I want to upgrede to wm6.1 but I can't get BA int bootloader mode. I think that the power button. What can I do?
Bootloader
I Take it that you have read the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
this should help
Thanks. I'll read it.
Related
I already try with official rom, but my herald is still brick, i can not syncronize the herald with pc to run the official rom.
It is freeze in inicial boot with HTC logo.
help, please anyone....
Try turning the phone off and then turn it back on by holding the camera and communication button. This should bring you to the boot loader screen at which time you can tehter to your pc and run the OEM RUU. That should do the trick.
[Thanks, problem resolved.
German Vodafone Herald bricked
Hello,
could anyone here give me an Original Vodafone Rom to unbrick my Herald? It must not be WM6, WM5 would be sufficient. I only want my device to alive
Or is there another way to unbrick this phone? I only can get in bootloader modus and so i can not start the phone to CID unlock so that i can flash with another ROM like HTC Original.
So Have anyone a possibility to unbrick the phone or CID unlock from bootloader?
For any idea, thanks very much.
It happended when during copying rom from Pc to PDA and error at 3% everytime. What should I do
spl was unlocked (spl 1.11.0000)
Get the device into bootloader and flash the stock rom.
I had alomoust the same problem but i don`t know how i can get the device to bootloader mode to flash it. please help me
still can not correct the problems, any one can help me?
i try to flash original rom but it has the same error.
vladilol said:
I had alomoust the same problem but i don`t know how i can get the device to bootloader mode to flash it. please help me
Click to expand...
Click to collapse
First turn your PDA off.
Then keep the memo/voicerecorder button pressed while you turn on your PDA. It will automaticly go into bootloader mode. You can release the button then.
Please be advised that when you are using Windows Vista you will need different drivers then Microsoft offers you. You can find it further in this forum, aswell on this site:
http://http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
Don't forget to run USPL before flashing your rom.
btw, please disable hibernate and screensaver. When enabled it can fail your update.
Hope this will work. It did for me.
Hi guys, you have been a great help to me so far, but I just can't find anythign to help me with this now. I have a hermes100 with WM6 and i just flashed the radio to 1.54.07 and it gave me an option for hardSPL and said that it was recommended so i investigated and found the upgrade for it.
I ran the wrapper file and it goes to the stage where it puts my hermes into flash mode but it displays "spl1.09" on the screen yet when push the ok and power keys during reset it shows "spl2.03"
it goes through the screens until it puts my phone into flash mode and it says it is trying to read my device then i get error code (260) that it isnt connected. Anyone know a way to fix this?
Use sd card method, page 116 on here: http://forum.xda-developers.com/showthread.php?t=296722
Hope this helps...Cheers...
okay, i tried the sd card method and it does the same thing. after it gets to the bootloader screen i just sits there with
"HERM100
IPL-SSPL by des
HERM 100
SPL-109.ds
serial"
okay, nevermind, i just had to reinstall the drivers for when i was in bootloader mode. I got it to work, thank you for you help.
cheers :-D
No problem, now you should be able to flash any hermes rom to your hearts content with the knowledge you have a safety net if something does(and probably will, as you'll find flashing addictive, sooner or later) go wrong. Pleae remember though that Hard SPL ISN'T a guarantee that you will be able to fix you phone, it just makes it easier when something goes wrong... Cheers....and happy flashing...
samterry1234 said:
okay, nevermind, i just had to reinstall the drivers for when i was in bootloader mode. I got it to work, thank you for you help.
cheers :-D
Click to expand...
Click to collapse
how did you do this?
Dear All,
Help Required,I m Trying To Load Hard SPL From Diamond.After Load My
HTC Juno is dead & Couldnot Start in Bootloader Mode.
Please Help Me To BootLoading Again.............................
I'm sorry, but I don't think it's possible. You're not supposed to use the HardSPL from one device to the other because it is meant for that specific device and only that specific device. You probably have bricked it.
The only thing you can try is to attempt to start the bootloader mode. Hold down the camera button while turning on the Juno and keep holding it after you've released the power button. If the 3 color bootloader screen comes up, you can flash the official T-Mobile ROM, but I don't think that's possible because you tried loading a Touch Diamond SPL onto it.
Thanx ND4SPD,
I Tried To Enter Bootloader Mode But Failed.
Any Advice will be appreciated.
you have to try JTAG mode
tramuyo,
Thanx For Reply.
What is JTAG? How I Use It? Please?????????????????
Hello,
I wanted to upgrade my operating system on my XDA II but to do that i need to use the power button but on my phone the button is broken, is there any way to get to the serial screen such as a freeware program i can run or another way of doing it?
There is a video somewhere here in WM5 or WM6 to show you how to upgrade.
It´s here:http://forum.xda-developers.com/showthread.php?t=370752
Nice Little Tool For Entering BootLoader
Ok give this a Try it was Originally for Polaris but it works with my prophet so i am assuming it works with other htc devices ,Install the cab then run Enter BootLoader from programs\tools folder (no button pressing needed)
thkz it wrks great
help...
i cant enter the bootloader mode... i think my hima is brick when i try to enter to bootloader mode nothings happen(power dpad reset)... but when i do a hard reset(power + reset) its a whitescreen and i cant see anything... do you have any adie what to do mith my hima.. please need help... thanks