Hi,
here's the replacement for the bluetooth icon shown in the taskbar.
It doesn't improve anything. It just contains other BT icon set... ehm... which I just drawn.. )))))
It should run on WM2003SE devices with MS BT stack, but i only tested it on my XDA2 with 2.06SE
comments are welcome...
buzz
thx
IT WORKS GREAT!!! THX Buzz_lightyear
Good Work Buzz!
Definitely looks a lot better than stock!
Re: thx
xp said:
IT WORKS GREAT!!! THX Buzz_lightyear
Click to expand...
Click to collapse
hehe, nazdar, teba som cital tusim niekde na ce4you.cz ... )))
buzz
and how do you switch back to the original ? by uninstalling the cab ?
snorlax said:
and how do you switch back to the original ? by uninstalling the cab ?
Click to expand...
Click to collapse
It is not that easy, coz the dll is used by the system and locked for deletion. So if you just uninstall it, it says, that it can't delete it...
You must edit your registry manually to disable my dll first and then uninstall it from Start -> Settings -> System -> remove programs.
It's a bit hard to deal with these system files. It is not like if you have some regular app, which you just install and then uninstall... (
1. Correct your registry to default:
[HKEY_LOCAL_MACHINE\Services\BTIcon]
"Dll"="BTIcon.dll"
2. Reset
buzz
have been having this missing BT icon since I first had my JAM. Previously Buzz's headset enabler brought my BT icon back but after a hard reset and install the BT icon is missing again even with Buzz's headset enabler. Will try this replacement BT service cab and report.
still no BT icon for me
BT Icon sometimes doesn't load after soft-reset
Hello Buzz! 8)
Fine work with your Icon... I have found the new icon after flashing my Italian Qtek 2020 to the ROM cooked by Dr.Stein for Brix03 with WM2003SE... in fact in his extended ROM there is your CAB. But Sometimes the Icon disappear, and more on, about 50% times I make a softreset, your Icon doesn't appear in my tray. But Bluetooth works smooth, the same. How can I start the icon independently? Thank you!
Cristian :wink:
Re: BT Icon sometimes doesn't load after soft-reset
tesking said:
Hello Buzz! 8)
Fine work with your Icon... I have found the new icon after flashing my Italian Qtek 2020 to the ROM cooked by Dr.Stein for Brix03 with WM2003SE... in fact in his extended ROM there is your CAB. But Sometimes the Icon disappear, and more on, about 50% times I make a softreset, your Icon doesn't appear in my tray. But Bluetooth works smooth, the same. How can I start the icon independently? Thank you!
Cristian :wink:
Click to expand...
Click to collapse
...will take a look at it...
buzz
Related
Hi,
here's a modified Bluetooth headset profile today plugin which is not hiding itself from today screen at will... )
It is for wm2003SE MS BT stack - it will probably not work with Widcomm stack, however...
Please give me some feedback.
THANX
buzz
cheers Buzz
I've installed it and seems to be working...It changed the order of my plugins when it installed so had to re-arrange them, then i get a nice blue and white icon on my green grass (bliss) background
I'll let you know if it stays on, could we maybe change the icon to look like the original ?
BTW How are you getting on porting the coloured keyboard skin to 2.06
oh $h1t, steve, i forgot the keyboard... (
will take a look at it, for sure, within next days...
Which ROM do you use?
will see, maybe the icon will be changed, once I'll get some better idea, how it should look like... )))
THANX
buzz
Hi Buzz again !
I'm running 2.06 with Orange ext rom. I've got a M1000 which is just the same as a XDAII
PLugin seems to be fine so far..... the icon is fine as it is, it's just the background could do with being transparent, the icon itself should be black instead of white and when not in use, should have a red line running from top right to bottom left (crossed out effect)
Apart from that, seems to work fine.
If i turn BT off, the icon goes to disabled mode, if BT is turned back on, you enable to icon by simply tapping it..... PERFECT !
I think the text should read slightly differnent as well, Should read "Bluetooth Headset is enabled / Disabled"
Once u get the icon sorted, this can go in the all time greatest SE fixes list !
Keep up the good work, get the keyboard sorted as well, BTW, with the keyboard, once it is installed, can we use different skins available here :-
http://www.lakeridgesoftware.com/forum/viewtopic.php?t=1293
Should read "Bluetooth Headset is enabled / Disabled"
Click to expand...
