Database Users

3300 dont start anymore

ive got a htp 3300 from movistar spain and i allready got it unlocked, yesterday i put the wm6 english on it and today y tried to put
PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap, now
i can see only the white htc screen
IPL 3.007.001
SPL 3.07.0000
GSM 02.69.90
OS 1.28.0.0
the phone dont start anymore
y need helpe please

Can you get in to the bootloader?
If you do then you can put an original rom back. If you don't then send it to the service.
An unlocked device is out of warranty so be prepared to pay for the service.
Go to wiki of Artemis there you can find the method to get in to the bootloader.
Goof luck! << you need that.

you meen push the record button and reset in the same time???
i tried this befor but never go in bootloader modus maybe i make something wrong pleas help me

As of this http://forum.xda-developers.com/showthread.php?t=308242#1 threath of meschle states your device is a brik.
I'm sorry to tell you that.
meschle said:
Do Not flash your Artemis with a different carrier/cooked Rom without cid unlocking
--------------------------------------------------------------------------------
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)
or here http://www.imei-check.com/c3unlock.php (costs though)
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112...0_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219...0_WWE_SHIP.rar
O2 Orbit WM5 WWE factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
O2 Orbit WM6 WWE factory rom downloadable here http://rapidshare.com/files/46377862....90_Shi p.exe
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Click to expand...
Click to collapse

movilstore said:
ive got a htp 3300 from movistar spain and i allready got it unlocked, yesterday i put the wm6 english on it and today y tried to put
PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap, now
i can see only the white htc screen
IPL 3.007.001
SPL 3.07.0000
GSM 02.69.90
OS 1.28.0.0
the phone dont start anymore
y need helpe please
Click to expand...
Click to collapse
i had the same problem and took me 3 days to fix it. so maybe this will work for you too !
first take out the battery for 30 min then push the reset button and put the battery back and turn on the device. if this not working. try to start bootloader by pressing and holding the record button and on/off button and push the reset butoon in the same time but keep pressing the record button and on/off button till a colored screen shows up??? sometimes it doesn't appear at the first time so just keep trying .
if you have bootloader you can reflash a rom. but you need to format your memorystick first to fat on your pc then put the image rom (nbh file) and rename it to Arteimg.nbh !! i used OrbitO2UK image.

My wizard died

Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english

which is your device,post full data of your phone,IPL/SPL...? Make...?
As you say you installed through Shelltool,is it a G4 DOC chip version ?
You say it's stuck at the splash screen with ipl/spl and gsm version,which splash screen,is it OS (Rom) initial splash screen or a Bootloaders (Multicolored) screen ?
Secondly ,try to get it into bootloaders (multicolor) screen,if it gets into bootloaders,connect it to PC via usb cable,check small usb appears at the bottom of the bootloader mode in the phone,if it does,than flash a carrier's official Rom to recover back to it's default status.
Good luck

Try the Button's ROM (which is in Wizard Upgrading subforum). Then unlock it again (It may be causd by a fake CID unlock when you try to unlock when IPL/SPL is 2.xx)

My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.

alldoe said:
My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.
Click to expand...
Click to collapse
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.

luoluomeng said:
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.
Click to expand...
Click to collapse
Hello! I have CID unlocked. When I install Button ROM my IPL and SPL is the same (1.01). Every RUU works but It still frozen. 2 Days ago i found on other forum this advice:
INSTRUCTION :
1. miniSD - formated in PC - FAT format (now FAT32 !)
2. Wizard On and Bootloader (press reset and keep photo button let go reset) 3 color display. Put in card to Wizard.
3. Connect USB - PCC to PC
4. Launch MTTY 1.42 (my ver.) with USB connection
5. Write command - r2sd os end press enter
6. Program it will record OS on miniSD
7. After recording make Hard Reset or turn on Bootloader
8. On Display should be written - Format partition ?? (5 sec.) - to confirm press Voice dial button. If inscription it will disappear repeat point 7.
9. If Format partition successful wait OS is write. Done.
10. Draw out miniSD
11. Make Hard Reset
12. Enter in bootloader
13. FOR NON CID WIZARD - Flashing Wizard RUU (must be proper version) - ERROR 300 is bad RUU ERROR 266 turn off Wizard and turn on connect to PC
14. With CID (for example CID G4) seek forum for flashing Wizard with CID G4
My Wizard it lives
Click to expand...
Click to collapse
I was carry out all command step by step, and after flashing proper version Orange ROM my Wizard woken up, but today my Wizard get stuck again and now this way don't work, and I have to find a new method to rescue my PDA.

