Database Users

Replacement Bluetooth Icon service for WM2003SE

Hi,
here's the replacement for the bluetooth icon shown in the taskbar.
It doesn't improve anything. It just contains other BT icon set... ehm... which I just drawn.. )))))
It should run on WM2003SE devices with MS BT stack, but i only tested it on my XDA2 with 2.06SE
comments are welcome...
buzz

thx
IT WORKS GREAT!!! THX Buzz_lightyear

Good Work Buzz!
Definitely looks a lot better than stock!

Re: thx
xp said:
IT WORKS GREAT!!! THX Buzz_lightyear
Click to expand...
Click to collapse
hehe, nazdar, teba som cital tusim niekde na ce4you.cz ... )))
buzz

and how do you switch back to the original ? by uninstalling the cab ?

snorlax said:
and how do you switch back to the original ? by uninstalling the cab ?
Click to expand...
Click to collapse
It is not that easy, coz the dll is used by the system and locked for deletion. So if you just uninstall it, it says, that it can't delete it...
You must edit your registry manually to disable my dll first and then uninstall it from Start -> Settings -> System -> remove programs.
It's a bit hard to deal with these system files. It is not like if you have some regular app, which you just install and then uninstall... (
1. Correct your registry to default:
[HKEY_LOCAL_MACHINE\Services\BTIcon]
"Dll"="BTIcon.dll"
2. Reset
buzz

have been having this missing BT icon since I first had my JAM. Previously Buzz's headset enabler brought my BT icon back but after a hard reset and install the BT icon is missing again even with Buzz's headset enabler. Will try this replacement BT service cab and report.

still no BT icon for me

BT Icon sometimes doesn't load after soft-reset
Hello Buzz! 8)
Fine work with your Icon... I have found the new icon after flashing my Italian Qtek 2020 to the ROM cooked by Dr.Stein for Brix03 with WM2003SE... in fact in his extended ROM there is your CAB. But Sometimes the Icon disappear, and more on, about 50% times I make a softreset, your Icon doesn't appear in my tray. But Bluetooth works smooth, the same. How can I start the icon independently? Thank you!
Cristian :wink:

Re: BT Icon sometimes doesn't load after soft-reset
tesking said:
Hello Buzz! 8)
Fine work with your Icon... I have found the new icon after flashing my Italian Qtek 2020 to the ROM cooked by Dr.Stein for Brix03 with WM2003SE... in fact in his extended ROM there is your CAB. But Sometimes the Icon disappear, and more on, about 50% times I make a softreset, your Icon doesn't appear in my tray. But Bluetooth works smooth, the same. How can I start the icon independently? Thank you!
Cristian :wink:
Click to expand...
Click to collapse
...will take a look at it...
buzz

SPB Mobile Shell vs. S2U2 Conflict - is it just me ?

Hi
Hope someone can help. My phone (Polaris) has gone back to O2 for repair and I have to use a Kaiser for the month whilst its away.
Use SPB Mobile shell but love S2U2 for Caller ID, and the Slide 2 Unlock function.
However, they are conflicting with each other. I set S2U2 and then switch off device. When I then push the device back on S2U2 pops up but is then over-ridden by Mobile shell.
Any ideas?
PS> I did use the SPBWatcher cab to make Shell my permanent today screen. Have tried both ticking and unticking the option which says make mobile shell enable when wake up.

So S2U2 pops up when a call is coming in instead of Shell? Right. Is that the problem?

vish4488 said:
So S2U2 pops up when a call is coming in instead of Shell? Right. Is that the problem?
Click to expand...
Click to collapse
Edit: Ohh okay I see what you mean. Is the device set to lock after some time?
Start > Settings > Lock. Is there a password there of is it off.
I had the same problem when that feature was on.

Yes - it's set to lock after 24 hours (my company insist on it otherwise it won't synch my email !!!)

In the newest update of S2U2 1.05 A_C has fixed the problem

Even with 1.05 I still had the same problem. So i had to turn the 'Lock' off.
wearefree said:
In the newest update of S2U2 1.05 A_C has fixed the problem
Click to expand...
Click to collapse

Thats why its doing that. Even though its 24 hours
pna said:
Yes - it's set to lock after 24 hours (my company insist on it otherwise it won't synch my email !!!)
Click to expand...
Click to collapse

vish4488 said:
Even with 1.05 I still had the same problem. So i had to turn the 'Lock' off.
Click to expand...
Click to collapse
You need to change the registry settings:
WakeupDelayMS=100 (delay (in ms) to start S2U2 when the device is woke up. For SPB Mobile Shell user, a longer delay time is required, e.g. 300ms to let the S2U2 to lock the Now screen)
http://forum.xda-developers.com/showthread.php?t=381588

Thanks for your help wearefree, but i tried that a while back and it still didn't work for me.
wearefree said:
You need to change the registry settings:
WakeupDelayMS=100 (delay (in ms) to start S2U2 when the device is woke up. For SPB Mobile Shell user, a longer delay time is required, e.g. 300ms to let the S2U2 to lock the Now screen)
http://forum.xda-developers.com/showthread.php?t=381588
Click to expand...
Click to collapse

brilliant - many thanks !

