Hi
This question has been asked a couple of times, but I haven't found any good answers.
Is it possible to change language layout by registry only? or does one have to make a cab for it with specific dll's?
if so, can someone explain which files and how to do it?
I wanna have a swedish layout, and I am quite sure that there are other layouts that can be fixed as well. Just like Schap did with TyTN and TyTN II hardware keyboard.
Advanced Configuration Tool by Schap
Advanced Configuration Tool by Schap is supposed to do this from the settings which should change the registry, but it is not working for me, at least not with Asergs ROM.
I would also be interested in this....
Thanks in advance.
/Mehrab
Mehrab said:
Advanced Configuration Tool by Schap is supposed to do this from the settings which should change the registry, but it is not working for me, at least not with Asergs ROM.
I would also be interested in this....
Thanks in advance.
/Mehrab
Click to expand...
Click to collapse
not quite right, Schaps tool for changing language is only for hardware keyboard. not the SIP.
Related
i have a wizard runing qtek-wwe rom qwerty keys work ok but not the symbols they seem to have shiften 1 space left the (s has !) (the d has @) ect i would like uk layout please, is there a quick fix i have seared and forum for some reg hacks but these dont seem to work help please
mrbubble said:
i have a wizard runing qtek rom qwerty keys work ok but not the symbols they seem us i would like uk one please, is the a quick fix i have seared and founf some reg hacks but these dont seem to work help please
Click to expand...
Click to collapse
Did you install a US ROM? If so you should be able to fix this by installing a WWE ROM I think.
Yes you can fix it, its a simple registry entry, in the
HCKU\ControlPanel\keybd entry
add a DWORD called LOCALE with a value of 0809
Regards
Riptos
Hi. I Would Just like To Know How To Create A Cab File That Had All The Settings I Used On My Phone.
I Just Upgraded The Firmware On My TyTN To The AT&T AKU 3.3 Rom And Being From The UK This Ment I Had A Lot Of Information To Change In Order To Get My GPRS,WAP,MMS,E-Mails And Keyboard Layout To Work Again. It Would Have Been Really Handy If I Had Had A Cab File Wich Would Have Added All That Data For Me.
So I Was Just Wondering If Anyone Knew How To Do That.
Cheers
I don't think that's possible.
Even if it was possible, you could have lose some settings when upgrading, because registry keys' locations might have changed.
Hi guys.
I have just upgraded my diamond with the last SFR rom. I need to change the CommManager elements : i need the 3G/GSM tab instead of the DirectPush one.
I have tried many tweak softs : advanced configuration doesn't work on this new rom (perhaps 1.93), diamond tweak doesnot offer the tab choice possibility.
And i don't find the answer on xda.
Could you help me ?
Thank you so much for everything. All your progs are really good ones !
Please guys ... That's a really big problem to me.
Tx
milillicuti said:
I have just upgraded my diamond with the last SFR rom. I need to change the CommManager elements : i need the 3G/GSM tab instead of the DirectPush one.
Could you help me ?
Click to expand...
Click to collapse
Perhaps this CAB file works? Download it and install it. I've used it earlier and it worked out well for me
http://forum.xda-developers.com/showthread.php?t=402012&highlight=manager
sibbor said:
Perhaps this CAB file works? Download it and install it. I've used it earlier and it worked out well for me
http://forum.xda-developers.com/showthread.php?t=402012&highlight=manager
Click to expand...
Click to collapse
Tx Sibbor.
That works. But i can't choose the tabs i need as i could do with advanced config.
I have the 3G i need, but some other disappeared !
Does someone have another solution .
Tx
milillicuti said:
Hi guys.
I have just upgraded my diamond with the last SFR rom. I need to change the CommManager elements : i need the 3G/GSM tab instead of the DirectPush one.
I have tried many tweak softs : advanced configuration doesn't work on this new rom (perhaps 1.93), diamond tweak doesnot offer the tab choice possibility.
And i don't find the answer on xda.
Could you help me ?
Thank you so much for everything. All your progs are really good ones !
Click to expand...
Click to collapse
That ROM probably has .netCF 2.0 instead of 3.5 which is the one needed for Advanced Config to work.
You can get it here.
FInixNOver, that's exactly what i did before i read your answer. That was the problem. Now it works fine.
Tx
Hi
I'm looking for a way to have dutch t9 on my Polaris. Currently I have only managed to instal a bunch of cab's and completely ruin my settings and need to reflash to correct the mistakes I have mad (installing a cab with language from Diamond). Could somebody who already succeeded help me with a step by step tutorial?
I don't have a step by step tutorial, but I would be interested in translating to dutch too. I saw this thread some time ago, but didn't have the time yet to try it out. Did you try that?
Try the gullum keyboards. There is an instruction, the only thing that won't work is the Touch keypad.
I changed 3 registry entries:
- HKLM\Software\Tegic\eT9\AvailableLanguages
I deleted some of them, got "0109, 010C, 0113" typed in it.
- HKLM\Software\HTC\ezsip\Librarycount
I changed it to "5", then I deleted the entries: Library5 to Library14 (Just everything from 5 up)
- HKLM\Software\HTC\ezsip\Library4
Changed the value to "8"
Go to input and change the t9 setting to the empty bar, et voila you have dutch T9
Good luck!
ps Don't know why I changed the entries, have been messing around a lot with entries to get T9 working and this is an old habit with which I got my T9 to work
Hi, use the gullum keys and the attachted t9 dictionary.