Click to collapse
sure can do, but i thought it means that the headset itself is on... Therefor it says BT profile is enabled...
...the icon... well that bloody today app is somehow showing 256 colors only. That's why that icon looks so ugly, but maybe I can convert it to 256 colors. That should help.
buzz
re-install the original mode
Oops, I've installed the plugin onmy XDAII (imate), which does not have the SE, but rather the origina WM2003. I've removed the plugin, but could not locate the original "heasdet mode", not on the "TODAY" screen and not on the "Setting- Today-Items".
Any one has an idea how to restore the original "headset mode"?
Thanks.
Re: re-install the original mode
yaronr said:
Oops, I've installed the plugin onmy XDAII (imate), which does not have the SE, but rather the origina WM2003. I've removed the plugin, but could not locate the original "heasdet mode", not on the "TODAY" screen and not on the "Setting- Today-Items".
Any one has an idea how to restore the original "headset mode"?
Thanks.
Click to expand...
Click to collapse
)))
please take a look in your \Windows directory, if there is "profile.dll" or something similar.
buzz
yes i do.
yaronr said:
yes i do.
Click to expand...
Click to collapse
then edit this registry key to look like below:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Today\Items\Profile]
"DLL"="\windows\profile.dll"
"Flags"=dword:00000000
"Options"=dword:00000000
"Enabled"=dword:00000001
"Order"=dword:00000000
"Type"=dword:00000004
buzz
thanks!!!!
thanks!!!
Re: thanks!!!!
yaronr said:
thanks!!!
Click to expand...
Click to collapse
no problem... )
did it work?
buzz
yes. great.
Hey Buzz
Any word on the change to the icon yet and the keyboard ?
Sorry to be a pest but wanna sing your praises from the rooftops but can't yet....
steverae said:
Hey Buzz
Any word on the change to the icon yet and the keyboard ?
Sorry to be a pest but wanna sing your praises from the rooftops but can't yet....
Click to expand...
Click to collapse
so AFAIR you are running 2.06 now, right??
buzz
hey steve... ))))
here you go....
http://forum.xda-developers.com/viewtopic.php?t=16303
...if you would like some other skin, just let me know.
There is also possibility to skin other input methods... ))))))))
This is working on WM2003SE WWE ROMs.
If other languages are required, please tell me.
buzz
Buzz
Great job, BT today pluggin works perfectly on my Wm2003SE. No more hide and seek. 8)
I changed the icons and Bluetooth headset mode is enabled /disabled duialog to the original as in profile.dll. Here is the corrected version. All the rest was your great work
hehe... let me see the icon... )))
buzz
Good Job
You guys are top notch!
Thank you.
buzz how does one change the colours of the keyboard skin Bro?
TIA.
Re: Good Job
[Krueger said:
Dr.Stein]You guys are top notch!
Thank you.
buzz how does one change the colours of the keyboard skin Bro?
TIA.
Click to expand...
Click to collapse
Hi Doc,
please check this thread out...
http://forum.xda-developers.com/viewtopic.php?t=16303
) I can see, that you also use my new BT icon... cool.. )))
buzz
Hey
Checked out the post and it will certainly be perfect if you can port all those skins to your already great work.
Yeah I especially liked your BT icon. Some of my colleagues noticed and switched to it too.
...long time lurker; first time poster...
did a search on this once and if it's here, sorry i missed it:
what is the reg-locale for ensuring the Bluetooth System-Tray Icon is enabled to launch when bt is active. since performing the following reg-edits, it no longer appears.
Increasing font cache and screen performance:
"HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE"
Change "limit" from "8192" (default) to "16384"
Increase general performance:
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\"
Change "CacheSize" value from "0" to "4096".
"HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\CacheSize=0x1000(4096)"
Change "EnableCache" value to "1"
"HKEY_LOCAL_MACHINE\System\StorageManager\Filters\fsreplxfilt\"
Change "ReplStoreCacheSize" value to "4096"
Enable Cleartype in landscape mode:
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
Change "OffOnRotation" to “0”
also... i did this one and then reversed it since i learned (after the fact) that cingular 8125 is already b/g:
Enable 802.11g:
HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS
Assign a value of 1 to dot11SupportedRateMask
Assign a value of 8 to dot11SupportedRateMaskG
thanks to anyone making time to reply!
can someone confirm that their actually is a bt icon that resides in the system tray (top bar) when bt is enabled???
maybe it was a fluke that i actually saw it there for a brief period today?
maybe i'm seeing things?
