Database Users

Invalid Vendor Id and upgrade to wm6

i have the c800 with rom 1.7 , i would like to upgrade to newer version at 1.8 but at 2 % was stoping with note : INVALID VENDOR ID
Can somebody help me to this problem, i would like to upgrade to wm 6 and need the radio version more than 2.71 instead the original asia at 2.69
This lowest version make the signal always keep searching on gsm..with wm 6 os , really sad for this problems..hoping somebody can help this problem

Invalid Vedor ID means that your device is CID-locked, so you can only flash official ROM's to your phone. You can however unlock your phone at imei-check.co.uk.. BUT a person has already bricked his device with this, because it did not work properly! At this tim of speaking there is no alternative for CID-unlocking.

CID unlock...
...i have an Herald to. The OS was in finish(i think)...the only way i found to write an WWE OS...wrote to IM CHECK.CO.UK...in same day send me the application for my IMEI to unlock. I made the unlock under Vista Home Premium...now i have a brand new WWE OS in my HERALD.
Try it...it realy work.

CID unlock...
http://www.imei-check.co.uk/

But the CID unlock for what is? It's for a phone which is blocked to a company?

benmuliono888 said:
HELP PLEASE
Click to expand...
Click to collapse
Why are you posting like you have the solution and instead you are looking for help?
If you do so, only people with same problem like you will read your post!!!!
Christian

schumy said:
But the CID unlock for what is? It's for a phone which is blocked to a company?
Click to expand...
Click to collapse
For the lock that is set by the company indeed

benmuliono888 said:
HELP PLEASE
Click to expand...
Click to collapse
The title of your thread is a little bit too optimistic don't you think? If you have the solution, kudos! But if not, please watch your title.. I almost jumped a hole in the ozon layer, but too bad...

need help ( german to english)
hi
i have a german os herald need to convert it to english...have tried every thing cid unlock and all ..is shows invalid vendor id..please i m dying to use this phone i v bought it with my hard earned money..... somebody please help me ...

kunalg7 said:
hi
i have a german os herald need to convert it to english...have tried every thing cid unlock and all ..is shows invalid vendor id..please i m dying to use this phone i v bought it with my hard earned money..... somebody please help me ...
Click to expand...
Click to collapse
While the phone is on, press the soft reset button with the stylus while holding the camera button. You should then see a tri-colored screen(this is the bootloader mode, to exit simply soft reset again). What version does it say next to IPL? If it is 4.0 or higher, you need to flash HardSPL, found here. Don't do it anyway if your IPL is lower than that, it will turn your phone into an expensive doorstop. If you do have the right IPL, then proceed to flash the HardSPL, then choose your ROM and install it. However keep in mind, you won't be able to install any official ROMs while HardSPL'd. But official ROMs suck anyway.

Herald Unbrick... At least!

Well, finally I get my device running up again! Unfortunately I wont publish it, maybe I will charge for total solution.
If u are interested, contact me by PM. This is a mail-service, so u have to send your device to me (so you pay for package sending)
Device OS recover 100%, Phone part recovered too.
Dont know If unlocks too bcoz my bricked device was unlocked state. Anyone that wants to send me a locked Herald (to test if unlocks too), would be really appreciated.
Thank you everyone for your support+post and if u want to donate, come on! Its time
See ya s00n
ps. for the Technically Experience devs/users, solution is not what u think its more complex and easy than you'll know!

wait....how did your herald get bricked?
i assume it was during a failed HardSPL

yes dude unfortunately
but the main here is to recover OS area... at least

I bricked mine and have just ubricked it. Its easy, connect USB to PC, enter bootloader, run any RUU wizard.
* Enter bootloader - Press and hold the camera key, then press the soft reset button. Hold the camera button until the bootloader menu shows it. You will see 3 different gradient colors.
For details check http://forum.xda-developers.com/showthread.php?t=327046
Good luck

if the above does not work, try flashing using the USPL

tramuyo said:
So I started this. Sounds crazy, but it can be done...
Click to expand...
Click to collapse
Hi,
I think, it's a good idea. Actually I thought about something like your thread but if you don't mind I will say something in your thread.
I've got the same problem as you've got. Moreover, I've seen a lot of users posting on this forum, which have got such a problem with their Heralds. They boot only in tri-color bootloader mode and even RUU dedicated to our models doesn't work, saying Error 300. When we are trying to use MTTY to run getdevinfo command, as a result we can see error message. That's why RUU can't check the right CID in our devices.
All known solution for Heralds don't work with our problem. We should develop or wait for being developed by someone (Olipro,pof,mestrini,...) suitable solution. There are fine solutions for bricked Wizard or Hermes so it should be the way to unlock our Heralds, too.
My idea is to count all users with bricked Heralds to see the size of the problem and to show our great developers on this forum that it is important to find a way to unbrick our Heralds. Or maybe we should establish the prize for the person who will be the first in finding the unbricking method and than donate him? I think it could motivate some of them...
So, all bricked Herald's users, please leave your post in this thread, to show the world that this is a huge problem!
My Herald is Dopod C858 (I think so, because I'm not the first owner and this is what I was told about)
IPL: 1.11.0001
SPL: 1.11.0001
Regards.

