Hi,
I am wondering what the most convenient way to take my wired earbud with me so that I can listen to music, or making a call using the headphones.
Which earbud pouch do you use ?
Just putting the earbud in the one's pocket is not a good idea, it gets dirty, and the wired get tangled.
I prefer by far a wired to a bluetooth hearphone, because I hate having to bother about another device to charge.
I am using the original HTC Kaiser headphone, because I find it a lot better than any other for the simple reason that it has a volume slider contrary to the HS U110 (cf. http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=155073&p=tech ). And although the E100 (cf. http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=150195 ) has a volume slider, I do not have the use of the other functionalities because I use CorePlayer software exclusively (I also recommend you to do so by the way).
Could you share in this thread, how you carry your wired earbud together with you kaiser ?
Chris
Where did your TyTN II come from?
I'd like to know the answer to this as well. It's interesting that your original Kaiser wired headset has a volume slider because mine does not. The other problem you haven't mentioned with putting the headset wound up in a pocket or bag is that the earpad foam 'socks' often get pulled off.
It seems like HTC (at least here in the UK) are missing the boat big time. Not only do they not supply a case to carry the headset, they also don't supply replacement earpad socks. Fortunately the Motorola ones are interchangable. There are rubberised devices shaped like a dog bone meant for coiling up headset wires but I'd prefer a small fully enclosed case. I'm considering buying a new inner ear style headset soon anyway (as soon as the manufacturer releases a straight plug version that doesn't need an adapter), they suggested I get back to them early in May. This will hopefully resolve the whole issue.
Another think I did not mention: the bend of the headphone mini-USB like jack is done in the wrong direction !! I can't believe it. Mine is bent to the right, which is very annoying to take the stylus in and out !
Do you have your headphone mini-USB like jack bent to the left ??
Flying Kiwi said:
I'd like to know the answer to this as well. It's interesting that your original Kaiser wired headset has a volume slider because mine does not. The other problem you haven't mentioned with putting the headset wound up in a pocket or bag is that the earpad foam 'socks' often get pulled off.
Click to expand...
Click to collapse
I have the same problem as you. Does someone have a suggestion on how to carry the HTC Kaiser wired headphone with you so that you can use it every time you need it ?
Where did you get your Kaiser from?
chris247 said:
Another think I did not mention: the bend of the headphone mini-USB like jack is done in the wrong direction !! I can't believe it. Mine is bent to the right, which is very annoying to take the stylus in and out !
Do you have your headphone mini-USB like jack bent to the left ??
Click to expand...
Click to collapse
No the headset that came with my HTC branded TyTN II bought in the UK have a straight plug with HTC moulded onto it. It sounds like you dont have the original headset that comes with the TyTN II (at least not here in the UK).
Flying Kiwi said:
No the headset that came with my HTC branded TyTN II bought in the UK have a straight plug with HTC moulded onto it. It sounds like you dont have the original headset that comes with the TyTN II (at least not here in the UK).
Click to expand...
Click to collapse
Hi guys !
You were correct, I mixed up the headphones of the HTC Kaiser and the HTC TyTN 1. This is because I had a HTC TyTN 1 (I still have it) before my current HTC Kaiser.
Here is a picture of the headphones of sold with my HTC Kaiser and my HTC TyTN 1 :
Original headphone sold with my HTC Kaiser:
There is no volume slider which is really annoying for me to ajust the sound ! (on the PPC it is cumbersome to change it)
Original headphone sold with my HTC TyTN 1:
The mini-USB jack is bent to the Wrong direction, which is really annoying to get the stylus In and Out of its slot.
So both of them have big drawback !
If you want some earphones of the type that go right into your ear then Seidio may have something in the not to distant future (currently the plug is bent as per TyTN 1 but in an email response to me they said to get back to them around now for an update). I think in terms of getting such a product to market quickly, the more the merrier who contact them about this (and ask for a good holder box/case with them).
Yes, that would be a good news, do you have a photo of the beta product ? or link to it ?
chris247 said:
Yes, that would be a good news, do you have a photo of the beta product ? or link to it ?
Click to expand...
Click to collapse
No but I imagine it'll be a cross between this 2-IN-1 InEar ISOLATOR and the straight plug as per your standard TyTN II headset. As for the case/holder, thats anyones guess but as I'm wanting a non retractable one, it's important they do that right. You may want to see if they're after any Beta testers?
I do agree with you a retractable cable it not that good because it is a weight when you use your earbud.
