Ive been looking around, i couldn't really find anything.
Is there anyway that i can get my kaiser to sort of work as my i trip and play mp3's via my phone into my stereo?
I tried taking a mini usb -> 3.5mm jack and then putting it right in my stereo, but it didnt work.
Any ideas?!
.... Look Here
However you don't need a mini usb cable, but an HTC-Ext USB cable, infact audio contacts are in the lowerside of the female jack of the pda, so a normal miniusb (type A & B) doesn't work.
if you have brought a T adapter or a "3 in 1 adapter": charge + Audio +, if "3 in one adapter", a 3.5mm audio jack jack,
I hope that
a) your stereo doesn't work/have AUX-in/isn't the AUX-in activated on the stereo (3 in 1 adapter)
b) you have missed some contact (T adapter)
c) your adapter is weak
.. i have a T adapter, and have cutted my old hermes original earphones (see the pics into the topic linked before..), i Navigate with full sound on my stereo, and play music in the same time.
If your USB-to-miniplug adapter works with headphones, then it should work with the Aux In on the car stereo. As suggested in the reply above, maybe there is some glitch in the chain. Check the car stereo settings, and there isn't some issue with the cable, jack, etc. (perhaps try another device like an iPod and see if that works?)
If you still want to try a iTrip-type FM transmitter. Then one like this should work:
http://www.griffintechnology.com/products/itripautouniversalplus
Related
Hi all
I have a MDA compact which I wish to connect to my car stereo as a handsfree unit. I have an auxiliary input for my stereo.
Is it possible just to purchase a 2.5 to 3.5mm lead for this? I have a gut feeling the mic won't work - please help? Is it possible to buy such a lead with a built in mic?
Thanks
Carl
Hi, I used to have a XDAII which I connected to the auxillary port on my car stereo, just like you suggest. It worked perfectly. When using the phone, the caller's voice woudl come out of the car speakers and the mic was powerful enough to pick up my voice even though the unit was mounted on my windscreen.
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact. Sorry couldn't offer more advice on your particular device, but I hope my experiences help.
monster said:
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact.
Click to expand...
Click to collapse
I do have the same setup. I can confirm U the mic still work after U plug in the adapter but I normally use a BT headset when I am in the car.
OK, so I assume that if I purchase a 2.5mm to 3.5mm lead, the mic should work?
carlreader said:
OK, so I assume that if I purchase a 2.5mm to 3.5mm lead, the mic should work?
Click to expand...
Click to collapse
Yes. 8)
OK - did some work on this.
I decided to cut the earplugs off of the supplied headset, and attach a 3.5mm socket.
I now have a custom XDA mini lead
All works, however volume from car stereo speakers is extremely low. Any ideas? (Yes, I have checked car volume, phone volume and headphone volume!)
Cheers
Carl
jackleung said:
monster said:
Unfortuntely, both the Wizard and the Exec automatically disable the mic when you plug into the headphone socket. Not sure about the MDA comact.
Click to expand...
Click to collapse
I do have the same setup. I can confirm U the mic still work after U plug in the adapter but I normally use a BT headset when I am in the car.
Click to expand...
Click to collapse
Hi Jackleung, my mic is being diabled, and i am beginning to think that I may not have the right connector. I have a standard 3.5mm connecting the exec. Can you let me know how you have wired your device with the type of connector? You may be able to solve a longstanding problem of mine.
Thanks in advance.
I found my mic was cancelled with the Mini, hence the custom cable.
hope this helps!
monster said:
Hi Jackleung, my mic is being diabled, and i am beginning to think that I may not have the right connector. I have a standard 3.5mm connecting the exec. Can you let me know how you have wired your device with the type of connector? You may be able to solve a longstanding problem of mine.
Thanks in advance.
Click to expand...
Click to collapse
I think my adapter is just a standard 2.5mm to 3.5mm converter. I tried 2 different adapter (one from Radio shack and the other one from ebay: http://cgi.ebay.com/USB-CABLE-headp...ryZ15040QQssPageNameZWD1VQQrdZ1QQcmdZViewItem)
Both are working for me (I will try again today and confirm U tomorrow), therefore I think yr problem is in the exec hardware itself.
To Carl,
Yr setup will not work since yr supplied headset adapter has at least 4 connection on the plug compare to 3 on the standard one. The extra connection is for the mic. If U cut the wire like this:
<---- X --- mic+volumn control ------ ear plugs
Then U can no longer use the mic w/ the custom wire. But if U:
<------- mic+volumn control -- X ---- ear plugs
then the mic on yr mic+volumn control will pick up the voice
hi jackleung
Thanks for the reply - the lead was cut after the mic but before the earphones.