Quick question
i have done the sdawatcher.cab hack but i was wondering if there is a way to compleatley replace the original today screen with sda?

See if this helps...
http://www.spbclub.com/forum/viewtopic.php?t=17396

Link to manually rotate the screen on diamond

Hi, is there a way to add a link in the start menu to rotate the screen in landscape ? Something direct, so for example you are looking a word document or a pdf, and you just have to press start and "rotate link" to switch to landscape ?
Something light... without anything running background... and no windows to open to get the screen rotated.
This is for the htc diamond.
Ciao
Fred

hasn't advanced config got a parameter to rotate?

htc has a homeplug cab for the today screen that has 1 option to rotate screen 90 degrees every time you select it

frederikk said:
Hi, is there a way to add a link in the start menu to rotate the screen in landscape ? Something direct, so for example you are looking a word document or a pdf, and you just have to press start and "rotate link" to switch to landscape ?
Something light... without anything running background... and no windows to open to get the screen rotated.
This is for the htc diamond.
Ciao
Fred
Click to expand...
Click to collapse
Use the RotateScreen.exe in the zip file i attached

Thanx for your answer
For the htc homeplug, i had this on my artemis but on the diamond with the touchflo3D i cannot have the htc home...
And for advanced config. there are some option for the screen rotation, but if i had to launch advance config. and reboot after changing a parameter, i'd rather go to the parametres of windows
I'll give a try to your progs tomoffel
To be continued...
Ciao
Fred

Thank you ! The .exe for rotating the screen is cool.. i just have one more question : i'm trying to put a link in the start menu to that .exe file... but what is the number at the begining of the link file :
For example i got this one for jbed :
59#"\Stockage interne\Program Files\Opera Mini\AppDB\jbed.exe"
So i wanted to put :
59#"\Stockage interne\Program Files\RotateScreen\rotatescreen.exe"
but is there a problem with the number at beginning being the same. ( sorry for my ignorance... )
Ciao
Fred

Ok i managed to do it with totalcommander...
The rotate and minize .exe are great !!! Thank you !
Seems to be perfect... waiting to try this in a real usage
Ciao
Fred
If only i can put more than 7 links in the start menu programs ! But no matter .. i'm going further and further

nice that you get it to work

tomoffel said:
nice that you get it to work
Click to expand...
Click to collapse
Thanks to you
Ciao
Fred

[Help] i use s2u2 and klaxon

klaxon does not work with s2u2 until i unlook the phone. If i unlook it seems as if klaxon would have started at the right time. without s2u2 it works fine...
second problem: if i activate klaxon time is shown in s2u2. so far its ok. but if i chance the time it does not change in s2u2
could someone help?

solusion
klaxon will work when you change in s2u settings "Do not suspend system" to ON, i had the same problem, don't know how to fix alarm on s2u screen

Hi, thanks for your input.
What option should I look for if I want to use Klaxon and S2U2 ? Klaxon does not work well when used with S2U2... Impossibe to rely on it in the morning...
The option you quote "do not suspend system", I can't locate it in parameters... Where exactly is it ?
Any clue?
THX in advance !

hello, I found this other way, and good for me:
in settings of S2U2 :
Power ->Lock when Screen is Blank : ON
->Lock when backlight turn off: OFF
->Power Off in: 5s
->but Blank screen only: ON
good issue for me and wake up to me (curently)

614c WM 6.5 Deactivate Screensaver?

Could not find to deactivate it. Under setting pictures there is something (got ger version) like "use slideshow after 2 minutes of activity" but it is not activated.
I want the Phone charges fast if its at standby so i want the display is off and no screensaver but i cannot force it to stay of.
Any solution also?
BR in advance
BTW thanks for your great work !

hp photosmart mobile - then menu - tools - screensaver -
(theres a box there called show screen saver - uncheck that) :
took me a while to find it lol

Damn u rock ! Rite but there is no logic it should be at display, system,settings but not at an application!