Hi guys
After install of Cyberon Voice Dialer instead Voice Commander on ROM 0.67 Bepe, I have small problem with LED indicator of BlueTooth. He dont work.
Before it all was right.
What happend???
Mine is doing the same thing after loading operamini 4.1! Stock Rom-
Related
Hi,
here's the replacement for the bluetooth icon shown in the taskbar.
It doesn't improve anything. It just contains other BT icon set... ehm... which I just drawn.. )))))
It should run on WM2003SE devices with MS BT stack, but i only tested it on my XDA2 with 2.06SE
comments are welcome...
buzz
thx
IT WORKS GREAT!!! THX Buzz_lightyear
Good Work Buzz!
Definitely looks a lot better than stock!
Re: thx
xp said:
IT WORKS GREAT!!! THX Buzz_lightyear
Click to expand...
Click to collapse
hehe, nazdar, teba som cital tusim niekde na ce4you.cz ... )))
buzz
and how do you switch back to the original ? by uninstalling the cab ?
snorlax said:
and how do you switch back to the original ? by uninstalling the cab ?
Click to expand...
Click to collapse
It is not that easy, coz the dll is used by the system and locked for deletion. So if you just uninstall it, it says, that it can't delete it...
You must edit your registry manually to disable my dll first and then uninstall it from Start -> Settings -> System -> remove programs.
It's a bit hard to deal with these system files. It is not like if you have some regular app, which you just install and then uninstall... (
1. Correct your registry to default:
[HKEY_LOCAL_MACHINE\Services\BTIcon]
"Dll"="BTIcon.dll"
2. Reset
buzz
have been having this missing BT icon since I first had my JAM. Previously Buzz's headset enabler brought my BT icon back but after a hard reset and install the BT icon is missing again even with Buzz's headset enabler. Will try this replacement BT service cab and report.
still no BT icon for me
BT Icon sometimes doesn't load after soft-reset
Hello Buzz! 8)
Fine work with your Icon... I have found the new icon after flashing my Italian Qtek 2020 to the ROM cooked by Dr.Stein for Brix03 with WM2003SE... in fact in his extended ROM there is your CAB. But Sometimes the Icon disappear, and more on, about 50% times I make a softreset, your Icon doesn't appear in my tray. But Bluetooth works smooth, the same. How can I start the icon independently? Thank you!
Cristian :wink:
Re: BT Icon sometimes doesn't load after soft-reset
tesking said:
Hello Buzz! 8)
Fine work with your Icon... I have found the new icon after flashing my Italian Qtek 2020 to the ROM cooked by Dr.Stein for Brix03 with WM2003SE... in fact in his extended ROM there is your CAB. But Sometimes the Icon disappear, and more on, about 50% times I make a softreset, your Icon doesn't appear in my tray. But Bluetooth works smooth, the same. How can I start the icon independently? Thank you!
Cristian :wink:
Click to expand...
Click to collapse
...will take a look at it...
buzz
is there any possibility to turn the led red when I receive a sms? now it blinks red only to missed calls and other notifications, but not to sms.
on the modaco - forum anyone has developed a tool, that change the leds of the Kaiser..
but there is not so much "free changeability" in this program..
maybe it will also work in trinity.. but no warranty
here you can find it
but i will develop a program which changes the leds like i want ;-)
[EDIT]
oh.. i saw, that its a new version since Dec, 31 2007 ;-)
i will also try that again ;-)
yes, it works on trinity, thank you very much. though I can`t change the led color in red for sms, it is a pretty cool tool.
Alexandru_unicul said:
yes, it works on trinity, thank you very much. though I can`t change the led color in red for sms, it is a pretty cool tool.
Click to expand...
Click to collapse
Perhaps I am not understanding the problem, but have you tried "Settings", "Sound and notifications", "Notifications", "Event" - there you can choose sound, led and vibration action whenever you receive a SMS (or any other event).....!?
I have set my device to vibrate and then flash the red LED for an unlimited time, whenever I receive a SMS or mail...
Regards,
theknf
Black Trinity
MARY 3.3.5
Radio 1.50
my version of firmware does not have led option for sms income... anyway, phone alarm seems to resolve all my wishes, and far beyond that
Is it possible to make a small tool that shows a small indication at the taskbar if the Bluetooth is on or of?
I use the windows dialler pad because the ring delay is lower than the HTC dialler.
But than you will have no Bluetooth indication.
It would perfect if the indication is very small. I don’t need a icon because this will waste the small place of the task bar.
Just a blue dot like the white dot that appears when Gsen is active.
Have a nice day
Thomas
Sorry for my English. I tried my best
I'm very much in favour of it. Have the same problem!
Me too please.... I have requested this before, but no luck yet.... I now use a programme called "bluepower" which turns on the bluetooth whenever my diamond is being charged. So when I am in my car and my phone is in the cradle, I know bluetooth is on. I don't need an indicator in the taskbar as I KNOW it is active. Therefore I can stick to the windows dialer for the same reasons as you.
