How do you restore the shift to "factory settings"
Ive sold mine and would like to put it back to like when it was new.
Thanks
restore
pJay said:
How do you restore the shift to "factory settings"
Ive sold mine and would like to put it back to like when it was new.
Thanks
Click to expand...
Click to collapse
in vista go comm manager, advanced setting, u can see last option (set windows to default)
cairo08 said:
in vista go comm manager, advanced setting, u can see last option (set windows to default)
Click to expand...
Click to collapse
This will restore snapvue to default (ie: hard reset wm6). If you want to restore Vista to default, reboot your shift and press Fn+F3 while booting.
Erasing everything ?
That really strange, when I do this (Fn+3 for F3), I have the red text asking if I really want to erase all but if hit 'y', nothing really happens and my Shift boots normally to my existing Vista !
Am I missing something ?
==========================
Ok I'm bloody stupid, I didn't even read the sentence correctly : to restore it's 'n' the correct answer ! Sorry....
I going to Restore Fn + 3 = F3 and now restoring and come on error
"X:\windows\system32\WDSCORE.dll is either not desined to run on Windows or it containt an error.Try installing the program again using the original installation media or contact your system administrator or the software cendor for support"
HELPPP
Finally I solved it.
Micron, you should find a guy with a shift with the same language than yours(if you want). Then read the pof's guide about how to backup/restore the recovery partition. Dump it and copy it to your device using the guide(backup or restore lasts 4 hours). I had to do twice but now I ve it working again..
I restored too the first 1MB(mbr + ...)
Dani
snorlax said:
That really strange, when I do this (Fn+3 for F3), I have the red text asking if I really want to erase all but if hit 'y', nothing really happens and my Shift boots normally to my existing Vista !
Am I missing something ?
==========================
Ok I'm bloody stupid, I didn't even read the sentence correctly : to restore it's 'n' the correct answer ! Sorry....
Click to expand...
Click to collapse
your not the only one man!!!
Can any one upload the recovery image for shift in English here.
Thanks in advance
Picheth
The recovery image has inside serial number from windows vista busines license, i think that it is a problem for someone that he want up here a image of its Shift.
recovery WM HTCShift
Hi, I few times make liberate my shift, few times I make foul recovery both systems, last time i installed ShiftHardSPLFinal (it has 2 files - EnableRapi that for start under WM and ShiftHardSPLFinal - for Vista)
I installed first pack under WM and after that second one under Vista/
After The shift loose liberate, I tried clean storage and back up to factory configuration under WM, I did, but now I can make liberate again, I tried to do same under Vista - dos'nt help again.
Now Vista dos'nt see WM, but mobile network it work.
I need some person who can help me recovery all system and better if I can call with this shift.
my email MOD EDIT: REMOVED EMAIL or who can do , I live us, stroudsburg, pa REMOVED PHONE NUMBER
Thank you!
HI! I saw that you had the same question but to be honest I didn't quite understand the answer! Can you please tell me a safe and reliable way to restore my htc shift to its factory settings without trouble? Is it that simple by pressing fn+f3 and then answer no to the question or includes more than that?
Thanks in advance!
Related
Hi guys!
I cannot enter the menu Settings\Connections\USB to PC , it simple do nothing. (i think it stop working after trying a SD to DISKMODE soft)
Can someone tell me what registry keys it use and modify ?
The only way to make it working again is a HARDRESET but i got too much software already instaled and backups carry the error that dont let me enter the menu.
shagratt said:
Hi guys!
I cannot enter the menu Settings\Connections\USB to PC , it simple do nothing. (i think it stop working after trying a SD to DISKMODE soft)
Can someone tell me what registry keys it use and modify ?
The only way to make it working again is a HARDRESET but i got too much software already instaled and backups carry the error that dont let me enter the menu.
Click to expand...
Click to collapse
Give the following a try. Dunno if it will be sufficient or working at all. (Make a backup before doing so).
Hope others will also post their findings.
