Database Users

Since New ROM 1.06 CALLER ID did not show pictures ?? HELP

Since New ROM 1.06 CALLER ID did not show pictures anymore ???
nore affected rings, same things ???
If you do a preview on CALLED ID when you affect a picture to a CALLER, the picture and the special ring will show and play
but after you close everything, and you ask the person to call you in order to verified, no pictures SHOW??
I did try several friends and all the same ??
Is that because I have a new version of caller ID 1.20 (build 18586 )
can someone help ?
thanks

OK I found the solution (myself)
Finally I browsed to IA caller Options from the main menu, then selected General. In the General screen, disabled (un-check) the Display Photo During Incoming or Waiting Call checkbox, selected Done to make it effective. Then, I repeated the same steps to enable (check) the Display photo During Incoming or Waiting call checkbox.
Since then I got a few calls with template displayed again.
Hope it helps others.

I was also looking on how to disable IE CALLER (in order to install a substitute CALLER ID program)
here is how to do this :
Instructions for disabling IA Caller ID
(IA Caller ID is NOT Photo Contacts !!!):
Option #1
1. Open IA Caller ID
2. Press Menu>Options>General and un-check the "Display photo during incoming or waiting call" box.
Option #2
1. Open File Explorer on your Pocket PC
3. Browse to \Windows\StartUp\
4. Delete (or move) "IA_CID_Startup.exe"
5. Soft-reset the phone (turn-off, turn-on).

Thanks bruxelles5... I've been looking all over for a possible fix to the IA_Caller problem. I will try it on my MDA2 and see if it works...
Thanks again!

Are there any substitute programs?

there is substitute program of course : http://www.pocketx.net/products/photocontacts_ppc/index.html
And other also I'm shure

you may also want to try sygic's .mobile contacts http://www.sygic.com/mobile/pocketpc/

bnycastro said:
you may also want to try sygic's .mobile contacts http://www.sygic.com/mobile/pocketpc/
Click to expand...
Click to collapse
Does it use its own Caller ID software? I liked PocketX Photo Contscts because it has its own Caller ID module that replaces one we have in JAM. But I did not like the rest the programm does If they could do just Caller ID + assign pictures and ringtones I'd buy it.

Tried Sygic and didn't like it. I want to set my own pictures for incoming calls, not cartoons.

Unknown caller ID problem

I have some contacts saved in my contact list, but when that person calls. It showed up unknown caller. I tried to deleted that number and save it again. But it still shows unknown caller. Some other contacts are fine. Anyone had this problem and has a solution? Is there anything to do with restore? I did a restore recently.

don't know if it helps, but try to save the numbers with the country prefix in the contact.
for example in France here, I save them as +33654321 instead of 0654321, cause I had the same problem some time ago

This doesn't have anything to do with the Wizard - if the Wizard shows "unknown caller" it means that the caller's phone doesn't send the number (the caller can change that, depending on the SIM card - and the caller can also tell the telecom provider of his home phone whether he wants his number to be sent when calling!)...
No way to change that for you, sorry!

I have tried adding the prefix, but still doesnt work!
The number from the caller is not hidden, because the number is displayed, but not the name in the contact list.
for example:
Incoming call
'Unknown Caller'
0709XXXXXX
I have tried to delete and save the contact again, but still the same!!

Oh, so I misunderstood...
Sorry, but then I don't have any idea...

Not sure if this helps. I had the same experience with my other phone (not Pocket PC type), which shows unknown caller even I'm very sure I had his number on my phone, I deleted the number and put it back again, same problem. AND, after all the stuggle, I've finally noticed the problem, which is the fact that I had his name entered twiced (e.g. two contacts, different name with same number). The phone probably got it confused and refused to display a name.
I would suggest, that you remove your problematic contact, try dialing his number on the keypad, and see if the name appears (e.g. the other possible contact that has the same number). If not, then it is not this problem, I guess.