I found this after a very quick google. Tested and working fine on my Diamond.
http://www.careace.net/2009/04/17/bluetooth-icon-patch-for-samsung-windows-mobile-ppcs/
I've also added the information to my WM dialer skin thread. )
Juhu, it`s works!!!
Hi Guys
I am using Iconsoft Phonex as my dialer. Its a super dialer. My problem is it doesnot integrate with the People tab provided on Touch flo. Clicking on the call button in the people tab doesnot initiate a call. It appears to become a dummy if i have Phonex running. I think it is because TF3D doesnt know it needs to use Phonex dialer to initiate the call. I am sure there is some registry key i need to modify to get this working.
Anybody aware of this? Any known fixes available? This would make my phone perfect!
I am on Dutty 3.3 XT ROM.
cheers
Raz
I'm usingthe stock ROM, PhonEx 1.4 and what you're describing works OK for me. Trying my home landline from TF3D/ People dials home and goes straight into the PhonEx dialling screen. I know that this is no consolation to you at the moment but I would try a complete uninstall and reinstall. HTH.
micken thanks for the reply. I just did an uninstall, reset, reinstall reset... still the same problem... maybe its the rom version i use? i never tried it with the stock rom i had.
its such an annoyance!
One thing.. when you disable phonex, do you get the standard wm dialer working in all its glory? For me the dialer comes back but i cant see the call list in the dialer.. its all blank, though i can dial and make calls and even scroll down the blank list!
i have same problem
Hi people,
I have a problem with the phone canvas slider (not tachi phone canvas) with a WM6.5 (my own rom cooked)
When an incoming call happen, an incall popup appears few seconds and after the slider appears. I want to disable this pop up but how ?
I have a second problem : When lockscreen is activated, new sms are not notified (by a ring or vibrate) until the screen is turning on. And when an incoming call happen, it waste some seconds before the phone is ringing, how to short this delay ?
Thanks for your help and sorry for my english.
as far as i know HTC phone canvas doesn't work with WM6.5 for now because of that popup/lock screen issue. Best option for now is use the default dialer with a nice skin
personally i like the ryon dialer here: http://forum.xda-developers.com/showthread.php?t=508920
OR just don't lock your phone and use standby instead that way you should be able to use the HTC phone canvas + Slide to unlock
as for text messaging and notifications i have same issue where messages and notifications don't make any noise/vibrate until screen is turned on (usually phone is in standby and locked state)
so +1 if someone has a fix for this
thanks averma
For lockscreen, I removed the animation (the slide to unlock) with the cpr files. Now, it's like on WM6.1 with the WinMo locker but it works well with calls or sms.
For the dialer, I finded how to fix the issue when we scroll contacts in the dialer but this popup stay there.
I tried the tachi phone canvas but this popup appears just one time, quickly.
try this cab..i got it from ppc geeks..so no thanks to me just passing it along. Its seeming to work for most people though. I had the problem with a custom dialer, and the original WM incoming call notification bubble pops up. Worked for me...
Thanks tf2d I'll try that and I tell you if it works
it seems to work. Thank you very much tf2d and thanks to calkulin to find this reg tweak.
Hey, this cab should be on all 6.5 roms it's working with tachi dialer, and the ring delay seems to be better too;
bye bye popup
Thks Calculin, Averma and Faouzy to ask question
Yes ric69, I've spend so many times to find out the solution and it's only two reg entries.
Thanks again to all
Any word on how to fix the sms + notifications problem in the 6.5 lockscreen (other than using a different lock screen)?
ps thanks for cab and info on tachi dialer, works great
indeed thanks to caulkin..and your welcome
faouzy42 said:
thanks averma
For lockscreen, I removed the animation (the slide to unlock) with the cpr files. Now, it's like on WM6.1 with the WinMo locker but it works well with calls or sms.
For the dialer, I finded how to fix the issue when we scroll contacts in the dialer but this popup stay there.
I tried the tachi phone canvas but this popup appears just one time, quickly.
Click to expand...
Click to collapse
Hi, could you pls. tell how you fixed scroll contacts issue in the dialer ?
cheers,
rishi2504
tf2d said:
try this cab..i got it from ppc geeks..so no thanks to me just passing it along. Its seeming to work for most people though. I had the problem with a custom dialer, and the original WM incoming call notification bubble pops up. Worked for me...
Click to expand...
Click to collapse
This is just perfect to me and work like a charm! Thank you so much!
rishi2504 : with the phone canvas, you need to use patched cprog.exe and tpcutil.dll in order to fix the scrolling issue. Make a cab (with wince or cabarc) or replace it with total commander, resco explorer, ...
http://forum.xda-developers.com/attachment.php?attachmentid=213068&d=1249522428
faouzy42 said:
rishi2504 : with the phone canvas, you need to use patched cprog.exe and tpcutil.dll in order to fix the scrolling issue. Make a cab (with wince or cabarc) or replace it with total commander, resco explorer, ...
http://forum.xda-developers.com/attachment.php?attachmentid=213068&d=1249522428
Click to expand...
Click to collapse
Thanks for your response. Will check and get back ...
cheers,
rishi2504