Anyone replaced their own Jam lcd/touchscreen? I'm thinking of getting a replacement screen off ebay for $100. It doesn't look all that difficult, but I want to make sure it's not harder than it seems to do a self-replacement.
nvrnuff said:
Anyone replaced their own Jam lcd/touchscreen? I'm thinking of getting a replacement screen off ebay for $100. It doesn't look all that difficult, but I want to make sure it's not harder than it seems to do a self-replacement.
Click to expand...
Click to collapse
Hi nvrnuff,
Opps, I didn't notice there is a replacment screen and already order a Eten M600. Can you please reply back yr end result if you will buy the replacement screen.
Hey nvrnuff,
Are U breaking the LCD (the display) or the DIGITIZER GLASSTOP(the touchscreen sensor) like me. I just found out they are 2 seperate things from http://forum.xda-developers.com/viewtopic.php?t=51395&highlight=lcd after research
Answering my own question:
Jack, it doesn't matter with the Jam. They're all one assembly. Even PPCtechs can't replace only one or the other on this device; they always replace the whole assembly, LCD and touchscreen both. But I know what you mean, and yes it is possible to have a working LCD and broken touch or vice versa.
Second, I recently replaced my Jam housing and found that the LCD/touchscreen assembly is remarkably easy to replace IF YOU FEEL COMFORTABLE WITH DISASSEMBLING THE JAM. For more information on that, read the "Jam housing" thread. I posted there about that whole process on page 3.
Hey there,
Has anyone here replaced a dead LCD screen (not digitizer)? IF you have could you tell me the symptoms you were getting. I'm going to try to replace mine but I'd like to be sure that it's the screen causing the problem and not something else.
Thanks!
GG
also, could you let me know where you got your LCD from?
You can get them from ebay for about $100, that all i know of though.
Google lms283gf01 and see if you can find some
Actually, I picked one up on eBay for $28. Yes, that was a new LCD, not the digitizer. It even came with the tools to open the phone. There are good instructions around for a complete dis-assemble and it was relatively painless.
I broke the original LCD, so there was no question whether it "failed" or not.
Well I can't see any cracks or anything in the LCD. I think I'm just going to get a Diamond. Unfortunately, no NFSFAN...
GG
lcd screen
Hey, you wanna get rid of your broken vogue? [email protected]. get back with me if you're interested. Or maybe I can advise you on how to repair your vogue...I've done several myself.
Good luck.
Hi,
I'm new to this site, if I wrote something wrong, please have a mercy .
Ok, my thing is that I have HTC Blackstone and I broke its frontal cover (known as digitizer too ). I ordered this part prom ebay, and today I got it. Nice, new, tools included. But...then I started to dismember the phone, and at the end I discovered that its display is glued or something like that to frontal cover. The question is: How can I change this digitizer? Because with LCD everything is fine, I need to change just this digitizer.
Hope to hear some tips.
Thank you all in advance .
Checked the service manual in the wiki?
I tried, but only thing that I found was some kind of service manual for dismembering the phone up to LCD, but there isn't any info on how to change LCD (and I think that changing digitizer could be similar to changing LCD). I don't believe that HTC didn't include such an option to change LCD or digitizer, especially if digitizer can be bought separately.
Maybe this can help then.
http://vimeo.com/6892707
I've not watched it all the way through but hopefully it might help.
big thanks, but this guy in video is stuck in the same situation as me . I'll try to contact my local HTC service center, maybe they'll have some solution .
Sorry then don't know. Good luck.
worldendswithyou said:
big thanks, but this guy in video is stuck in the same situation as me . I'll try to contact my local HTC service center, maybe they'll have some solution .
Click to expand...
Click to collapse
I very much doubt they'll give you any info on taking the HD apart, they'll surely want you to send it in for repair!?
That said I would love to have a go at replacing the entire outer casing as mine is looking tatty now. Can you send me a link to the ebay seller that you got your parts from and maybe I'll have a go at it myself
EDIT: Perhaps it would be better to get a screen and ditigitzer as one unit? LCD & Digitizer
EDIT: Have you managed to get the screen and digitzer out of the front part of the case, I guess it's then easier to split the screen and digitizer. See this ebay item for pics, perhaps it makes a bit more sense when you look at it Full Housing Kit
worldendswithyou said:
Hi,
I'm new to this site, if I wrote something wrong, please have a mercy .
Ok, my thing is that I have HTC Blackstone and I broke its frontal cover (known as digitizer too ). I ordered this part prom ebay, and today I got it. Nice, new, tools included. But...then I started to dismember the phone, and at the end I discovered that its display is glued or something like that to frontal cover. The question is: How can I change this digitizer? Because with LCD everything is fine, I need to change just this digitizer.
Hope to hear some tips.
Thank you all in advance .
Click to expand...
