hello friend
i tried to update may rom but it reset my whole things. it showing 3 coulor on screen.also showing IPL 1.00 SPL 2.20 on red bar . i can not open my os. i done soft and hard reset also. it showing press send to restore factory default, i pressd the green button it showing format fat partition and format is complete. now it showing same thing (3 coulor bar) on screen. please help me waht i have to do now. my device is not working.
i have imate jamin (htc prophet). (before this when i on my device it shows HTC innovation on screen)
please help me.
Thanks.
You will need to flash a new ROM. I have written a page on the wiki which will save me having to write it out again, read it and then ask questions should you have any.
Link: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
Related
i have tried to upgrade my htc p3300 and now it doesn't open. it comes out the htc start screen with the red numbers and nothing else .i've tried three button format but nothing .pls notice tha i cannot use active sync .
search the forum and you will be impressed!
http://forum.xda-developers.com/showthread.php?t=327366#2
More info needed.
Did you run USPL?
On the screen with red numbers, what does it say against SPL?
What ROM were you upgrading too?
Hi,
Sorry if this is the wrong place to post this but i could not find an answer for this in this section or general section -- The problem is this i upgraded to wm6 from wm2003 and everything was fine then it started it freeze ocationally so i thought i'd give it a hard reset as ther was no where in the tutorial that said that after flashing you could not hard reset now the phone is stuck on the O2 screen where the IPL & SPL are displayed
IPL=1.00 &
SPL=1.01.0109 &
GSM=0.3.28.60
I know the IPL/SPL were at 2.61 before that
Can anyone tell me how to get out of this or is the phone now bricked?
Yes, you cant hard reset because the htccoldboot.dll is not there, its not brick, you got the right SPL, just reflash again, refer to my guide on my siggy
Thanks
great that worked out fine gave me a scare - now it's all back up and runnung apart from the camera
For those stuck with this same problem, please re-flash starting from step 7 of karhoe's instructions to upgrade to WM6.
After installing a few applications and having to reboot, my SMT5600 would not connect via ActiveSync, nor show any network carrier and none of the menu keys worked (Start & Contacts). While troubleshooting I browsed to a forum suggesting I try a hard reset.
Never got a proper hard reset and ended up stuck at the initial screen showing the IPL / SPL / HIVE and Partition info.
Followed karhoe's step 7, with phone turned off, held camera button down and plugged in USB cable. Followed remaining instructions.
Note: the "type 'l c:/os.bin' " step is done in the mtty.exe screen that pops up (and not on your PC's command prompt ).
Thanks karhoe,
Good luck to everyone,
Jawad
hi guys, first post on here, so go easy on me..heh heh
ive got my SPV M700....locked to ORANGE....and ive flashed it as per instructions with various roms...no probs.
only thing is, now when it reboots, whatever rom i use, i have a couple of issues with the display...
keypad wont show up when i press the "phone" button....all i see is a white screen where the keypad should be.
also, when i apply a theme, i only see the bars at the top and bottom of the screen change colour......not the "wallpaper" or "desktop".
no wallpapers or images i add to the desktop show up....
weird, as everything else works....wi fi, GPS..(dependant on rom used), text messaging, all work..
its just that themes and keypad dont show??
can someone PLEASE help me???
if there is anything i can use to basically wipe the lot off, and start again, il give it a go...even re flashed the original orange rom on here.....and the same thing happens.
when it reboots, the orange screen ...(or whatever rom boot screen i use) flashes up.......then where the green windows screen is supposed to show, i get a white screen, followed by the desktop loading....which is also white.....
Upgrade your hard spl to olipro 1.30, and use mtty to format your ppc, in this way you can have a clean flash of yr rom and avoid issues...
for mtty.exe you can find different topics on xda...
(credit goes to Eliasweb )
that worked!!!
many thanks my friend..much appreciated.
Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.
hard reset
Jeet8626 said:
Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.
Click to expand...
Click to collapse
do hard reset
i had done hard reset also
Try to bootup without the SD card (and may be SIM), I had this problem with my Vox, the SD Card was corrupted. After formatting the SD Card, everythig became normal.
