Radio Rom messed up. - 8525, TyTN, MDA Vario II, JasJam General

Hi, I just bought this phone off craiglist and the sell isn't picking up my calls anymore.
She sold me a corrupt radio rom phone and i can't seem to fix it.
I read all the guides and spent the whole night trying to fix it.
after failing many times, and desperate for help, I'm starting a new thread.
What i know:
this problem started when i tried to unlock my phone with the unlocker v3. the phone kept stopping at 0% and none of the recovery steps work.
I tried hard SPL and it worked. and OS only rom works.
so I have a type 1A brick.
My phone says:
Herm100
IPL-1.04
HERM100
SPL-2.10.Olipro
NO GSM on OS start up.
I tried this fix:
but the problem is, my MTTY, does not show USB, it says CMD, not matter how many times i press enter.
METHOD 1
Disable activesync on your computer by right click on activesync icon -> connection settings -> uncheck "allow USB connections".
Put your Hermes in bootloader mode
Connect device to computer using USB cable.
Open mtty.exe and select USB port, then connect.
Hit enter twice, you will see the "USB>" prompt.
Type the following commands (do not copy paste!!!)
USB> password BsaD5SeoA
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
after i do all this, I press the ok (the one of the left side) button and power button and reset to get back into bootloader.
then i run the ROMUpdateUtility.exe from Unlocker V3
and i still get 0%. whats going on?
any help would be great.
I don't know what i'm doing wrong, I read people are getting it to work with this method, but it's not working for me.
Thanks
Edit:
can somone tell me thats this means in mtty?
Cmd>
Cmd>info 2
HTCSSuperCIDHTCE
Cmd>task 32
Level = 0
Cmd>rtask a
Command error !!!
Cmd>rtask a
Command error !!!
Cmd>rtask b
Command error !!!
Cmd>rtask 0
Command error !!!
Cmd>rtask 1
Command error !!!
Cmd>rtask 3
Command error !!!
Cmd>rtask 4
Command error !!!
Cmd>info 2
HTCSSuperCIDHTCE
Cmd>
that does this mean?

Ok, I was able to flash a Rom with Radio rom on it,
I tried to flash this rom on my phone
http://forum.xda-developers.com/showthread.php?t=371266
and it fails at 0%, then i use a att rom and flashing it to the phone works!
I got my radio rom back, but I only see the radio when there is no sim card inside.
But as soon as i put in a sim card, NO GSM comes back.
does anyone know why?
thanks in advance!

Ray_jai said:
Ok, I was able to flash a Rom with Radio rom on it,
I tried to flash this rom on my phone
http://forum.xda-developers.com/showthread.php?t=371266
.....
Click to expand...
Click to collapse
that rom u tried to flash is not made for the hermes

Yes, i know, But i read from barton on another thread, he used a Hima rom and it worked.
so it worked for me too. it doesn't really get to flash it. It stops at 0%.
I also flash it with active sync.
I just need to get the radio working with Sim again now.
maybe other should try what i did too.

oh oh.....its coming back to me now......installing the hima rom reformats the radio sector or something like that. i remember reading about this some time ago.....and i think pof managed to replicate that process, so you dont actually have to install the hima rom. the link is in the wiki somewhere

I tried most of the stuff on the wiki none of them work, but can you point me to it anyway? maybe i missed it.
thanks.
edit:
i tried fixing it using unlock version V3a, but it screws up my radio again.
going to try V2a next.

http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
here's the link, but it looks like you already tried it. see the links at the bottom of that section, the "related forum threads"

thanks but i tried that.
Ok, i reflash hima rom. and this time, i did the unlockv3a flash.
now my radio is back with the sim in.
but i lose my sim connection when i try to call.
thanks in advance.
Edit:
WHAT THE HELL!!! ARGH I'm so close!!!
the No GSM thing is random, it comes and goes away.
how can I make it stay?
thanks in advance.