OK, thanks for your replies. I would like to grade it down into steps. Could you help me in understanding. I put the steps down here and lookinig for verification.
1. Acquire a cab with dutch dictionary. Is this rom/device/keyboard specific?
2. Change the registry to look for Dutch language on the device
3. Change the library count to be able to show dutch language here
4. What is the value change in library 4 for???
Help is much appreciated
greek keyboard still not, working (I think Russian too). right ?
anyone knows somithing different?
OK, Im still not there. Based on tweaks & tricks topic, kartus thread above and the current settings on other languages I made the following registry changes / additions. I installed the Gullum Dutch language CAB and now I have Dutch language by choosing the empty option. How do I get the empty box to show Dutch instead of being empty. Instead of just fixing it for now I would really like to do it a 100%
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9]
Originally "AvailableLanguages"="0109,010C,0107,0110,010A"
Changed into "AvailableLanguages"="0109,010C,0107,0110,010A,0113"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\KdbFiles]
I added
"0A13"="spd.4x4.Dutch.kdb"
"0B13"="spd.5x4.Dutch.kdb"
"0C13"="spd.Lqwerty.Dutch.kdb"
"0D13"="spd.Pqwerty.Dutch.kdb"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\Language KeyboardIDMapping]
I added
"0113"="0913"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\LdbFiles]
I added
"0113"="NLlsUN_xt9.ldb"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\IME\KDbFiles]
I added
"0613"="hpd.5x5.Dutch.kdb"
[HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
I added
"Library5"=dword:00000008
Originally "LibraryCount"=dword:00000005
Changed into "LibraryCount"=dword:00000006
Click to expand...
Click to collapse
Can anybody help me get this working
Torpedojager said:
OK, Im still not there. Based on tweaks & tricks topic, kartus thread above and the current settings on other languages I made the following registry changes / additions. I installed the Gullum Dutch language CAB and now I have Dutch language by choosing the empty option. How do I get the empty box to show Dutch instead of being empty. Instead of just fixing it for now I would really like to do it a 100%
Can anybody help me get this working
Click to expand...
Click to collapse
I would like to know that too, how to get the line 'Dutch' in it. And also how to get the diamond keypad to work.
Why not wait for a dutch rom?
I know some people are working on it.
NeoS2007 said:
Why not wait for a dutch rom?
I know some people are working on it.
Click to expand...
Click to collapse
that's some good news!
thx
I Used WWE DCS rom, used the Nikki cab mentioned above with this settings and it works good in Dutch T9, I don't like dutch roms (-;
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9]
Originally "AvailableLanguages"="0109,010C,0107,0110,010A "
Changed into "AvailableLanguages"="0109,010C,0107,0110,010A,011 3"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\KdbFiles]
I added
"0A13"="spd.4x4.Dutch.kdb"
"0B13"="spd.5x4.Dutch.kdb"
"0C13"="spd.Lqwerty.Dutch.kdb"
"0D13"="spd.Pqwerty.Dutch.kdb"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\Language KeyboardIDMapping]
I added
"0113"="0913"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\LdbFiles]
I added
"0113"="NLlsUN_xt9.ldb"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\IME\KDbFiles]
I added
"0613"="hpd.5x5.Dutch.kdb"
[HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
I added
"Library5"=dword:00000008
Originally "LibraryCount"=dword:00000005
Changed into "LibraryCount"=dword:00000006
hello guys,
the hardware keyboard on my i-mate K-JAM is QWERTZ but when i updated its ROM version it became QWERTY i.e. when i press z on my keyboard it displays y
and the other symbols too have messed up
pls help!
thanks in advance!
-Evil Eye
Maybe you got a wrong language rom from the one you had, try installing your old rom again.
If not it may be a hardware issue, maybe have a look for the keyboard mappers if there are any and remap your keyboard keys back to the way they were maybe.
Hope this helps.
Exemike
i sorted it out by Resco Registry Editor
i changed the string values of locale file to 0407
all done
if anyone wants to know a step-by-step method, i would be happy to help
thanks
How can i install a german QwertZ Kezboard without de-installing mz new ROM?
Hey, i have tha same Problem. I installed a Kumara Garmin SKin for HTC Kaiser. But i dont wanna change this Rom to mz old one. - How can i change this qwerty-Keyboard back to mz old one and how can i make QWERTZ run on the Hardware-Keyboard too? And i want too ae, ue, oe, and so one in one Letter and of korse the ss in one LEtter. So, how can i make this run? Is there some adinn to install? And a seccond thing is, how can i set T9-Word-Recognitionto Germen? Thanks a lot of for your Replz!
Evil Eye said:
i sorted it out by Resco Registry Editor
i changed the string values of locale file to 0407
all done
if anyone wants to know a step-by-step method, i would be happy to help
thanks
Click to expand...
Click to collapse
unfortunately all those reg strings etc. doesnt work anymore. they (htc or ms) must have introduced a new reg string since built 20xxx.
I do have the same issue.