Hello,
I have a cingular 8125 and when I get a call, I get the caller ID number (If I have the number in my phone book, the phone will display the caller name as it shows in my Phone book).
I also have a Sony Ericsson Z520a and when I put my SIM in it, I also see the Caller name when I get a call (the infoemation is sent by the operator) enven If I don't have the caller in my phonebook.
The operator is F!d0, they do send to caller's number and name. I am just wondering if anybody has the same service and is able to get it on the Wizard 100.
I never got the name to be displayed on the wizard either when it had the original Cingular WM5 roms or with the TNT WM 6.1 roms.
Thanks
this is a really good question i hope someone will be able to give u some answers
Related
hello, i have need of a today plugin where i can see the number of my sim (the phone number)this is possible?
no sim switcher , only for look the telephone number....
thank
=)
:roll: :mrgreen:
PS: i have ona imate pda2..........................
i need too...
I don't know my sim phone number, i can't call any number, i can't send sms.
How to get the telephone number?
Asus P535, wm6
Cheers,
Sanyi
I just installed Windows Mobile 6 Crossbow Underground on my Wizard G4 (Cingular 8125).
When receiving incoming calls, it is NOT showing any Caller ID information (name & number).
When the my phone rings, a dialgue box opens that simply shows... "INCOMING CALL"
Usually, it shows the number. And in instances when the number is in my contact list, it also show the Name.
AFTER answering the call, I can see the Caller ID info (name & number) on the phone screen.
I tried to do un update to the Radio, and NOW my phone doesn't ring at all!!! HELP!!! What files / tools do I need to update the radio on this G4 device??
WHAT could be causing this? How do I fix it so that when the my phone rings, it actually shows the Caller ID info in the dialogue box that opens?
UPDATE: I finally found a G4 Utility and was able to update the Radio to 02.61.11 ...lets see if that helps!
I have the same problem (caller info not displaying), but on Universal device...
Have you solved that problem?
In my old Hermes (Cingular 8525), there is an option in the Phone Settings to hide my caller ID, so that when I call someone they will not see my number on their phone.
However, with my Mogul, I don't see that option. Does anyone know how can I do this?
I miss this feature on the mogul too. But you can type *67 and the number for example the number is 18001234567 type *6718001234567
P.S. if you find a patch to do this from a menu I would love to hear about it.
Thanks for the info. But that means I can't use my "Phonebook" to dial, as I have to manually enter *67 and then the number.
Maybe some of our resident hacker can figure it out?
Do you just want to permanently hide your number from everyone you call? If so, you should be able to ask your carrier to add a "No Caller Id" code to your account...
you could edit the phonebook entry or make an aditional one that is blocked and call it their "other" number or fax or something
Hi all,
Thanks for the suggestions. I don't want to permanently block my caller ID, only for select number. I prefer to be able to change the caller ID feature on the fly without editing the phonebook, but I guess I'll have to do so until Sprint implement this feature.
Hi
I'm with Bell Canada and we have a option on their web to block caller ID. I selected this option and in my contacts I added *83 to the number I want to unblock my ID. So if I dial a new number I know that my block caller ID is on.
Hello,
I often use an access code to dial internationally, and once I am connected to that access number, I have to enter the number of the person I am calling.
I have an HTC Touch HD with WM6.1pro and cannot find a way to do it. If I connect to the access number, then at the prompt go to my address book and dial a second number, it assumes I want to have two separate calls and puts the access code on Hold... which is not what I want! I do not remember all my friend's numbers, so I do have to use the address book.
With my old nokia n95, once connected I could go to the menu and say I want to dial a DTMF which is the tone you hear when dialing a normal phone. This allows me to follow on with calling the number I need while connected to the call.
Is there a way of doing this on WM6?
I have a kind of work around. I edit my international friends phone numbers as a "car phone" and the numbers look like this
02081802828 p 0027115555555
the access code, then I add p to pause then their number.