[HKEY_LOCAL_MACHINE\Drivers\Active\70]
"Key"="\\Drivers\\USB\\FunctionDrivers\\Serial_Class"
[HKEY_CURRENT_USER\ControlPanel\Comm]
"Cnct"="`USB Default"
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]
"DefaultClientDriver"="Serial_Class"
remove the space from Serial_Cla ss
shagratt said:
Hi guys!
I cannot enter the menu Settings\Connections\USB to PC , it simple do nothing. (i think it stop working after trying a SD to DISKMODE soft)
Can someone tell me what registry keys it use and modify ?
The only way to make it working again is a HARDRESET but i got too much software already instaled and backups carry the error that dont let me enter the menu.
Click to expand...
Click to collapse
Mine stopped opening a couple of days back. I wonder if we both carried out some identical activity that can be pinned down (not the above you suggested - does not apply to me). I had to hard reset 3 days ago and over past two days I've been reinstalling apps along with SKtools new app for me. Also been having problems not experienced before with Active sync wanting to set up new relationship on virtually every connection.
Anyway you try Menneisyys suggestion and I'll await your results. If evrything goes kaput I'll know not to bother.
Mike
GREATTTTTTTTTTT Menneisyys!!!!!!!!!!!!!! thankyou very much!
Changing to this:
[HKEY_CURRENT_USER\ControlPanel\Comm]
"Cnct"="`USB Default"
make it work again! It was set to "`USB" only
it stop working again... this time I cannot make it work again and I cant pinpoint where is the trouble.
Hi!
At first - iam german speaking and so iam sorry about my english, if it is not perfect...
Now my problem: I just installed WinVista on my desktop pc an i want to install also activesync to keep my calender/contacts etc... By the way i have Bepe 0.67 Premium German.
So i started everything (a green program looks like for childes) now it is called windows mobile device center, an the first thing the program did is clean-up my touche cruise. no numbers & no calender. s**t.
So i get a little nervous and i search for a backup to get my files back. And i find it. On my MicroSD Card on the device. so i start "SpriteBackup" and the program runs, go, go, go and next next next - loading... and restart.
So... it loads... show me my rom number, the HTC Logo comes -- an then -- nothing. The logo stands on the screen, doing nothing. the only thing i can hear is a sound like when you press I/O for a few seconds, when the window with "would you really shut down" comes.
And so i start searching for a solution. and the ROM could be the solution. because i think i loaded the backup file from the first "original" system, not the bepe 0.67. an so i think the rom is not working with the older version. and because the active sync wont connect to the phone, i can not put a other rom on it, or play again the bepe rom in.
so... understand? and any ideas?
I think you can't do anything at this point... If it is possible flash the original ROM then restore your backup and then take a backup with PIM Backup (search forum) which is cross ROM compatible...
Then flash bepe's rom again and restore the backup you made with PIM backup!
the problem is that activesync cannot connect with the device - and so i can not update the rom or anything...
To update the rom just manually enter the bootloader by holding the camera button while doing a soft-reset. Then at the tri-colored screen connect the usb cable and run rom updater (assuming you have hard-spl installed ofcourse )
yeah! thank you!
now i only have to find the missing numbers...
Have a nice day!
Can someone tell me , how I myself to reinstall windows mobile 6.1 of my HTC Touch Diamond?
Thanks in advance
<whisper>search....</whisper>
wanna try hardreset?
RTFM!
oh my...
Do you want to take yoru device to factory condition??
Follow this easy steps..
1) Go to a stair
2) Drop it
3) buy a new one!!
im just kidding..
If you want to hard reset you can do it by pressing simultaneously the action button, the down key and then press the reset pin. Keep holding the keeps and follow the instructions.
Or try a new rom. But always make a backup of your appointments and phone numbers! They will be deleted.
hardreset or new rom
I suggest juicy 2.5
press and hold 'volume down + center button + red reset button' for hard reset
Epic Fail Guy is here to ruin the thread. but wait, i already did
Everybody...please help me...