I have not seen that icon in WM5. But I would like to have it there.
Oh its there alright. In fact, in the online help somewhere on my 8125 it actually lists the icons and their descriptions. One of them is the BT icon.
Its beyond my why there isn't an application that can indicate with a headset icon to notify you if your phone is paired to a BT earpiece. Someone had posted once PhoneAlarm did it, but alas. It does no such thing.
If anyone else knows of a program that will tell you if you're currently connected to a BT device, please speak now!
Ok, found out where the icon is listed. Go to the main WM5 online help on the device and go to Personalizing your device>Over of the Today screen>What do these status icons indicate?
Towards the bottom you'll see the icon... IT EXISTS IT EXISTS!... sigh
it does because today... it appeared for a moment. it played peek-a-boo while device was bugging-out. glad to know i wasn't seeing things. i wonder if having the clock reside in the sys-tray has anything to do with it???
i have found this application http://www.pocketpcfreewares.com/en/index.php?soft=1319 to at least show when the BT is on. It also tries to connect to a headset when there is an incoming/outgoing call. Not having a headset myself, I have not been able to test this function, but bt does turn on on a ring and turn off when I end the call.
i got this cab from somewhere here in the forum which shows the bt icon on the system tray, to allow you switch on/off bluetooth, i beleive it was designed for the universal but it works fine with my kjam (wizard).
majdi said:
i got this cab from somewhere here in the forum which shows the bt icon on the system tray, to allow you switch on/off bluetooth, i beleive it was designed for the universal but it works fine with my kjam (wizard).
Click to expand...
Click to collapse
Thanks! This .cab works great.
Now I only need the same type of icon for wifi. Anyone got such .cab file???
Works Great on KJAM JASJAR and EVEN A T O M !
Thanks.
I tried it on my k-jam but unfortunatelly... nada
I downloaded the cab file to my pc through the link, then copied the file to my devise and run the installation therein...
Am i missing something?
Weird
I installed this, and nothing happened, so I deleted the program, using "remove program" from Settings/System, and it started working. Go figure.
yeah,it works good on MDA Vario(czech TMO firmware)
pls have u got same cab for wi-fi ?
Styxer said:
yeah,it works good on MDA Vario(czech TMO firmware)
pls have u got same cab for wi-fi ?
Click to expand...
Click to collapse
Also still searching for the wi-fi one!
It Does not work on my QTEK 9100. It actually warned me that it's not compatible while trying to install..
Not sure if this has been posted in the Wizard forums before but i just found this in the Universal forums and now have a new Today plugin that displays the status of my Wireless connections. It seems to work for everything except GPRS
Just add the keys below to the Wizards registry.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Today\Items\"Wireless"]
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
For the full info on this, check the Universal forum here:
http://forum.xda-developers.com/viewtopic.php?t=43751
Cheers,
Chris
Nice find puckster will try it - any chance of a screen shot?
meschle said:
Nice find puckster will try it - any chance of a screen shot?
Click to expand...
Click to collapse
There is a photo in the Universal post but here's a screenshot of my K-JAM. The items only seem to activate on the Today screen when you enable the Particualr Wireless mode. As WiFi is disabled as soon as i connect ActiveSync i enabled WiFi in Comm Manager and quickly took the screenshot before WiFi was turned off, hence the unavailable status.
Note you cannot interact with this plugin. it is purely display only.
CHeerts,
Thanks puckster shows up on the list of the items list/today but not on the screen. I assume that is cuz I have no wifi connection right
meschle said:
Thanks puckster shows up on the list of the items list/today but not on the screen. I assume that is cuz I have no wifi connection right
Click to expand...
Click to collapse
When I added the entry, I had to go into the Today setting and uncheck, then re-check "Wireless" which made it appear. At a minimum you should see a bluetooth symbol that says on or off.
If you still can't get it to show up, double check the dword entries you created.
Btw - thanks for bringing this over to the Wizard forum Puckster..it's a handy little Today item.