Was about to say, I got this problem, turned out to be a duplicate contact - the phone can't decide who it is, so displays nothing. Pfff.
Be nice if it displayed a list of possible contacts, but...
Delete any duplicate contacts and it should go away.

Now the BT headset can show the Caller ID Name!

Found this link from a post in Wizard section yesterday:
http://www.jetwaremobile.com/index.htm
As the doc says this extension has a SIM access profile, I tried this BT extension on my Universal and a Bluetooth Headset SE HBH-662 that has a Caller ID screen. With this BT extension, now the BT headset can show the Caller ID Name IF the contact name and number exists in the SIM card.
However, it will not show any caller name if the contact only exists in Outlook Contacts.
My test also shows, the number stored in the SIM card has to be exactly the same with one sent over by the operator, otherwise it will not show the caller name. Ex. if the operator sends over the caller number as 171xxxxxx and the number stored in the SIM is 71xxxxxxxx then it will not work. Same thing if the number stored in the SIM is +171xxxxxxx and the operator sends the number 1713xxxxxx then it wil not work as well.
I kind of like to use the format +171xxxxxxxx as this is the international format.
Anyway, this is great, as most people have been waiting for this function to work out of their caller ID BT headset. Now, if we can find out how to make it work to access the Outlook Contact, then its perfect...

Can you report back on your experiences with this? I'm reluctant to install it unless it's proved to work and be reliable with my Jabra BT800.
Mach

Hi guys !
I'm just trying it in my 9000 with Jabra BT 800
In the site linked by lie_ui I read:
Configuration
The JETware Hands-free Extension allows control of the phonebook and messaging information that is provided to Hands-free devices. To configure these options run the Hands-free Config application which is installed in the Bluetooth Options folder in your start menu.
I don't find any new icon or service and i can't see the caller number
Have you tried this application ?
:wink:

I believe in Jwright's Modified ROM there is an application called "SIM Access" that allows this. I was not able to try it because I don't have a headset with caller name capability. I forgot to copy the "BT SIM Access" application, but already tried it on the latest QTEK ROM a month ago and the application worked fine.

Thanks cktlcmd
Now i search for "Sim Access" in the forum
I keep you update :wink:

Diggia said:
Hi guys !
I'm just trying it in my 9000 with Jabra BT 800
In the site linked by lie_ui I read:
Configuration
The JETware Hands-free Extension allows control of the phonebook and messaging information that is provided to Hands-free devices. To configure these options run the Hands-free Config application which is installed in the Bluetooth Options folder in your start menu.
I don't find any new icon or service and i can't see the caller number
Have you tried this application ?
:wink:
Click to expand...
Click to collapse
If you go to Start Menu\programs you'll find the Bluetooth options folder. By the way, don't forget to soft reset first.
I've tried with Parrot CK3100 and now I have the battery and network signal strenght status as well as network name. I'm expecting someone to try with BT800 and to report it.

i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?

i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
Click to expand...
Click to collapse
Yes, same happens to me.
I have the HBH-662, after installing the software the button on my headset does nothing when pushed, unless it is pushed for answering a call, although the name gets displayed when getting a call, provided that the name is on the SIM card.
The other bad thing about it is, if the name is NOT in the sim, it does not display the number, it displays "Unknown" on the headset!
Good step in the right direction though, now it only needs a few tweaks!
Cheers
JP

on my bt800 don´t show the name of the caller

Same here on my BT800 no name just number

hi,
i've tried out the software but i can't activate voice dial now. how can do?

bball4life said:
i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
Click to expand...
Click to collapse
Try checking your "Notifiaction Que". There should only be one sddaemon file. If there is a duplicate then delete it. I use MemMaid for this.

please give me a hand to resolve this problem with vocal dialing.

marcowind80 said:
please give me a hand to resolve this problem with vocal dialing.
Click to expand...
Click to collapse
As I mentioned above, the last time I had a problem with voice dialing was when a duplicated "Notification Que": sddaemon file to be exact, was present. Just delete the duplicated sddaemon file, soft reset, and pair your BT headset again. I used MemMaid's Notification Que to clear duplicated files. I hope this is clear enough.

ok i'll test your suggest....thank you.
excuse me for bad english, i don't speak well this language!
i'm italian

nothing..
not vocal dialing

BT extention
I have another problem in addition to the voice dial problem...... whenever I receive a call from soneone who is using a service provider other than my service provider the device hangs and I have to soft rest the device provided that all the contacts are stored in my SIM card.