This was because a standard lead with a 2.5 / 3.5mm adaptor didnt work.
My only issue now is the low volume!
Cheers
Carl
I tried it on my Imate Jam again. My mic on the Jam still works (eg: Voice Command via Cyberon Voice Dial. So do phone conversation) even I use my 2.5mm/3.5mm adapter to connection it to my car stereo.
Hi,
I did the same for me and a friend of mine with a Univer..er - Jasjar and connected this to an FM transmitter - We have excellent sound quality, volume and the you can still answer calls by pressing the Mic Button
Frikkie
(If you are gonna be late - dont rush, else someone else and YOU will be cross)
check connections?
I have done exactly what you did, put a 3.5mm socket on the end of the included handsfree cable.. volume is fine, and i regularly connect it to the aux in the car, and multiple sets of headphone/speakers...
The best suggestion to your volume problem is to try again.. i know i had issue with the stereo channels getting screwed up (and even combined at one point) and it was just trial and error getting the connections clean..
You have to ensure that both the shaft and tip connectors on the socket are grounded to the shared ground on the circuit board.. otherwise the audio will probably be less than perfect.. check for dodgy soldering/connection.. coz i can assure you that your theory does work!
Dan
There is another topic on this here.
The person from there uses:
http://www.expansys-usa.com/product.asp?code=PPCPADPT02
which has two 3.5mm plugs.
Description: It has a 2.5mm plug at one end (this plugs into the PocketPC) and two 3.5mm sockets at the other end (into which you plug your 3.5mm headset or headphones).
My question was: could I put a standard 3.5 car kit mic into this 3.5 headset jack (the one with the mic)? Would the mic work if I plug it into a headset jack?
I assume the other one (headphones = stereo only) I will plug it directly into my car auxiliary via a 3.5mm to RCA cable, right?
I have an Audi A3, which has an AUX port to connect an MP3 player, so that it plays over the car radio/speakers. (FYI: The AUX port is wired into the CD changer of the Car radio).
I was wondering if a cable exists that can connect to the VARIO (tilt) into aux, so when the phone rings it plays through the speakers. Im hoping that the mic on the phone is good enough to pick up my voice which it sits in the cradle.
I could also use this link up to play mp3s on the tilt as well.
Get a 11-pin miniUSB male to 3.5mm male cable. Search on ebay or google.
you need something like this
http://www.pocketpctechs.com/main~unit~ATT_Tilt-974~area~view_cart~item~LSP-DUOPRO01.htm
fyi, if you just get a mini usb to 3.5mm plug, the mic on the phone will mute itself once you plug that 3.5mm adapter plug, so you can hear the caller but no matter how loud you scream, the other party won't be able to hear you.
I had the same idea before, tested it and it didn't work. That's why I had to order this adapter from ppctech.
Thanks for the replies, both are very helpful.
Heya,
Currently I have a 3 way splitter HTCusb -> Power (miniusb) | Audio (3.5mm) | HTC Headset Connection (HTCusb)
What I need is a microphone only 'headset' to go in the headset socket, as the audio is allready being passed to my car's speakers via the 3.5 jack.
Does anyone know if/where somthing like this exists? or should i buy a cheap headset and splice the earphones off?
Also anyone else find the fuze is unable to gain positive charge whilst on and connected to a 12v ciggaret adaptor, it still drains but at a slower rate, but I do not have an offical charger, which may be the problem.
+1
I also have my audio sent to my car speakers. But since the phone thinks I have a headset attached, the phone microphone is disabled. So when it rings, I have to undock it from the cradle and stick it to my ear. I'd love to have just a microphone mounted near the visor. Anyone know where I can find one?
Wouldn't this do as a workaround?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=169481
Plug into the HTC headset connection on your adapter, then you have a micropohone. Then plug the 3.5 jack into the end (instead of the headphones)
The large block adapter that came in the box works for me and allows me to use my car speakers w/ aux input and there is no problems with the microphone.
I had this problem with my tilt with the Y splitter adapter, however the multi adapter that comes in the fuze box works for me perfectly.
http://cgi.ebay.de/Audio-Adapter-3-...14&_trkparms=72:1229|66:2|65:12|39:1|240:1318
There will be the same offers on ebay in your country. Searchwords: HTC 3,5mm
I just got a new car that has an auxiliary jack that says I can play my music from MP3/Ipod players. I bought myself a 3.5 mm cord, plugged it into the HD and the Auxiliary port in the car stereo, but there's no sound.
