Related
With the new impending crackdown on making calls on the move, I dug out the headphones that came with the XDA II and found that they just wont stay in my ear and keep dropping out.
Can any one suggest a single earpiece replacement with a answer/end button that will work on the XDA II ??
I have looked around for a single earphone and found the one that came with the sharp GX 1 works but does not have answer button,my other suggestion would be to buy a pack of earphone foamy things which will make the standard unit much better. Hope this helps.
The earphones that come with the XDA I/II are really pretty good - EXCEPT that they don't stay in your ear. I tried a few others, but couldn't find any that had volume control and answer and were stereo. One of them I tried along the way was from Jabra - which comes with different sized "ear gels" to put on the earpiece.
I took these ear gels, and put them on the XDA headphones and voila! Full featured earphones that are comfortable and stay in my ear!
You can find these gels pretty easily... Here is what they look like:
http://www.cellular4sale.com/jabjeweargel.html
http://www.cellularconceptsonline.com/hf.htm
Regards,
xnappo
I thought the xdaII came with earphones designed for human beings? Perhaps only some of us then...... they stay in my ears..... they seem to have rubber sides which helps.
Plantronics has one of their new headfree headsets that work with the PocketPC. I forgot which model exactly, but saw it at the T-Mobile store recently. It had a litte "rubber" part that fit around your ear to help hold it in place. Try to check that out.
Why dont you try buying any pair of headphones you like, remove the in-ear headphones and attatching the ones you baught them to the mic part. I got an audio specialist to do this for me and he only charged me £5. Now I have all the features and comfortable loud headphones with bass.
Anyone who can hold a soldering iron can modify your existing headset.
You just have to unsolder the wires from the earpieces on the pcb with the mic and have the one you like soldered in place.
Or you could use a 3,5 mm female plug with a short piece of wire instead, so you can connect whatever you want as heaset.
I just got my Nextlink Bluespoon Digital which I bought from Alphanet (an ebay seller). Paid USD$289.85 (AUD$420 landed). Not such a bad price considering that expansys is selling them for AUD$650.
Initial impressions? Rather disappointing. The build quality is rather poor. I ordered two, and both of them showed mold and glue marks. My example has a hair trapped under the LED. You can see the shadow when the LED illuminates.
Outgoing sound quality is outstanding. I tested it on the way home by sticking my head out the window and into the wind. The other party could still hear me speaking. The Jabra BT200 which I borrowed for a while would drown out in white noise.
Incoming sound quality is rather average. This is because the headset is just not loud enough! Conversations are audible when there is little ambient noise but one you are sitting in a car it becomes very difficult to hear anything.
The headset is very comfortable. I have been wearing it for the past 2 hours now and it still feels OK.
yeah like jos say right over the pickup button and mic
and then a female 3.5mm minijack and then plug in ones better
headset would work just fine
it's just solvdering those wires may not be too easy for newbies
as they are somewhat thin
and if people mess up they dont have anything to fall back on
Being a cheapskate I took the spongey bits of a spare set of in ear heaphones and put them over the XDA ones - they stay in a treat now.
Greetings all
I've got a problem with my headphone and want to be 100% sure its an hardware fault before having to send it off to O2 repair centre (across the other side of the country)
I'm only getting sound out of one ear piece, I've checked the headphones on another phone and the problem isn't at that end. So I'm wondering if somehow unknowningly I've altered a setting (if even possible) which has chanced the sound output to something like a mono or handfree signal where theres only one plug in your ear?
Is this even possible :shock: any hints would be great!
marto
I guess it's more a hardware problem. It could just be dust/dirt in one of the contacts or worst would be that one contact has been pushed in too much. This can happen when inserting the jack not in a very straight fashion.
If your unit is no longer under warantee and you are brave enough to open it up for cleaning, then do it. I usually use a toothpick soaked in a bit of rubbing alcohol for cleaning, and a needle to push back the contacts.
mda compact ringing prob
do i use this advice for my mda. i put in headphones and no i cant hear it ring. it was making a low low sound but now nothing. i can haear thu the phones
Left channel earphone also not working on mine!
I too have the fault where the left channel cuts out (tho with a bit of jiggling mine kinda works again).
Damn it!!
Anyone have a safe method to cracking the case to see if the jack is stuffed??
(out of warranty of course)
Re: Left channel earphone also not working on mine!
naphman said:
I too have the fault where the left channel cuts out (tho with a bit of jiggling mine kinda works again).
Damn it!!
Anyone have a safe method to cracking the case to see if the jack is stuffed??