My Wizard woke up! I find ERA PL ROM (RUU_Prodigy_3829_382130_027111_TMO_PL_PLK_Ship) which flash excellent and working, but now I have a new problem. I can install other ROM after that but none of them work, every stucked at Splashscreen like before.I need to find some WM6 ROM which will working? Someone have some suggestion?

alldoe said:
Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english
Click to expand...
Click to collapse
i have the same proplem but i have a g4 wizard and it's not cidlocked tell me plz what to do plzzzzzzzzzzzz :'(

HTC Herald,P4350 ERROR [300] INVALID UPDATE TOOL.

I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.

canonyang rulez)))
hate this numbers 1.08.001, as in "lost" film
DONT USE *SPL* (uspl,hardspl,jspl,another) IF YOUR SPL UNDER 4.00.0000

DrMobile said:
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
Click to expand...
Click to collapse
Send your phone to HTC Service Center, Same thing happend to me and they
changed it under warranty.

In my country there is no service center for HTC.
and phone is come from norway
I need solution. otherwise customer will eat me.
Br.
A. Wahab

Hi DrMobile,
Have you solved your issue? I have the same issue as you...
Please help by sharing with us the solution
Thanks,
Lamnl

same in my mobile error 300
i am still trying the rom without any success. please help

i have the same problem. my phone is showing bootloader , i have ipl/spl 1.08.0001 i tried anythin but nothing worked.
i hope there is a solution with our phones, and someone around here will take a look to our problem.

stuck in bootloader
i have the same problem.
eror 300
pls help

me 2 plz any one can help me 2 plzzzzzzzzzzzzzzzzzzzzzzzz

"those with a SPL lower than 4.0.0.0 or something like that gets bricked. I just wanted to get this first post edited to reflect that so that people don't keep bricking their phones."
(Moderator: whether this is accurate or not I do not know - but use your own discretion)2nd Jan 2008
from another topic, send them for repair

Try this:
http://forum.xda-developers.com/showthread.php?t=343450&page=2

Warranty got back my device back to life
Hi I bricked my device a few days back and tried all the stuff to bring it back to lifee but in vain... I finally gave up my trials and approached the service centre. They just replaced the motherboard inside and luckily everything seems fine now. They hadn't charged me anything as it was within warranty. Anyone in India if you need service centre address..
http://www.asia.htc.com/asia/in/support_sc.html
Though this site says HTC, I got my Dopod C800 serviced there...
Very few questions and cool guys.
Regards,
Murali

Now I think that the reason of non flashing, even with official RUU, could be corrupted CID-block after using HardSPL on devices with low IPL/SPL. I've read thread about similar problem with Wizard. The question is: how to restore the CID block in our bricked devices? I'm not even sure if this theory with CID-block is a reason...
What do you think about such a trick:
- Run RUU on someone's working HTC device but only until the moment, when it wants you to click the last button to finally proceed with flashing. (This step is to let RUU to know that this RUU is correctly dedicated to our device). It's a kind of fake for RUU, cause our CID doesn't match the CID of ROM included in RUU.
- Next disconnect working device from the USB and connect your bricked device with launched bootloader mode
- Next click the final button to launch flashing in RUU application. If the process of CID matching was done before this step, the flasher should start and let us flash our bricked device. But I'm sceptic to this solution. If it was so trivial, everyone could flash his device with different ROMs so easy...
I can't try this trick cause I don't have working HTC. What do you think? Will it work or not?
DrMobile said:
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
Click to expand...
Click to collapse