a bricked one
here is one bricked, have htc p3450 with
ipl : 1.08.0001
spl : 1.08.0001
only bootloader and RUU with error 300
hope to find solution.

mine is bricked
IPL 1.08.0001
SPL 1.08.0001
trying with every solution: forced RUU, patched RUU and their DLLs, WM5 emulator, SD-Flashing + heradiag
I was thinking in something.. Do u remember PDAVIET first version for Prophet? You cannot flash PDAVIET WM6 directly.. U have to flash a special PDAVIET WM5 to prophet first, then PDAVIET WM6. And... when u got a bricked prophet device, the solution is...? PDAVIET WM5 special rom
So, i'm on it. working hard!!

Forced RUU? I know that the Univesal has an RUU to bypasses any and all checks and just starts flashing the ROM. I wonder if this would help... I assume the IPL is still fine unless it was overwritten in your devices because it's in a different memory address in devices with an SPL lower than 4.0.0.0. We would have to create our own RUU, though.
EDIT: After some research, this will not work. If the radio was damaged but the radio bootloader was not, there might still be hope, if the radio bootloader was damaged, then it's a no go.

Ive tried with Bepe's RUU (Polaris Premium BEPE ROM) but have no luck... maybe i should try to patch IPL/SPL in RUU check
keep goin...!
UPDATE 2:

HEY
how progress on unbricking
hopefully you get it working

first sorry about my language...
at last , what the members do??? (with IPL:1.08.0001 and error 300 )???
is there any solution?????

all the members with IPL 1.08.0001 and error 300 issue are welcome
ps. need RUU Blank Device application, or a customized RUU
anyone would help?
#2 just waiting days to post a NEW, KILLER topic bcoz im just getting bored

it means we should give our ppcs to repairman to change their motherboard??????????????

no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us

tramuyo said:
no bro, i just not find some support on the members. none of the mods has been presented a "suggestion" to fix our devices. Ive talked with OliPro, seems he have a solution for that, but he's working hard on it. Maybe he can provide some solution for us
Click to expand...
Click to collapse
hey men...
you can test http://s131209249.online.de/e-plus/4350main.html
it can be usful

thank you for your suggestion.. its a German ROM, i will analyze it if can be converted to a another thing..
also ive found ExtROM updater (this is new) so Ill analyze that too
thank you bro

new solution
Dear all
Good day !
Please check below link :
http://s131209249.online.de/e-plus/4350main.html
I gess you can solve this Problem to First :
install WM5 ( no mater what language you use ,only to get your PPC back to work as a workable part )
secound :
Use WM6 to start as a usuall PPC ,
Please inform us ( we are Iranian WEB master in Iran for Update & every thing that will be involved) the results & solving some of our Friends Problems in iran too ,
thanks
Your Truly
Sami

dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))

tighoor said:
dear smikhan.
i am an iranian too...
(((samikhan... shomaro too mobilestanam dide boodam ke...
man alaan zadam yedune p4350 ro inshekli kardam... felan paitakhte...
inravesh ro age gushim az paitakht oomad test mikonam
too pitakht bordam namaayandegie YAAS migan bayad mainesh avaz she 230,240 toman...
vali dar soorati ke moshkele sakhtafzaari nadaare.)))
Click to expand...
Click to collapse
Dear Tighoor
Hope this Email Finds you in good Health & Great Sprit !
No dear ,, this is not Hardware Problem , because You know better than me , this Problem happens while you have Problem with Core ROM ,
I'm really get fascinated to hear the Result from you ,
I'm really Hopeful that this Problem get solve by this Method ,
Please don't lessen to YAS company !
Believe me , they don't have any information about PPC , they just import & warranty
parts !
I'm Purchase manager Of matrix warranty !(www.matrixfzcuae.com)
so I know their ways ,they just import & sell ,nothing More
Please kindly do this Method & I think this Problem will solve !
thanks
Best regards
sami

how to erase radio rom from hw6915

does anybody know to do that?
i think "no gsm" problem exist because radio flash zone is not empty and it cand be done e full flash.maybe someone descovered the real address of starting rADIO module.
or any command in BOOTLOADER to reveal this...?
waiting.........

fradory said:
does anybody know to do that?
i think "no gsm" problem exist because radio flash zone is not empty and it cand be done e full flash.maybe someone descovered the real address of starting rADIO module.
or any command in BOOTLOADER to reveal this...?
waiting.........
Click to expand...
Click to collapse
ur phone is now dead, and there is nothing u can do about it.
sorry, but this is the real thing
we stay and hope for better days!