(out of warranty of course)
Click to expand...
Click to collapse
Well I don't know about "cracking the cover" but I did unfortunately send it off for a warranty repair to MPS in Qld :x I lost my high quality screen protector and after about 3 weeks of emails and phone calls the unit finally got back to me....still with sounds coming from one ear
The headphones work perfectly in my motorola v635 so I know they're ok, just tossing up whether to go through the hassle of be without my pda again for another month :?
marto
X2 is the answer
Have you tried Blue Trek X2?
hi, i got an imate jamin and i need to replace the audio jack were the handsfree pug in, do anyone know where i can find to buy this part please or if anyone had the same problem how did you solve it.
thanks guys!!
Dodgy Audio jack
My audio jack plug works fine BUT when I unplug the headset, the phone stays in headset mode i.e. no sound from the speakers. If I plug/unplug the headset a load of times it eventually goes back to normal.
Any ideas. My solution is never to use the audio jack!
Audio Jack
I've had two M600's which have done exactly the same thing, both replaced by Orange, I've now upgraded to an M700 and unlocked the old M600 with a PAYG sim and guess what that one has now lost speaker sound so that three with the same fault and this M600 has never had a headset plugged in.
Has anyone else had similar problems?
i had the same problem othillo before it broke so be carefull cause your is about to brake too, i mailed imate and they said the only way to fix it is to send it to them in dubai.. not relally keen to send it there .. but till today i havent find ther part any where it seems that imate dont send out parts ... as soon as i find an alternative i will post it here..
Is this problem caused by the connector itself or is it something else? If it is the connector I can buy a new one at the local hardware store and modify it a little bit to make it fit in my S200, probably going to replace it with an 3,5mm jack if that is possible...
it is caused by the connector in fact htc the original makers of the prophet on there new models they changed it to a usb connector for the handsfree i changed my connector many times with regulas 2.5mm connector but the sound doesnt work properly. what it does it comes out with out bass then when you push the talk button on the handsfree sound comes out good. another thing i noticed is if when you insert the jack plug in the connector and you pull it out a little bit the sound comes better and the talk button works, i know for fact cause i tried it that its not from the handsfee cause i tried it on another device and work properly. the actuall connector for them is different from what you find to buy even if you plug in normal 2.5mm headphone sound doesnt come out right . if you manage to make it work and modify the connector please post it here so who got the same prob like me can have an idea how to fix it... thanks
Audio Jack
Here is what the problem is:
Audio jacks have what is called a normally closed contact. Each contact point actually has 2 parts. In the closed (no headset) the 2 part of the contact point make contact (shorts). This enables the signal to pass through the jack to the phone speaker. When you insert a headset, the 2 points open (break contact) and signal only goes to the headset.
I'm talking from experience as a sound engineer for over 30 years and this is usually the problem 99% of the time when it comes to these type of jacks. One of the contacts (usually the ground when no sound or mic at all) breaks or can no longer "spring" back. I haven't opened mine yet but fully expect this to be the problem.
audio jack
hi jsapper, i got what you saying and your absolutly right .. the thing i replaced mine 2 times now been done by a technician who fixes phones/pdas the thing with the connectors i replaced the device doesnt work properly sound comes out with out the bass and the talk button doesnt work .. i guess that the original part got some extra connectors or most probably the pins are switched around..
do you know if there is any special connectors for them...
I have a similar pb with my S200:
After running tomtom during 2000km installed on my motorbike w/ a 2.5mm headset, sound seems to no work anymore (neither back or ear speaker), I suppose that vibrations against jack connector are responsible.
With a bluetooth or wired headset sound works.
I have soft/hard reset, upgrade to last WM5 rom, upgrade to WM6 rom, I have tried to get in/out a 2.5mm jack connector without any result.
The ring facility is working (w/ or w/o 2.5mm jack connected), so I can say that the back speaker is working.
I am looking for a solution too...
nb: I have my back speaker + screen replaced one time after 2months.
Dean.
Have you try resolder the Connector?
it was to damaged to be resolded
Hi everybody,
I aswell have this kind of problem from time to time.My solution is quite simple.You have to use the original 2,5" jack with the 3 black "dividings".(sorry for my english) This solution reduced the problem dramatically.If the problem starts now, just plug it in and out a few times and it should work again.
Cheers
Phone Jack is a mechanical mess ...
Same prob, used the headset, rear speaker dead. I opened the prophet, unsoldered the jack and found it misconstructed.
The body of the jack is plastic and not capable to withstand the forces of a plugged in headset.