I get 0% flashing now too.
Had a hellish time, my radio seems to have been dying over weeks with more and more "no gsm" message regardless of the radio version.
Tried the official t-mobile uk wm6 rom and it crashed (no percentage dialog appeared on the mobile, only the "usb" connected tri colour)
Now when I tried to go to radio 1.50 it is stuck at 0%
Eventually disconnected it and I get the tricolour now and nothing seems to work

try using Mtty, and select USB in the drop down.
Then in the cmd> area, type "set 16 0"
should bring u back to OS with radio still screwy.
then try that Hima Rom link i posted 1 page back.
When flashing the hima rom, just stop it once it says there's an error.
then flash it with a normal rom with radio.
thats how i got my radio back, but it's still screwy.
I wonder if anyone here can help out.
Thanks

Ray_jai said:
try using Mtty, and select USB in the drop down.
Then in the cmd> area, type "set 16 0"
should bring u back to OS with radio still screwy.
Click to expand...
Click to collapse
That has worked so for, thanks.
FYI I have a bad block (638) which "task 2a" seems to do nothing too.
What is the proper output of a successful task 2a?
Will try the rom soon.

I downloaded the rom but neither exe works.
Sorry a bit of a noob at this.
What I do now?

did u enable active sync and use the NO-ID.exe?

note:cross post
sorry for the late reply
i have been dealing with this for 3 days and finally managed to run official AT&T rom for 4 days wout hard reset.
there is a method dumping an official himalaya rom to hermes. az pof explained in one of his posts all commands except radio commands are different in himalaya so it is safe to use dumping method.
it basically deletes everything in radio rom so you can install official rom.
PS: at first install official rom stucked %12 i said damn but in second try %15 third try; success
i am at work now i dont have the link of method but try googling or searching my posts (not too much )
i hope it solves your problem
bartan

does NO GSM still appear once in awhile?
thanks

Hi
I am back. I have been trying to rom update but no luck so far. It just stalls at 12%.

I gave up on this.
it cost 270 ish to repair it from HTC.
so i drew my phone against the wall and it felt a lot better.
still works tho.
for 270 ish, I can get a new phone.

It lives!!!!!
I used the official HTC rom including radio.
Firstly I put the phone in bootloader mode.
I then ran MTTY and executed:
Code:
USB> password BsaD5SeoA
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
I then ran:
Code:
USB> info8 (which returned a bad block - 638)
USB> task 2a
I then closed mtty but did not reboot my phone.
I then ran the rom update utility with the rom and the phone flashed fully (give it plenty of time).
Who knows how stable it will be but damn it feels good to have my phone back.
Calls out are confirmed working so far.
Good luck all

CONGRATS!
for me None of those commands work.
I kept getting errors.

hey zero when you're in bootloader how did you get mtty to work? it keeps saying "usb port cannot open" when i try

Related

No Gsm

Could anybody help me? phone doesn't work on my tytn. no mater with what (original)rom i flash it it just doesnt want to work. when i go to device information there is no radio and no imei.
cukl said:
Could anybody help me? phone doesn't work on my tytn. no mater with what (original)rom i flash it it just doesnt want to work. when i go to device information there is no radio and no imei.
Click to expand...
Click to collapse
Have you been through these links?:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
http://forum.xda-developers.com/showthread.php?t=281533
Mike
Sounds like you're buggered - no GSM is usually quite easy to fix now if you have hard SPL, but I don't think a missing IMEI is so easy
Try this thread http://forum.xda-developers.com/showthread.php?t=286755 There's lots to read but someone might be able to help.
If it doesn't work, try a complete upgrade (CID/SPL/ROM/RADIO) using Mrvanx's guide. http://forum.xda-developers.com/showthread.php?t=299462 I'd recomment Black 2.5 or LSVW as these are stable ROMS and radio 1.38, also hardSPLv7 (Olipro 2.10).
Also try searching for IMEI (Use advanced search and look for posts not threads)
Good luck
cukl said:
Could anybody help me? phone doesn't work on my tytn. no mater with what (original)rom i flash it it just doesnt want to work. when i go to device information there is no radio and no imei.
Click to expand...
Click to collapse
@mikechannon
I've tryed the thing in the first link but it says "password incorect"
cukl said:
@mikechannon
I've tryed the thing in the first link but it says "password incorect"
Click to expand...
Click to collapse
Check PM
Mike
hi brother mikechannon i am having the same problem here also, when flash original rom , it will stop at 13% or 14% , if flash radio , it wont even start , it will stop at 0% and fail , can boot into OS , but show NO GSM and no imei number ! please help
hanyean1 said:
hi brother mikechannon i am having the same problem here also, when flash original rom , it will stop at 13% or 14% , if flash radio , it wont even start , it will stop at 0% and fail , can boot into OS , but show NO GSM and no imei number ! please help
Click to expand...
Click to collapse
See my post above
Mike
i have tried to do this
Type the following commands (do not copy paste!!!)
USB> password 0000000000000000
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
but still not work , please help
any resolution to this matter?
i got the no radio issue... it loads up WM black but then freezes.
have tried the mtty thingy but also get an incorrect password. when i connect via usb i don't see a usb> prompt, just a cmd> prompt.
any advice?
have ipl 1.01 (i recall having 1.04 but seems it downgraded during troubleshooting)
spl 1.40 olipro.
i need help to, i've tried everything!! flash different ROMs radio's EVERYTHING!! some ROM flash but no radio, i try a radio and it will stop at 11% or not at all giving me a error 262. anyother ideas
Same problem.
Same problem here. I cannot flash a operator rom or a radio rom. It hangs at 11-14%. 11% using the sd card method, and 14% for the normal RUU method using an operator rom. Radio roms wont even try to flash, it hangs at 0%. I need to connect too the pc and use Mtty to get the OS Booting.
Hi,i have too same this problem my device is hp ipaq hw6915 how can i fix this?can samebody help?