NO GSM FIX FOR SOME hw6500 / hw6900 Series
NO GSM FIX FOR SOME hw6500 / hw6900 Series
http://forum.xda-developers.com/show...=377495&page=6
POST #56

How flash the ROM from Mini SD Card? Please!!

My device was suffering crash(no GSM when rebooting) yesterday when I was updating my device,I know that was my fault coz I did not check the ROM if it's support G4...
Whatever! I need you guys' help,tell me how to flash the G4 ENG WM5 ROM from the mini SD Card for my Hp6915.
I already had the G4 ENG ROM in my laptop,what I should do in the next???
Your kindly help is highly appreciated!
Regards,
Brose

......I'm still waiting for your kindly help,please!

wow... hard thing. frist try to pass your SD informationto your PC ... many friends should have minisd reader or cellphones that reads miniSD ... then should be easy... there are a lot of threats about flashing...
http://forum.xda-developers.com/archive/index.php/t-358978.html
http://forum.xda-developers.com/archive/index.php/t-325683.html
http://forum.xda-developers.com/archive/index.php/t-353283.html
VRchaos (Perú)

Hi man....To be honest,I don't know what they were talking about,I'm a donkey to know that Pro info......
Could anybody just tell me a simple solution to repair my device?
Regards,
Brose

Someone help me,please..........

**** out of luck
bramblyrose said:
Someone help me,please..........
Click to expand...
Click to collapse
You are **** out of luck, just like me and everyone else

is it because while you are trying to update ur radio rom, the process didnt complete and ur ipaq stuck at HP logo startup??
if yes, try to reinstall the radio rom again. BUT first of all, u need to stop all those running programs on ur pc by using taskmanager on ur pc. after u cleanup all those running programs, then reinstall the radio rom again.. let me know whether it success or not.. thx..

cdguider said:
You are **** out of luck, just like me and everyone else
Click to expand...
Click to collapse
No one can figure this out??? Holy****,what the hell lucky I am!

christiankirana said:
is it because while you are trying to update ur radio rom, the process didnt complete and ur ipaq stuck at HP logo startup??
if yes, try to reinstall the radio rom again. BUT first of all, u need to stop all those running programs on ur pc by using taskmanager on ur pc. after u cleanup all those running programs, then reinstall the radio rom again.. let me know whether it success or not.. thx..
Click to expand...
Click to collapse
Hi,buddy,thanks for your help.
I swear to god,I tried to upgrade & flash the Radio.nbf,but it didn't work coz the upgrade tool always was warnning " xxxx is error",and the upgradeing just stuck on the bootloader mode,****! This ****ing stuff really drives me crazy!

have u end all those running programs on ur task manager (PC).. sounds like very simple, but it will affect ur upgrade process significantly..
bramblyrose said:
Hi,buddy,thanks for your help.
I swear to god,I tried to upgrade & flash the Radio.nbf,but it didn't work coz the upgrade tool always was warnning " xxxx is error",and the upgradeing just stuck on the bootloader mode,****! This ****ing stuff really drives me crazy!
Click to expand...
Click to collapse

make sure wcescomm.is terminated

Are you listening
We have a hw6900 Series, A propeitary device, not like the wizard, hermes, ......
Our devices are CID Locked, etc, As far as upgrade via minisd, don't count on it unless you have a fully working device, you will end up at the cal checksum screen, hell even if you did have a fully working device, it still may not work, I have already posted how to at least backup rom to minisd, as far as flashing through mini sd, do not count on it, I have downloaded damn near every sable program out there and beetles. Nothing, NO GSM, If your GSM is fried then, You have a paperweight, you can still use the os, don't count on it as a daily device. Email me if you have any questions, I can point you to all the tools you need,
Serious man, first thing first, we don't even have a rom to flash via sd in the first place.
[email protected]

NO GSM FIX FOR SOME hw6500 / hw6900 Series
NO GSM FIX FOR SOME hw6500 / hw6900 Series
http://forum.xda-developers.com/show...=377495&page=6
POST #56

NO radio signal ! pls help...