Click to collapse
dude to save u time money and a head ache just call htc i tryed the same thing ur doing and i failed and even made it worst the touch hd lcd consist of 4 different layers of independent screens to combine into one and one of those screens that makes ur lcd go black is almost paper thin and will crack it u try to pry them apart for a new screen and body its only 150 tops i paid 113 i hav an u.k. device and i live in the usa i explained to them what i did i foud out that the u.k. devices hav a 28month warrenty on it call them they will say it will be around 300 until they get the device and see what it needs also i told them that i moded my rom and wen i got it back they had put back the oem rom
Unfortunately my screen broke, the LCD is working fine, and recognizes touches.
Is it possible to change only the glass and digitizer? Eg
I'm afraid of LCD panels from eBay. The service said that warranty is void at all events (even if they repair it).
I'm currently in the same situation. Any update on your phone's screen?
A local repair shop can't fix it unless I buy a panel myself and let them fix it for me. I want to know what I need if the glass is broken, but touches and LCD are fine: just glass or a complete screen replacement, like this one: https://www.aliexpress.com/item/Rau...Panel-Replacement-for-Xiaomi/32835465822.html .
I will order a complete LCD panel with frame and try to replace myself. But I don't know if they are the same quality as original.
erikieperikie said:
I'm currently in the same situation. Any update on your phone's screen?
A local repair shop can't fix it unless I buy a panel myself and let them fix it for me. I want to know what I need if the glass is broken, but touches and LCD are fine: just glass or a complete screen replacement, like this one: https://www.aliexpress.com/item/Rau...Panel-Replacement-for-Xiaomi/32835465822.html .
Click to expand...
Click to collapse
Let us know when you do! Please also specify which replacement you bought. It's a good idea to document these things, because in the coming years many more people will break their screens, unfortunately, but we can help them finding out what screens are worth buying.
I'm especially interested in touch performance and LCD similarity to the original. If you could pay attention to those properties and comment on them when you know, that would be really helpful.
Never try replacing one yourself, no matter how tempting and easy it looks on youtube videos, without proper gears and experience, you will end up damaging the whole panel. I know because I tried and failed myself and ended up buying the whole front panel with the LCD.
It will be much cheaper to buy it off ebay and let a experienced guy do it.
Did you tried with LCD+frame kit? It looks much easier that way. What happened exactly?
billysam said:
Never try replacing one yourself, no matter how tempting and easy it looks on youtube videos, without proper gears and experience, you will end up damaging the whole panel. I know because I tried and failed myself and ended up buying the whole front panel with the LCD.
It will be much cheaper to buy it off ebay and let a experienced guy do it.
Click to expand...
Click to collapse
Sec0nd said:
Did you tried with LCD+frame kit? It looks much easier that way. What happened exactly?
Click to expand...
Click to collapse
I was trying the glass with digitizer which was pretty much cheap, which needs to be removed with proper gears and lot of patience with a heat gun(I have seen local shop guys doing it without them with ease), It was an old samsung s3 which I kept to experiment on, ended up buying the whole front assembly which I did installed successfully(made me feel a lot better). That looks easy and there is less of chance of any breaking, unless you are very careful in removing all the tiniest sensors and wire and put them accordingly, but then you have to carefully pick the whole assembly there are plenty of low quality ones around, where you might get one that gives issues. for instance on Samsung s3 it was an original amoled display. but I got one that was an LCD panel display and there were issues where brightness sensor didn't worked at all.
Your best bet would be an original LCD+frame kit, I don't know if you really can get one off ebay.
So my three advices.
1. try to get only the glass with digitizer off ebay(If your Display works), then let a local expert change it. much cheaper and let you avoid getting a low quality LCD panel.
2. If it's your first time, I would suggest doing it on a cheaper phone to test your skills, I wouldn't recommend doing it for first timers who have no experience of doing it. there is high possibility that you might break a sensor or a wire.
3. if you want to go ahead with a whole new kit from ebay, make sure you check it without removing any sticker, and connect that display with the motherboard and see if the display is really good and make sure you check the brightness and touch. only if you are satisfied then go ahead, or return the product.
Thank you for the advices!
I couldn't find anybody, who can replace only the glass and digitizer.
The screen and digitizer work fine, only the glass is broken.
billysam said:
I was trying the glass with digitizer which was pretty much cheap, which needs to be removed with proper gears and lot of patience with a heat gun(I have seen local shop guys doing it without them with ease), It was an old samsung s3 which I kept to experiment on, ended up buying the whole front assembly which I did installed successfully(made me feel a lot better). That looks easy and there is less of chance of any breaking, unless you are very careful in removing all the tiniest sensors and wire and put them accordingly, but then you have to carefully pick the whole assembly there are plenty of low quality ones around, where you might get one that gives issues. for instance on Samsung s3 it was an original amoled display. but I got one that was an LCD panel display and there were issues where brightness sensor didn't worked at all.
Your best bet would be an original LCD+frame kit, I don't know if you really can get one off ebay.
So my three advices.