The HUGE problem is that when I dial any of my international contacts, the phone displays the same person... so no matter who I call internationally, it always shows a photo of my friend Ian, and displays his name instead of the person I am actually speaking to. I think this is a bug where WM6.1 only looks at the first 11 characters of a number, but the problem is, all my intl numbers have the same first 11 numbers.
Help MUCH appreciated, thanks,
Mark.
livegod said:
Hello,
I often use an access code to dial internationally, and once I am connected to that access number, I have to enter the number of the person I am calling.
I have an HTC Touch HD with WM6.1pro and cannot find a way to do it. If I connect to the access number, then at the prompt go to my address book and dial a second number, it assumes I want to have two separate calls and puts the access code on Hold... which is not what I want! I do not remember all my friend's numbers, so I do have to use the address book.
With my old nokia n95, once connected I could go to the menu and say I want to dial a DTMF which is the tone you hear when dialing a normal phone. This allows me to follow on with calling the number I need while connected to the call.
Is there a way of doing this on WM6?
I have a kind of work around. I edit my international friends phone numbers as a "car phone" and the numbers look like this
02081802828 p 0027115555555
the access code, then I add p to pause then their number.
The HUGE problem is that when I dial any of my international contacts, the phone displays the same person... so no matter who I call internationally, it always shows a photo of my friend Ian, and displays his name instead of the person I am actually speaking to. I think this is a bug where WM6.1 only looks at the first 11 characters of a number, but the problem is, all my intl numbers have the same first 11 numbers.
Help MUCH appreciated, thanks,
Mark.
Click to expand...
Click to collapse
Don't know if it will work... but you coud try (using Advanced Config) to increase the number of digits used to "match" the numbers in the contacts... for example to 18 or 19 numbers... but I cannot immagine what other "consequencies"could happen...
Let us know !
Regards,
K
Hi Kostas
It seems that the problem is actually with spb Mobile Shell and not windows mobile.
When I dial using the windows mobile dialler, it gets the name and picture right, but when I use spb's dialler it shows the wrong person and name...
I will chase it up with them... and thanks for the good idea, unfortunately the Call ID Match does not help the problem.
Efgaristo!
Mark.
I noted an issue with caller ID and the firmware that I'm using (JM1 "New").
Whenever I receive I call, the phone recognize the phone and select the correct contact on my agenda. But whenever I'm on roaming of when I receive and SMS the phone can't identify the correct contact in my phonebook, and show the caller number (or sender number on SMS) instead of the contact in my phonebook.
I don't know if anyone else had this issue, or if it's an issue related to the Brazilian mobile phone infrastructure but I didn't had this kind of issues on my previous phones (Windows Mobile, Symbiam or Blackberry) and I would like to know how to solve this.
Important information: Here in Brazil, when you want to make a long distance call you have to choose the long distance operator on each call. In order to do so you have to select the operator using a two digit code after the long distance code "0" and before the city code. So it's like this:
0 XX 11 99999999
Long distance Operator City Phone
code code code number
So, in order to make this easy, I already included the Operator code in all contacts in my agenda, like: 0411199999999
But when I receive a call (from someone not in my agenda) it doesn't include the operator code. It shows only the phone number if the caller is from my city (99999999) or 0+city code+number when the caller is from other city (02199999999), without the operator code.
So I think that the issue is that the phone tries to match ALL the numbers from caller ID with the first numbers for that contact. So if the caller ID shows "99999999" it will match it with my agenda if I have "099999999", or "0411199999999). So as long as it finds the "99999999" it doesn't matter how long the number in my agenda is.
But sometimes (like when I'm on roaming or when I'm receiving and SMS) the caller ID shows an additional zero in from of the number (099999999). Since the phone can't match all the Caller ID numbers it can't find the contact in my agenda and shows the caller number instead of the contact.
So in order to this work for me it should only match the first 8 numbers from the caller ID with my phonebook. Does anyone know how to solve this? Is there a way to change the agenda configuration in order to match only the first 8 numbers?