What about this headset: http://www.expansys.fr/htc/p_htc_item.aspx?i=155073
Apparently you can plug any earbud on it.
Does it have a volume slider ?
Does it have a straight mini-USB ?
chris247 said:
I do agree with you a retractable cable it not that good because it is a weight when you use your earbud.
Click to expand...
Click to collapse
Not only that but the retractor mechanism is another part to break and I prefer the KISS formula for such things!
What about this headset: http://www.expansys.fr/htc/p_htc_item.aspx?i=155073
Apparently you can plug any earbud on it.
Does it have a volume slider ?
Does it have a straight mini-USB ?
Click to expand...
Click to collapse
The picture shows a 3.5 mm (1/8") plug on the headset itself with an adapter plugged into it so it can be used with a TyTN II. It's also a standard size 'outer ear' type earbud rather than the sort I want that go right into the ear canal. No vol slider shown (or mentioned) and as it's described as suitable for a TyTN II it must come with HTC’s 'ExtUSB' plug on the end of the adapter. In short, if you want an outer ear solution you're better off getting the original style headset with ExtUSB plug built in so there's no need for an adapter or added complexity and cost.
chris247 said:
Original headphone sold with my HTC TyTN 1:
The mini-USB jack is bent to the Wrong direction, which is really annoying to get the stylus In and Out of its slot.
Click to expand...
Click to collapse
This one here bends to the left & therefore doesn't get in the way of your stylus (you can take that statement in so many different ways )... http://forum.xda-developers.com/showpost.php?p=2169054&postcount=7
I contacted the Seido online people for an update recently and got a most unhelpful response. Following from the earlier promising email I received, it appears nothing has been accomplished. I can't believe they're not interested in tweaking their product by fitting a straight plug (which they already use on their adapter anyway) so TyTN II users can use their product without problems. I also got the door slammed regarding my querie about a suitable storage case. Maybe the operator was having a bad day - I know I was after that call.
Has anyone else had any luck sourcing an inner ear style headset with mic and answer button which doesn't require an adapter for the TyTN II? What about a storage case for it? I found the 'earbuddy' for ipod headphones but after speaking with a staffmember at a company selling them, he advised me that his mobile phone headset with mic didn't fit as the earbuddy was to small and didn't have space for the mic.
chris247 said:
Hi,
I am wondering what the most convenient way to take my wired earbud with me so that I can listen to music, or making a call using the headphones.
Which earbud pouch do you use ?
Click to expand...
Click to collapse
Plantronics Pulsar 855 Stereo Bluetooth Headset
I let it hanging loose when I listen to music (its hanging balanced around my neck), otherwise I have I have connected it to this Telenor neckless in the end (the plastic thingy I used prolly weigh about 3g or so). Thats daily usag, hanging around my neck ready to just pop out and put into my ear on incomming calls or so.
I got that idea from one of the latest jabra pieces who are shipped out whit same solution, only not fancy as mine
Flying Kiwi said:
Has anyone else had any luck sourcing an inner ear style headset with mic and answer button which doesn't require an adapter for the TyTN II?
Click to expand...
Click to collapse
Here is the latest interesting wired headphone I have found for HTC pocketpc:
http://www.talkietech.com/htcmiusbto3s.html
Flying Kiwi said:
I found the 'earbuddy' for ipod headphones but after speaking with a staffmember at a company selling them, he advised me that his mobile phone headset with mic didn't fit as the earbuddy was to small and didn't have space for the mic.
Click to expand...
Click to collapse
I have found this a way to avoid knot in the headphon thread: http://www.proporta.fr/F02/PPF02P05.php?t_id=2473&t_mode=des
Thanks for your replies chris247. I've also seen those extUSB to 3.5 mm adapters but alas that would still mean an extra join in the system which I don't want. Aside from something else to possibly come unplugged, it's an extra part to potentially fail and extra weight pulling on the cable.
As far as the cable tidy goes I've also seen those things shaped like a dog bone but since finding the sendstation 'earbuddy' http://www.sendstation.com/us/products/earbuddy/ for ipod headphones (and seeing someone coil up there headphones and store them away in a purpose made pouch while on the train), I'd rather something that fully encloses them and protects them as well.
In answer to the original question... I purchased a set of Sony headphones from my local Tesco about a year ago. Came with a little grey drawstring bag (about 3in square). Takes the TnTy II headset no problem.