Mine displays Carrier / Flight Mode & Bluetooth as well as WiFi status.
If WiFi is disabled it does not display on the today plugin however my Bluetooth is always displayed there even when turned off. The Carrier (Vodafone in my case) changes to Flight Mode when you enable it.
I would possibly re-check the registry keys. Also i just remembered i did add 2 extra keys to my registry that werent mentioned in the Universal thread.
I have attached a registry export of the key i created on my K-JAM so maybe you could use this as template as it works on mine.
NOTE: All of the keys are decimal dword entries except DLL which is a string.
Chris
Thanks for your help and I have rechecked everything and all seems ok. Phm reg editor can't seem to import the reg file you gave me ;(
It's nice to have the indicators...but I wish they didn't require the real estate of a whole additional Today bar. I would love to find a way to put indicators like that in the icon tray at the bottom (just above the Contacts soft key image).
this is exactly what i wanted much appreciated.
no go here, but I'm on an old, old ROM
Thanx Puckster, worked like a charm
Exactly what i was lookinf for ty again
zeeboxx:
You need to be using the new AKU2 roms for this to work
which answers "meschle"'s question - assuming he's still on 1.6.7.1
this is excellent... cheers guys!
Hi all,
i have put it in CAB file.
Regards
Have the same on Himalaya
Hi,
I running WM5 on my Himalaya and I have it by default. However, when I tap in the area, it takes me to the Comm Manager or Wireless Manager.
Same on the Wizard or should I check potential differences in the reg?
Cheers,
Hal.
yes. please check the differences. When I click on it, it does nothing.
Thanks.
Having a friend check on his PPC 6700 once he finishes the upgrade.
-Mc
Re: Have the same on Himalaya
ammarl said:
Hi all,
i have put it in CAB file.
Regards
.
Click to expand...
Click to collapse
ammar you are the best man, I have tried all other methods. yours only worked. God bless you.
I ran ammar's cab. The Wireless box appears in my Today screen, and I tried checking and unchecking it, tried soft resets, even tried a re-install of the cab file. I have a T-Mobile MDA, and I have SPB Today Plus and PHM Traylaunch running. I'm using the black theme.
Anything else I might try?
I am trying to remove the bottom bar that is normally removed by deleting wifiinit.lnk and init_tray.lnk from startup...problem is they arent in startup. And when looking at the remove programs list there are no programs. Any suggestions?
Tell us what you have in windows\startup and post copies of the link files if possible, then some bright spark in the forum may be able to work it out for you :wink:
batti
dcinobar
inclose mobile
poutlook
voice command
nickcerda said:
batti
dcinobar
inclose mobile
poutlook
voice command
Click to expand...
Click to collapse
Looks like all the usual links have gone now except poutlook - which many say can be deleted anyhow. They must be using another initiation method - have you checked \windows to see if you have init_tray.exe if you have try a trick i use with clear storage. Make a text file with any text in does not matter - save as init_tray.txt then rename to init_tray.exe and paste it into windows using total commander. Result init_tray.exe will not work. Works with clearstorage.exe and I get no error message. If you do get an error message replace with an exe that does nothing - I hope you get my drift :wink:
EDIT Possibly you could replace it with dcinobar.exe or inclose mobile.exe i.e. rename the exe's and then remove the startup link to the app as this app will be started instead of init_tray.exe
Actually I thought of something similar to that already, but guess what... no init_tray.lnk or .exe and no wifiinit.lnk or .exe anywhere on the device according to resco explorer search. Thank you for the great idea though. Do you or anyone else have any other ideas?
Maybe something to do with it?
[HKEY_LOCAL_MACHINE\init]
"Launch99"="\\Windows\\SAPSettings.exe"
"Depend50"=hex:14,00,1E,00
"Depend20"=hex:0A,00
"Launch10"="shell.exe"
"Launch80"="srvtrust.exe"
"Depend70"=hex:1E,00
"Launch70"="connmgr.exe"
"Launch50"="shell32.exe"
"Depend61"=hex:32,00,3C,00
"Launch61"="ciphase2.exe"
"Depend21"=hex:14,00
"Launch21"="coldinit.exe"
"Depend30"=hex:15,00
"Depend60"=hex:14,00
"Launch60"="services.exe"
"Launch30"="gwes.exe"
"Launch20"="device.exe"
[HKEY_LOCAL_MACHINE\init\BootVars]
"MasterKeyFileDir"="\\windows"
"DBFlags"=dword:00010000
"Flags"=dword:00000005
"RequireCertMod"=dword:00000001
"ProfileDir"="Documents and Settings"
"SystemHive"="Documents and Settings\\system.hv"
TyTN now uses services
The bottom tray icons can be removed by making the following registry changes...
