Hello,
I often use an access code to dial internationally, and once I am connected to that access number, I have to enter the number of the person I am calling.
I have an HTC Touch HD with WM6.1pro and cannot find a way to do it. If I connect to the access number, then at the prompt go to my address book and dial a second number, it assumes I want to have two separate calls and puts the access code on Hold... which is not what I want! I do not remember all my friend's numbers, so I do have to use the address book.
With my old nokia n95, once connected I could go to the menu and say I want to dial a DTMF which is the tone you hear when dialing a normal phone. This allows me to follow on with calling the number I need while connected to the call.
Is there a way of doing this on WM6?
I have a kind of work around. I edit my international friends phone numbers as a "car phone" and the numbers look like this
02081802828 p 0027115555555
the access code, then I add p to pause then their number.
The HUGE problem is that when I dial any of my international contacts, the phone displays the same person... so no matter who I call internationally, it always shows a photo of my friend Ian, and displays his name instead of the person I am actually speaking to. I think this is a bug where WM6.1 only looks at the first 11 characters of a number, but the problem is, all my intl numbers have the same first 11 numbers.
Help MUCH appreciated, thanks,
Mark.
livegod said:
Hello,
I often use an access code to dial internationally, and once I am connected to that access number, I have to enter the number of the person I am calling.
I have an HTC Touch HD with WM6.1pro and cannot find a way to do it. If I connect to the access number, then at the prompt go to my address book and dial a second number, it assumes I want to have two separate calls and puts the access code on Hold... which is not what I want! I do not remember all my friend's numbers, so I do have to use the address book.
With my old nokia n95, once connected I could go to the menu and say I want to dial a DTMF which is the tone you hear when dialing a normal phone. This allows me to follow on with calling the number I need while connected to the call.
Is there a way of doing this on WM6?
I have a kind of work around. I edit my international friends phone numbers as a "car phone" and the numbers look like this
02081802828 p 0027115555555
the access code, then I add p to pause then their number.
The HUGE problem is that when I dial any of my international contacts, the phone displays the same person... so no matter who I call internationally, it always shows a photo of my friend Ian, and displays his name instead of the person I am actually speaking to. I think this is a bug where WM6.1 only looks at the first 11 characters of a number, but the problem is, all my intl numbers have the same first 11 numbers.
Help MUCH appreciated, thanks,
Mark.
Click to expand...
Click to collapse
Don't know if it will work... but you coud try (using Advanced Config) to increase the number of digits used to "match" the numbers in the contacts... for example to 18 or 19 numbers... but I cannot immagine what other "consequencies"could happen...
Let us know !
Regards,
K
Hi Kostas
It seems that the problem is actually with spb Mobile Shell and not windows mobile.
When I dial using the windows mobile dialler, it gets the name and picture right, but when I use spb's dialler it shows the wrong person and name...
I will chase it up with them... and thanks for the good idea, unfortunately the Call ID Match does not help the problem.
Efgaristo!
Mark.
Related
Hi!
I'm thinking about using my M1000 with my company's Sim.
Problem is that to dial personal numbers I would need to add "46" before the number I am dialing (this is for cost control... the company pays for phone call of collegues and clients, I pay for my personal ones).
Now, I am afraid that due to this restriction I would not be able to tap a personal contact number and have it dialed and also that I would need to delete the whole number from the phone display in order to add the 46 at the beginning.
Is there any application that would allow me to easily add the 46 in front of personal numbers before they get dialed?
THANKS!!!
Chris
Are you saying that you can't simply add the "46" to your personal phone numbers in your Contacts list? I just added "46" in front of a number in my contacts list and dialed it. It did not work on my network, but it did dial it.
I could but...
I could add the 46 in front but...
0) do it for all of my contacts its a long work...
1) It would be difficoult to revert should I change sim
2) I would get all my contact screwed if I try for example to dial from my PC or share them with someone
3) I don't need the "46" for SMS... so if I put it for SMS they would not go...
4) Incoming calls would not be recognized becouse the caller Id could not match the caller with the 46...
So it would be best if I could just add the "46" with a botton to the end of a number I would like to dial, just before I dial it...
Thanks anyway!
Chris
Hi, I've tried searching the forums, but i'm having no luck. I recently got the T-Mobile MDA (great phone, btw), and I was wondering if anyone can advise on how to enter numbers into your contacts, so that you can include a persons extension. This is a feature that I would like to know so that I can call friends and family at their work numbers, where I would have to call the company number, wait for the automated receptionist, and then dial the person's extension.
I use to be able to do this with a Samsung phone that I had for Verizon using a "p" pause feature, which would wait an additional 2 seconds per "p", followed by entering the persons extension. (ie, if you were to enter "(123) 456-789 ppppp 12345", the phone would dial (123) 456-789, wait 10 seconds (5p's = 5 x 2 seconds), then dial 12345.
if the above explanation was confusing, maybe you can check the info from samsumg's site at
http://erms.samsungusa.com/customer...D=557&PROD_SUB_ID=561&PROD_ID=613&AT_ID=24794
it gives an explanation of this "p" pause feature (not my previous phone, but still same feature).
overall, this would make my life easier when i use voice dialing, so that when i'm driving and want to call someone, i don't have to look down at my phone bad and try to touch the numbers (which are a bit inconvenient on the MDA), for the person's extension.
thanks for any advise you can offer.
Use a comma instead of "p"
i.e.