Sony earphones set me back about £10 - bit much to pay for a bag tho'
ramsdens said:
In answer to the original question... I purchased a set of Sony headphones from my local Tesco about a year ago. Came with a little grey drawstring bag (about 3in square). Takes the TnTy II headset no problem.
Click to expand...
Click to collapse
Do you coil the wire up around anything first or just untangle it when you get them out of the bag? If anyone knows of a phone that does come with a dedicated holder for the supplied wired headphones (with a mic built in) - perhaps this could be bought as a spare part. Do any phone manufacturers know what a 'value added' accessory is?
I think the Sony accessory for the earplug is good idea:
It is a good way to protect the fragile earplugs
Related
With the new impending crackdown on making calls on the move, I dug out the headphones that came with the XDA II and found that they just wont stay in my ear and keep dropping out.
Can any one suggest a single earpiece replacement with a answer/end button that will work on the XDA II ??
I have looked around for a single earphone and found the one that came with the sharp GX 1 works but does not have answer button,my other suggestion would be to buy a pack of earphone foamy things which will make the standard unit much better. Hope this helps.
The earphones that come with the XDA I/II are really pretty good - EXCEPT that they don't stay in your ear. I tried a few others, but couldn't find any that had volume control and answer and were stereo. One of them I tried along the way was from Jabra - which comes with different sized "ear gels" to put on the earpiece.
I took these ear gels, and put them on the XDA headphones and voila! Full featured earphones that are comfortable and stay in my ear!
You can find these gels pretty easily... Here is what they look like:
http://www.cellular4sale.com/jabjeweargel.html
http://www.cellularconceptsonline.com/hf.htm
Regards,
xnappo
I thought the xdaII came with earphones designed for human beings? Perhaps only some of us then...... they stay in my ears..... they seem to have rubber sides which helps.
Plantronics has one of their new headfree headsets that work with the PocketPC. I forgot which model exactly, but saw it at the T-Mobile store recently. It had a litte "rubber" part that fit around your ear to help hold it in place. Try to check that out.
Why dont you try buying any pair of headphones you like, remove the in-ear headphones and attatching the ones you baught them to the mic part. I got an audio specialist to do this for me and he only charged me £5. Now I have all the features and comfortable loud headphones with bass.
Anyone who can hold a soldering iron can modify your existing headset.
You just have to unsolder the wires from the earpieces on the pcb with the mic and have the one you like soldered in place.
Or you could use a 3,5 mm female plug with a short piece of wire instead, so you can connect whatever you want as heaset.
I just got my Nextlink Bluespoon Digital which I bought from Alphanet (an ebay seller). Paid USD$289.85 (AUD$420 landed). Not such a bad price considering that expansys is selling them for AUD$650.
Initial impressions? Rather disappointing. The build quality is rather poor. I ordered two, and both of them showed mold and glue marks. My example has a hair trapped under the LED. You can see the shadow when the LED illuminates.
Outgoing sound quality is outstanding. I tested it on the way home by sticking my head out the window and into the wind. The other party could still hear me speaking. The Jabra BT200 which I borrowed for a while would drown out in white noise.
Incoming sound quality is rather average. This is because the headset is just not loud enough! Conversations are audible when there is little ambient noise but one you are sitting in a car it becomes very difficult to hear anything.
The headset is very comfortable. I have been wearing it for the past 2 hours now and it still feels OK.
yeah like jos say right over the pickup button and mic
and then a female 3.5mm minijack and then plug in ones better
headset would work just fine
it's just solvdering those wires may not be too easy for newbies
as they are somewhat thin
and if people mess up they dont have anything to fall back on
Being a cheapskate I took the spongey bits of a spare set of in ear heaphones and put them over the XDA ones - they stay in a treat now.
Top Tip: Use headphones as ear warmers!
...place headphones into ears and plug into Virgin Atlantic 2.5mm headphone socket - you will notice almost immediately that your left ear will become very warm!
As nice as it was to have my ear warmed it fried my left earbud! I guess the mic / headphone wiring is somewhat different?
So, any suggestions on where to buy replacement earbuds (with mic) for my JAM would be very much appreciated
OB.
----
Found these so far - anyone used them?
http://www.wirelessgalaxy.com/ac/Imate_Jam.html
http://www.seidio-europe.com/SearchResults.asp?Cat=411
Update: DO NOT buy from www.wirelessgalaxy.com if you are in the UK. It has been 3 weeks since I placed my order and no delivery yet and also no response to emails requesting status. Unfortunately very poor service.