Best of Luck
Same problem
Jeet8626 said:
Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.
Click to expand...
Click to collapse
Hi!
i have the same problemwith my P3400
i have made the upgrade to wm5 to wm6.1
the pda at the first time has booted and i have configured the regional time and the pen alignment until the the screen that says Setup complete, click to proceed (or something like this).
After this, it gets stuck on the windows mobile 6.1 boot screen
i have made the re-update with the same rom update.
the problem persists!
I have made with/without sd card and sim.
Now when it boots apears
ONBL 1.07.0000
SPL 1010.olip
GSM 02.84.90
OS 1.17.0.0
then changes for the wm6.1 boot screen
and stucks here
S/n-SZ716FW06338
XT01
GENE 100 (old gene i think)
please help me
thanks in advance
Pedro Matos (from Portugal)
matosmatos said:
Hi!
i have the same problemwith my P3400
i have made the upgrade to wm5 to wm6.1
the pda at the first time has booted and i have configured the regional time and the pen alignment until the the screen that says congratulations, click to proceed (or something like this).
After this, it gets stuck on the windows mobile 6.1 boot screen
i have made the re-update with the same rom update.
the problem persists!
I have made with/without sd card and sim.
Now when it boots apears
ONBL 1.07.0000
SPL 1010.olip
GSM 02.84.90
OS 1.17.0.0
then changes for the wm6.1 boot screen
and stucks here
S/n-SZ716FW06338
XT01
GENE 100 (old gene i think)
please help me
thanks in advance
Pedro Matos
Click to expand...
Click to collapse
i have done it!
Now i have the wm6.1
i found another rom update! (coooollll!!!!)
heheehehehhe
thanks anyway!
i have the same proplem you had can you tell me how you done it with new rom espiecly i cant flash room and i cant do anything
thanks
for ur info @matosmatos
hi
as per the numbers quoted by u urs is a old gene so falsh roms for old gene only this is just for ur info
goodluck
matosmatos said:
i have done it!
Now i have the wm6.1
i found another rom update! (coooollll!!!!)
heheehehehhe
thanks anyway!
Click to expand...
Click to collapse
@smb_do
hi
assuming ur phone is just dead ie just blank screen do this
1.power off the phone remove batter and press the power button 3 secs
2.put batter back in to the phone
3.Press camera button and then power on at the same time u will get tricolor
used usb and Flash new ROM
or press camera button and do soft reset using stylus this will also give u the tricolor use USB and flash new ROM
goodluck
smb_do said:
i have the same proplem you had can you tell me how you done it with new rom espiecly i cant flash room and i cant do anything
thanks
Click to expand...
Click to collapse
thasnffffffffff
Im so so saaaad
I try avery thing hard reset , now roms every time it accept the now rom and whine it restsrts again tha same problem it stop at
ONPL 1.07.0000
SPL 1.07.oref
GSM 02.79.90
OS 1.9.1.1
please help me send me at
ahmedrefaat82/hotmaill.com
gene hanges at start up page onyl (after rom Upgade)
I am also facing the same problem. I have old Gene. I had upgaded it to
Pro User's ROM WM 6.1 Sumit
Everything was running fine till I soft reseted the device. On soft reset it stucks at the start up screen
On boot it shows following
ONBL 1.07.0000
SPL 1010.olip
GSM 02.79.90
OS 1.17.0.0
Then it shows the windows animations and then it hangs.
This has happned to me twice.
I had installed following applications after the ROM upgrade. Does any application creating a problem
1) HTC Home (6 tab plugin)
2) S2U2,S2P,S2V
3) Quick Menu
4) Opera Mini
5) TCPMP with many codecs
satishgosavi said:
I am also facing the same problem. I have old Gene. I had upgaded it to
Pro User's ROM WM 6.1 Sumit
Everything was running fine till I soft reseted the device. On soft reset it stucks at the start up screen
On boot it shows following
ONBL 1.07.0000
SPL 1010.olip
GSM 02.79.90
OS 1.17.0.0
Then it shows the windows animations and then it hangs.