123 456-7899 ,,,,, 12345
thanks lotech, it worked. this will definitely save me from getting into a car accident.
Free program download
Hi there,
I have used this little gem of a program, it allows you to add numbers before and after the number you wish to dial. Very useful if you have a cheap international call contract from your mobile i.e. you have to dial a landline number which connects you. Hope this is of use to you all. keep up the good work site, Cheers.
Fergie.
Myprefixdial: http://www.freewareppc.com/communication/myprefixdial.shtml
Hi All,
Great site!!
I have 2 questions:
1 - When I use smart dialing from my hermes I use the direction arrows once I have found the contact and choose the work number of a contact that has an extension as +1 (999) 999-9999 x 9999 I then get a dialog saying "Invalid entry, please try again."
This same entry dials fine from speed dial or dialing from contacts, any suggestions, it's a real pain to manually dial the whole number.
2 - I have my numbers in outlook 2003 and they are formatted with the +country code format, so all numbers have a + in front of them.
When I smart dial, I can't see the last number of the phone number it only shows
+1 (xxx) xxx-xxx
Again it's really annoying as the only way I can find the number is by dialing and I usually use the smart dial to find a phone number when I am looking for someone's phone number.
BTW I have tried to edit the number and remove the + but outlook put's it back. This is actually good when travelling.
Thanks in advance,
I apologise in advance if this information is somewhere on the site, I am not lazy and I did read quite a bit before posting.
ROM version: 2.15.502.3
WM5
on my outlook, I have the phone num , ext and the phone will dial and wait for pickup before dialing the ext.
of course, i am not using the country code feature, so...
I would be happy with that behavior.
If I could change the font to be smaller in the phone application at least I could see the whole number.
Thanks for sharing.
Hi to all geeks,
I am using my phone some time but I have a problem with the setup of the contacts,
how can u separetly put a mobile phone number and a text message number under the same contact? Every time a cell number entered it goes the same way to text message number too.
I use a 800 number and a pin code before I dial the phone number that I reach, this cause the call history to get the wrong names from adress book. For example
I call BBB but call history shows I call AAA, just because first 10 digits is the same.
Any help would be greatly appreciated
Can someone clarify if WM7 will show both the full name and company for incoming calls.
I save all my contacts in outlook and use the File As to show both Person & Company i.e. John Smith(ABC Ltd).
I have over 1500 contacts for work and it's one of the features that has kept me with Windows for years.
I've tried Android and that doesn't do it. Iphone doesn't do it. Nokia doesn't do it - Not sure about Blackberry.
Also does WM7 have smart dial - I'm sure I read that it didn't, again it's a feature that's kept me with Windows, I have a shocking memory and being able to dial by first name, last name, company or telephone number is invaluble.
Cheers
Pete
For me it shows only 1st and last name + picture if available. Company info is a no go as long as you don't incorporate it in the contact name itself as I usually do.
Smartdial: No. But searching the contact list is easy. Just type 2-3 letters and you have narrowed the results enough. I'm saying this with 700+ contacts.
...I very much like to use voice dial, too. Very reliable, in fact, and fast.
TheOnly1 said:
For me it shows only 1st and last name + picture if available. Company info is a no go as long as you don't incorporate it in the contact name itself as I usually do.
Smartdial: No. But searching the contact list is easy. Just type 2-3 letters and you have narrowed the results enough. I'm saying this with 700+ contacts.
Click to expand...
Click to collapse
That's really dissapointing - as a business tool I find it so very useful.
I guess I'll have to stick with 6.5 until something else similar comes along.
how did get a picture too show i have wm7 on my phone sine dec, and all show is first and last name with number. is there something need too do too get a picture to show thanks
Dear All,
I'm experiencing very strange issue with my WP7 HTC HD2, when receiving call form my saved contacts.
Almost all my contacts are saved in my phone with international dialing code as I'm living abroad.
When I receive call abroad, the name of my contact is displayed.
When I receive call at home the name is not displayed, only the number is displayed and I dont know who is calling while the number is saved in my phone with international dialing code.
To have the name displayed I have to save the number again without international dialing code.
I have the same issue when I dialing also.
Please help.
My_HTC_HD2 said:
Dear All,
I'm experiencing very strange issue with my WP7 HTC HD2, when receiving call form my saved contacts.
Almost all my contacts are saved in my phone with international dialing code as I'm living abroad.
When I receive call abroad, the name of my contact is displayed.
When I receive call at home the name is not displayed, only the number is displayed and I dont know who is calling while the number is saved in my phone with international dialing code.
To have the name displayed I have to save the number again without international dialing code.
I have the same issue when I dialing also.
Please help.
Click to expand...
Click to collapse
Apply the following registry and it will solve your problem:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallIDMatch"=dword:7
petrosk73 said:
Apply the following registry and it will solve your problem:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallIDMatch"=dword:7
Click to expand...
Click to collapse
Thanks sir for your help,
but unfortunately I cannot find CallIDMatch in the path you sent.
even when I searching I cant find it.
I'm using RegistryEditor1.4 from Mosko mobi
My_HTC_HD2 said:
Thanks sir for your help,
but unfortunately I cannot find CallIDMatch in the path you sent.
even when I searching I cant find it.
I'm using RegistryEditor1.4 from Mosko mobi
Click to expand...
Click to collapse
Try with the method described here: http://forum.xda-developers.com/showthread.php?t=907169
It works perfectly!