D'you mean
working Herald or any HTC?
I have the same prob

I'm thinking about working device, exactly the same as this bricked one - in this case Herald. But all of this is only a theory. I don't have enough knowledge about the RUU flashing process.
My another idea is to swap only ROMUpdateUtility.exe, rapitool.exe and EnterBootloader.exe files from official RUU dedicated to your bricked device, with different versions of these files from another HTC devices just to test if it helps to recognize our bricked devices by RUU. Maybe the problem is wrong version of these files? But which versions are correct?
I'm just trying to find a solution to unbrick our f.....g Heralds . I know this is only a matter of time and soon or later we will know what to do. Moreover I believe that there are people, even on this forum, who know how to unbrick our Heralds but some of them don't want to do us a favour. I know what I'm talking about...
GenePr said:
D'you mean
working Herald or any HTC?
I have the same prob
Click to expand...
Click to collapse

i have the same problem.
error 300
pleas help

have the same error...300
but i can manage via mtty using bootloader commands
when i put password <Bs...> the mtty shows last thing ive running and phone shows a progress bar with 0% (like.. what uve been doing last time?)
i think we can manage it via bootloader commands
i know.. i know
(at least our devices run bootloader mode, is recoverable!)
it can be flashed by SD? how?

Welcome to the club...
As far as I know, SD flashing doesn't work because of the CID-lock.
tramuyo said:
have the same error...300
but i can manage via mtty using bootloader commands
when i put password <Bs...> the mtty shows last thing ive running and phone shows a progress bar with 0% (like.. what uve been doing last time?)
i think we can manage it via bootloader commands
i know.. i know
(at least our devices run bootloader mode, is recoverable!)
it can be flashed by SD? how?
Click to expand...
Click to collapse

no, it cant be possible! im not goin to pay HTC Herald
there's a solution, a HOPE... (u try to flash with original flashfile?)

I thinks the solution is to unlock CID from bootloader mode, for old models i did so, but how to unlock Herald's CID

SPV M600 freeeze

hi,
I recently buy a SPV M600 and this was working fine! When a try unlock that for put a difrent company sim that never start up again! Now the item freeze on first screen, where that show the IPL,SPL,OS and GSM versions!
Anyone have solution for this problem? I try update the rom, for a RUU but the problem still .
Best regards
gats

Have you tried a Hard Reset? (Hold the Comm Manager button and the Camera button and soft reset)

yes, i try a hard reset, phone restart and freeze again!!
I think about it , and the phone are Sim locked and CID locked, is for that reason he freeze?

Is it a G3 device or a G4 device?
The SIM Lock shouldn't cause this, but try taking the SIM out and seeing what happens.

is a G4 model.
Sim card was always out, because it isn't unlock to put my sim.
Nobody can hep me? I upgrade the rom for the original of orange in same language but the phone continue freezing at start!
I don't no what i can do more!

Normally, you should SIM unlock before flashing the ROM...
What brand is the device?

I think i found the problem! I didn't flash the rom before updating and didn't unlock CID. I am thinking now, how to repair the phone now!
So, the phone are sim locked and CID locked, i ll CID unlocking with hardspl, but i ll not can copying the necessery files into pda directory, like this said on "Rom flashing for dummies" on Wiki!! So can i flashing the rom from BootLoader?
The phone is in used condition, but it all functionally becuase i work with that before update the rom and have this problem!
Best Regards
Gats

If it's in/can get to bootloader, it should be possible to flash a WM5 NVID ROM. from there, you can HardSPL, SIM unlo ck and then flash a New ROM.

If it's in/can get to bootloader, it should be possible to flash a WM5 NVID ROM. from there, you can HardSPL, SIM unlo c
ck and then flash a New ROM.

artemis dead when flashing cid unlock at 99%

am using artemis p3300 but when i flashing uspl at 99% it shows upgrade failure now pda will be dead i cant go bootscreen too is any solution to back to boot screen? help me

Hi,
what do you mean by bootscreen? Windows boot screen or Artemis' bootloader (tri-color screen)? First of all I would try a hard reset, here's how to: http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
Did you try to flash USPL with this? http://forum.xda-developers.com/showthread.php?t=311403
You should at least be able to enter bootloader..here's an interesting thread:
http://forum.xda-developers.com/showthread.php?t=306904 .
Sorry I can't help more, i never experienced a similiar problem but I'm really curious to see it solved, waiting for some guru to help

sorry sir if i put battery inside pda will be start heating i cant switch to tri colour bootscreen havent money to buy a another pda am going to mad and am a looser.

Use MTTY to reset flash, the install the official rom for your device.

device never switched on is there any way to switching power on my device htc artemis p3300

bricked artemis goes mtty to reset the flash please give link here
how can i mtty to reset my bricked artemis please give me the link to download the file.