Weird Brick, Up all last night researching

Hey guys, I need some advice. My phone sound went out and when I shut it down (via holding side power button in and touchscreening) it came up in bootloader. Reset it and it booted to wm6 for a few, though still silent I reset/ battery removal/soft reset a few times. After a few minutes of tinkering it would only come up in bootloader.
I used mtty to set 14 0 it says and soft (stylus bottom) reset and still tribars so then set 16 0 , same
So I have tried to reflash it several times, with crcs newest rom and the official att rom, pays newest, a bunch of different one, it looks like it takes. I have flashed to all these as well as schaps before and never had a problem.
So anyhow the flash looks like it takes, the meter on the pc and phones slowly tick to 100% and it comes up and says CONGRATULATIONS! You have been successful" or whatever on the pc, but then the phone just stays at bootloader. Exactly the same.
So again I use mtty to set 14 0 and 16 0 and soft reset.....
same thing.
I used some other mtty commands i cant remeber, like the format nand command, info 8 didnt show any bad blocks the radio command, i think rtask a and rtask b returned bad command.
When it powers on, it goes straight to tri bar bootloader screen with
HERM100
IPL-1.04
HERM100
SPL-2.10.olipro
at the top and
serial at the bottom, which changes to usb when I plug in.
after it is powered on it wont respond to any buttons and I must take the battery out to get it off.
Mtty seems to connect but then I cant get to the radio menu, i tried rtask a, rtask b, and even rtask 7 all returned then same invalid command message.
One interesting note. When I do the set 14 0 it says
Write Nand Success
HTCST ÚÈÒHTCE
The 16 0 is a clean write nand success.
This the same string that comes up for the info command that returns the crypto string.
This phone was a stock att cingular 8525 that i upgraded. I never did anything to unlock it. Do I need to? Is that why the crypto comes up when I try to set 14 to 0....but it does say succesful.
Well my download of another "official" att rom is done, I tried the one linked from the htc page, now i am trying one linked from somewhere on the board. I am off to flash it.
Thanks everyone for your time. Any help or insights would be greatly appreciated. I know alot about pc's but not phone stuff like cid stuff...

[SOLVED] Connection Error [262]. Stuck in bootloader (tri color) mode.