1. To remove the Battery Icon:
[HKEY_LOCAL_MACHINE\Services\Power]
"ShowIcon"=dword:00000000
2. To remove the Wireless Manager Icon:
Delete the registry key...
[HKEY_LOCAL_MACHINE\Services\WirelessMgr]
3. Soft Reset
Tray Icons should now be gone.
You are awesome! Do you have a TyTn or is that for other phones also?
Just received my TyTN today.
The first thing I did was figure out how to get rid of those tray icons!
Actually, if you look at the following post (http://forum.xda-developers.com/viewtopic.php?t=41968) you will find many hacks that are not restricted to the Universal but work on all WM5 machines, inluding the TyTN. I am using a few of the myself on my TyTN
i'm about 200 to $250 short from getting one feel free to donate! I go to This ebay posting every day and just DROOOL over it... again, donations welcome..
better yet, i got a deal! For the amount of that device with shipping which is $779 + $29.99 which comes out to $829.99, (lets just make it $830 flat) I'll throw in my working wizard which has 2 scruffs on the front(comes complete with box, i-mate warranty, headset, case.. basicly everything in the box except the extra stylus), a wizard with a damaged screen, an xbox 360 premium. (just the xbox360 itself, no power supply, no hard drive, no controller (i'll give u a couple demo discs)) AND.... a like new Sony PSP with like 3 or 4 games (i maybe played the thing 10 times since i bought it, its been nesting in its oem case for god knows how long.)
PM me if you'll take me up on that offer
Re: TyTN now uses services
Freshster said:
The bottom tray icons can be removed by making the following registry changes...
1. To remove the Battery Icon:
[HKEY_LOCAL_MACHINE\Services\Power]
"ShowIcon"=dword:00000000
2. To remove the Wireless Manager Icon:
Delete the registry key...
[HKEY_LOCAL_MACHINE\Services\WirelessMgr]
3. Soft Reset
Tray Icons should now be gone.
Click to expand...
Click to collapse
I don't think that just removing the icons removes that space that the bar takes up, does it?
:?:
Re: TyTN now uses services
JNGold said:
I don't think that just removing the icons removes that space that the bar takes up, does it?
:?:
Click to expand...
Click to collapse
Yes, removing the icons removes the tray space.
Try it.
Wiz said:
Actually, if you look at the following post (http://forum.xda-developers.com/viewtopic.php?t=41968) you will find many hacks that are not restricted to the Universal but work on all WM5 machines, inluding the TyTN. I am using a few of the myself on my TyTN
Click to expand...
Click to collapse
Very good link. Thanks Wiz!
Looking at the "HIDEWIRELESSMGRICON.cab" in that link, it shows that you can disable the Wireless Manager Icon by simply changing a single registry entry instead of deleting the whole WirelessMgr key.
To update my directions...
The bottom tray icons can be removed by making the following registry changes...
1. To remove the Battery Icon:
[HKEY_LOCAL_MACHINE\Services\Power]
"ShowIcon"=dword:00000000
2. To remove the Wireless Manager Icon:
[HKEY_LOCAL_MACHINE\Services\WirelessMgr]
"Keep"=dword:00000000
3. Soft Reset
Tray Icons should now be gone.
I have tested these and both work perfectly.
Intellisync 7.0 and Tytn
Hi,
Since I've installed this new version of this software I've been using for a long time now each time I soft reset my device I got stuck on the windows mobile blue background. I can get pass it!!!
Now the good news is via activsync I can still connect to my device and explore it. I can also remove the software (intellisync) and this will let me regain access to my device.
The problem is I can't live without Intellisync so I end up reinstalling it evrytime.
The problem is link (I guess) to the security screen which replaces the default winm 5 one.
Questions :
1 where can I find a step-by-step description of the boot process ?