There are two integrated switches - which - when headset is unplugged are closed and deliver the signal to the speaker. one of the switches does not close anymore when the headset is unplugged. My first solution was to unsolder the jack and bridge the contacts 2 and 4 as welll as 3 and 5.
The rear speaker functions now and I can use the phone.
Next step will be to find a jack solution on the market to finally solve the problem. I will keep you informed!
thanks buzzi will be looking in here... for your post!
i had the same problem with my audio jack and i searched many forums for a solution. the only thing i can say: if you really want to use it and you want go back in normal mode after unplugging, take a little needle. if you look at the audio jack (USB is left to it) you have to stick the needle in the right side of the jack somewhere an search for a little contact (the first time hard to find, the second time easy) and try to push it a bit to the left. so the prophet goes back in normal mode. it sucks but i didnt find another solution...except for buying a bluetooth headset and use software to hear music over that (for mono headsets u can use a programm calles BTAudioToggel, but make sure u use the Toggle software, because there is another one called BTAudio, it sucks because it costs money and doesn't work for me so well)
Greetz
Friends,
My prophet has exactly the same symptoms. However, I opened up the phone and carefully examined the jack. It is crap, sure, but at least on my phone it is not at fault. I tested with a continuity meter and the contact mechanism was working perfectly. Those who tried this measure without success read the following thread:
http://forum.xda-developers.com/showthread.php?t=281331
In my case it is definitely a problem with the speaker, and it seems to be eqaully common. It seems that there is more than one problem dogging the speaker of ths model.
mine's got the small contact switch problem.
it started last night! SO Annoying. Plugging a friend's original 2.5mm adapter in and out solved it temporarily. Then it went again! I have only got a 3rd party 2.5mm plug, and it took me ages to trip the small switch back with that. I have now got a BT headset on order.
Can't wait for the newer design HTC headphone adapter as I have had this problem with 5 different devices! (Tanager, Typhoon, Hurricane, Tornado and now Prophet.)
would agree with hybrid the needle trick fixed it ran media player so i could tell when it was working again. it was mentioned before that using the 2.5mm adaptor with ibky 2 rings as opposed to 3 causes this problem. I can identify with this as i have been using my dopod h/free with no problems for months i use the adaptor to plug in my headphones one time and get a eap of issues!
i will adapt a h/free to plug in some nicer headphones!
Can i use the USB connection as a handsfree port on my prophet?
Cheers
Hi, Prophet's USB is not a USB hub and thus not usable for connecting external devices - only way is bluetooth ...
thanks buzzi
I never use the earphones and the other week I did to listen to the radio during a blackout with the storm we had(I live in newcastle NSW). Since then the phone thinks the earphones are connected all the time but they are not. I've removed the battery and sim and can look through the hole to see about 4 contacts three just on the sides and 1 protruding about 1mm. Should there be 2 protruding ? Is one stuck and therefore throwing a contact to tell the phone to switch off its in built speaker ?? When I go to the radio now the green icon that shows you if your in speaker or earphone use is always set to earphones. When I change it the tick from tapping comes back but the phone ear speaker still does not work. I have looked for a similar problem on the forum but cannot see anything. BTW I have doublesided sticky tape on my battery now after reading a thread.
thanks in advance
are you using o2 headset or some other headset. I encountered this when i used a third party headset jack. After I USED back o2 stereo headset, it work probably
it's the O2 headset you know the one that doesn't fit in your ear. Can you tell me what you see in your 2.5mm earphone jack. Am I barking up the wrong tree thinking it's a mechanical fault with the jack ?
I had the exact same problem with my RW6828, it was repaired for the problem three times before it was replaced. I managed to get it to work for a couple of hours once by putting an alen key into the socket. Other than that, repair or replace.
if it is the o2 atom headset, that mean yr jack might have problem. Is it possible, you shake the o2 headset.
I believe this is one of the common o2 problem.
thread and solution found
ok I didn't look hard enough - http://forum.xda-developers.com/showthread.php?t=302476&highlight=jack
Hi,
I am wondering what the most convenient way to take my wired earbud with me so that I can listen to music, or making a call using the headphones.
Which earbud pouch do you use ?
Just putting the earbud in the one's pocket is not a good idea, it gets dirty, and the wired get tangled.
I prefer by far a wired to a bluetooth hearphone, because I hate having to bother about another device to charge.