1. try to get only the glass with digitizer off ebay(If your Display works), then let a local expert change it. much cheaper and let you avoid getting a low quality LCD panel.
2. If it's your first time, I would suggest doing it on a cheaper phone to test your skills, I wouldn't recommend doing it for first timers who have no experience of doing it. there is high possibility that you might break a sensor or a wire.
3. if you want to go ahead with a whole new kit from ebay, make sure you check it without removing any sticker, and connect that display with the motherboard and see if the display is really good and make sure you check the brightness and touch. only if you are satisfied then go ahead, or return the product.
Click to expand...
Click to collapse
Sec0nd said:
Thank you for the advices!
I couldn't find anybody, who can replace only the glass and digitizer.
The screen and digitizer work fine, only the glass is broken.
Click to expand...
Click to collapse
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
I found several glass with digitizer on eBay: https://www.ebay.com/sch/i.html?_fr...RS0&_nkw=Xiaomi+A1+touchscreen+glass&_sacat=0
billysam said:
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
Click to expand...
Click to collapse
billysam said:
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
Click to expand...
Click to collapse
I love advices like that.U r smart.
I've also cracked my screen.... happened yesterday when I accidentally dropped it on concrete. Touch is working fine, only glass is broken.
So would be buying only the digitizer like this one: goo.gl/ZDPoFd do its job if I let it do at the local repair shop or buy the whole LCD as mentioned above?
Roykooiman said:
I've also cracked my screen.... happened yesterday when I accidentally dropped it on concrete. Touch is working fine, only glass is broken.
So would be buying only the digitizer like this one: goo.gl/ZDPoFd do its job if I let it do at the local repair shop or buy the whole LCD as mentioned above?
Click to expand...
Click to collapse
You're going to need to ask your local repair shop. Some shops will be able to replace the digitzers, others only do the full LCD assembly. Again others will not even accept repairs where you bring in the parts, they'll source the parts themselves.
Localhorst86 said:
You're going to need to ask your local repair shop. Some shops will be able to replace the digitzers, others only do the full LCD assembly. Again others will not even accept repairs where you bring in the parts, they'll source the parts themselves.
Click to expand...
Click to collapse
I've contacted a local repair shop and said they couldn't do only the digitizer, but they can do the whole LCD repair which will cost me 25 euro. Now I have to find the right one..... as you have so much variant on Ebay and Alie. U have a suggestion on which one to choose?
My MI A1 display is craked .but display is working and phone functions are working .just I ask you if I using the craked display for long time is it problem come.phone sold 3 days ago so I cannot want to repair the lcd. .Plz advice
I bought this one: https://www.aliexpress.com/item/Ori...izer-Display-For-Xiaomi-MiA1/32831902856.html
I let a local phone repair shop do the repair for me. They did a great job. The screen itself is also great. I think it could be an original, as I can't tell any difference. The colours seem the same, it measures up to 10 simultaneous touches (like the original), the performance feels identical. I recommend this screen! I've also left a review with pictures on Ali Express, but it's still being processed.
I ordered a white screen for my black Mi A1, so now I have a stormtrooper! (or panda, whatever you want...)
Screen plus repair in total about €60, well worth it IMO. It's quite a fraction of the original purchase price, but hey, I shouldn't have dropped the phone after a month. I've also ordered a plain black back cover to help me better grip the device.
erikieperikie said:
I bought this one: https://www.aliexpress.com/item/Ori...izer-Display-For-Xiaomi-MiA1/32831902856.html
I let a local phone repair shop do the repair for me. They did a great job. The screen itself is also great. I think it could be an original, as I can't tell any difference. The colours seem the same, it measures up to 10 simultaneous touches (like the original), the performance feels identical. I recommend this screen! I've also left a review with pictures on Ali Express, but it's still being processed.
I ordered a white screen for my black Mi A1, so now I have a stormtrooper! (or panda, whatever you want...)
Screen plus repair in total about €60, well worth it IMO. It's quite a fraction of the original purchase price, but hey, I shouldn't have dropped the phone after a month. I've also ordered a plain black back cover to help me better grip the device.
Click to expand...
Click to collapse
Do buttons light work ?
NITRO_100 said:
Do buttons light work ?
Click to expand...
Click to collapse
Yes! See attached images. The LED also works, but isn't on in the pictures.
erikieperikie said:
Yes! See attached images. The LED also works, but isn't on in the pictures.
Click to expand...
Click to collapse
You are lucky then, because it's common for Xiaomi that the buttons won't lite when replacing screen.
NITRO_100 said:
You are lucky then, because it's common for Xiaomi that the buttons won't lite when replacing screen.
Click to expand...
Click to collapse
I didn't know that! It wouldn't have been bad, because I don't like the button backlight at all: it's on for too short, it's too bright, it's not like I can't find the buttons and it's not like I don't know what functions the buttons have... I hope we can turn it down or off in the stock ROM in the future!