend says me "press send"... I press send, or any key and nothing happens... I read in other treads when you press send the phone formating but this is not the case, just don't do nothing,.... realy I need some help here
thanks
Hey!
I have the same problem as described above. I've been using CR96 Touch HD WM 6.1 with soft SPL unlock for couple of months with no problems until tonight when I noticed that my phone is hanged. I did a soft reset, but the phone gets stucked at "press send to restore factory default, other keys to quit" screen. At that none of the buttons work, soft resetting just puts it back to this screen, the same goes for taking the battery out. There have been no software or registry changes within weeks - just using basic phone functions. Is there any way how to fix this or what could be the problem?
Thanks in advance
I just got a Prophet which was flashed to a WM6.1 ROM. I did a hard reset but now I get to the start screen where I am supposed to unlock it, but the touchscreen doesn't seem to work. I press the Left soft button to do the unlock process, but when I tap the unlock button that comes up nothing happens, as if the touchscreen is not working.
Touchscreen is confirmed to be alive before the hardreset, any ideas what happened? I don't even know why it's locked on startup usually you do the configuration stuff after a hard reset (Must be the ROM that's on it)
I am thinking I will have to flash a new ROM but if there is a way to fix it without reflashing that would be better.
Nevermind guys, I don't know what went wrong but a quick re-flash fixed it.
Hi everybody,
on my Trinity hard reset doesn't work anymore. After for example flashing with a new rom bootloader just blinking. OS is booting normally but hard buttons doesn't work only the "joypad" in the middle. For hardreset i have to press Send button to accept hard reset when i remeber well. But nothing happend when pressing the button. In fact that the device wants a hardreset, softreset is the same problem. I have to replace battery to access OS and boot device. Has anybody a solution? Or is there a progam for WM which can make a hardresend?
€dit:
Is it possible that something is wrong with the bootloader?
thanks and best
Robbat