I've tried to uninstall a program that i didn't need (spb shell)
But after the software was uninstalled, start menu are empty (just today displayed)
What can i do to solve the problem....
Maybe someone can help me...
lookmonth said:
I've tried to uninstall a program that i didn't need (spb shell)
But after the software was uninstalled, start menu are empty (just today displayed)
What can i do to solve the problem....
Maybe someone can help me...
Click to expand...
Click to collapse
Check under Settings>Personal>Menus
Are other options ticked there? If not, tick them.
Baronic said:
Epic Fail Guy is here to ruin the thread. but wait, i already did
Click to expand...
Click to collapse
PARTY HARD!1!!1
Guys help me please!!!
When i try to install some .cab file i've receive message ""Installation of [Program which is installing] for windows mobile.CAB was unsuccessful
I try to flash rom 2-3 times, but still makes the same problem
what CAB file you are installing? maybe the CAB file youre trying to install is not compatible for your device...
I tried to install Skype 3.0 And SKTools, but on the old ROM and original running perfect, now even on original rom makes this problem (I tried with original ROM, but again without success)
P.S. How I can restore all setings to default (Registry,plug-ing,files and everything) as when i bought it
Hi7MaN said:
I tried to install Skype 3.0 And SKTools, but on the old ROM and original running perfect, now even on original rom makes this problem (I tried with original ROM, but again without success)
Click to expand...
Click to collapse
-- uhmm i dont use Skype and SKTools as you are but maybe someone on this forum can drop by and help you with that...
Hi7MaN said:
P.S. How I can restore all setings to default (Registry,plug-ing,files and everything) as when i bought it
Click to expand...
Click to collapse
- To restore to factory settings Go To Settings/System/Clear Storage input 1234 and tap OK... this will return all youre system settings to factory defaults (WARNING) this is like HARD RESET!
I tried with "Clear Storage" option, but again without success
Any other advices ?
Hi7MaN said:
I tried with "Clear Storage" option, but again without success
Any other advices ?
Click to expand...
Click to collapse
Try to hard reset your device this will restore everything back to standard
Hold camera and comms button press reset with your stylus keep holding buttons untill message appears on screen then release both buttons and press green send key
A message should appear saying formatting and your device will reset you will go through the set up like a newly flashed rom ie,, calibrate screen ect..
Or you can look on wiki for more
Also i see that you are having trouble installing those cab files you must make sure that the version you are trying to install is both compatible with your device and compatible with your windows mobile version
I fix the problem
Windows Vista makes me this problem, i tried to install .cab files on XP and everything works perfect
Thanks to all
Sorry for my bad English
arrrgh
nice to hear this!!!
no wonder Microsoft scrapped that crappy OS but now they are making an even worse pile of crap
I don't know about Windows Mobile but I had almost the same problem on Android, maybe this explanation can help you and you can look for your own solution then on the Windows Mobile side.
http://forum.xda-developers.com/showthread.php?t=1225841
Good evening.
My HTC crashed. this is the six time now..
So let me tell you what's the problem, hopefully you guy's can help me.
This happend last time:
I was typing an sms and after a while i tilt my mobile to landscape mode.
After doing this my mobile wouldn't return in normal screen mode.
so i soft rest my mobile.. not so smart move.
the text sounds: "tap here for loading HTC sence".
If i tap this it says: "HTC sence loading" but it will return to: "tap here for loading HTC sence".
I cant go into my startscreen so doing anything isn't an option.
Well i soft reset like 5 times and 3 times i yank the battery out while booting but it will ceep telling me the same thing...
My phone: HTC touch HD.
The rom i use: kwbr topix version 3.6
mmm i can't put an link in this post so the thread is: showthread.php?t=460640
So if anyone has an idea for me. that would be great!
I haven't done a hardrest before and I instald my ROM 5 times before now..
Thanks anyway.
Leek.
if just sense isn't working there's no problem, just backup your pim data and any other important files (pictures...) and hard reset the phone.
So if I take all my files from my SD-card and copy them to my PC (or take my SD-card out of my phone) and preform a hard-reset, then is there a chance that my phone will be alive again?