Hi guys , I'll appreciate any kind of help here ...
My Current settings
Device ID : ELF010050
CID : DOPOD001
IPL : 3.10.0002
SPL : 3.10.cmon
ROM Version : 3.14.706.02
RAM Size (MB) : 128
ROM Size (MB) : 256
Model No. : ELF0100
RADIO :03.34.90 Protocol 4.1.13.71
Have read so much, but I just don't get it
Have tried many combinations ROM'S , SPL , IPL , radios .. everything !
But still My phone won't see my local network ( roamming ) ..
Phone in Comm Manager keeps turning on and off , trying to catch the network .. this happens with all the roms I have tried ... including the original ROM and radio
When I put the sim card in .. phone says that its not possible to register my network , and if I want to set another operator ..
Someone with a clue ??? Is it possible to be a hardware issue
Regards,

I'm not really ana expert.. but maybe your device isn't SIM-Unlocked.. check this to unlock it..
hope this helps you

Fa7my said:
I'm not really ana expert.. but maybe your device isn't SIM-Unlocked.. check this to unlock it..
hope this helps you
Click to expand...
Click to collapse
Yes , but maybe its lock in a "wierd" way ...
Cause when I have seen SIM lock devices ... It's a different story and in most cases you get SIM not recognized Alert or something like that ...
Gonna give it a try ...
Thanx for replying with this info !
@edit
This generates an unlock code ( wich I have ) but I'm never ask to type it ..

Another possibility, the device was stolen or lost and it's network locked.

a similar problem happened to me also ... it was the problem with the sim card.. i changed the sim its fine now... why not u try that.. know not this is the solution but u can give it a try..

tito12 said:
Another possibility, the device was stolen or lost and it's network locked.
Click to expand...
Click to collapse
Not a chance , its no that ..!

vinoob said:
a similar problem happened to me also ... it was the problem with the sim card.. i changed the sim its fine now... why not u try that.. know not this is the solution but u can give it a try..
Click to expand...
Click to collapse
Thanx , but USim works ok in other phones, its really wierd !
The phone (radio) keeps turning on and off ( COMM MANAGER ) .. I dont mean mean the hardware ..!

pvillasuso said:
The phone (radio) keeps turning on and off ( COMM MANAGER ) ..
Click to expand...
Click to collapse
I have this problem too. Selecting the network manually helped a little bit, but not completely

[email protected] said:
I have this problem too. Selecting the network manually helped a little bit, but not completely
Click to expand...
Click to collapse
Tried that , but no network detected !
Maybe its really a hardware problem !
Thank you all guys , for replying
Cheers !

pvillasuso said:
Thanx , but USim works ok in other phones, its really wierd !
The phone (radio) keeps turning on and off ( COMM MANAGER ) .. I dont mean mean the hardware ..!
Click to expand...
Click to collapse
i get the same problem tbh, and i use 2 sims, one i can check the status of in at work (work for a big UK mobile phone network)
i think it is something to do with the radio version, cos i use 3.34.90 aswell and thats when the problems started for me i believe
have u tried downgrading the radio version?
as this seemed to work with me
it may also bve a good idea to check with your network carrier to see if there are any cell mast issues as that could be a cause.
(sorry in work mode now lmao)

hi, i had the same problem. first i couldnt write contacts on sim, then losses of signal, but sudden, i lost all signal.
i replace the sim an now works fine.
try to clean the phone, in the inside, it has some contacts to the antenna. i did it and work fine.

replace with new battery

SIMLOCK
try to run ´deviceinfo´ package that´s here ... somewhere.
if it shows mcc+mnc info empty than it´s not unlocked
read more to find how you could unlock your phone in this case

About radio version
Yes, u should try device info if it shows mcc+mnc info empty than it´s not unlocked
if not than
can u tell me ur radio version (i.e.) 3.34.90 is come with handset or u upgraded
if u upgraded than downgrade to 3.21.90
3.21.90 has no bugs a good one i have also downgraded to it
________________________________________________________
My Device:-ELF(in)
ROM:-Onlyx 6 R11
IPL:-3.10
HSPL:-3.10 comnex
RADIO:-3.21.90
MEMORY:-8 GB microSD

realshyfox said:
try to run ´deviceinfo´ package that´s here ... somewhere.
if it shows mcc+mnc info empty than it´s not unlocked
read more to find how you could unlock your phone in this case
Click to expand...
Click to collapse
where is this info for when mcc and mnc are populated with no radio signal - this would really help (Sorry If I am being lzy and not searching - I may do later but football is on!)