Related
Since New ROM 1.06 CALLER ID did not show pictures anymore ???
nore affected rings, same things ???
If you do a preview on CALLED ID when you affect a picture to a CALLER, the picture and the special ring will show and play
but after you close everything, and you ask the person to call you in order to verified, no pictures SHOW??
I did try several friends and all the same ??
Is that because I have a new version of caller ID 1.20 (build 18586 )
can someone help ?
thanks
OK I found the solution (myself)
Finally I browsed to IA caller Options from the main menu, then selected General. In the General screen, disabled (un-check) the Display Photo During Incoming or Waiting Call checkbox, selected Done to make it effective. Then, I repeated the same steps to enable (check) the Display photo During Incoming or Waiting call checkbox.
Since then I got a few calls with template displayed again.
Hope it helps others.
I was also looking on how to disable IE CALLER (in order to install a substitute CALLER ID program)
here is how to do this :
Instructions for disabling IA Caller ID
(IA Caller ID is NOT Photo Contacts !!!):
Option #1
1. Open IA Caller ID
2. Press Menu>Options>General and un-check the "Display photo during incoming or waiting call" box.
Option #2
1. Open File Explorer on your Pocket PC
3. Browse to \Windows\StartUp\
4. Delete (or move) "IA_CID_Startup.exe"
5. Soft-reset the phone (turn-off, turn-on).
Thanks bruxelles5... I've been looking all over for a possible fix to the IA_Caller problem. I will try it on my MDA2 and see if it works...
Thanks again!
Are there any substitute programs?
there is substitute program of course : http://www.pocketx.net/products/photocontacts_ppc/index.html
And other also I'm shure
you may also want to try sygic's .mobile contacts http://www.sygic.com/mobile/pocketpc/
bnycastro said:
you may also want to try sygic's .mobile contacts http://www.sygic.com/mobile/pocketpc/
Click to expand...
Click to collapse
Does it use its own Caller ID software? I liked PocketX Photo Contscts because it has its own Caller ID module that replaces one we have in JAM. But I did not like the rest the programm does If they could do just Caller ID + assign pictures and ringtones I'd buy it.
Tried Sygic and didn't like it. I want to set my own pictures for incoming calls, not cartoons.
Quick question. I just installed phonealarm on my phone but I'm having trouble registering. When I go to the about tab and click register, i can't bring up the keypad to enter my serial number. Does anyone know how to register the software? Send pocketmax an email but no response yet. Your help will be appreciated.
It worked fine for me. Make sure the input field is selected, or do a soft reset and try again.
While we're talking about PhoneAlarm, does anyone understand the notifications? I basically want my phone to have 2 profiles: to vibrate on recieveing SMS and calls, and do to nothing on recieving them. Before i installed phonealarm i would change the phone between vibrate & silent, but now that doesn't seem to work because of the phonealarm profiles. I have to change both the phone and phonealarm to get what i want. Is there an easier way?
Many thanks.
what do you mean input filed needs to be selected?
Mine also never had that problem, but the last 2 times I have reloaded my ppc, it has done the same, not showing the keyboard.
Go to the about tab where you need to register. Click in the blank block where you need to enter the number. Press your start button, it will then bring up the keyboard icon at the bottom. Click on the keyboard and type in your code. Click on register. This way worked for me.
thanks a lot it did the trick!
Found this link from a post in Wizard section yesterday:
http://www.jetwaremobile.com/index.htm
As the doc says this extension has a SIM access profile, I tried this BT extension on my Universal and a Bluetooth Headset SE HBH-662 that has a Caller ID screen. With this BT extension, now the BT headset can show the Caller ID Name IF the contact name and number exists in the SIM card.
However, it will not show any caller name if the contact only exists in Outlook Contacts.
My test also shows, the number stored in the SIM card has to be exactly the same with one sent over by the operator, otherwise it will not show the caller name. Ex. if the operator sends over the caller number as 171xxxxxx and the number stored in the SIM is 71xxxxxxxx then it will not work. Same thing if the number stored in the SIM is +171xxxxxxx and the operator sends the number 1713xxxxxx then it wil not work as well.