I am using the original HTC Kaiser headphone, because I find it a lot better than any other for the simple reason that it has a volume slider contrary to the HS U110 (cf. http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=155073&p=tech ). And although the E100 (cf. http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=150195 ) has a volume slider, I do not have the use of the other functionalities because I use CorePlayer software exclusively (I also recommend you to do so by the way).
Could you share in this thread, how you carry your wired earbud together with you kaiser ?
Chris
Where did your TyTN II come from?
I'd like to know the answer to this as well. It's interesting that your original Kaiser wired headset has a volume slider because mine does not. The other problem you haven't mentioned with putting the headset wound up in a pocket or bag is that the earpad foam 'socks' often get pulled off.
It seems like HTC (at least here in the UK) are missing the boat big time. Not only do they not supply a case to carry the headset, they also don't supply replacement earpad socks. Fortunately the Motorola ones are interchangable. There are rubberised devices shaped like a dog bone meant for coiling up headset wires but I'd prefer a small fully enclosed case. I'm considering buying a new inner ear style headset soon anyway (as soon as the manufacturer releases a straight plug version that doesn't need an adapter), they suggested I get back to them early in May. This will hopefully resolve the whole issue.
Another think I did not mention: the bend of the headphone mini-USB like jack is done in the wrong direction !! I can't believe it. Mine is bent to the right, which is very annoying to take the stylus in and out !
Do you have your headphone mini-USB like jack bent to the left ??
Flying Kiwi said:
I'd like to know the answer to this as well. It's interesting that your original Kaiser wired headset has a volume slider because mine does not. The other problem you haven't mentioned with putting the headset wound up in a pocket or bag is that the earpad foam 'socks' often get pulled off.
Click to expand...
Click to collapse
I have the same problem as you. Does someone have a suggestion on how to carry the HTC Kaiser wired headphone with you so that you can use it every time you need it ?
Where did you get your Kaiser from?
chris247 said:
Another think I did not mention: the bend of the headphone mini-USB like jack is done in the wrong direction !! I can't believe it. Mine is bent to the right, which is very annoying to take the stylus in and out !
Do you have your headphone mini-USB like jack bent to the left ??
Click to expand...
Click to collapse
No the headset that came with my HTC branded TyTN II bought in the UK have a straight plug with HTC moulded onto it. It sounds like you dont have the original headset that comes with the TyTN II (at least not here in the UK).
Flying Kiwi said:
No the headset that came with my HTC branded TyTN II bought in the UK have a straight plug with HTC moulded onto it. It sounds like you dont have the original headset that comes with the TyTN II (at least not here in the UK).
Click to expand...
Click to collapse
Hi guys !
You were correct, I mixed up the headphones of the HTC Kaiser and the HTC TyTN 1. This is because I had a HTC TyTN 1 (I still have it) before my current HTC Kaiser.
Here is a picture of the headphones of sold with my HTC Kaiser and my HTC TyTN 1 :
Original headphone sold with my HTC Kaiser:
There is no volume slider which is really annoying for me to ajust the sound ! (on the PPC it is cumbersome to change it)
Original headphone sold with my HTC TyTN 1:
The mini-USB jack is bent to the Wrong direction, which is really annoying to get the stylus In and Out of its slot.
So both of them have big drawback !
If you want some earphones of the type that go right into your ear then Seidio may have something in the not to distant future (currently the plug is bent as per TyTN 1 but in an email response to me they said to get back to them around now for an update). I think in terms of getting such a product to market quickly, the more the merrier who contact them about this (and ask for a good holder box/case with them).
Yes, that would be a good news, do you have a photo of the beta product ? or link to it ?
chris247 said:
Yes, that would be a good news, do you have a photo of the beta product ? or link to it ?
Click to expand...
Click to collapse
No but I imagine it'll be a cross between this 2-IN-1 InEar ISOLATOR and the straight plug as per your standard TyTN II headset. As for the case/holder, thats anyones guess but as I'm wanting a non retractable one, it's important they do that right. You may want to see if they're after any Beta testers?
I do agree with you a retractable cable it not that good because it is a weight when you use your earbud.
What about this headset: http://www.expansys.fr/htc/p_htc_item.aspx?i=155073
Apparently you can plug any earbud on it.
Does it have a volume slider ?
Does it have a straight mini-USB ?
chris247 said:
I do agree with you a retractable cable it not that good because it is a weight when you use your earbud.
Click to expand...
Click to collapse
Not only that but the retractor mechanism is another part to break and I prefer the KISS formula for such things!
What about this headset: http://www.expansys.fr/htc/p_htc_item.aspx?i=155073
Apparently you can plug any earbud on it.