I'm new in these forums as well I'm new with flashing ROMs so obviously I messed up flash process and my device stuck in bootloader (tri-color) mode. This post I address to those unfortunate like me .
# Symptoms #
- ROM flash started and stopped at 17%. After recovery flash process stucks at 0% and pops Connection Error 262. Device is stuck in bootloader mode not possible to flash anything, hard reset does not help, flash from SD card does not help either.
# Possible cause for that #
1. In bootloader mode device shows:
Code:
Pola100
SPL-1.25.0000
CPLD-2
means that Hard SPL was not flashed before flashing ROM file (if Hard SPL was flashed then in second line will be written SPL-2.20.Olinex.).
2. Connection between ActiveSync and device was not established when flashing ROM file.
Before to go any further please take your time and read Polaris Wiki to get familiar with glossary and acronyms used here.
PROCEED ONLY if flashing original ROM does not help, hard reset does not help and flash from SD card does not work.
# Solution #
1. Download MTTY software.
2. Kill ActiveSync (Press Ctrl-Alt-Del and stop rapimgr.exe and wcescomm.exe processes).
3. Plug Polaris into usb port (Plug directly not through hubs).
4. Start MTTY after chose USB from PORT dropdown list (if it is not listed there then ActiveSync processes were not stopped).
5. in window type: set 16 0 (enter cmd mode)
6. after type: task 8 (this will format phone)
7. after type: task 0 (this will restart phone. Not always necessary)
8. soft reset
This procedure can damage your phone. Use it as last resort.
Official source in french here.
Now before flashing any ROMs read carefully how to flash (not install!) Hard SPL.
# P.S. about install and flash termins #
This error with flashing happened to my due misunderstanding between notions of installing something on your device and flashing. In my opinion those are completely two different things. As for first I understand of running some cab or exe directly on device. So problem comes when people sees install Hard SPL en device as they try to find some cabs or exes to install directly on device or they just copy all files to device. To make things clear Hard SPL "installation" actually is ROM flash process which must be done with maximum caution, but those who did not read Wiki won't understand it.
Cheers, whitealien
BiG THX @ Whitealien.
works to 100% on my Touch Cruise.
I flashed under Vista Ultimate...
# Solution # ... addition from me for Vista users!
....
2. Start Windows Mobile Device Center and Deaktivate USB Connection and then start Task manager end kill
Process wmdc.exe.
Rest of whitealien. and have fun!
Thank you!!!!
I had given up on this, and was sure my only option was a warranty repair :O
always welcome
Thanks, you've saved my Polaris.
Mine didn't want to react anymore to the soft reset, so I replaced your instruction 8 with:
Cmd>boot
and that did the trick.
whitealien said:
1. In bootloader mode device shows:
Code:
Pola100
SPL-1.25.0000
CPLD-2
means that Hard SPL was not flashed before flashing ROM file (if Hard SPL was flashed then in second line will be written SPL-2.20.Olinex.).
Cheers, whitealien
Click to expand...
Click to collapse
I had exactly the same problem, for whatever reason went back to original SPL before HARD SPL.
I solved my issue by using back the original original HTC RUU_signed.nbh and flash it using the CustomRUU.
Thereafter, repeat the entire HARD SPL and flash the home cooked ROM.
Cheers.
For unbricking your HTC Polaris, you can try also a hard-reset (if it is related to a software error):
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
Thank you very much
you really helped
thank you again
mrfone2003 said:
Thank you very much
you really helped
thank you again
Click to expand...
Click to collapse
you are welcome.
Seems people are still falling for this error.
I'm has this error.
Solution (with SPL-2.20):
- kill ActiveSync (process, not uninstall)
- cable to USB on motherboard
- hard reset on phone
- connect to cable
- flash OFFICIAL rom