This has happned to me twice.
I had installed following applications after the ROM upgrade. Does any application creating a problem
1) HTC Home (6 tab plugin)
2) S2U2,S2P,S2V
3) Quick Menu
4) Opera Mini
5) TCPMP with many codecs
Click to expand...
Click to collapse
Not likely, try a hard reset and see if your issue is solved
Addicted2xda said:
Not likely, try a hard reset and see if your issue is solved
Click to expand...
Click to collapse
I had tried that also but not able to recover I had to burn the ROM again .
I am scared now to soft reset my gene. Never know when it will get hanged again. (pls note that it does not hang on every soft reset).
I liked the new ROM (6.1 pro Sumeet) so much. It is fast and have left enough room to add/execute other applications. I have read so many good comments about the ROM. I do not want to change it to any other version.
Please.. please try to get some solution.
Thanks in advance.
regards
Satish
It Worked
Thanxxxxxxxx
Hi
I am sure you will all tell me there are a million threads like this out there and to follow the steps previously posted but I think I have tried everything.
So I have a touch HD.
If I hold the volume + and - and press the power button I sometimes get it to enter the menu where it will go to the hard reset menu. If I then press the + volume button as requested this does nothing and then it returns to the red, green, blue and white screen looping round.
If I plug the phone into the power or my PC I get the red, green, blue and white screen looping continuously. I cannot get the phone just to charge.
I have been to the HTC site to get a ROM using my serial number but it tells me that it is invalid for my type of phone??!!
I have downloaded numerous ROMS from this site and they just wont install. In the installation procedure it doesn't recognise that I have a ROM there so it is obviously corrupted. At the end of this installation not working I have tried the recovery option which it says completes but then it wont installation the ROM after this and so continues to loop in the red, green, blue and white screen.
My SPL version is 1.14.0000
A step by step solution would be massively appreciated.
Thanks for reading!!
Just for further info. When I plug the phone into the PC I can't get it to connect via active sync as it just keeps reloading the Blue, Red, Green and White screen.
I have tried the mtty.exe fix running relevant tasks but the connection isn't there for long enough without it reloading the 4 coloured screen
help!!!!!!!!!!!!!!!!!!!!!!!!!!!
Finally managed to 'update' the ROM using RUU_BlackStone_Orange_UK_1.14.405.3 how my phone still stays on the red, green, blue and white screen argh!!!
I really thought that once it had installed that would be it fixed!!
Any suggestions?
Someone please help!!
Can anyone help as I really dont know what I can do!
The only thing that I can get to communicate with the phone is the standard orange ROM. Even though this has supposedly installed correctly I am still stuck on the Tri-Colour screen!!
I advice you to do the Task29..
This completely erases your system partition and you can flash a new fresh ROM...and a new radio of course since the Task29 removes everything...
I will give you just a little guide - there are millions of guides how to flash.
1. Download: Radio 1.17 (!!!FOR BLACKSTONE!!!), USPL 2.5, ROM you wish to flash, Task29
2. In the bootloader (RGB screen) connect your USB cable and wait until "serial" changes to "USB", then run USPL and wait...phone reboots and you will see it say USPL at the top...
3. Run task29 with radio 1.17 (*.nbh file) in the same folder - google "how to task 29 xda" or something like that and you should find a guide (I think I read a decent one in Leo forum)
4. After you have Task29ed and flashed radio 1.17 enter bootloader again, run USPL and flash the ROM you want...I recommend Topix 3.6 for example - I use that one and it is pretty good.
You should be OK after doing this...google a lot while going through this guide because you will probably get stuck at some points...this is not detailed guide...just a simple one...
I hope it helps you.
Sopis is a HTC God!!!
Sopis!!!
Thankyou so very very very very very very very very very much!!!
Absolutely brilliant!!! I really didnt think I was going to rescue my phone!!
If your ever in Leeds I owe you a pint!!!
Thanks again