I kind of like to use the format +171xxxxxxxx as this is the international format.
Anyway, this is great, as most people have been waiting for this function to work out of their caller ID BT headset. Now, if we can find out how to make it work to access the Outlook Contact, then its perfect...
Can you report back on your experiences with this? I'm reluctant to install it unless it's proved to work and be reliable with my Jabra BT800.
Mach
Hi guys !
I'm just trying it in my 9000 with Jabra BT 800
In the site linked by lie_ui I read:
Configuration
The JETware Hands-free Extension allows control of the phonebook and messaging information that is provided to Hands-free devices. To configure these options run the Hands-free Config application which is installed in the Bluetooth Options folder in your start menu.
I don't find any new icon or service and i can't see the caller number
Have you tried this application ?
:wink:
I believe in Jwright's Modified ROM there is an application called "SIM Access" that allows this. I was not able to try it because I don't have a headset with caller name capability. I forgot to copy the "BT SIM Access" application, but already tried it on the latest QTEK ROM a month ago and the application worked fine.
Thanks cktlcmd
Now i search for "Sim Access" in the forum
I keep you update :wink:
Diggia said:
Hi guys !
I'm just trying it in my 9000 with Jabra BT 800
In the site linked by lie_ui I read:
Configuration
The JETware Hands-free Extension allows control of the phonebook and messaging information that is provided to Hands-free devices. To configure these options run the Hands-free Config application which is installed in the Bluetooth Options folder in your start menu.
I don't find any new icon or service and i can't see the caller number
Have you tried this application ?
:wink:
Click to expand...
Click to collapse
If you go to Start Menu\programs you'll find the Bluetooth options folder. By the way, don't forget to soft reset first.
I've tried with Parrot CK3100 and now I have the battery and network signal strenght status as well as network name. I'm expecting someone to try with BT800 and to report it.
i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
Click to expand...
Click to collapse
Yes, same happens to me.
I have the HBH-662, after installing the software the button on my headset does nothing when pushed, unless it is pushed for answering a call, although the name gets displayed when getting a call, provided that the name is on the SIM card.
The other bad thing about it is, if the name is NOT in the sim, it does not display the number, it displays "Unknown" on the headset!
Good step in the right direction though, now it only needs a few tweaks!
Cheers
JP
on my bt800 don´t show the name of the caller
Same here on my BT800 no name just number
hi,
i've tried out the software but i can't activate voice dial now. how can do?
bball4life said:
i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
Click to expand...
Click to collapse
Try checking your "Notifiaction Que". There should only be one sddaemon file. If there is a duplicate then delete it. I use MemMaid for this.
please give me a hand to resolve this problem with vocal dialing.
marcowind80 said:
please give me a hand to resolve this problem with vocal dialing.
Click to expand...
Click to collapse
As I mentioned above, the last time I had a problem with voice dialing was when a duplicated "Notification Que": sddaemon file to be exact, was present. Just delete the duplicated sddaemon file, soft reset, and pair your BT headset again. I used MemMaid's Notification Que to clear duplicated files. I hope this is clear enough.
ok i'll test your suggest....thank you.
excuse me for bad english, i don't speak well this language!
i'm italian
nothing..
not vocal dialing
BT extention
I have another problem in addition to the voice dial problem...... whenever I receive a call from soneone who is using a service provider other than my service provider the device hangs and I have to soft rest the device provided that all the contacts are stored in my SIM card.
Great achievement indeed!!! A first step into a long waited direction
However decided to uninstall it from my Universal, waiting for a new release.
In fact some improvements are required to make it really useful.
I've tried it with my Jabra BT800.
A few issues that I've noticed,
Name displayed, only if:
[list:cca8e10c8e]
Contact present into SIM card.
Outlook phonebook not being used (at least with BT800) despite announced as a feature.
In order for the correspondent name to be displayed, number must be stored into Contacts, exactly as sent by the Operator.