OB :evil:
Just a suggestion bro....why don't u make ur own headphones... :wink:
Read this http://forum.xda-developers.com/vie...ghlight=&sid=51a75aa9dcbcef73cd92534ad93c9943
RAGO :lol:
So, I noticed today that left channel from 3.5mm jacket doesnt work anymore. It worked fine week ago or so. No idea what happened to it.
Any suggestions what to do? Could there be some other option than returning for warranty since im from Finland and I dont see FIN stock roms anywhere near.
Should I wait till HTC gives new ROM for HD and then return for warranty?
Its not a burning matter since I got bluetooth headset which works fine.
Tested with 3 different headphones and none of them worked with HD.
It is not totally dead there comes some noise but really quiet.
One reason why I wouldnt like to return for warranty is that I have nicely installed invisible shield.
Probably the solder on the audio connection jack is not very good or has detached itself..send it back for warranty service mate
Does sound very much like a mechanical failure.
One thing to try to eliminate software would be a bluetooth stereo headset.
The Sony HBH ones are excellent and you might find a friendly shop to let you try a set. The pairing is childs play and you should be able to test the sound from TF3D in a few minutes.
Cheesy Dave said:
Does sound very much like a mechanical failure.
One thing to try to eliminate software would be a bluetooth stereo headset.
The Sony HBH ones are excellent and you might find a friendly shop to let you try a set. The pairing is childs play and you should be able to test the sound from TF3D in a few minutes.
Click to expand...
Click to collapse
Yep, I got Jabra 620s stereo bluetooth. works fine.
Going to shop now and buying some compressed air, since it looks like these connectors gather pretty much dust and dirt from pockets, will post back later.
it works!
Okay got it working!
Bought that compressed air and used it full power to 3.5mm hole.
There was excessive amount of dust which made it not connect properly.
woohoo no need for warranty
tunppi said:
Okay got it working!
Bought that compressed air and used it full power to 3.5mm hole.
There was excessive amount of dust which made it not connect properly.
woohoo no need for warranty
Click to expand...
Click to collapse
Good news !!
Hmmm - I must check out those rubber socket covers for my HD ...
WARNING: This might be a long read!
For months, I was completely stumped over why the mic on my Denon C562R and Klipsch s4i headphones was working on the Samsung Vibrant I had previously but not on the HTC Vision I traded it up for. At first, I thought it was a hardware defect and was ready to ship it back to HTC for them to fix (along with some dust underneath the digitiser). However, things got weirder after the mic on my co-worker's Blackberry headphones worked great. In both cases, the middle button to play/stop/skip music works fine and the mic works well (sporadically) on my work-assigned Blackberry Curve. I found after doing a Google/Bing on this that some headphones with mics worked fine, while others didn't.
To keep a long story short, it turns out that the TRRS plugs on headphones made to work with iPhone are slightly different than standard TRRS plugs and the female connectors on most HTC devices are not deep enough for all the contacts to completely line up. Notice in the picture below that the last ring on the Blackberry headset is just a hair bigger than the one on the "Made-for-iPhone" Klipsch headset. This explains why the buttons worked and the mic didn't, as well as why they worked sporadically on the Blackberry.
The cheapest and non-intrusive solution is to buy the Griffin SmartTalk Mic adapter. It costs between $5 and $10 and uses a standard TRRS plug which, as I expected, works great with my Vision. If you're handy with a soldering iron, you could also snip off the appropriate plug from the headset that came with your phone and solder it on with the copper leads. It's pretty easy to do, but I wouldn't want to damage my wonderful headphones this way. If you're in the market for a set of headphones with a mic, be sure to NOT get those labelled as being "Made for iPhone/iPod/iPad." You can easily determine if they are by seeing if they have the volume up/down buttons along with the middle button. If they do, either avoid them or plan to buy that adapter as well.
Hope this helps!
Awesome thank you! WOrks!
I can't find the device -- do you have a link? I have a $70 set of headphones that don't work on my android!
Hello people,
I've finally had enough with the headphone problems many have reported, the distorted sound and triggering voice commands. I've previously swapped the jack with a new one(had to buy a whole mid frame) and now it's started doing it again, about a month later(the original one lasted just as long).
The issue is that this phone is huge and when using it in my pocket with the headphones on, it moves that jack with every step. This wouldn't be a problem if the jack was soldered on or at least wired to the board, but instead it's just placed on top.
So I've decided I want to solder it on. I'm a bit scared as I've never soldered to a pcb board... And I might desolder other items. I'm going to hone my skills first on some other broken devices, but at this point I'm pretty sure I'll do it in the end.