Two time I revive my Polaris.
help me please
hi.I have a big problem with my htc touch cruise when I installed a hard spl htc dedicate a Diamond.donc I had a white encrant after I did a hard reset since my htc no longer I have a black encrant are neither green nor orange but when I connect with the pc I am data interface and it does not recognized my htc. In my pay is not qualified repairman three non réparé.aidé unable to please me I tried the commands mtty.exe but does not c I do not really know how it works.
thank you for your patience and for help
thanks for the support
Thanks dudes for the great help you gave to recover my htc dual from bootloader screen. I am very happy to have my phone back. Thanks for everybody for the help they have provided generously. I appreciate alot. infact thousands times.
I think i have really messed up my phone. When opening mtty i select USB and press ok, then it says "can not open USB Port"
please help me, i have all the symptoms you explain. Stuck in bootloader, POLA200 SPL-1.25.0000 CPLD-2
i cant flash any roms and the original rom stops at 39%, i have redownloaded it countless times so its not the rom.
aaront1988 said:
I think i have really messed up my phone. When opening mtty i select USB and press ok, then it says "can not open USB Port"
please help me, i have all the symptoms you explain. Stuck in bootloader, POLA200 SPL-1.25.0000 CPLD-2
i cant flash any roms and the original rom stops at 39%, i have redownloaded it countless times so its not the rom.
Click to expand...
Click to collapse
Did you follow all steps from 1st post?
Did you kill all running ActiveSync processes?
I did indeed, i'm on vista so didnt have those particular processes going but followed the step from Aeroman and it still doesn't want to play. Any ideas?
managed to find a working XP machine and it worked a treat. Thank you so much.
thanks,this solved my pb
please help
Im having the same problem, im stuck in the bootloader but i didnt do anything for that to happen....this happened all alone withount any try to flash or do anything
it is saying
POLA100
SPL-1.28.0000
CPLD-2
when this happened i tried sodt reset and unpluging the battery b4 reading and searching here.
now i tried the steps showing in the first post and step by step .... the devise restart to the same bootloader like i did nothing ((( oh god im so upset please help me .... what to do ((((
wesram said:
Im having the same problem, im stuck in the bootloader but i didnt do anything for that to happen....this happened all alone withount any try to flash or do anything
it is saying
POLA100
SPL-1.28.0000
CPLD-2
when this happened i tried sodt reset and unpluging the battery b4 reading and searching here.
now i tried the steps showing in the first post and step by step .... the devise restart to the same bootloader like i did nothing ((( oh god im so upset please help me .... what to do ((((
Click to expand...
Click to collapse
What did you do to get there?
whitealien said:
What did you do to get there?
Click to expand...
Click to collapse
hey, im sorry for the late reply. it didnt notify me and now after posting several times asking for help in many threads by accident i bumped into this thread again to see that u answered and thank you so much.
now, what i did? this is the wierd thing, i didnt do anything, i went and back to see my phone stuck in bootload .... after this i tried almost everything i can find. from ur solution to flashing original rom to hrd spl to .........
now all gave an error except the original rom (polaris.1.28.415.2), it did went to 100% and device restarted to take me to my nightmare .... another bootloader screen am i suppose to search for polaris 1.28.0000?
i still have now the same writing shown.
please help me with this, its a nightmare .... is it totaly dead???
i managed to catch what it is saying b4 bootload screen (only when SD card is in place) it says no image file was found!!! in a very fast way and go to bootloader. in case the sd is not in place nothing happens and it goes straight to the bootloader