Is there something else I need to do in order to hook my Blackstone up to my car stereo's Auxiliary jack? I figured the 3.5 mm Auxiliary port would just hook up to the HD's headphone jack as if the stereo would act as headphones. Am I wrong?
With mine, I just plugged the 3.5mm jack into the HD and every sound even phone calls automatically came through the cars speakers.
Try plugging another device with a 3.5mm jack into the car, if there is still no sound the theirs either a setting on the head unit or cable may be faulty.
Here is the cable I used, connected directly to the back of the head unit using RCA connectors.
http://catalog.belkin.com/IWCatProductPage.process?Product_Id=172348
Hmm, does sound (sorry) like a cable problem. I have plugged the HD into external speakers via the 3.5 socket with no problems.
What you are aiming for should work but the cable needs to be right.
You probably have to go to the option on your car stereo. It's just like changing from the fm receiver to the cd player on your car stereo (except you have to go to aux-in).
Look in the car stereo manual how to activate the aux-in option.
If Headsets work fine on your HD this should work as well.
Then it's not a problem with you phone.
Thanks for the replies, everyone. I did switch it to the "Aux" function as opposed to Radio/Satellite/CD/Etc., so I'll see if my son's iPod Touch works or maybe there's something else I have to do with the stereo in the user manual. Otherwise I'll assume the cable is faulty. Hope my wife didn't throw out the packaging just yet! It was just a cheap $7 retractable one I got from Target. Next option is a 3 foot $15 one.
Also, make sure you connected the cable to the aux-in on the stereo and not the aux-out. This isn't always indicated in a clear way (I'm just thinking what it could be).
Timbojames said:
Also, make sure you connected the cable to the aux-in on the stereo and not the aux-out. This isn't always indicated in a clear way (I'm just thinking what it could be).
Click to expand...
Click to collapse
Yep, thanks for the input. Luckily it's pretty idiot-proof. It's the manufacturer installed Bose stereo system in a 2009 Nissan Rogue. There's only one input on the front face of the stereo panel labeled "Aux In". And you press a button labeled "AUX" to use it as far as I know. Pretty handy!
i have the same problem with my Alpine stereo,has an AUX Input,Even when i enable aux on the head unit still no sound.Taken it to my local car audio garage and theyre baffled!
Later said to me it could be a faulty HU
Ah, well I am used to after market stereo's with the connections on the back (rca connection).
Sorry that I'm not able to help. Well as long as you get sound through headsets and such it is not a problem with the HD, but I guess you figured that out.
Sadly those RCA's are usually outputs for an amp :'(
I'll test my son's iPod Touch today with the cord and see if his works. If his doesn't work also then I'll try a different 3.5 mm to 3.5 mm cord. If THAT doesn't work then I'll have to assume the stereo is malfunctioning.
Another thing that crossed my mind is what if the headphone jack on the HD doesn't produce enough juice to feed into the stereo. Would that be possible? Although it sounds like others are able to get theirs to work, so I'm assuming the HD puts out enough.
Thanks again for the quick input, everybody!
when you plug the lead into the touchHD, you do get the liitle headfones show up on the topbar of the screen?
you havent muted the media player somehow?
you have removed the 100dB eurolimit on the HD output yes?
vol on the HD is around the 80% on both media player and general system sound?
AUX is actually enabled on the headunit in the car? on my factory fitted headunit, the aux button is switchable between the aux line in and an external cd player... if you have the manual for the headunit, have a look to see if there is this option
the headfone jack on the HD pushes out plenty of power, especially if the 100dB limit is removed (hd tweak or advance config... dont forget to disable audio booster and the EQ as that will really mess up the sound)
Ive been pondering this and thought i'd post it here for your general feedback.
the plug for the hearphone/mic headset that comes with the device is a triple pole 3.5mm jack - same thing used by video camcorders into the phono adaptors.
On the back of my car stereo unit ive an Aux in which would be the red/white plugs of this cable for the audio feed. This is generally how i'd plug my phone in to listen to my music.
Now with the 3rd wite (yellow) i was thinking if i used a small PC Mic (3.5mm jack) and get a patch cable made to connect this to a male phono would this work? it'd also give me the ability to hear my phone throughthe car, and a lengthy cable i can hide and place a mic in the car leaving a simple 3.5mm jack to plug into