Has anyone else here done this? Want to watch me possibly destroy this otherwise great phone? Heh.
Ty
Dude you're nuts. Just go get some Bluetooth headphones, it's 2016!! I literally haven't used my headphone jack more than 3-4 times in the 4 months I've owned this phone.
Also, I'm pretty sure the headphone jack isn't soldered in specifically so that if the jack moves around a little it won't cause damage to the board. This is common on most/all phones. Soldering it down would be a TERRIBLE idea. You will likely damage your phone.
Why didn't you just send it in for warranty repair?
Sean89us said:
Dude you're nuts. Just go get some Bluetooth headphones, it's 2016!! I literally haven't used my headphone jack more than 3-4 times in the 4 months I've owned this phone.
Also, I'm pretty sure the headphone jack isn't soldered in specifically so that if the jack moves around a little it won't cause damage to the board. This is common on most/all phones. Soldering it down would be a TERRIBLE idea. You will likely damage your phone.
Why didn't you just send it in for warranty repair?
Click to expand...
Click to collapse
Hi, I couldn't send it in because I unlocked it, which voided the manufacturer warranty. If I remember correctly on my old galaxy s4 it was plugged in with a cable, which was a much better solution. The reason my sound interrupts is because when it moves, it moves the pins on the board causing slight interruptions.
However the pins in the jack are long enough and soft enough that they would bend first instead of breaking the board.
And about Bluetooth headphones? I've bought 3 different sets, they either have huge controllers hanging and pulling on one side, or they are too big, or they're poor quality, I've spent more than I want to admit on different sets (see attachment).
So today I'm going to try and solder the jack, and throw this phone away if I break it and buy a small one, that doesn't put that much pressure on the jack in my pocket.
Stay tuned. I should take pictures.
No go
Well, it didn't work. I knew it would be hard to solder the little legs that where under the actual jack. Getting them all melted and touching before they cool down, without melting the plastic or the rubber around the jack was not possible in the end.
Only 2 of the 5 pads actually stuck together, and there was only a buzz coming from the headphones. I decided to open it again and remove the solder just in case something was shorted, I didn't want the sound chip to get toasted. My biggest mistake was leaving the glue on the jack, which stuck to the mid-frame. When I pulled that apart, the jack, with the two pads came with it.
I'm putting the pictures up if anyone wants to have a look at the mess, you can see in the first and second picture why my sound is interrupting: the pad is damaged from continuous friction.
The phone still works so I've lost nothing other than my time.
BTW, at the moment I'm using wired headphones to a Bluetooth adapter. Until they make smaller/lighter wireless headphones I'm stuck with this.
They got Bluetooth without the wire hanging thing that bugs ya (bugs me too) don't have a name or link right now but a quick Google search should pull them up
Ken C said:
They got Bluetooth without the wire hanging thing that bugs ya (bugs me too) don't have a name or link right now but a quick Google search should pull them up
Click to expand...
Click to collapse
Yea, I saw Jordan Keyes review these ones. They are too much like having screws screwed in your ears. If they can get them smaller, and still have 2-3 hours battery, I'll be interested.
I am not sure how the LG Tone type of Bluetooth ear buds are any more intrusive than regular earbuds with a cord hanging down the side of your body! They definitely last a long time for me.
bv90andy said:
Yea, I saw Jordan Keyes review these ones. They are too much like having screws screwed in your ears. If they can get them smaller, and still have 2-3 hours battery, I'll be interested.
Click to expand...
Click to collapse
How about these
Use this instead, it's a taotronics tt-br05 Bluetooth wireless receiver, you can plug your wired headphones in it and use Bluetooth instead of the 3.5mm plug.
Has play/pause and volume/track change buttons. Also has a mic for calls.
Search in Amazon.
Ken C said:
How about these View attachment 3865297
Click to expand...
Click to collapse
They only have 1 hour battery before you have to plug them in the little tube to charge again. The battery technology isn't there yet.
kadopt said:
Use this instead, it's a taotronics tt-br05 Bluetooth wireless receiver, you can plug your wired headphones in it and use Bluetooth instead of the 3.5mm plug.
Has play/pause and volume/track change buttons. Also has a mic for calls.
Search in Amazon.
Click to expand...
Click to collapse
I have actually been using this
Good option, but it wasn't great sound quality.
Anyway, I've bought a second hand Xperia z5 compact and use that now. The moto x style has become a in house tablet.