Does it have a volume slider ?
Does it have a straight mini-USB ?
Click to expand...
Click to collapse
The picture shows a 3.5 mm (1/8") plug on the headset itself with an adapter plugged into it so it can be used with a TyTN II. It's also a standard size 'outer ear' type earbud rather than the sort I want that go right into the ear canal. No vol slider shown (or mentioned) and as it's described as suitable for a TyTN II it must come with HTC’s 'ExtUSB' plug on the end of the adapter. In short, if you want an outer ear solution you're better off getting the original style headset with ExtUSB plug built in so there's no need for an adapter or added complexity and cost.
chris247 said:
Original headphone sold with my HTC TyTN 1:
The mini-USB jack is bent to the Wrong direction, which is really annoying to get the stylus In and Out of its slot.
Click to expand...
Click to collapse
This one here bends to the left & therefore doesn't get in the way of your stylus (you can take that statement in so many different ways )... http://forum.xda-developers.com/showpost.php?p=2169054&postcount=7
I contacted the Seido online people for an update recently and got a most unhelpful response. Following from the earlier promising email I received, it appears nothing has been accomplished. I can't believe they're not interested in tweaking their product by fitting a straight plug (which they already use on their adapter anyway) so TyTN II users can use their product without problems. I also got the door slammed regarding my querie about a suitable storage case. Maybe the operator was having a bad day - I know I was after that call.
Has anyone else had any luck sourcing an inner ear style headset with mic and answer button which doesn't require an adapter for the TyTN II? What about a storage case for it? I found the 'earbuddy' for ipod headphones but after speaking with a staffmember at a company selling them, he advised me that his mobile phone headset with mic didn't fit as the earbuddy was to small and didn't have space for the mic.
chris247 said:
Hi,
I am wondering what the most convenient way to take my wired earbud with me so that I can listen to music, or making a call using the headphones.
Which earbud pouch do you use ?
Click to expand...
Click to collapse
Plantronics Pulsar 855 Stereo Bluetooth Headset
I let it hanging loose when I listen to music (its hanging balanced around my neck), otherwise I have I have connected it to this Telenor neckless in the end (the plastic thingy I used prolly weigh about 3g or so). Thats daily usag, hanging around my neck ready to just pop out and put into my ear on incomming calls or so.
I got that idea from one of the latest jabra pieces who are shipped out whit same solution, only not fancy as mine
Flying Kiwi said:
Has anyone else had any luck sourcing an inner ear style headset with mic and answer button which doesn't require an adapter for the TyTN II?
Click to expand...
Click to collapse
Here is the latest interesting wired headphone I have found for HTC pocketpc:
http://www.talkietech.com/htcmiusbto3s.html
Flying Kiwi said:
I found the 'earbuddy' for ipod headphones but after speaking with a staffmember at a company selling them, he advised me that his mobile phone headset with mic didn't fit as the earbuddy was to small and didn't have space for the mic.
Click to expand...
Click to collapse
I have found this a way to avoid knot in the headphon thread: http://www.proporta.fr/F02/PPF02P05.php?t_id=2473&t_mode=des
Thanks for your replies chris247. I've also seen those extUSB to 3.5 mm adapters but alas that would still mean an extra join in the system which I don't want. Aside from something else to possibly come unplugged, it's an extra part to potentially fail and extra weight pulling on the cable.
As far as the cable tidy goes I've also seen those things shaped like a dog bone but since finding the sendstation 'earbuddy' http://www.sendstation.com/us/products/earbuddy/ for ipod headphones (and seeing someone coil up there headphones and store them away in a purpose made pouch while on the train), I'd rather something that fully encloses them and protects them as well.
In answer to the original question... I purchased a set of Sony headphones from my local Tesco about a year ago. Came with a little grey drawstring bag (about 3in square). Takes the TnTy II headset no problem.
Sony earphones set me back about £10 - bit much to pay for a bag tho'
ramsdens said:
In answer to the original question... I purchased a set of Sony headphones from my local Tesco about a year ago. Came with a little grey drawstring bag (about 3in square). Takes the TnTy II headset no problem.
Click to expand...
Click to collapse
Do you coil the wire up around anything first or just untangle it when you get them out of the bag? If anyone knows of a phone that does come with a dedicated holder for the supplied wired headphones (with a mic built in) - perhaps this could be bought as a spare part. Do any phone manufacturers know what a 'value added' accessory is?
I think the Sony accessory for the earplug is good idea:
It is a good way to protect the fragile earplugs