- Some operators do not send the '+CountryCode'.
- This may originate different behaviours for instance depending if user is at Roaming or not.
- Some sort of algorithm would be welcomed to add some "intelligence" here.
[*]If received phone number is not present into SIM card, or not exactly with the same format, 'Unknown' is displayed even in the event of a number being sent... :shock:
The number received should be displayed at these circumstances.
[*]Whenever a Contact name gets displayed, only its first 8 characters are shown.
Much better if complete name contained at Contact, would scroll continuously. :idea:
[*]Voice Speed Dial not working, if JETware Mobile Software is installed.
This is a must, to be solved![/list:cca8e10c8e]
Eagerly waiting for a next release
I agree with the summary listed above. As I listed already in the very beginning of this posting what I found. Yes, its also true that Voice Dialing is not longer working once this app is installed. I did not have Voice Dialing enabled indeed, I tweak the registry so that on the push of the button on the BT headset, it will turn on the BT headset to accept any sound from the PDA instead (I use this for VoIP application).
And now this is not longer working, so similar synthom with the Voice Dialing app.
Once last thing, I cannot uninstall this app.
So for those that have not tried it yet but insterested to try, I would recommend not to try it, just read what we have found so far here, and do not need to repeat the same experience.
Hopefully those guys who write this app read this posting as well and will make the fix.
Not to rain on anyone's parade, but my JAM with its lowly Windows 2003 Mobile SE has been showing the contact name if it exists on the SIM without any modifications on my SE HBH-662.
I made this observation about a year ago on HoFo and six or so months ago right here on XDA-Dev.
This is interesting to say the least.
In my Contacts in WM 2003 I used to be able to define an access number before I call my contact e.g.:
08707940000,,01xxxxxxxxx.
Where the first number is access number and the second is the contact's number.
However now, the phone only dials the access number (the first number) and after a short pause I can hear it dialling 3 to 4 DTMFs but it is not actually dialling them because the provider is not picking it up the DTMFs.
I have to dial the numbers manually and than its OK.
Can anyone reproduce this? Please help!
Same issue here... I have a contact like this:
+3493532XXXX,1234#,0561617XXXXXXX
This dials +3493532XXXX (my home number) where I have an asterisk box, then I hear the message "Please enter your password followed by the pound key" and the DTMFs for the password and # key are sent correctly (in the number the passwd is 1234), then I hear the tone where I can dial any number, I dial 056 (prefix to use FreeWorldDialout on my asterisk) and 1617XXX (USA Boston number)... I hear all the numbers, but I see my asterisk hanging up before the whole number has been sent.
Very weird... I will do some more tests to see if I can find any solution...
Ok, finally I got the solution... do not put more than 4 digits without a comma (pause)... i saved my contact like this and now it enters the password and dials correctly:
+3493532XXXX,1234#,056,1617,XXX,XXXX
Hope it helps you too! :shock:
I did what you did, the problem seam to be that the DTMF tones are not sent at all aldough I can hear them.
I'm getting this too very odd. Getting rather bored of holding the phone up to my speakers so I can play the right tone and empty my voicemail box!
hi.. got my vario II on friday, and i have the same problem. i used to be able to dial an international number on my UNIVERSAL by calling the local access number and insert a pause before dialing the international number for example: 02071246666,006596454343. however, this does not work on vario 2 and i am very upset about it!!
Hi,
you have checked this:
HKLM\Drivers\BuiltIn\RIL: EnableDTMFSupport = 0
switch to
EnableDTMFSupport = 1
Hi,
Thanks for the help, but i tried that, but it was already set to "1".. i switched to "0", soft reset, switch back to "1", soft reset again, but still not working...
I am also having this problem, cannot empty voicemail at the moment.
I have the same problem on my Vario II. When I'm entering the number manually during the call I can hear the sound, but the other end does not respond to my input at all.
This is really annoying as I can't get into my voicemail or contact customer service
Anyone had a solution for it so far?
Are there more people with a TyTn/Vario with this problem? If so, do respond because it might be a bug or something...