2 What is the name of the security app object ?
3 Who could help ???
Many Thanks
REMOVE bottom tray on 8525 (mobile 5)
I seen lots of articles about how to remove or turn off bottom tray, but none work. I have similar problem as this user: No intTRay of anykind is found, my startup folder contents are similar to his. I've removed the individual icons like battery, etc, but I need to get rid of the animated today icon, the the Animated Today program puts on the tray, so the tray will disappear...
any ideas?
I may be wrong but the last time I checked, the 8525(TyTN) is not a Wizard.
dharvey4651 said:
I may be wrong but the last time I checked, the 8525(TyTN) is not a Wizard.
Click to expand...
Click to collapse
Yep, you are correct. The Tytn is the big brother to the Wizard, which is known as the 8125, not the 8525.
Reposted
I posted this question in the Hermes forum, which I think is the right place?
thanks,
ck
Freshster said:
Very good link. Thanks Wiz!
Looking at the "HIDEWIRELESSMGRICON.cab" in that link, it shows that you can disable the Wireless Manager Icon by simply changing a single registry entry instead of deleting the whole WirelessMgr key.
To update my directions...
The bottom tray icons can be removed by making the following registry changes...
1. To remove the Battery Icon:
[HKEY_LOCAL_MACHINE\Services\Power]
"ShowIcon"=dword:00000000
2. To remove the Wireless Manager Icon:
[HKEY_LOCAL_MACHINE\Services\WirelessMgr]
"Keep"=dword:00000000
3. Soft Reset
Tray Icons should now be gone.
I have tested these and both work perfectly.
Click to expand...
Click to collapse
Thnx a lot man. i've been thinking that this thing is impossibla on my cingular 8525. but U proved that there are still people who know good methods on how to work w/ registry!
I would like to know please if it is possible to change the Tray shortcuts like Removing the battery icon or modiying it . I know that Tray launcher can add application to tray but it cannot remove the default ones . If someone would guide me on HOW to do it i'll be thankful
Tray icons reg settings.
"dword:00000000" - disable, "dword:00000001" - enable
Power icon
[HKEY_LOCAL_MACHINE\Services\Power]
"ShowIcon"=dword:00000000
Rotation icon
[HKEY_LOCAL_MACHINE\System\GDI\Rotation]
"EnableTray"=dword:00000000
And wireless icon
[HKEY_LOCAL_MACHINE\Services\WirelessMgr]
"Keep"=dword:00000000
Use WIKI and search
thanks dude.
How do I enable the battery icon on top of the taskbar near the clock like in WM6 cause it mine it doesn't show by default.
Someone please help me get that up so that I can also remove the battery and rotation icons from the bottom small taskbar.
1ceMaster said:
How do I enable the battery icon on top of the taskbar near the clock like in WM6 cause it mine it doesn't show by default.
Someone please help me get that up so that I can also remove the battery and rotation icons from the bottom small taskbar.
Click to expand...
Click to collapse
Use this tool it will be very helpful.
krishan2207 said:
Use this tool it will be very helpful.
Click to expand...
Click to collapse
Dang, it's busted for me.
I get a DirectoryNotFoundException when I launch it and I can't seem to find the reason for it.
Worked nicely for me, thanks!
It also works nicely for me. However, I am looking for a way to disable the System Tray and so far, nothing. Have tried most of the reg hacks mentioned here and run into a brick wall as my Dell Axim x51v doesn´t have those reg entries (?!?!?!)
All I want to do is remove the WiFi & BT icons so that the system tray will close. Any ideas folks?
That is because your device uses different drivers for it. However it should not be too hard to find the correct registry entries for your device. Try playing with entries in HKEY_LOCAL_MACHINE\Services\ dir.
Thanks Wexx. Even with the extended ROM visible I only get as far as "HKEY_LOCAL_MACHINE\Services\" before I lose my way. What really *isses me off is that I HAD managed it a while back but cant for the life of me remember how!!!!
Anyway, thanks!
krishan2207 said:
Use this tool it will be very helpful.
Click to expand...
Click to collapse
This is Tool Not work on My Blue Angel WM6 Helmi
Why?
ajie said:
This is Tool Not work on My Blue Angel WM6 Helmi
Why?
Click to expand...
Click to collapse
This tool is working perfect on my Blue Angel "XDA2s" WM6 Helmi.
What error do you get?