Device shows NO GSM when booting - R NONE

Hy all,
I have an HTC Advantage X7500 and i have this problem, the device shows R NONE when i am booting , and i don't have signal for phone.
I found this solution on hermes wiki.
The phone is unlocked and it have SPL 1.20
ROM : Athena Project Black Dual by PK 3.0 (SPL 1.2)
Problem 5: Device shows NO GSM when booting
* The radio stack is screwed, you don't get GSM signal and the phone says unknown SIM status
* Device won't start after trying to unlock it with HTC Universal Unlocker (HTC_Uni_SIM_Unlock_v1)
Here is how to fix it:
METHOD 1
1. Disable activesync on your computer by right click on activesync icon -> connection settings -> uncheck "allow USB connections".
2. Put your Hermes in bootloader mode
3. Connect device to computer using USB cable.
4. Open mtty.exe and select USB port, then connect.
5. Hit enter twice, you will see the "USB>" prompt.
6.
Type the following commands (do not copy paste!!!)
USB> password 0000000000000000
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
7. If the password does not work, try password BsaD5SeoA
8. Reset your phone and put it back in bootloader mode
9. If your bootloader version is different than 1.04 then Flash Bootloader version 1.04 (if you can't flash the bootloader version 1.04 (for what ever reason) and you have KITL enabled Rom, then there is final solution - PB_KITL_HERMES))
10. Flash the patched radio used to simunlock the Hermes
11. Your phone should be alive again
Can everyone tell if that trick works on x7500? i should try this?
Sorry for my english...
I also had problems with radio and my x7500, however during my forum research I did never encounter your advice as a possible solution.
Are you sure that another radio upgrade with r1.57 or 1.58won't help?
Setting something on a different device without even knowing its effect or even worse erasing data...I wouldn't do that.
Last radio that i instaled on device is 1.58 and nothing was happening.
I had exactly this problem on my hermes/tytn. Suddenly after a reboot it showed No Gsm message and had no signal. Tried other wm5/wm6 rom, tried flashing other radio roms but no effect. When I was flashing radio even though the process was reaching to 100% and the device rebooted, same message occured.
As a final and hopeless solution I tried a SuperCID ( even though my device was already supercid half a year ago)... and this WORKED!!! don't know or how but this definitely solved my problem. I then realised that the Cid process downgraded the radio to a very old version. After that I flashed a newer radio version and my device came back as before.
Isn't there a SuperCID tool for Advantage? I don't recomend you to use the tool intended for hermes, don't mess too much with the radio rom or you will get a brick instead of ppc. As a consolation, your problem is almost 100% a software error, not a hardware malfunction (as long as you din't dropped or smasshed your device), so if you'd have the appropriate tool you should be able to fix it at home
Only supercid prog for the Athena I'm aware of is the original unlocker (thread found here). Tough choice, since you'd have to hard reset too...:-(
Perhaps you should try to send a pm senior member cmonex, if anyone can help you with the bootloader and mtty commands then its cmonex.