And a question:
A hard rest can be done by: pressing both volume button's and the powerbutton?
Thank you very much!
a hard reset does not affect the contents of the sd card, but the entire internal storage, meaning the space, where "\My Documents" and other folders are located, including all your contacts, messages...
you should sync your pim data (contacts, tasks, appointments...) either with outlook (that does not save your sms!) or with MS myphone (saves all) or pimbackup (saves all) and save your ringtones and possible photos stored internally, you can backup those files either with ms myphone as well or just copy and paste them to the storage card.
also, remember, a hard reset will delete all the programs installed and their respective settings, so keep your needed cab files present.
setting up the device after the hard reset will take some time, keep that in mind, but if you actually never performed one before, you will realise a huge improvement in speed.
Ok thank you very much.
I will preform a hard reset tonight so I can use it soon again ^^.
The data standing on my internal storage isn't usefull anymore. It's already on my pc so when I get home, I'll hard reset it right away!
Speed improvement is alway's welcome!
I'll let you know if my phone works again.
Thanks.
Wauw it worked perfectly!
The hard rest of my phone took only a minut, so that was far much better then installing the ROM over and over again!
Thanks for your advice.
yes, reflashing the rom does not really change anything, as long as you don't hard reset after flashing. to keep ypur phone clean and fast and not pollute it with old trash, always perform a hard reset after flashing. it is highly recommended when changing roms, and when staying on the same one, a hard reset can solve nearly any software related issues that appear over time
New problem...
My phone is acting weird again..
The problem is the startup now.
It takes around 5 min to get to the home screen.
but when you think its finaly started, then there appears an error:
Run FILEOP
\windows\Menu_FILEOP_Operator.txt
faild.
What can i do about this?
Hardreset again?
(this would be my 13th time that my phone crashed... i'm becomming crazy..)
can anyone help me with this?
Greets,
Leek1001
1) Backup all PIM data.
2) Preform Task 29(that's the topic showthread.php?t=653604)
3) Flash with the ROM you like
4) Hard reset 1 or 2 times depending of ROM requirements.
5) Restore the PIM data.
6) Have fun
dilqnski said:
1) Backup all PIM data.
2) Preform Task 29(that's the topic showthread.php?t=653604)
3) Flash with the ROM you like
4) Hard reset 1 or 2 times depending of ROM requirements.
5) Restore the PIM data.
6) Have fun
Click to expand...
Click to collapse
What is the advantage off this app Task 29?
because i don't know whats the main problem, so would this solve my problem?
Greets,
leek1001
Task 29 format the main memory of the PPC. Read the topic for more info. From my experience it make wonders
leek1001 said:
What is the advantage off this app Task 29?
because i don't know whats the main problem, so would this solve my problem?
Greets,
leek1001
Click to expand...
Click to collapse
Follow the f***ing link and read the thread. You'll find all the answers there!
motionz said:
Follow the f***ing link and read the thread. You'll find all the answers there!
Click to expand...
Click to collapse
Thank you for reading my entire post instead of the first line....
I say that I don't know what the problem is and nobody gave me an answer. task29 could fix my problem but I still don't know the exact problem...
motionz said:
Follow the f***ing blah blah blah
Click to expand...
Click to collapse
Pr1k...
leek1001, if i was you mate id reflash, remember to hard-reset but if that dont solve your problem, start reading about task29 dude..
raving_nanza said:
leek1001, if i was you mate id reflash, remember to hard-reset but if that dont solve your problem, start reading about task29 dude..
Click to expand...
Click to collapse
I've tried a reflash and afterwards a hardreset but didn't workout.
I'm following the topic about task29 now
I'm going to try it this weekend. thanks.
Well it worked out perfectly!
for everyone having troubles with the ROM's of Kwbr try to update your radio rom version!
I had 1.09 and now I've version 1.17.
men.. if I had done that earlier!
Greets,
Leek1001
...
glad you got yourself sorted dude..