Motje said:
This is really annoying as I can't get into my voicemail or contact customer service
Click to expand...
Click to collapse
On my Vario II if I go to the phone app dial 150 and when connected then press keypad I can then navigate the customer service menus by pressing the on screen number keypad if that is what you mean?
Yes, that is exactly what's not working for me. I can press the keys during the call, and I hear the tone, but somehow the other end does not get them.
Interesting topic I just saw on MoDaCo: http://www.modaco.com/Problem-with-Phone-Dialer-on-Hermes-t247377.html
It turns out that it is not just the DTMF, but also the d-pad up key not going to the call history, and the 3G icon having changed to U.
This all happened after a hard reset.
Can anyone else who did a hard reset confirm if they have any of these problems?
Check that
HKLM\SOFTWARE\HTC\3GVTEngine\AMRDTMFToneFile = "\windows\dtmf122.amr"
then try changing the value of
HKLM\SOFTWARE\HTC\3GVTEngine\UseAMRDTMFTone
from 1 to 0 or 0 to 1
No idea what it means, but it is set up in some Preconfig setups
Excellent, I solved my problems. What I did was re-install all the cab files from the extended ROM. This gave me back my T-Mobile dialer and also made the DTMF working again.
Motje said:
Excellent, I solved my problems. What I did was re-install all the cab files from the extended ROM. This gave me back my T-Mobile dialer and also made the DTMF working again.
Click to expand...
Click to collapse
That worked for me to.
Mine worked fine untill I installed the DeepOcean dialler skin and then it stopped working - removed it and it came back (DeepOcean lacked smartdial).
Installed the Eten dialler and smartdial, and have lost the tones again, think this phone skin is great, but it won't properly uninstall (need the original T-mobile phone skin/graphics) so am currently stuffed!
Have done all the usual soft reboots etc.
I'm confident if I re-instated the deafault t-mobile dialler it would come back, however, I don't want to do a hard reboot and reinsatlll all the add-on apps and data.
Any ideas how to get the DTMF tones working - I can 'hear' them, they are clearly not being sent, If I put it on speaker phone, then in clear conditions the mike picks it up and it works!!
Any ideas?
DTMF Doesn't work - FIXED IT!
Fixed it!!
Editing the registry and setting the value to 0, then soft reboot and dtmf tones are working.
Setting it to 0 wasn't the obvious choice, and previously I hadn't soft rebooted.
Found the following from dhushy in:
http://forum.xda-developers.com/showthread.php?t=276700
Worked it out. For anyone with a similar problem, use the registry editor to locate the following key:
HKLM,"Drivers\BuiltIn\RIL","EnableDTMFSupport",0x0 0010001,1
Change the value from 1 to a 0 and Bob's yer Uncle (for non-British readers that means everything will be cushty - see Only Fools and Horses for a contextual translation)
Did this and I was able to manipulate my voicemail messages as normal.
Click to expand...
Click to collapse
I am on T-Mobile UK.
A Big Thank you
This advice on changing the dtmf code from 1 to 0 was the thing ive been lokking for - for the last 4 months. A really big thank you
I did a search and it seems this has popped up before but no1 had an answer.
I've had my MDA for months now, and only a few days ago did this start happening. This happens for all calls. Including ones i have saved on SIM and phone. I even have some ppl with specific ringtones assigned, the ringtones work, but no caller ID.
When i get an incoming call, i only see half the Incoming Call Notification Bubble.
I don't get the CALLER's ID. I get INCOMING CALL and the answer or ignore options.
Thats it.
I've searched in all the phone options i could think off, maybe thinking i accidentally turned off the ID setting. But for the life of me can't find it.
I really do not want to hard reset, as I've had my device setup perfectly the way i want it...Any help or guidance is much appreciated.
TIA
same problem here! pleeeeeeeeeeease help us!
I've suspected of currupt photo files 'cause me tom tom navigator lost iz settings at the same time. So i've copied the photos again from the PC and didn't fix it. When I try to add a pic to a contact, the program just freezes when I hit "preview".