Great achievement indeed!!! A first step into a long waited direction
However decided to uninstall it from my Universal, waiting for a new release.
In fact some improvements are required to make it really useful.
I've tried it with my Jabra BT800.
A few issues that I've noticed,
Name displayed, only if:
[list:cca8e10c8e]
Contact present into SIM card.
Outlook phonebook not being used (at least with BT800) despite announced as a feature.
In order for the correspondent name to be displayed, number must be stored into Contacts, exactly as sent by the Operator.
- Some operators do not send the '+CountryCode'.
- This may originate different behaviours for instance depending if user is at Roaming or not.
- Some sort of algorithm would be welcomed to add some "intelligence" here.
[*]If received phone number is not present into SIM card, or not exactly with the same format, 'Unknown' is displayed even in the event of a number being sent... :shock:
The number received should be displayed at these circumstances.
[*]Whenever a Contact name gets displayed, only its first 8 characters are shown.
Much better if complete name contained at Contact, would scroll continuously. :idea:
[*]Voice Speed Dial not working, if JETware Mobile Software is installed.
This is a must, to be solved![/list:cca8e10c8e]
Eagerly waiting for a next release

I agree with the summary listed above. As I listed already in the very beginning of this posting what I found. Yes, its also true that Voice Dialing is not longer working once this app is installed. I did not have Voice Dialing enabled indeed, I tweak the registry so that on the push of the button on the BT headset, it will turn on the BT headset to accept any sound from the PDA instead (I use this for VoIP application).
And now this is not longer working, so similar synthom with the Voice Dialing app.
Once last thing, I cannot uninstall this app.
So for those that have not tried it yet but insterested to try, I would recommend not to try it, just read what we have found so far here, and do not need to repeat the same experience.
Hopefully those guys who write this app read this posting as well and will make the fix.

Not to rain on anyone's parade, but my JAM with its lowly Windows 2003 Mobile SE has been showing the contact name if it exists on the SIM without any modifications on my SE HBH-662.
I made this observation about a year ago on HoFo and six or so months ago right here on XDA-Dev.
This is interesting to say the least.

Caller ID info (Name + Number)

Hello,
I have a cingular 8125 and when I get a call, I get the caller ID number (If I have the number in my phone book, the phone will display the caller name as it shows in my Phone book).
I also have a Sony Ericsson Z520a and when I put my SIM in it, I also see the Caller name when I get a call (the infoemation is sent by the operator) enven If I don't have the caller in my phonebook.
The operator is F!d0, they do send to caller's number and name. I am just wondering if anybody has the same service and is able to get it on the Wizard 100.
I never got the name to be displayed on the wizard either when it had the original Cingular WM5 roms or with the TNT WM 6.1 roms.
Thanks

this is a really good question i hope someone will be able to give u some answers

S2U2 receiving call

Hi there.
I'm still messing with some S2U2 issues... I installed S2U2 but I don't like it receives callings. So I uninstalled it. The problem is that the phone doesn't show any information when a call is received. I gotta press the left desktop button to watch that information (you know, caller ID, phone, name, buttons as Receive, Speaker, etc.) What can I do?? is there a way to restore the default system receiving info?
Thanks!

You should read the instructions carefully in S2U2. It even shows a warning that if you don't reset the device after setting the caller id back, you will lose the system caller ID. Try installing S2U2 again, turn the caller ID off in there let it soft-reset the device and see if that resolves your problem. HTH.

Oh God! It worked now! That was the deal: turning the CallerID off before uninstallation...
Thanks!