XDA manipulator on Polaris/Touch Cruise

Hi everybody,
I recently bought a serial-to-miniusb cable on ebay and am expecting it to arrive in a couple of days. My intention is to reset the life timer/call duration on my polaris by using the xda manipulator. I would like to hear your opinion on this. Can I try it riskfree? Will it work?
Thanks!
buekly said:
Hi everybody,
I recently bought a serial-to-miniusb cable on ebay and am expecting it to arrive in a couple of days. My intention is to reset the life timer/call duration on my polaris by using the xda manipulator. I would like to hear your opinion on this. Can I try it riskfree? Will it work?
Thanks!
Click to expand...
Click to collapse
Use Mitty.exe instead to RESET CALL TIMERS.
Read the guide and software are on the forum here: http://forum.xda-developers.com/showthread.php?p=2027058#post2027058
XDA Manipulator is very unlikely to be able to reset the counters on a Polaris and trying it would be very risky.
Thank you carryo,
So it seems I will have to install olipro 1.10 . Could you please guide me through this step? I know how to turn the phone into bootloader mode. What next? Should I connect it to the PC via USB ?
Thanks again
and wouldn't it be dangerous to install this SPL olipro 1.10 on me device? I mean I am not a specialist and don't know, what's the difference between older and newer spl?
Hi buekly,
Careful that hardspl for htc hermes, tq
Well then, can anybody suggest another way to reset call timers? I have done a big search and found nothing useful...
just download that mtty.exe, flash HardSPL for Polaris and that's it
the rest is on the help page
Download ATcommander for your phone and try [email protected]=270F,270F should reset call timers to 0
buekly said:
and wouldn't it be dangerous to install this SPL olipro 1.10 on me device? I mean I am not a specialist and don't know, what's the difference between older and newer spl?
Click to expand...
Click to collapse
You should use the HardSPL for Polaris which instead of olipro 1.10 which was a version or an older phone. You can find the file and instructions on the Sticky thread in the Polaris Upgrading etc. section. HardSPL won't damage your phone and will make sure that you can easily recover from anything else you change.
Then use Mitty.exe to reset the counters.
OK, now this is getting more and more interesting. Let me tell you about my progress. I made a Hard SPL for my Polaris. Then, I ran Atcommand. I insterted the following:
ate1----> 0
ate0----> OK
[email protected]=270f,270f ---> Error
When I saw that error, I remained quite disappointed. However when I checked the call duration in settings/device information I saw it was 00:00:00. But also, I saw in Identity that the phone doesn't have an IMEI number. So, I inserted a SIM card, made a call and, when I checke again, I saw that all the information was back, i.e. call duration back to 40 hours, IMEI reappeared. Why is that happening? These commands seem to oinly apparently remove the call duration, but when you insert a sim card, everything is back.
I tried another option, through MTTY. I disabled USB connection in Sync, turned the phone into bootloader mode, connected, ran MTTY, selected USB. But when I enter rtask b, see what I get below in the image. And that's it! After this text appears, I can't type anything else. I have to restart the MTTY.
So please help with any suggestions, cause I'm already run out of them. Thanks
which spl are you using does your spl say security unlocked at the top? If not try this one http://forum.xda-developers.com/showthread.php?t=351964 .I just use ATcomander to reset my timers When you use rtask b it just puts the phone in diagnostic mode you can proberly connect via a com port (after installing drivers) but i dont think we can use many AT commands with the polaris spl.
meknb said:
which spl are you using does your spl say security unlocked at the top? If not try this one http://forum.xda-developers.com/showthread.php?t=351964 .I just use ATcomander to reset my timers When you use rtask b it just puts the phone in diagnostic mode you can proberly connect via a com port (after installing drivers) but i dont think we can use many AT commands with the polaris spl.
Click to expand...
Click to collapse
yes, I used namely this spl and this I told you what happened. Do you also have a polaris and it worked reseting timers on yours?
Yes i have a polaris and have just reset the timers with ATcommander using [email protected]=270f,270f,ATcommander should return with a 0,now all timers a 00:00:00.
The only thing i can think of is i dont think hard spl fully security unlocks under mtty try "rtask a" then "setinfo" and see if your SECU_FLAG=0.
Also what radio are you using?
no really, it isn't working:
1) when i type ate1, it gives 0, then atv1, it gives OK, then [email protected]=270f,270f it gives ERROR. I'm run out of options. I mean there's something wrong with the last command. Maybe I should change it or what? Maybe I should enter another value? I tried [email protected]=9999,9999 it also shows ERROR.
2) I tried "rtask a" in mtty, but it shows the same text as in "rtask b" (see previous attatchment).
My radio version is 1.59.42.15
OK, I tried checking secu flag
I typed "[email protected]?AA" it showed "@secu_flag 1 0" What does it mean?
@secu_flag 1 0 means your phone is not fully security unlocked i can't remember how i got mine to secu_flag 0 it was using [email protected]=2,0 or something like that.I'll have a look how, you dont need the ate or atv commands there just for displaying results.
@secu_flag 1 0 means your phone is not fully security unlocked i can't remember how i got mine to secu_flag 0 it was using [email protected]=2,0 or something like that.I'll have a look how,
Click to expand...
Click to collapse
Thanks, I'm waiting for your assistance!
you dont need the ate or atv commands there just for displaying results.
Click to expand...
Click to collapse
OK then, why are the timers then resetting temporary after I introduce these commands? By temporary I mean they are back again when I insert a sim card. And also, after I introduce these commands IMEI disappears in system/device information/identity. It says "IMEI not support", and when I dial *#06# I get "Failed". When sim card inserted or phone restarted - everything reappears.
Right i found [email protected]=7,1 relocks security setting,and [email protected]=7,0 unlocks them,if [email protected]=7,0 doesn't work with your radio use the polaris unlocker and flash OliNex patched radio go through the all three steps then try [email protected]=7,0 and then [email protected]=270f,270f,I tried reseting the timers when locked and got a error,so with some hopes that will work for you ,Then flash your radio back when finished.
meknb said:
Right i found [email protected]=7,1 relocks security setting,and [email protected]=7,0 unlocks them,if [email protected]=7,0 doesn't work with your radio use the polaris unlocker and flash OliNex patched radio go through the all three steps then try [email protected]=7,0 and then [email protected]=270f,270f,I tried reseting the timers when locked and got a error,so with some hopes that will work for you ,Then flash your radio back when finished.
Click to expand...
Click to collapse
do you mean I should use this one http://forum.xda-developers.com/showthread.php?t=375338 ?
I downloaded it, however by the end of the thread I can see a lot of complaints from users, claiming that the signal either disappeared or reduced by 80% after using it. Have you tried it?
Yer thats the one i used,as i said flash your original radio back after you have finished to 1.59.42.15 or whatever you where using because i think olinex radio is just patching the simlock i think ? but is not very good for everyday use.

Categories

Resources